AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5S723 UNIVERSAL JOINT ASSEMBLY Part of 3S7095 Flywheel Clutch Group shown on Page 94 D5 TRACK-TYPE TRACTOR


POWER TRAIN
SHAFT GP
TRANSMISSION GP

TRACK-TYPE TRACTOR D5 TRACK-TYPE TRACTOR 93J
 D5 TRACTOR / DIRECT DRIVE / 93J00905-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1087 D5 93J   (1967)

POWER TRAIN

SHAFT GP
UNIVERSAL JOINT GP
5S-0723 UNIVERSAL JOINT GP
 

#SEBP10870180
 

5S-0723: UNIVERSAL JOINT GP

5S723 UNIVERSAL JOINT ASSEMBLY
Part of 3S7095 Flywheel Clutch Group shown on Page 94
c213836 SEBP1087
5S0723 UNIVERSAL JOINT GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3H-0122 [1] FITTING  
  3B-8486 C [1] FITTING  
  3S-0402 [1] SHAFT  
  1B-4203 [8] NUT  
  1S-9670 [1] SPIDER AND BEARING ASSEM  
  5H-2490 [8] BOLT  
  1S-9670 [1] SPIDER AND BEARING ASSEM  
  C   INDICATES CHANGE
 

#SEBP10870181
 

8S-4519: TRANSMISSION ARRANGEMENT

8S4519 TRANSMISSION ARRANGEMENT
Note: This Arrangement provides the following speeds: (forward
First--2.3, Second--2.7, Third--3.3, Fourth--3.7, Fifth--4.2 and
Sixth--5.1 M.P.H. (Reverse) First--3.0, Second--3.5, Third--4.2, and
Fourth--4.9 M.P.H. AN ATTACHMENT
SEBP10870181 SEBP1087
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5S-4018 Y [1] TRANSMISSION AND FLYWHEEL CLUTCH CONTROL GROUP  
  8S-2154 Y [1] TRANSMISSION GROUP  
  3P-9736 [1] PANEL INLAY--L.H.  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10870182
 

3S-7094: TRANSMISSION GP

3S7094 TRANSMISSION GROUP--Part 1 of 2
Serial No. 93J905 to 93J1007 inclusive and 94J2449 to 94J2694 inclusive. Note: This
Transmission provides the following speeds: (Forward) First--1.7, Second--2.6, Third--3.6,
Fourth--5.0, and Fifth--6.9 M.P.H. (Reverse) First--2.1, Second--3.3, Third--4.6 and
Fourth--6.3 M.P.H.
c209036 SEBP1087
3S7094 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-3028 [2] SCREW  
2. 5S-0729 [1] PLATE  
3. 5M-6214 [1] PLUG  
4. 6F-7030 [2] BOLT  
  9M-1367 [1] LOCK  
5. 5M-7339 [1] WASHER  
  2H-3927 [1] SEAL  
6. 5M-7342 [1] FLANGE  
7. 3S-7156 [1] COVER  
8. 2H-3928 [2] SEAL  
9. 0S-1591 [11] BOLT  
10. 3B-4506 C [20] LOCKWASHER  
11. 7B-5670 [1] BEARING  
12. 1D-4717 C [4] NUT  
13. 0L-1026 [2] PLUG  
14. 3S-7886 [1] PIN  
15. 8S-2140 [1] TRUNNION  
  1H-8720 [1] SEAL  
16. 7F-2072 [1] PIN  
17. 3S-7148 [1] COVER  
18. 0S-1571 C [5] BOLT  
19. 2H-3932 [1] SEAL  
20. 9S-2497 C [1] COVER  
  5H-8624 [1] SEAL  
21. 8S-2155 [1] CASE ASSEM.  
    (Includes)
22. 1F-2825 [1] BUSHING  
23. 2D-8806 C [11] STUD 4.83 cm(1.90 in.) long  
24. 3D-2871 [4] STUD  
25. 3D-6627 [3] STUD 7.62 cm(3 in.) long  
26. 5M-1932 [1] STUD 5.59 cm(2.20 in.) long  
27. 2D-8155 [1] STUD 9.14 cm(3.60 in.) long  
28. 0L-2061 [1] DOWEL  
29. 2D-8806 C [1] STUD 4.83 cm(1.90 in.) long  
    -or-
  5M-1932 [1] STUD 5.59 cm(2.20 in.) long  
30. 8S-4495 [1] TUBE ASSEM.  
31. 0S-0509 [1] BOLT  
  0L-0364 [1] LOCK  
32. 9S-4205 [1] PLUG  
  7M-8485 [1] SEAL  
33. 1D-4720 [12] NUT  
  3B-4510 [12] LOCKWASHER  
  5S-0729 H [1] PLATE  
  4B-4159 H [2] SCREW  
    (mounted on bevel gear case)
  C   INDICATES CHANGE
  H   NOT SHOWN
 

#SEBP10870183
 

3S-7094: TRANSMISSION GP

3S7094 TRANSMISSION GROUP--Part 2 of 2
Serial No. 93J905 to 93J1007 inclusive and 94J2449 to 94J2694 inclusive
c209037 SEBP1087
3S7094 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1593 [4] BOLT  
  5F-9669 [2] LOCK  
2. 2F-7826 [1] WASHER  
3. 7S-6103 [1] GEAR ASSEM. (24 teeth)  
4. 5M-7335 [1] BEARING ASSEM.  
5. 3S-7885 [1] GASKET  
6. 3S-7144 [1] CAGE  
7. 5P-4258 C [1] SEAL  
8. 5M-7366 [2] BEARING ASSEM.  
9. 9S-3582 C [2] CONE  
10. 4F-3190 C [1] WASHER  
11. 6F-7030 [4] BOLT  
  0T-0329 [2] LOCK  
12. 7M-1154 [1] RACE AND ROLLER ASSEM.  
13. 9S-3581 C [2] CUP  
14. 2K-1722 C [1] WASHER  
15. 9S-2505 C [1] CAGE  
  2B-8924 [1] GASKET  
16. 9B-0533 [1] WASHER  
17. 3S-7155 [1] CAGE  
18. 3S-7146 [1] SHIM  
19. 4M-0189 [1] SEAL  
20. 3S-7160 [1] SPACER  
21. 3S-7153 [1] GEAR (36 teeth)  
22. 3S-7161 [2] SPACER  
23. 3S-7150 [1] GEAR (25 teeth)  
24. 3S-7154 [1] GEAR (32 and 27 teeth)  
25. 3S-7145 [2] GEAR (29 teeth)  
26. 7S-2762 [1] GEAR (33 teeth)  
27. 5S-8767 [1] GEAR (39 teeth)  
28. 6B-4878 [1] DOWEL  
29. 0L-1026 [1] PLUG  
30. 2M-3818 [1] SEAL  
31. 4M-7432 [1] RING  
32. 3K-3192 [1] RACE  
33. 3K-3193 [1] RACE AND ROLLER ASSEM.  
34. 3S-7143 [1] PINION (11 teeth)  
35. 2D-6420 [1] RACE  
36. 9S-2507 C [1] SHAFT  
37. 7M-0820 [1] GEAR (17 and 22 teeth)  
38. 1J-6470 [1] RING  
39. 6B-0133 [1] RACE  
40. 6B-0132 [1] RACE AND ROLLER ASSEM.  
41. 3S-7157 [1] GEAR (27 teeth)  
42. 3S-7147 [1] SHAFT  
43. 4S-6190 [1] PINION (19 teeth)  
44. 4H-6195 [1] RING  
45. 4S-6189 [1] PINION  
  C   INDICATES CHANGE
 

#SEBP10870184
 

3S-7094: TRANSMISSION GP

3S7094 TRANSMISSION GROUP--Part 1 of 2
Serial No. 93J1008-Up and 94J2695-Up. Note: This Transmission provides the
following speeds: (Forward) First--1.7, Second--2.6, Third--3.6, Fourth--5.0,
and Fifth--6.9 M.P.H. (Reverse) First--2.1, Second--3.3, Third--4.6 and
Fourth--6.3 M.P.H.
c164183 SEBP1087
3S7094 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-3028 [2] SCREW  
2. 5S-0729 [1] PLATE  
3. 5M-6214 [1] PLUG  
4. 6F-7030 [2] BOLT  
  9M-1367 [1] LOCK  
5. 5M-7339 [1] WASHER  
  2H-3927 [1] SEAL  
6. 5M-7342 [1] FLANGE  
7. 3S-7156 [1] COVER  
8. 2H-3928 [2] SEAL  
9. 0S-1591 [11] BOLT  
10. 3B-4506 [20] LOCKWASHER  
11. 7B-5670 [1] BEARING  
12. 1D-4717 [4] NUT  
13. 0L-1026 [2] PLUG  
14. 3S-7886 [1] PIN  
15. 8S-2140 [1] TRUNNION  
  1H-8720 [1] SEAL  
16. 7F-2072 [1] PIN  
17. 3S-7148 [1] COVER  
18. 0S-1571 [5] BOLT  
19. 2H-3932 [1] SEAL  
20. 9S-2497 [1] COVER  
  5H-8624 [1] SEAL  
21. 8S-2155 [1] CASE ASSEM.  
    (Includes)
22. 1F-2825 [1] BUSHING  
23. 2D-8806 [11] STUD 4.83 cm(1.90 in.) long  
24. 3D-2871 [4] STUD  
25. 3D-6627 [3] STUD 7.62 cm(3 in.) long  
26. 5M-1932 [1] STUD 5.59 cm(2.20 in.) long  
27. 2D-8155 [1] STUD 9.14 cm(3.60 in.) long  
28. 0L-2061 [1] DOWEL  
29. 2D-8806 [1] STUD 4.83 cm(1.90 in.) long  
    -or-
  5M-1932 [1] STUD 5.59 cm(2.20 in.) long  
30. 8S-4495 [1] TUBE ASSEM.  
31. 0S-0509 [1] BOLT  
  0L-0364 [1] LOCK  
32. 9S-4205 [1] PLUG  
  7M-8485 [1] SEAL  
33. 1D-4720 [12] NUT  
  3B-4510 [12] LOCKWASHER  
  5S-0729 F [1] PLATE  
  4B-4159 [2] SCREW  
    (mounted on bevel gear case)
  F   NOT SHOWN
 

#SEBP10870185
 

3S-7094: TRANSMISSION GP

3S7094 TRANSMISSION GROUP--Part 2 of 2
Serial No. 93J1008-Up and 94J2695-Up
c164184 SEBP1087
3S7094 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1593 [4] BOLT  
  5F-9669 [2] LOCK  
2. 2F-7826 [1] WASHER  
3. 7S-6103 [1] GEAR ASSEM. (24 teeth)  
4. 5M-7335 [1] BEARING ASSEM.  
5. 3S-7885 [1] GASKET  
6. 3S-7144 [1] CAGE  
7. 5P-4258 [1] SEAL  
8. 5M-7366 [2] BEARING ASSEM.  
9. 9S-3582 [2] CONE  
10. 4F-3190 [1] WASHER  
11. 6F-7030 [4] BOLT  
  0T-0329 [2] LOCK  
12. 7M-1154 [1] RACE AND ROLLER ASSEM.  
13. 9S-3581 [2] CUP  
14. 2K-1722 [1] WASHER  
15. 9S-2505 [1] CAGE  
  2B-8924 [1] GASKET  
16. 9B-0533 [1] WASHER  
17. 3S-7155 [1] CAGE  
18. 3S-7146 [1] SHIM  
19. 4M-0189 [1] SEAL  
20. 3S-7160 [1] SPACER  
21. 3S-7153 [1] GEAR (36 teeth)  
22. 3S-7161 [2] SPACER  
23. 3S-7150 [1] GEAR (25 teeth)  
24. 3S-7154 [1] GEAR (32 and 27 teeth)  
25. 3S-7145 [2] GEAR (29 teeth)  
26. 7S-2762 [1] GEAR (33 teeth)  
27. 5S-8767 [1] GEAR (39 teeth)  
28. 6B-4878 [1] DOWEL  
29. 0L-1026 [1] PLUG  
30. 2M-3818 [1] SEAL  
31. 4M-7432 [1] RING  
32. 5P-7178 C [1] RACE  
33. 5P-3753 C [1] RACE AND ROLLER ASSEM.  
34. 3S-7143 [1] PINION (11 teeth)  
35. 2D-6420 [1] RACE  
36. 9S-2507 [1] SHAFT  
37. 7M-0820 [1] GEAR (17 and 22 teeth)  
38. 1J-6470 [1] RING  
39. 6B-0133 [1] RACE  
40. 6B-0132 [1] RACE AND ROLLER ASSEM.  
41. 3S-7157 [1] GEAR (27 teeth)  
42. 3S-7147 [1] SHAFT  
43. 4S-6190 [1] PINION (19 teeth)  
44. 4H-6195 [1] RING  
45. 4S-6189 [1] PINION  
  C   INDICATES CHANGE
 

#SEBP10870186
 

8S-2154: TRANSMISSION GP

8S2154 TRANSMISSION GROUP--Part 1 of 2--Type 1
Part of 8S4519 Transmission Arrangement listed on Page 97
AN ATTACHMENT
c209727 SEBP1087
8S2154 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-3028 [2] SCREW  
2. 5M-2477 [1] PLATE  
3. 5M-6214 [1] PLUG  
4. 6F-7030 [2] BOLT  
  9M-1367 [1] LOCK  
5. 5M-7339 [1] WASHER  
6. 2H-3927 [1] SEAL  
7. 5M-7342 [1] FLANGE  
8. 3S-7156 [1] COVER  
9. 2H-3928 [2] SEAL  
10. 0S-1591 [11] BOLT  
11. 3B-4506 [20] LOCKWASHER  
12. 1D-4717 [1] NUT 5.57 mm(.219 in.) thick  
  3B-4506 [1] LOCKWASHER  
13. 7B-5670 [1] BEARING  
14. 1D-4717 [4] NUT 8.34 mm(.328 in.) thick  
15. 0L-1026 [2] PLUG  
16. 3S-7886 [1] PIN  
17. 8S-2140 [1] TRUNNION  
18. 1H-8720 [1] SEAL  
19. 7F-2072 [1] PIN  
20. 3S-7148 [1] COVER  
21. 0S-1571 [5] BOLT  
22. 2H-3932 [1] SEAL  
23. 9S-2497 [1] COVER  
  5H-8624 [1] SEAL  
24. 8S-2155 [1] CASE ASSEM.  
25. 1F-2825 [1] BUSHING  
26. 2D-8806 C [11] STUD 48.26 mm(1.90 in.) long  
27. 3D-2871 [4] STUD  
28. 3D-6627 [4] STUD 76.20 mm(3 in.) long  
29. 5M-1932 C [3] STUD  
30. 0L-2061 [1] DOWEL  
31. 1D-4720 [12] NUT  
  3B-4510 C [12] LOCKWASHER  
32. 8S-4495 [1] TUBE ASSEM.  
33. 0S-0509 [1] BOLT  
  0L-0364 [1] LOCK  
34. 4S-5858 [1] PLUG ASSEM.  
  9S-4205 [1] PLUG  
  7M-8485 [1] SEAL  
  5M-2477 [1] PLATE (Number)  
  4B-4159 [2] SCREW  
    (Not Shown - Mounted on Bevel Gear Case)
  C   INDICATES CHANGE
 

#SEBP10870187
 

8S-2154: TRANSMISSION GP

8S2154 TRANSMISSION GROUP--Part 2 of 2--Type 1
Part of 8S4519 Transmission Arrangement listed on Page 97
AN ATTACHMENT
c209726 SEBP1087
8S2154 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1593 [4] BOLT  
  5F-9669 [2] LOCK  
2. 2F-7826 [1] WASHER  
3. 7S-6103 [1] GEAR ASSEM. (24 Teeth)  
4. 5M-7335 [1] BEARING ASSEM.  
5. 3S-7885 [1] GASKET  
6. 3S-7144 [1] CAGE  
7. 5P-4258 C [1] SEAL  
8. 5M-7366 [2] BEARING ASSEM.  
9. 9S-3581 C [2] CUP  
10. 4F-3190 C [1] WASHER  
11. 6F-7030 [4] BOLT  
  0T-0329 [2] LOCK  
12. 7M-1154 C [1] RACE AND ROLLER ASSEM.  
13. 9S-3582 C [2] CONE  
14. 2K-1722 C [1] WASHER  
15. 9S-2505 C [1] CAGE  
  2B-8924 [1] GASKET  
16. 9B-0533 [1] WASHER  
17. 3S-7155 [1] CAGE  
18. 3S-7146 [1] SHIM  
19. 4M-0189 [1] SEAL  
20. 3S-7160 [1] SPACER  
21. 8S-2134 [1] GEAR (33 Teeth)  
22. 3S-7161 [2] SPACER  
23. 8S-2131 [1] GEAR (30 Teeth)  
24. 8S-2133 [1] GEAR (25 and 24 Teeth)  
25. 8S-2130 [1] GEAR (33 Teeth)  
26. 8S-2129 [1] GEAR (35 Teeth)  
27. 6B-4878 [1] DOWEL  
28. 0L-1026 [1] PLUG  
29. 2M-3818 [1] SEAL  
30. 4M-7432 [1] RING  
31. 3K-3192 [1] RACE  
32. 3K-3193 [1] RACE AND ROLLER ASSEM.  
33. 3S-7143 [1] PINION (11 Teeth)  
34. 2D-6420 [1] RACE  
35. 9S-2507 C [1] SHAFT  
36. 8S-2132 [1] GEAR (19 and 21 Teeth)  
37. 1J-6470 [1] RING  
38. 6B-0133 [1] RACE  
39. 6B-0132 [1] RACE AND ROLLER ASSEM.  
40. 8S-2137 [1] GEAR ASSEM. (20 and 23 Teeth)  
41. 3S-7147 [1] SHAFT  
42. 8S-2139 [1] PINION (20 Teeth)  
43. 4H-6195 [1] RING  
44. 8S-2138 [1] PINION (26 Teeth)  
45. 3S-0400 [2] SPACER  
46. 8S-2128 [1] GEAR (37 Teeth)  
  C   INDICATES CHANGE
 

#SEBP10870188
 

8S-2154: TRANSMISSION GP

8S2154 TRANSMISSION GROUP--Part 1 of 2--Type 2
Part of 8S4519 Transmission Arrangement listed on Page 97
AN ATTACHMENT
c213840 SEBP1087
8S2154 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-3028 [2] SCREW  
2. 5M-2477 [1] PLATE  
3. 5M-6214 [1] PLUG  
4. 6F-7030 [2] BOLT  
  9M-1367 [1] LOCK  
5. 5M-7339 [1] WASHER  
6. 2H-3927 [1] SEAL  
7. 5M-7342 [1] FLANGE  
8. 3S-7156 [1] COVER  
9. 2H-3928 [2] SEAL  
10. 0S-1591 [11] BOLT  
11. 3B-4506 [20] LOCKWASHER  
12. 1D-4717 [1] NUT 5.57 mm(.219 in.) thick  
  3B-4506 [1] LOCKWASHER  
13. 7B-5670 [1] BEARING  
14. 1D-4717 [4] NUT 8.34 mm(.328 in.) thick  
15. 0L-1026 [2] PLUG  
16. 3S-7886 [1] PIN  
17. 8S-2140 [1] TRUNNION  
18. 1H-8720 [1] SEAL  
19. 7F-2072 [1] PIN  
20. 3S-7148 [1] COVER  
21. 0S-1571 [5] BOLT  
22. 2H-3932 [1] SEAL  
23. 9S-2497 [1] COVER  
  5H-8624 [1] SEAL  
24. 8S-2155 [1] CASE ASSEM.  
25. 1F-2825 [1] BUSHING  
26. 2D-8806 [11] STUD 48.26 mm(1.90 in.) long  
27. 3D-2871 [4] STUD  
28. 3D-6627 [4] STUD 76.20 mm(3 in.) long  
29. 5M-1932 [3] STUD  
30. 0L-2061 [1] DOWEL  
31. 1D-4720 [12] NUT  
  3B-4510 [12] LOCKWASHER  
32. 8S-4495 [1] TUBE ASSEM.  
33. 0S-0509 [1] BOLT  
  0L-0364 [1] LOCK  
34. 4S-5858 [1] PLUG ASSEM.  
  9S-4205 [1] PLUG  
  7M-8485 [1] SEAL  
  5M-2477 F [1] PLATE (Number)  
  4B-4159 F [2] SCREW  
    (Not Shown - Mounted on Bevel Gear Case)
  F   NOT SHOWN
 

#SEBP10870189
 

8S-2154: TRANSMISSION GP

8S2154 TRANSMISSION GROUP--Part 2 of 2--Type 2
Part of 8S4519 Transmission Arrangement listed on Page 97
AN ATTACHMENT
c213839 SEBP1087
8S2154 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1593 [4] BOLT  
  5F-9669 [2] LOCK  
2. 2F-7826 [1] WASHER  
3. 7S-6103 [1] GEAR ASSEM. (24 Teeth)  
4. 5M-7335 [1] BEARING ASSEM.  
5. 3S-7885 [1] GASKET  
6. 3S-7144 [1] CAGE  
7. 5P-4258 [1] SEAL  
8. 5M-7366 [2] BEARING ASSEM.  
9. 9S-3581 [2] CUP  
10. 4F-3190 [1] WASHER  
11. 6F-7030 [4] BOLT  
  0T-0329 [2] LOCK  
12. 7M-1154 [1] RACE AND ROLLER ASSEM.  
13. 9S-3582 [2] CONE  
14. 2K-1722 [1] WASHER  
15. 9S-2505 [1] CAGE  
  2B-8924 [1] GASKET  
16. 9B-0533 [1] WASHER  
17. 3S-7155 [1] CAGE  
18. 3S-7146 [1] SHIM  
19. 4M-0189 [1] SEAL  
20. 3S-7160 [1] SPACER  
21. 8S-2134 [1] GEAR (33 Teeth)  
22. 3S-7161 [2] SPACER  
23. 8S-2131 [1] GEAR (30 Teeth)  
24. 8S-2133 [1] GEAR (25 and 24 Teeth)  
25. 8S-2130 [1] GEAR (33 Teeth)  
26. 8S-2129 [1] GEAR (35 Teeth)  
27. 6B-4878 [1] DOWEL  
28. 0L-1026 [1] PLUG  
29. 2M-3818 [1] SEAL  
30. 4M-7432 [1] RING  
31. 5P-7178 C [1] RACE  
32. 5P-3753 C [1] RACE AND ROLLER ASSEM.  
33. 3S-7143 [1] PINION (11 Teeth)  
34. 2D-6420 [1] RACE  
35. 9S-2507 [1] SHAFT  
36. 8S-2132 [1] GEAR (19 and 21 Teeth)  
37. 1J-6470 [1] RING  
38. 6B-0133 [1] RACE  
39. 6B-0132 [1] RACE AND ROLLER ASSEM.  
40. 8S-2137 [1] GEAR ASSEM. (20 and 23 Teeth)  
41. 3S-7147 [1] SHAFT  
42. 8S-2139 [1] PINION (20 Teeth)  
43. 4H-6195 [1] RING  
44. 8S-2138 [1] PINION (26 Teeth)  
45. 3S-0400 [2] SPACER  
46. 8S-2128 [1] GEAR (37 Teeth)  
  C   INDICATES CHANGE
 

Information:

Caterpillar Parts SIS Catalog D5 :

3S-7095 CLUTCH GP-FLYWHEEL
3S-7095 CLUTCH GP-FLYWHEEL
CLUTCH GP-FLYWHEEL
3S-7095 CLUTCH GP-FLYWHEEL
5S-4018 TRANSMISSION AND FLYWHEEL CLUTCH CONTROL GROUP
TRANSMISSION AND FLYWHEEL CLUTCH CONTROL GROUP
5S-4018 TRANSMISSION AND FLYWHEEL CLUTCH CONTROL GROUP
3S-7093 TRANSMISSION AND FLYWHEEL CLUTCH CONTROL GROUP
TRANSMISSION AND FLYWHEEL CLUTCH CONTROL GROUP
3S-7093 TRANSMISSION AND FLYWHEEL CLUTCH CONTROL GROUP
LAMP GP
1M-1882 LAMP GP
8S-4519 TRANSMISSION ARRANGEMENT
TRANSMISSION GP
3S-7094 TRANSMISSION GP
3S-7094 TRANSMISSION GP
TRANSMISSION GP
3S-7094 TRANSMISSION GP
3S-7094 TRANSMISSION GP
TRANSMISSION GP
8S-2154 TRANSMISSION GP
8S-2154 TRANSMISSION GP
TRANSMISSION GP
8S-2154 TRANSMISSION GP

Truck sale:

1980 CAT D550B
USD $19,800 
1980 CAT D550B

DON'S TRUCK & TRAILER SALES
Henryville, Indiana
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.