AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CRANKSHAFT SERVICE THRUST PLATE--Field Installation Provides a Thrust Plate to be used in the event a "Wide" Thrust Journal Crankshaft is installed in a Spacer Plate Cylinder Block 12G


BASIC ENGINE
CRANKSHAFT GP
PISTON & ROD GP
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M02629-07710 (MACHINE) POWERED BY 3306 ENGINE SEBP1076 12G 61M   (1973)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GROUP
2P-6220 CRANKSHAFT GROUP
CRANKSHAFT GROUP
2P-6220 CRANKSHAFT GROUP
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CRANKSHAFT SERVICE THRUST PLATE
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
2P-6223 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
 

#SEBP10760020
 

CRANKSHAFT SERVICE THRUST PLATE

CRANKSHAFT SERVICE THRUST PLATE--Field Installation
Provides a Thrust Plate to be used in the event a "Wide" Thrust Journal Crankshaft
is installed in a Spacer Plate Cylinder Block
SEBP10760020 SEBP1076
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7N-9343 [1] THRUST PLATE  
 

#SEBP10760021
 

4N-7693: CRANKSHAFT AS

4N7693 CRANKSHAFT ASSEMBLY--Field Installation
c229687 SEBP1076
4N7693 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3858 [1] SLEEVE-WEAR  
2. 9F-2247 [6] PLUG  
3. 5H-2671 [1] KEY-WOODRUFF  
4. 7N-4525 C [1] GEAR-CRANKSHAFT (40 TEETH)  
5. 2P-3859 [1] SLEEVE-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10760022
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP10760022 SEBP1076
None CRANKSHAFT BEARING REPLACEMENTS Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP10760023
 

2P-6223: SEAL GP-CRANKSHAFT

2P6223 CRANKSHAFT SEAL GROUP
Serial No. 3N34801 to 3N35352 inclusive
c117077 SEBP1076
2P6223 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9022 [1] SEAL  
2. 5S-9021 [1] SEAL  
 

#SEBP10760024
 

2P-6224: SEAL GP-CRANKSHAFT

2P6224 CRANKSHAFT SEAL GROUP
Serial No. 3N35353-Up
c228583 SEBP1076
2P6224 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3216 C [1] SEAL GROUP  
    (Includes)
  9S-3111 [1] SEAL  
2. 2P-3858 [1] SLEEVE  
3. 5S-6296 [1] SEAL  
4. 2P-3859 [1] SLEEVE  
  C   INDICATES CHANGE
 

#SEBP10760025
 

4N-4028: PISTON & ROD GP

4N4028 CONNECTING ROD AND PISTON GROUP--6 Required
Engine Serial No. 3N34801 to 3N89426 inclusive
c222700 SEBP1076
4N4028 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9804 C [1] PIN-PISTON  
2. 9H-4015 [2] RETAINER-PIN  
3. 6N-8061 C [1] ROD AS-CONNECTION  
  7S-9347 [1] BEARING  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
5. 7M-7821 [1] BEARING-CONNECTING ROD (STANDARD)  
  2S-0502 [1] BEARING-.254MM US (.010IN)UNDERSIZE  
  2S-0503 [1] BEARING-.508MM US (.020IN)UNDERSIZE  
  7M-7826 [1] BEARING-.762MM US (.030IN)UNDERSIZE  
6. 8N-3181 C [1] PISTON GP  
7. 9S-7788 [1] RING-PISTON (OIL)  
8. 5S-6750 [1] RING-INTERMEDIATE  
9. 7S-8378 [1] RING-PISTON TOP  
  7S-9404 [1] RING GP-PISTON  
    (INCL COMPLETE SET
    OF RINGS FOR ONE
    PISTON)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10760026
 

2P-6202: CAMSHAFT GP-SINGLE

2P6202 CAMSHAFT GROUP
c226144 SEBP1076
2P6202 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3981 C [1] CAMSHAFT  
2. 7S-2204 [1] WASHER-THRUST  
3. 8S-1491 [1] LOCK  
4. 0S-0509 [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10760027
 

4N-4028: PISTON & ROD GP

4N4028 CONNECTING ROD AND PISTON GROUP--6 Required
Engine Serial No. 3N89427-Up
c307113 SEBP1076
4N4028 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9804 [1] PIN  
2. 9H-4015 [2] RETAINER  
3. 8N-1984 RC [1] ROD ASSEM.  
    (Includes)
  8N-1985 [1] BEARING  
4. 1P-9956 [2] BOLT  
  5S-6348 [2] NUT  
5. 8N-8220 C [1] BEARING (Standard)  
  8N-8221 CA [1] BEARING .254mm(.01 in.)undersize  
  8N-8222 CA [1] BEARING .508mm(.02 in.)undersize  
  8N-8223 CA [1] BEARING .762mm(.03 in.)undersize  
6. 8N-3181 [1] PISTON GROUP  
    (Includes)
7. 9S-7788 [1] RING (Oil)  
8. 5S-6750 [1] RING (Intermediate)  
9. 7S-8378 [1] RING (Top)  
  7S-9404 [1] RING GROUP  
    (Consists of Complete Set of Rings For One Piston)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  A   NOT PART OF THIS GROUP
 

#SEBP10760028
 

2P-6476: CYLINDER HEAD GP

2P6476 CYLINDER HEAD GROUP
Engine Serial No. 3N34801 to 3N56680 inclusive
4N7446 Head parts are shown on Page 13
c209100 SEBP1076
2P6476 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-6449 C [6] VALVE (Exhaust)  
2. 2A-4429 [24] LOCK  
3. 5S-5912 [12] RETAINER  
4. 7S-7144 [12] SPRING  
5. 5S-6795 [6] CHAMBER ASSEM.  
  7S-3206 [6] SEAL  
  5M-2667 C [6] GASKET 4.93 mm(.194 in.)thick  
  2S-8959 C [6] GASKET 5.66 mm(.223 in.)thick  
  2S-8960 C [6] GASKET 6.3 mm(.248 in.)thick  
6. 5S-6452 C [6] VALVE (intake)  
7. 4N-7446 Y [1] HEAD ASSEM.  
    (Separate Illustration)
8. 5S-6281 [1] GASKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10760029
 

2P-6476: CYLINDER HEAD GP

2P6476 CYLINDER HEAD GROUP
Engine Serial No. 3N56681 to 3N79562 inclusive
6N8889 Head parts are shown on Page 13A
c213460 SEBP1076
2P6476 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-6449 [6] VALVE (Exhaust)  
2. 2A-4429 [24] LOCK  
3. 5S-5912 [12] RETAINER  
4. 7S-7144 [12] SPRING  
5. 5S-6795 [6] CHAMBER ASSEM.  
  7S-3206 [6] SEAL  
  5M-2667 [6] GASKET 4.93 mm(.194 in.)thick  
  2S-8959 [6] GASKET 5.66 mm(.223 in.)thick  
  2S-8960 [6] GASKET 6.3 mm(.248 in.)thick  
6. 5S-6452 [6] VALVE (intake)  
7. 6N-8889 YC [1] HEAD ASSEM.  
    (Separate Illustration)
8. 5S-6281 [1] GASKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2005/12/26
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 12G :

CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
CRANKSHAFT GROUP
2P-6220 CRANKSHAFT GROUP
CRANKSHAFT GROUP
2P-6220 CRANKSHAFT GROUP
CYLINDER BLOCK GP
6N-8124 CYLINDER BLOCK GP
8N-6273 KIT-BLOCK HARDWARE
CYLINDER BLOCK AS
2P-8776 CYLINDER BLOCK AS
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
2P-6223 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
PISTON & ROD GP
4N-4028 PISTON & ROD GP
CAMSHAFT GP-SINGLE
2P-6202 CAMSHAFT GP-SINGLE
PISTON & ROD GP
4N-4028 PISTON & ROD GP
CYLINDER HEAD GP
2P-6476 CYLINDER HEAD GP

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.