WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
OPERATOR STATION
ROPS/FOPS GPWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP10770850
4T-2233: EDGE -CUTTING
4T2233 CUTTING EDGE REPLACEMENT--Field Installation
FOR USE WITH 4.27m (14 Ft.) BLADE GROUP
FOR USE WITH 4.27m (14 Ft.) BLADE GROUP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4T-2233 | [2] | CUTTING EDGE CURVED 2.13 M (7 FT.) | ||
| 203.2 MM (8 IN.) WIDE & 25.4 MM (1 IN.) THICK | ||||
#SEBP10770851
4T-2234: EDGE-CUTTING
4T2234 CUTTING EDGE REPLACEMENT--Field Installation
FOR USE WITH 4.27m (14 Ft.) BLADE GROUP
FOR USE WITH 4.27m (14 Ft.) BLADE GROUP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4T-2234 | [2] | CUTTING EDGE STRAIGHT 2.13 M (7 FT.) | ||
| 203.2 MM (8 IN.) WIDE & 25.4 MM (1 IN.) THICK | ||||
#SEBP10770852
4T-2235: EDGE-CUTTING
4T2236 CUTTING EDGE REPLACEMENT--Field Installation
FOR USE WITH 4.88m (16 Ft.) BLADE GROUP
FOR USE WITH 4.88m (16 Ft.) BLADE GROUP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4T-2235 | [2] | CUTTING EDGE STRAIGHT 2.44 M (8 FT.) | ||
| 203.2 MM (8 IN.) WIDE & 25.4 MM (1 IN.) THICK | ||||
#SEBP10770853
4T-2236: EDGE-CUTTING
4T2236 CUTTING EDGE REPLACEMENT--Field Installation
FOR USE WITH 4.88m (16 Ft.) BLADE GROUP
FOR USE WITH 4.88m (16 Ft.) BLADE GROUP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4T-2236 | [2] | CUTTING EDGE CURVED 2.44 M (8 FT.) | ||
| 203.2 MM (8 IN.) WIDE & 25.4 MM (1 IN.) THICK | ||||
#SEBP10770854
9J-0908: RIPPER AR-3 SHANK
9J908 RIPPER ARRANGEMENT
Ripper Serial No. 39V1-Up. Part of 9J907 Ripper Arrangement listed on Page 304
8J1434 Tooth parts are shown on Page 306. Note: One or more 8J1434 Tooth Groups
may be added to convert to a 4 or 5 Tooth Ripper
Ripper Serial No. 39V1-Up. Part of 9J907 Ripper Arrangement listed on Page 304
8J1434 Tooth parts are shown on Page 306. Note: One or more 8J1434 Tooth Groups
may be added to convert to a 4 or 5 Tooth Ripper
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8J-6572 | [1] | CARRIAGE ASSEM. | |
| (Includes) | ||||
| 2. | 2K-4315 | [4] | BOSS | |
| 3. | 5K-8330 | [7] | HOLDER | |
| 4. | 2K-4309 | [1] | REINFORCEMENT (R.H.) | |
| 2K-4310 | [1] | REINFORCEMENT (L.H.) | ||
| 5. | 8M-3494 | [1] | PLATE (Serial No.) | |
| 4B-4158 | [2] | SCREW (dirve) | ||
| 6. | 7L-6363 | [2] | REFLEX MARKER | |
| 7. | 1L-6931 | [4] | SCREW ASSEM. | |
| 8. | 1D-4593 | [2] | BOLT | |
| 9. | 3K-2889 | [4] | NUT | |
| 10. | 8J-9608 | [2] | PIN | |
| 11. | 4K-3004 | [2] | BEARING | |
| 12. | 3B-8489 | [3] | FITTING | |
| 13. | 9S-1366 C | [8] | BOLT | |
| 1D-4719 | [8] | NUT | ||
| 14. | 3B-4508 | [10] | LOCKWASHER | |
| 15. | 9J-0269 | [2] | LINK ASSEM. | |
| (Each Includes) | ||||
| 16. | 3G-2582 C | [2] | BEARING | |
| 17. | 9D-6584 C | [8] | SEAL | |
| 18. | 1D-4599 | [2] | BOLT | |
| 19. | 3K-8510 C | [1] | PIN | |
| 20. | 2K-0703 | [1] | BAR | |
| 21. | 0S-1585 | [2] | BOLT | |
| 22. | 8J-9607 | [2] | PIN | |
| 23. | 9D-6585 C | [8] | SEAL | |
| 24. | 9J-0268 | [1] | LINK ASSEM. | |
| (Includes) | ||||
| 25. | 3G-2580 C | [4] | BEARING | |
| 26. | 8J-1434 Y | [3] | TOOTH GROUP | |
| (Separate Illustration) | ||||
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP10770855
8J-1434: TOOTH GP-SCARIFIER
8J1434 TOOTH GROUP
Part of 9J908 Ripper Arrangement shown on Page 305
Part of 9J908 Ripper Arrangement shown on Page 305
For full view, you need register
#SEBP10770856
8J-6628: MOUNTING GP-RIPPER
8J6628 RIPPER MOUNTING GROUP
Part of 9J907 Ripper Arrangement listed on Page 304
Part of 9J907 Ripper Arrangement listed on Page 304
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4709 | [6] | BOLT | |
| 2. | 9M-2828 | [12] | WASHER | |
| 3. | 8J-6622 | [1] | PLATE ASSEM. | |
| (Includes) | ||||
| 4. | 9H-7468 | [2] | PLATE | |
| 5. | 3K-2889 | [4] | LOCKNUT | |
| 6. | 8J-9608 | [2] | PIN | |
| 7. | 9S-1363 | [6] | BOLT | |
| 8. | 1D-4574 | [2] | BOLT | |
| 1K-6872 | [2] | LOCKNUT | ||
| 9. | 6K-0715 | [2] | PIN | |
| 10. | 8J-6627 | [2] | LINK ASSEM. | |
| 11. | 8J-9056 | [2] | SCREW | |
| 12. | 8J-9092 | [2] | PIN | |
| 13. | 1D-4595 | [2] | BOLT | |
| 14. | 0S-1588 C | [2] | BOLT | |
| 3B-4506 | [2] | LOCKWASHER | ||
| 15. | 9J-5347 C | [1] | BAR | |
| 16. | 1D-4593 | [2] | BOLT | |
| C | INDICATES CHANGE | |||
#SEBP10770857
9D-3040: ROLL-OVER PROTECTIVE SYSTEM
For full view, you need register
#SEBP10770858
2G-6220: ROLL-OVER PROTECTIVE SYSTEM
2G6220 ROLL-OVER PROTECTIVE SYSTEM--Open--
Replaced by 5T571 or 5T572 listed on Page 307B
AN ATTACHMENT
Replaced by 5T571 or 5T572 listed on Page 307B
AN ATTACHMENT
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2G-8245 Y | [1] | MIRROR GROUP | ||
| 9D-0570 Y | [1] | PANEL GROUP | ||
| 2G-5985 Y | [1] | CAB LINER GROUP | ||
| 2G-6005 Y | [1] | ROLL-OVER PROTECTIVE STRUCTURE GROUP | ||
| 2D-3406 | [1] | PLUG TO TRANSMISSION CONTROL GROUP | ||
| 3D-9871 | [1] | BUTTON TO SWITCH PANEL ON SHIFT CONSOLE | ||
| 3D-9872 | [1] | BUTTON TO SWITCH PANEL ON SHIFT CONSOLE | ||
| 7D-4786 | [1] | PLUG TO CONSOLE GROUP | ||
| 9D-5834 | [1] | FLOORMAT | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP10770859
5T-0564: CONVERSION AR-ROPS
5T564 ROPS CONVERSION ARRANGEMENT--Enclosed--Low Profile--
Field Installation
Field Installation
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6G-2200 Y | [1] | ROPS GROUP | ||
| 6G-2590 Y | [1] | CAB DOOR GROUP | ||
| 6G-2620 Y | [1] | CAB LINER SOUND SUPPRESSION | ||
| 6G-2580 Y | [1] | WINDSHIELD WIPER GROUP | ||
| 6G-2570 Y | [1] | WINDSHIELD WASHER GROUP | ||
| 6G-2560 Y | [1] | CAB PANEL GROUP | ||
| 2G-8245 Y | [1] | MIRROR GROUP REAR VIEW | ||
| 6G-5805 Y | [1] | CAB WIRING GROUP | ||
| 6G-6751 | [1] | FLOORMAT | ||
| 5T-0819 Y | [1] | HARNESS ASSEMBLY CAB RETROFIT | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
Special Instruction
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
