AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8D6980 CENTERSHIFT LINES GROUP--Single Circuit Serial No. 96U1098 to 96U1281 inclusive 8J5458 Valve parts are shown on Page 251 14G


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC

MOTOR GRADER 14G MOTOR GRADER 96U
 14G MOTOR GRADER 96U01098-04297 (MACHINE) POWERED BY 3306 ENGINE SEBP1077 14G 96U   (1973)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
8D-7650 LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC
8D-6980 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-6980 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-6980 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC-ART
8D-7020 LINES GP-HYDRAULIC-ART
 

#SEBP10770710
 

8D-6980: LINES GP-HYDRAULIC

8D6980 CENTERSHIFT LINES GROUP--Single Circuit
Serial No. 96U1098 to 96U1281 inclusive
8J5458 Valve parts are shown on Page 251
c155151 SEBP1077
8D6980 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5872 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-4055 [1] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM.  
  5P-0179 H HOSE 434 cm(170.9 in.)  
2. 8M-0505 [7] CONNECTOR  
3. 3K-0360 [12] SEAL  
4. 8J-8197 C [1] CLIP  
5. 9D-5930 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 287 cm(113.0 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM.  
  9S-9727 [1] COUPLING ASSEM.  
6. 5D-9797 [3] CLAMP  
7. 0T-0102 [3] BOLT  
8. 3B-4506 C [7] LOCKWASHER  
9. 9D-5873 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 82 cm(12.71 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [2] COUPLING ASSEM.  
10. 8J-5458 Y [1] CHECK VALVE  
    (Separate Illustration)
11. 030-7943 [2] ELBOW  
12. 0L-1143 [3] BOLT  
13. 1A-5822 [2] BOLT  
14. 8D-9499 [1] BLOCK  
15. 9D-5931 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 351 cm(138.2 in.)  
  8S-4055 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
16. 0S-0509 [1] BOLT  
17. 5D-2645 [1] CLAMP  
18. 7D-4092 C [1] CLIP  
19. 030-7948 [3] ELBOW  
20. 0S-1621 [1] BOLT  
  1D-4719 C [1] NUT  
21. 030-7963 [2] ELBOW  
22. 3K-9957 [2] CLAMP  
23. 7B-3235 [1] BOLT  
  0V-0531 [1] WASHER  
24. 3B-4508 C [4] LOCKWASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10770711
 

8D-6980: LINES GP-HYDRAULIC

8D6980 CENTERSHIFT LINES GROUP--Single Circuit
Serial No. 96U1282 to 96U1492 inclusive
8J5458 Valve parts are shown on Page 251
c159115 SEBP1077
8D6980 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5872 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-4055 [1] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM.  
  5P-0179 H HOSE 434 cm(170.9 in.)  
2. 8M-0505 [7] CONNECTOR  
3. 3K-0360 C [8] SEAL  
4. 8J-8197 [1] CLIP  
5. 2G-4115 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 397 cm(156.3 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM.  
  9S-9727 [1] COUPLING ASSEM.  
6. 2G-4193 C [3] CLAMP  
7. 0L-1351 C [3] BOLT  
8. 5P-1075 C [9] WASHER  
9. 2G-4126 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 463 cm (182.28 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [2] COUPLING ASSEM.  
10. 8J-5458 Y [1] CHECK VALVE  
    (Separate Illustration)
11. 2G-2623 C [1] PLATE  
12. 0L-1143 [3] BOLT  
13. 0S-1620 C [2] BOLT  
14. 2G-2625 C [1] PLATE  
15. 0L-1143 C [2] BOLT  
  1D-4717 C [2] NUT  
16. 0S-0509 [1] BOLT  
17. 5D-2645 [1] CLAMP  
18. 7D-4092 [1] CLIP  
19. 030-7948 C [1] ELBOW  
20. 0S-1621 [1] BOLT  
  1D-4719 [1] NUT  
21. 030-7963 [2] ELBOW  
22. 3K-9957 [2] CLAMP  
23. 7B-3235 [1] BOLT  
  0V-0531 [1] WASHER  
24. 3B-4508 [4] LOCKWASHER  
25. 2G-3937 C [1] CLAMP  
26. 2G-3938 C [1] CLAMP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10770712
 

8D-6980: LINES GP-HYDRAULIC

8D6980 CENTERSHIFT LINES GROUP--Single Circuit
Serial No. 96U1493-Up
8J5458 Valve parts are shown on Page 251
c225829 SEBP1077
8D6980 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5872 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-4055 [1] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM.  
  5P-0179 H HOSE 434 cm(170.9 in.)  
2. 8M-0505 [7] CONNECTOR  
3. 3K-0360 [8] SEAL  
4. 6D-4636 C [1] CLIP  
5. 2G-4115 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 397 cm(156.3 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM.  
  9S-9727 [1] COUPLING ASSEM.  
6. 2G-4193 [3] CLAMP  
7. 0L-1351 [3] BOLT  
8. 5P-1075 C [10] WASHER (conical)  
9. 2G-4126 [1] HOSE ASSEM. (not serv)  
    For service furnish:
9. 5P-0179 H HOSE 463 cm(182.28 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [2] COUPLING ASSEM.  
10. 8J-5458 Y [1] VALVE GROUP  
    (Separate Illustration)
11. 2G-2623 [1] PLATE  
12. 0L-1143 [3] BOLT  
13. 0S-1620 [2] BOLT  
14. 2G-2625 [1] PLATE  
15. 0L-1143 [2] BOLT  
    - OR -
  0T-0573 C [2] BOLT  
16. 0S-0509 [1] BOLT  
17. 5D-2645 [1] CLAMP  
18. 2S-2053 C [1] CLIP  
19. 030-7948 [1] ELBOW  
20. 0S-1594 C [1] BOLT  
21. 1D-4717 [2] ELBOW  
22. 3K-9957 [2] CLAMP  
23. 7B-3235 [1] BOLT  
  0V-0531 [1] WASHER  
24. 3B-4508 C [3] LOCKWASHER  
25. 2G-3937 [1] CLAMP  
26. 2G-3938 [1] CLAMP  
27. 1D-4717 C [3] NUT  
28. 7K-4743 C [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETER
 

#SEBP10770713
 

8D-7020: LINES GP-HYDRAULIC-ART

8D7020 ARTICULATION LINES GROUP--Single Circuit
8J5458 Valve parts are shown on Page 251
c162438 SEBP1077
8D7020 LINES GP-HYDRAULIC-ART Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-5861 [1] HOSE ASSEM. (not serv.)  
    For Service Furnish:
  5P-0178 H HOSE 100 cm(39.37 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5859 [1] HOSE ASSEM. (not serv.)  
    For Service Furnish:
  5P-0178 H HOSE 70 cm(27.56 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 C [6] WASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5858 [1] HOSE ASSEM. (not serv.)  
    For Service Furnish:
  5P-0178 H HOSE 27 cm(10.63 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 [7] ELBOW  
10. 9D-5856 [2] HOSE ASSEM. (not serv.)  
    For Service Of Each Furnish:
  5P-0178 H HOSE 53 cm(20.87 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 [4] ELBOW  
12. 8J-5458 Y [1] VALVE GROUP  
    (Separate Illustration)
  0L-1143 [3] BOLT  
13. 9D-5854 [1] HOSE ASSEM. (not serv.)  
    For Service Furnish:
  5P-0178 H HOSE 87 cm(34.26 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 C [2] BOLT  
16. 9D-5857 [1] HOSE ASSEM. (not serv.)  
    For Service Furnish:
  5P-0178 H HOSE 72 cm(28.35 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For Service Furnish:
  5P-0178 H HOSE 54 cm(21.26 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10770714
 

8D-6990: LINES GP-LIFT CYLINDER

8D6990 LIFT CYLINDER LINES GROUP
Serial No. 96U1098 to 96U2483 inclusive
8J5458 and 8J9303 Valve parts are shown on Pages 251 and 256
c158097 SEBP1077
8D6990 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2673 [4] CONNECTOR  
2. 3K-0360 [24] SEAL  
3. 9D-5932 [4] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  5P-0179 H HOSE 168 cm (66.14 in.)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
4. 9D-5933 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 108 cm(42.52 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  3S-8606 [2] SLEEVE  
5. 9S-4191 [4] PLUG  
  3J-1907 [4] SEAL  
6. 8D-5955 [4] BLOCK  
7. 2G-5495 C [4] CLAMP  
8. 0S-0509 [8] BOLT  
9. 5P-1075 C [14] WASHER  
10. 8M-0505 [8] CONNECTOR  
11. 8D-4859 [2] TUBE ASSEM.  
12. 030-7948 [12] ELBOW  
13. 9D-5939 [1] HOSE ASSEM.  
    (not serv - R.H. outer)
    For service furnish:
  5P-0179 H HOSE 115 cm(45.28 in.)  
  9S-9727 [2] COUPLING  
  3S-8606 [2] SLEEVE  
14. 8D-7113 [2] TUBE ASSEM.  
15. 0L-1143 [6] BOLT  
16. 8J-5458 Y [1] VALVE GROUP (R.H. -check)  
  8J-9303 Y [1] VALVE GROUP (L.H. -check)  
    (Separate Illustration)
17. 9D-5934 [1] HOSE ASSEM.  
    (not serv- L.H. outer)
    For service furnish:
  5P-0179 H HOSE 115 cm(45.28 in.)  
  9S-9727 [2] COUPLING  
  3S-8606 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10770715
 

8D-6990: LINES GP-LIFT CYLINDER

8D6990 LIFT CYLINDER LINES GROUP
Serial No. 96U2484 to 96U3137 inclusive
8J5458 and 8J9303 Valve parts are shown on Pages 251 & 256
c216674 SEBP1077
8D6990 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2673 [4] CONNECTOR  
2. 3K-0360 C [16] SEAL  
3. 9D-6055 C [4] HOSE ASSEM. (not serv)  
    (For Service of each Furnish:)
  5P-0179 H HOSE 172 cm(68.72 in.)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
4. C [2] HOSE ASSEM. (not serv)  
    (For Service of each Furnish:)
  5P-0179 H HOSE 178 cm(70.1 in.)  
  8S-4055 COUPLING ASSEM. (straight)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  3S-8606 [2] SLEEVE  
5. 0T-0065 C [2] BOLT  
  1D-4717 C [2] NUT  
  3H-3244 C [2] SPACER  
6. 6D-4244 C [4] CLIP  
7. 2G-5495 C [2] CLAMP  
8. 030-7943 C [2] ELBOW  
9. 5P-1075 C [8] WASHER  
10. 8M-0505 C [2] CONNECTOR  
11. 0L-1143 [6] BOLT  
12. 030-7948 C [8] ELBOW  
13. 6G-0058 C [2] HOSE ASSEM. (not serv)  
    (For Service of Each Furnish:)
  5P-0179 H HOSE 147 cm(57.88 in.)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
14. 8J-5458 [1] VALVE GROUP (R.H. -check)  
  8J-9303 Y [1] VALVE GROUP (L.H. -check)  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10770716
 

8D-6990: LINES GP-LIFT CYLINDER

8D6990 LIFT CYLINDER LINES GROUP
Serial No. 96U3138-Up
8J5458 and 8J9303 Valve parts are shown on Pages 251 and 256
c170899 SEBP1077
8D6990 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2673 [4] CONNECTOR  
2. 3K-0360 C [14] SEAL  
3. 9D-6055 [4] HOSE ASSEM. (not serv)  
    (For Service of each Furnish:)
  9S-0671 CH HOSE 68.72 in.(172 cm)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
4. [2] HOSE ASSEM. (not serv)  
    (For Service of each Furnish:)
  9S-0671 CH HOSE 70.1 in.(178 cm)  
  8S-4055 COUPLING ASSEM. (straight)  
  9S-9727 [1] COUPLING ASSEM (45 degrees)  
  3S-8606 [2] SLEEVE  
5. 2H-9889 C [2] CAPSCREW  
  1D-4717 [2] NUT  
  3H-3244 [2] SPACER  
6. 6D-4244 [4] CLIP  
7. 2G-5495 [2] CLAMP  
8. 030-7943 [2] ELBOW  
9. 5P-1075 C [6] WASHER  
10. 030-8189 C [2] CONNECTOR  
11. 0L-1143 [6] BOLT  
12. 030-7948 [8] ELBOW  
13. 6G-0058 [2] HOSE ASSEM. (not serv)  
    (For Service of Each Furnish:)
  9S-0671 CH HOSE 57.88 in.(147 cm)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
14. 8J-5458 [1] VALVE GROUP (R.H. check)  
  8J-9303 Y [1] VALVE GROUP (L.H. check)  
    (Separate Illustration)
15. 3D-2824 C [2] SEAL  
16. 4B-4278 C [4] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP10770717
 

8D-7060: LINES GP-HYDRAULIC

8D7060 BLADE TIP LINES GROUP
Serial No. 96U1098 to 96U1134 inclusive
8J5913 Valve parts are shown on Page 250
c160026 SEBP1077
8D7060 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 [14] CONNECTOR  
2. 3K-0360 [28] SEAL  
3. 9D-5869 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 193 cm(75.98 in.)  
4. 0S-1588 [4] BOLT  
5. 3B-4506 [14] LOCKWASHER  
6. 1D-4717 [6] NUT  
7. 9D-0878 [4] CLAMP (large)  
  1S-0994 [2] CLIP (small)  
8. 9D-5871 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  [2] SLEEVE  
  5P-0178 H HOSE 141 cm(55.51 in.)  
9. 4J-5468 C [4] CLAMP  
10. 0S-0509 [4] BOLT  
11. 005-4362 [6] ELBOW  
12. 9D-5863 C [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 574 cm(225.98 in.)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
13. 9D-0957 [1] BLOCK  
14. 0S-1594 [2] BOLT  
15. 9D-5868 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 46 cm (18.11 in.)  
16. 7D-9984 [8] ELBOW  
17. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
18. 0T-0573 [4] BOLT  
19. 9D-5867 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 36. cm (14.17 in.)  
20. 9D-5866 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 179 cm(70.86 in.)  
21. 9D-5864 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 85 cm(33.46 in.)  
22. 9S-4191 [2] PLUG  
  3J-1907 [2] SEAL  
23. 8D-0081 [1] BLOCK  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10770718
 

8D-7060: LINES GP-HYDRAULIC

8D7060 BLADE TIP LINES GROUP
Serial No. 96U1135 to 96U1281 inclusive
8J5913 Valve parts are shown on Page 250
c160027 SEBP1077
8D7060 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 C [12] CONNECTOR  
2. 3K-0360 C [24] SEAL  
3. 9D-5869 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 193 cm(75.98 in.)  
4. 0S-1588 [4] BOLT  
5. 3B-4506 C [13] LOCKWASHER  
6. 1D-4717 C [4] NUT  
7. 9D-0878 [4] CLAMP (large)  
8. 9D-5871 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  [2] SLEEVE  
  5P-0178 H HOSE 141 cm(55.51 in.)  
9. 4J-5468 C [4] CLAMP  
10. 0S-0509 [4] BOLT  
11. 005-4362 [6] ELBOW  
12. 9D-5863 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 574 cm(225.98 in.)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
13. 9D-0957 [1] BLOCK  
14. 0S-1594 [2] BOLT  
15. 9D-6048 C [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  5P-0178 H HOSE 97 cm(38.19 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
16. 7D-9984 C [6] ELBOW  
17. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
18. 1S-0994 C [4] CLIP (small)  
19. 0L-1143 C [3] BOLT  
20. 9D-5866 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  5P-0178 H HOSE 179 cm(70.86 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
21. 9D-5864 [2] HOSE ASSEM. (not serv)  
    (For service of each furnish)
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 85 cm(33.46 in.)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10770719
 

8D-7060: LINES GP-HYDRAULIC

8D7060 BLADE TIP LINES GROUP
Serial No. 96U1282 to 96U3137 inclusive
8J5913 Valve parts are shown on Page 250
c159114 SEBP1077
8D7060 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 C [8] CONNECTOR  
2. 3K-0360 C [20] SEAL  
3. 9D-5869 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 H HOSE 193 cm(75.98 in.)  
4. 0S-1588 [4] BOLT  
5. 5P-1075 C [13] WASHER  
6. 1D-4717 [4] NUT  
7. 9D-0878 [4] CLAMP (large)  
8. 9D-5871 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [2] COUPLING ASSEM. (straight)  
  [2] SLEEVE  
  5P-0178 H HOSE 141 cm(55.51 in.)  
9. 4J-5468 C [4] CLAMP  
10. 0S-0509 [4] BOLT  
11. 005-4362 [6] ELBOW  
12. 9D-5863 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 574 cm(225.98 in.)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
13. 9D-0957 [1] BLOCK  
14. 0S-1594 [2] BOLT  
15. 9D-6048 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 97 cm(38.19 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
16. 7D-9984 C [2] ELBOW  
17. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
18. 1S-0994 [4] CLIP (small)  
19. 0L-1143 [3] BOLT  
20. 2G-4127 C [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 305 cm(120.08 in.)  
  8S-4055 [2] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
21. 8M-0505 C [2] CONNECTOR  
22. 030-7943 C [2] ELBOW  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

Caterpillar Parts SIS Catalog 14G :

VALVE GP-RELIEF
9J-6447 VALVE GP-RELIEF
VALVE GP-UNLOADING
9J-1762 VALVE GP-UNLOADING
VALVE GP-COMBINATION
9J-3469 VALVE GP-COMBINATION
8D-7650 LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC
8D-6980 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-6980 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC-ART
8D-7020 LINES GP-HYDRAULIC-ART
LINES GP-LIFT CYLINDER
8D-6990 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
8D-6990 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
8D-6990 LINES GP-LIFT CYLINDER
LINES GP-HYDRAULIC
8D-7060 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-7060 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 14G
 
Caterpillar 14G
- motor graders
BOYD CAT COMPANY
Caterpillar 14G, motor graders, Construction
46,765 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
39,880 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
40,549 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
 
43,900 
Caterpillar 14G, motor graders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.