9S7978 HAND TOOL GROUP 8F9866 Grease Gun parts are shown on Page 425 Note: 2B9886 Jack is available AN ATTACHMENT 12G



SERVICE EQUIPMENT AND SUPPLIES
TOOLS
GASKET & SEAL KITS
CHARTS & FILMS

MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M02629-07710 (MACHINE) POWERED BY 3306 ENGINE SEBP1076 12G 61M   (1973)

SERVICE EQUIPMENT AND SUPPLIES

TOOLS
AIR INFLATION GROUP
9D-6440 AIR INFLATION GROUP
AIR INFLATION GROUP
2G-1616 AIR INFLATION GROUP
AIR INFLATION GROUP
2G-1616 AIR INFLATION GROUP
TOOL GP-HAND
9S-7978 TOOL GP-HAND
GREASE GUN AS
8F-9866 GREASE GUN AS
 

#SEBP10761040
 

9S-7978: TOOL GP-HAND

9S7978 HAND TOOL GROUP
8F9866 Grease Gun parts are shown on Page 425
Note: 2B9886 Jack is available
AN ATTACHMENT
c208786 SEBP1076
9S7978 TOOL GP-HAND Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  9S-1738 SCREWDRIVER  
    NO. 2 PHILLIPS
  1F-1157 SCREWDRIVER  
  5S-9566 WRENCH  
  5S-9567 EXTENSION  
  8F-9866 Y GREASE GUN (lever)  
    (Separate Illustration)
  2P-8250 STRAP WRENCH ASSEM.  
  1P-0545 GAUGE GROUP  
  5S-9568 SOCKET  
  8H-8581 GAUGE (Feeler)  
  5F-4764 PRY BAR  
  8H-8503 WRENCH (5/16" Opening)  
  8H-8505 WRENCH (3/8" Opening)  
  8H-8507 WRENCH (1/2" Opening)  
  8H-8508 WRENCH (9/16" Opening)  
  8H-8509 WRENCH (5/8" Opening)  
  8H-8511 WRENCH (3/4" Opening)  
  5P-6224 C WRENCH (11/16" Opening)  
  5P-1763 SOCKET  
  8H-8551 SOCKET (11/16" Opening)  
  8H-8552 SOCKET (3/4" Opening)  
  8H-8553 SOCKET (13/16" Opening)  
  8H-8554 SOCKET (7/8" Opening)  
  8H-8555 SOCKET (15/16" Opening)  
  9S-1730 SOCKET (1 1/8" Opening)  
  9S-1731 SOCKET (1 1/4" Opening)  
  8H-8536 SOCKET (1 5/16" Opening)  
  8H-8537 SOCKET (1 1/2" Opening)  
  8H-8541 SOCKET (1 7/8" Opening)  
  5P-6226 C SOCKET (1 5/8" Opening)  
  5P-6227 C SOCKET (1/2" Opening)  
  1P-5530 C SOCKET (9/16" Opening)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10761041
 

8F-9866: GREASE GUN AS

8F9866 GREASE GUN
Part of 9S7978 Hand Tool Group shown on Page 424
c108355 SEBP1076
8F9866 GREASE GUN AS Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 9F-2636 [1] NOZZLE AS  
2. 2M-2689 [1] COUPLER AS  
3. 9F-2638 [1] HOSE AS  
4. 9F-2637 [1] NIPPLE  
 

#SEBP10761042
 

GASKET KITS

GASKET KITS
SEBP10761042 SEBP1076
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  5P-9098 VALVE GRINDING  
    Serial No. 3N34801 to 3N79762 inclusive
  6V-2526 VALVE GRINDING  
    Serial No. 3N79763-Up
  5P-9099 CENTRAL AND LOWER STRUCTURE  
  5P-8768 SINGLE CYLINDER LINER  
  5P-9456 FRONT STRUCTURE  
    Serial No. 3N34801 to 3N35352 inclusive
  6V-1679 FRONT STRUCTURE  
    Serial No. 3N35353-Up
  5P-9457 REAR STRUCTURE  
    Serial No. 3N34801 to 3N35352 inclusive
  6V-1550 REAR STRUCTURE  
    Serial No. 3N35353-Up
  6V-1669 AIR COMPRESSOR  
    Serial No. 3N66000 to 3N69599 inclusive
  5P-8771 WATER PUMP  
  5P-9461 FUEL SYSTEM  
  5P-9418 OIL COOLER AND LINES  
  5P-3187 TRANSMISSION  
 

#SEBP10761043
 

NAME PLATES AND TRANSFERS

NAME PLATES AND TRANSFERS
SEBP10761043 SEBP1076
  For full view, you need register

Parts for your 12G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  8D-5134 [1] PLATE LOCK PIN INDICATOR  
    ON L.H. BLADE LIFT PIN
  8D-5135 [1] PLATE LOCK PIN INDICATOR  
    ON R.H. BLADE LIFT PIN
  8H-8648 [1] PLATE DISCONNECT SWITCH  
    ON REAR OF SHIFT CONSOLE
  4M-4716 [1] PLATE SERIAL NUMBER (VEHICLE)  
    ON R.H. SIDE OF FRONT FRAME BEHIND BLADE LIFT BRACKET
  3N-3790 [1] PLATE SERIAL NUMBER (ENGINE)  
    ON REAR L.H. SIDE OF CYLINDER BLOCK
  5P-0215 [1] PLATE SERIAL NUMBER (MASTER)  
    IN VISIBLE POSITION IN OPERATOR COMPARTMENT
  5P-3999 [1] PLATE MAIN FRAME  
    BELOW SERIAL NUMBER PLATE ON R.H. SIDE OF FRONT FRAME
  4B-4158 [10] DRIVE SCREW  
  2H-4337 [4] DRIVE SCREW  
  5P-8267 [1] FILM LUBRICATION INSTRUCTIONS  
    ON SIDE OF BATTERY BOX
  1S-7988 [2] FILM DRAIN VALVE INSTRUCTIONS  
    ON EACH SIDE OF RADIATOR SUPPORT
  8S-3691 [1] FILM ELECTRIC STARTING INSTRUCTIONS  
    ON RIGHT REAR VERTICAL ROPS POST
  5P-0853 [1] TRANSFER GROUP  
  2P-0931 [2] FILM CAT  
    ON EACH SIDE OF PLATFORM
  5P-0854 [1] FILM 12G  
    ON PUSH PLATE CENTERED VERTICALLY WITH CORPORATE SYMBOL
  5P-1426 [2] FILM WARNING  
    ON EACH SIDE OF ENGINE DASH NEAR BOTTOM
  5P-1436 [1] FILM WARNING  
    ON EACH RADIATOR ACCESS DOOR
  5P-1816 [2] FILM 12G  
    ON EACH SIDE OF RADIATOR GUARD
  5P-4077 [1] FILM WARNING CENTERSHIFT LOCK  
    ON SHIFT CONSOLE INSTRUCTION PLATE
  5P-4114 [1] FILM WARNING CENTERSHIFT PIN  
    ON END OF CENTERSHIFT LOCK PIN HOUSING
  5P-4320 [1] FILM WARNING  
    ON REAR OF OPERATOR STEERING CONSOLE
  8S-3922 [1] FILM CORPORATE SYMBOL  
    ON FRONT OF PUSH PLATE
  8S-3923 [2] FILM CORPORATE SYMBOL  
    ON EACH SIDE OF RADIATOR GUARD
  8S-3942 [1] FILM CATERPILLAR  
    ON FRONT OF RADIATOR
  8S-8958 [2] FILM CATERPILLAR  
    ON EACH SIDE OF MAIN FRAME
 

Information:

Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/01
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/01
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Compact DPF Cleaner{0599, 0701, 0702, 108F}
Compact DPF Cleaner{0599, 0701, 0702, 108F}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000}
415-4055 Ultrasonic Wear Indicator IV Group{0787, 7000}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Bench Test Procedures
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Cat Service Tools Releases New Hose Cutting Machine {0678, 0684}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
New Pry Bars Have Striking Caps on Handles {0607}
2004/04/01
Twist Impact Sockets Grip Fasteners as Torque is Applied {0601}
2004/03/29
249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699}
2004/07/05
210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
2004/07/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Lockout Valves Shut Off Air Supply in the Service Shop {0699}
2005/04/25
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Shop Chemicals are now Listed in Cat Shop Supplies and Hand Tools {0599, 0644, 0645}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Disposable Dessicant Filter is Now Available {0618, 0646}
2006/02/13
New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}
2006/02/06
Slide Sledge Heavy Equipment Repair Tools Are Now Available {0599, 0644}
2006/04/17
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/01
Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
2006/10/02
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599}
2008/04/14
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A New Backing Pad Is Available for the 127 mm (5 inch) Rotary Grinding Disc {0674, 0677, 0685}
2009/10/19
Component Cleaners That Contain Trichloroethylene (TCE) Must Not Be Used On Electrical Connectors {0709}
2010/02/22
Changes to the Usage and Cleaning of the Contamination Monitor Group {0645, 0680, 1280, 1348, 3080, 429F, 5095}
2010/09/01
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Caterpillar Parts SIS Catalog 12G :

AIR INFLATION GROUP
2G-1616 AIR INFLATION GROUP
AIR INFLATION GROUP
2G-1616 AIR INFLATION GROUP
AIR INFLATION GROUP
9D-6440 AIR INFLATION GROUP
TACHOGRAPH DRIVE GROUP
2G-2950 TACHOGRAPH DRIVE GROUP
TACHOGRAPH DRIVE GROUP
8D-3250 TACHOGRAPH DRIVE GROUP
DRIVE GP-TACHOGRAPH
6G-5840 DRIVE GP-TACHOGRAPH
GUARD GP-VANDALISM
6G-8990 GUARD GP-VANDALISM
VANDALISM GUARD GROUP
2G-4350 VANDALISM GUARD GROUP
GREASE GUN AS
8F-9866 GREASE GUN AS
GASKET KITS
NAME PLATES AND TRANSFERS

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT