7D6671 ENDBIT OVERLAY GROUP FOR USE WITH 6 INCH WIDE CUTTING EDGES AN ATTACHMENT 12G MOTOR GRADER

Part No	Qty	Parts name
4T-2243	[2]	CUTTING EDGE STRAIGHT 1.83 M (6 FT.)
		203.2 mm (8 in.) Wide & 25.4 mm (1 in.) Thick
4T-2244	[2]	CUTTING EDGE CURVED 1.83 M (6 FT.)
		203.2 mm (8 in.) Wide & 25.4 mm (1 in.) Thick
4T-2231	[2]	CUTTING EDGE CURVED 1.83 M (6 FT.)
		203.2 mm (8 in.) Wide & 25.4 mm (1 in.) Thick
4T-2232	[2]	CUTTING EDGE STRAIGHT 1.83 M (6 FT.)
		203.2 mm (8 in.) Wide & 25.4 mm (1 in.) Thick

#SEBP10760862

CUTTING EDGE REPLACEMENT

CUTTING EDGE REPLACEMENT--Field Installation
FOR USE WITH 4.27 m (14 Ft.) BLADE GROUP

SEBP10760862 SEBP1076

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
4T-2241	[2]	CUTTING EDGE STRAIGHT 2.13 M (7 FT.)
		203.2 mm (8 in.) Wide & 25.4 mm (1 in.) Thick
4T-2242	[2]	CUTTING EDGE CURVED 2.13 M (7 FT.)
		203.2 mm (8 in.) Wide & 25.4 mm (1 in.) Thick

#SEBP10760863

9D-9990: POWER BLADE ARRANGEMENT

POWER BLADE ARRANGEMENT

9D9990 POWER BLADE ARRANGEMENT--14 Foot
AN ATTACHMENT

SEBP10760863 SEBP1076

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9D-9780 Y	[1]	BLADE GROUP
9D-9965 Y	[1]	CYLINDER MOUNTING GROUP
Y		SEPARATE ILLUSTRATION

#SEBP10760864

9D-9965: MOUNTING GP-CYLINDER

MOUNTING GP-CYLINDER

9D9965 CYLINDER MOUNTING GROUP
Part of 8D9740 and 9D9990 Arrangements listed on Pages 332 & 353

c159230 SEBP1076

9D9965 MOUNTING GP-CYLINDER Parts scheme

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-1538	[4]	BOLT
	3B-4512	[4]	LOCKWASHER
2.	7B-2501	[1]	RING
3.	2D-6341	[1]	PIN
4.	9D-9665	[1]	BRACKET

#SEBP10760865

8J-7586: RIPPER AR

RIPPER AR

8J7586 RIPPER ARRANGEMENT
AN ATTACHMENT

SEBP10760865 SEBP1076

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8J-1658 Y	[1]	CYLINDER GROUP
8J-6995 Y	[1]	RIPPER MOUNTING GROUP
8J-7567 Y	[1]	RIPPER LINES GROUP
8J-7585 Y	[1]	RIPPER ARRANGEMENT
8M-4598	[1]	FILM 12G RIPPER
Y		SEPARATE ILLUSTRATION

#SEBP10760866

8J-1434: TOOTH GP-SCARIFIER

TOOTH GP-SCARIFIER

8J1434 TOOTH GROUP
Part of 8J7585 Ripper Arrangement shown on Page 355

c180067 SEBP1076

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-5325	[2]	COTTER PIN
2.	2K-6413 C	[1]	PIN
3.	9J-6586 C	[1]	SHANK
			- OR -
	9J-8913 H	[1]	SHANK (curved)
4.	9J-6583 C	[1]	PIN
	3G-9549 C	[1]	RETAINER
5.	9J-8910 C	[1]	TIP
	C		INDICATES CHANGE
	H		NOT PART OF 8J1434 TOOTH GROUP

#SEBP10760867

8J-7585: RIPPER AR

RIPPER AR

8J7585 RIPPER ARRANGEMENT
Serial No. 26V1-Up
Part of 8J7586 Ripper Arrangement listed on Page 354. 8J1434 Tooth parts are shown on Page 354
Note: One or two 8J1434 Tooth Groups may be added to convert to a Four or Five Tooth Ripper

c228182 SEBP1076

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8J-7024	[1]	RIPPER GROUP
			(Includes)
	8J-7023	[1]	CARRIAGE ASSEM.
			(Includes)
2.	4K-3034	[2]	BAR
3.	4K-3033	[9]	HOLDER
4.	4K-6302	[5]	HOLDER
5.	2K-0136	[2]	BOSS
6.	1L-6931	[4]	SCREW ASSEM.
7.	7L-6363	[2]	REFLEX MARKER
8.	4K-3151	[2]	PIN
9.	8S-9191	[4]	BOLT
	2K-4973	[4]	LOCKNUT
10.	3B-8489	[3]	FITTING
11.	4K-3004	[2]	BEARING
12.	2B-0947	[8]	BOLT
	1D-4719	[8]	NUT
13.	3B-4508	[10]	LOCKWASHER
14.	9J-0096	[2]	LINK ASSEM.
			(Each Includes)
15.	3G-2581 C	[2]	BEARING
16.	8J-7008	[2]	PIN
17.	2D-0626	[8]	SEAL
18.	4K-3150	[2]	PIN
19.	2K-0120	[1]	PIN
20.	0S-1585	[2]	BOLT
21.	2K-0703	[1]	BAR
22.	2B-2006	[2]	BOLT
	1K-6872	[2]	LOCKNUT
23.	9J-0095	[1]	LINK ASSEM.
			(Includes)
24.	3G-2579 C	[4]	BEARING
25.	5P-0093	[8]	SEAL
26.	8J-1434 Y	[3]	TOOTH GROUP
			(Separate Illustration)
27.	8M-3494	[1]	PLATE (serial no.)
	4B-4158	[2]	SCREW
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#SEBP10760868

8J-6995: MOUNTING GP-RIPPER

MOUNTING GP-RIPPER

8J6995 RIPPER MOUNTING GROUP--Type 1
Part of 8J7586 Ripper Arrangement listed on Page 354

c203507 SEBP1076

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1588 C	[2]	BOLT
2.	9M-2828	[10]	WASHER
3.	8S-9093 C	[10]	BOLT
4.	8J-6990	[1]	PLATE ASSEM.
6.	4K-3150	[2]	PIN
7.	9H-2374	[2]	BOLT
	2K-4973	[2]	LOCKNUT
8.	8J-7013	[2]	LINK ASSEM.
			(Each Includes)
9.	9J-0084	[1]	NUT
10.	9J-5376 C	[2]	BOLT
11.	9J-0090	[2]	PIN
12.	2H-6488	[2]	BOLT
	1K-6872	[2]	LOCKNUT
13.	9J-5347 C	[1]	BAR
14.	3B-4506	[2]	LOCKWASHER
15.	2J-6903 C	[2]	SPACER
	C		INDICATES CHANGE

#SEBP10760869

8J-7567: LINES GP-RIPPER

LINES GP-RIPPER

8J7567 RIPPER LINES GROUP
Part of 8J7586 Ripper Arrangement listed on Page 354

c228183 SEBP1076

For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-0505	[1]	ADAPTER
2.	3K-0360	[4]	SEAL
3.	9J-4175	[1]	HOSE ASSEM. (not serviced)
			For service furnish:
	9S-0671 CH		HOSE 50.8 in.(129 cm)
4.	8S-4055	[2]	COUPLING
5.	3S-8606	[2]	SLEEVE
6.	1S-0724	[1]	CLIP
7.	030-7948	[3]	ELBOW
8.	9J-4176	[1]	HOSE ASSEM. (not serviced)
			For service furnish:
	9S-0671 CH		HOSE 28.3 in.(72 cm)
9.	8S-4055	[2]	COUPLING ASSEM.
10.	3S-8606	[2]	SLEEVE
11.	2S-2053 C	[1]	CLIP
12.	0S-0509	[1]	BOLT
	1D-4717	[1]	NUT
	3B-4506	[1]	LOCKWASHER
	C		INDICATES CHANGE
	H		ORDER BY THE INCH