AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2G3440 CENTERSHIFT LINES GROUP--Single Circuit Serial No. 72V975-Up and 81V428-Up 8J9974 Valve parts are shown on Page 291 140G


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
LINES GP-CYLINDER
LINES GP-HYDRAULIC
LINES GP-SIDESHIFT
LINES GP-HYDRAULIC
LINES GP-SIDESHIFT
LINES GP-HYDRAULIC

MOTOR GRADER 140G MOTOR GRADER 72V
 140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENGINE SEBP1092 140G 72V   (1974)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
LINES GP-CIRCLE DRIVE MOTOR
2G-3460 LINES GP-CIRCLE DRIVE MOTOR
CENTERSHIFT LINES GROUP
8D-9530 CENTERSHIFT LINES GROUP
LINES GP-HYDRAULIC
2G-3440 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
BLADE TIP LINES GROUP
8D-8580 BLADE TIP LINES GROUP
LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
 

#SEBP10920700
 

2G-3440: LINES GP-HYDRAULIC

2G3440 CENTERSHIFT LINES GROUP--Single Circuit
Serial No. 72V975-Up and 81V428-Up
8J9974 Valve parts are shown on Page 291
c227774 SEBP1092
2G3440 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5960 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  2P-5943 CH HOSE 153.54 in. (390 cm)  
2. 030-8188 C [5] CONNECTOR  
3. 3K-0360 [8] SEAL  
4. 4J-5468 [1] CLAMP  
5. 2G-2553 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 139.76 in. (355 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
6. 5D-4988 [2] CLAMP  
7. 0L-1351 [4] BOLT  
8. 5P-1075 [10] WASHER (conical)  
9. 2G-2563 [1] CLAMP (upper)  
  2G-2562 [1] CLAMP (lower)  
  2G-2623 [1] PLATE  
10. 7D-9984 C [2] ELBOW  
    - OR -
  030-7962 [2] ELBOW (swivel)  
  030-8188 [2] CONNECTOR  
11. 8J-9974 CY [1] CHECK VALVE  
    (Separate Illustration)
12. 0L-1143 C [3] BOLT  
13. 0S-1594 [1] BOLT  
14. 2G-2625 [1] PLATE  
15. 2G-2559 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 C HOSE 168.5 in. (428 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
16. 0S-1620 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
17. 1S-0994 [2] CLIP  
18. 4H-9454 [2] CLAMP  
19. 005-4362 [1] ELBOW  
20. 1D-4717 [3] NUT  
21. 0L-1143 [2] BOLT 6.35 cm(2.5 in.) long  
    -(or)-
  0T-0573 C [2] BOLT 6.99 cm(2.75 in.) long  
  7K-4743 C [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP10920701
 

8D-8590: LINES GP-HYDRAULIC

8D8590 ARTICULATION LINES GROUP--Single Circuit
8J9974 Valve parts are shown on Page 291
c158102 SEBP1092
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 C [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-6048 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 97 cm(38.19 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5975 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 57 cm(22.4 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 C [6] WASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5974 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 32 cm(12.6 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 C [7] ELBOW  
10. 9D-5971 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 40 cm(15.8 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 [4] ELBOW  
12. 8J-9974 Y [1] VALVE GROUP (check)  
    (Separate Illustration)
13. 9D-5972 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 67 cm(26.4 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 [5] BOLT  
16. 9D-5973 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 79 cm(30.1 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 54cm(21.26 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10920702
 

8D-2820: LINES GP-LIFT CYLINDER

8D2820 LIFT CYLINDER LINES GROUP
Serial No. 72V823 to 72V2402 inclusive and 81V328 to 81V635 inclusive
8J9974 and 8J9975 Valve parts are shown on Pages 291 and 312
c209637 SEBP1092
8D2820 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9088 [4] CONNECTOR  
2. 3K-0360 [24] SEAL  
3. 9D-5984 [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE (154 cm (60.63 in.)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  5P-2467 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
4. 005-4362 [12] ELBOW  
5. 9D-5985 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 90 cm(35.43 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (str(45.0)  
  4S-5414 [2] SLEEVE  
6. 8D-9322 [2] CLAMP  
    -OR-
  2G-5494 C [4] CLAMP  
7. 0S-0509 [8] BOLT  
  4B-4278 [8] WASHER  
8. 3B-4506 [14] LOCKWASHER  
9. 8M-0505 [8] CONNECTOR  
10. 8D-8968 [4] TUBE ASSEM.  
11. 8D-5955 [4] JUNCTION BLOCK  
12. 9S-4191 [4] PLUG  
  3J-1907 [4] SEAL  
13. 9D-5987 [1] HOSE ASSEM. (R.H.-not serv)  
    For service furnish:
  5P-0178 H HOSE 90 cm(35.43 in.)  
  1P-9919 [2] COUPLING ASSEM. (45 degrees)  
  4S-5414 [2] SLEEVE  
  9D-5986 [1] HOSE ASSEM. (L.H.-not serv)  
    For service furnish:
  5P-0178 H HOSE 90 cm(35.43 in.)  
  1P-9919 [2] COUPLING ASSEM. (45 degrees)  
  4S-5414 [2] SLEEVE  
14. 0L-1143 [6] BOLT  
15. 8J-9974 Y [1] VALVE GROUP (R.H.-check)  
  8J-9975 Y [1] VALVE GROUP (L.H.-check)  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10920703
 

8D-2820: LINES GP-LIFT CYLINDER

8D2820 LIFT CYLINDER LINES GROUP
Serial No. 72V2403-Up and 81V636-Up
8J9974 and 8J9975 Valve parts are shown on Pages 291 and 312
c227777 SEBP1092
8D2820 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9088 [4] CONNECTOR  
2. 3K-0360 C [16] SEAL  
3. 9D-5984 [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 154 cm(60.63 in.)  
  1P-9919 [1] COUPLING ASSEM. (45degrees)  
  5P-2467 [1] COUPLING ASSEM. (90degrees)  
  4S-5414 [2] SLEEVE  
4. 005-4362 C [8] ELBOW  
5. 2G-9989 C [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 129 cm(50.80 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45degrees)  
  4S-5414 [2] SLEEVE  
6. 2G-5494 C [2] CLAMP  
7. 2H-9889 C [2] CAPSCREW  
8. 1D-4717 C [2] NUT  
9. 7D-9984 C [2] ELBOW  
10. 0L-1143 [6] BOLT  
11. 8J-9974 Y [1] VALVE GROUP (R.H. CHECK)  
  8J-9975 Y [1] VALVE GROUP (L.H. CHECK)  
    (Separate Illustration)
12. 5P-1075 C [6] WASHER  
13. 030-8188 C [2] CONNECTOR  
14. 3H-3244 C [2] SPACER  
15. 1S-0994 C [4] CLIP  
16. 4B-4278 C [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETER
 

#SEBP10920704
 

8D-8580: BLADE TIP LINES GROUP

8D8580 BLADE TIP LINES GROUP--Single Circuit
Replaced by 2G3430 shown on Page 297
Part of 9D6985, 9D6995, 9D6410 & 9D6415 Arrangements listed on Pages 359, 361 & 386
8J5913 Valve parts are shown on Page 306. AN ATTACHMENT
c159025 SEBP1092
8D8580 BLADE TIP LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 C [8] ELBOW  
2. 3K-0360 [20] SEAL  
3. 9D-5977 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 535 cm(210.63 in.)  
  8S-6392 [1] COUPLING ASSEM.  
4. 8D-0081 [1] BLOCK  
5. 0T-0573 [2] BOLT  
6. 3B-4506 [5] LOCKWASHER  
7. 9S-4191 [2] PLUG  
  3J-1907 [2] SEAL  
8. 7D-9984 [6] ELBOW  
9. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 85 cm(33.46 in.)  
10. 030-8188 C [6] CONNECTOR  
11. 9D-5980 [2] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 148 cm(58.27 in.)  
12. 9D-5978 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [1] COUPLING ASSEM.  
  8S-6393 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 60 cm(23.62 in.)  
13. 9D-5979 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 69 cm(27.17 in.)  
14. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 54 cm(21.26 in.)  
15. 9D-5981 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 34 cm(13.39 in.)  
  8S-6393 [1] COUPLING ASSEM.  
16. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
17. 0S-1619 [3] BOLT  
  1D-4717 [3] NUT  
18. 6K-9194 C [1] ELBOW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10920705
 

2G-3430: LINES GP-HYDRAULIC

2G3430 BLADE TIP LINES GROUP--Single Circuit
Part of 9D6985, 2G6319, 9D6995, 9D9900, 9D6410, 2G6323, 9D6415 & 9D9910 Arrangements listed
on Pages 359 through 362 & 386. 8J5913 and 3G5832 Valve parts are shown on Pages 306 and 311B. AN ATTACHMENT
c222727 SEBP1092
2G3430 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 [6] ELBOW  
2. 3K-0360 [12] SEAL  
3. 9D-5977 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 210.63 in. (535 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
4. 0L-1143 [1] BOLT  
5. 8J-5913 [1] VALVE GROUP  
    -OR-
  3G-5832 YC [1] VALVE GROUP  
    (Separate Illustration)
6. 030-8188 [3] CONNECTOR  
7. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 98.04 in. (249 cm)  
  8S-6417 [2] STEM ASSEM.  
  4S-5414 [2] SLEEVE  
8. 2G-3791 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 95.7 in. (243 cm)  
  8S-6417 [2] STEM ASSEM.  
  4S-5414 [2] SLEEVE  
9. 7D-9984 [3] ELBOW  
10. 9D-5970 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 30.32 in. (77 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] STEM ASSEM. (straight)  
  8S-6392 [1] STEM ASSEM. (90 degrees)  
11. 9D-6048 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 38.20 in. (97 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 5P-1075 [3] WASHER .157 in. (4 mm)thick  
13. 0L-1143 [2] BOLT (2.50 in. long)  
    -OR-
  0T-0573 C [2] BOLT (2.75 in. long)  
  7K-4743 C [2] WASHER .250 in. (6.35 mm)thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP10920706
 

9D-6420: BLADE SHIFT LINES GROUP

9D6420 BLADE SHIFT LINES GROUP
Replaced by 2G3420 shown on Page 299
Part of 9D6405 & 9D6430 Power Blade Arrangements listed on Page 385. 8J4568 Swivel & 8J5913 Valve
parts are shown on Pages 302 & 306. AN ATTACHMENT
c165469 SEBP1092
9D6420 BLADE SHIFT LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 3B-4506 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-5983 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 136 cm(53.5 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [16] SEAL  
8. 7D-9984 [6] ELBOW  
9. 7K-1181 [1] STRAP  
10. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 C [2] COUPLING ASSEM.  
  4S-5414 C [2] SLEEVE  
11. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.4 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4629 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 9D-5866 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 184 cm(72.44 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
25. 9D-5871 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 141 cm(55.46 in  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10920707
 

2G-3420: LINES GP-HYDRAULIC

2G3420 BLADE SHIFT LINES GROUP
Part of 9D6405, 2G6318, 9D6430 and 9D9920 Power Blade Arrangements listed on Page 385
8J4568 Swivel, 8J5913 and 3G5832 Valve parts are shown on Pages 302, 306 and 311B. AN ATTACHMENT
c171826 SEBP1092
2G3420 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 145.3 in. (369 cm)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 5P-1075 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
  2P-5943 CH HOSE 50 in. (127 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 7K-1181 [1] STRAP  
10. 2G-2558 [1] HOSE ASSEM. (not serv)  
  2P-5943 CH HOSE 98 in. (249 cm)  
  8S-4055 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
11. 9D-5980 [1] HOSE ASSEM. (not serv)  
  2P-5943 CH HOSE 58.20 in. (148 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 C [2] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    -OR-
  3G-5832 CY [1] VALVE GROUP  
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 2G-2561 [1] HOSE ASSEM. (not serv)  
  2P-5943 CH HOSE 109.9 in. (279 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
25. 0L-1143 [2] BOLT (2.50 in. long)  
    -OR-
  0T-0573 C [2] BOLT (2.75 in. long)  
  7K-4743 C [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP10920708
 

8D-8640: BLADE SHIFT LINES GROUP

8D8640 BLADE SHIFT LINES GROUP
Replaced by 2G3450 shown on Page 301
Part of 9D6985, 9D6995, 9D6410 & 9D6415 Arrangements listed on Pages 359, 361 & 386
8J384 Swivel & 8J5913 Valve parts are shown on Pages 302 & 306. AN ATTACHMENT
c208783 SEBP1092
8D8640 BLADE SHIFT LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [4] BOLT  
3. 3B-4506 [7] LOCKWASHER  
4. 1D-4717 [4] NUT  
5. 9D-5983 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 136 cm(53.5 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [16] SEAL  
8. 7D-9984 [6] ELBOW  
10. 9D-5980 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 C [2] COUPLING ASSEM.  
  4S-5414 C [2] SLEEVE  
11. 9D-5864 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.4 in.)  
  4S-5414 C [2] SLEEVE  
  8S-6417 C [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-0384 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4629 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 3K-8320 [2] CLAMP  
22. 1S-0994 [2] CLIP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10920709
 

2G-3450: LINES GP-HYDRAULIC

2G3450 BLADE SHIFT LINES GROUP
Part of 9D6985, 2G6319, 9D6995, 9D9900, 9D6410, 2G6323, 9D6415 and 9D9910 Arrangements listed on Pages 359
through 362 and 386. 8J384 Swivel, 8J5913 and 3G5832 Valve parts are shown on Pages 302, 306 and 311B
AN ATTACHMENT
c171825 SEBP1092
2G3450 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 145.3 in. (369 cm)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [4] BOLT  
3. 5P-1075 [7] WASHER  
4. 1D-4717 [4] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 50 in. (127 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 1S-0994 [2] CLIP  
10. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 57.2 in. (148 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
11. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 98.04 in. (249 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 C [2] BOLT  
13. 8J-5913 J [1] VALVE GROUP  
    -OR-
  3G-5832 CJ [1] VALVE GROUP  
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-0384 J [1] SWIVEL GROUP  
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 3K-8320 [2] CLAMP  
22. 2G-3791 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 95.7 in.(243 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
23. 0L-1143 [2] BOLT (2.50 in. long)  
    -OR-
  0T-0573 C [2] BOLT (2.75 in. long)  
  7K-4743 C [2] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
  J   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

Caterpillar Parts SIS Catalog 140G :

CENTERSHIFT LINES GROUP
8D-9530 CENTERSHIFT LINES GROUP
VALVE GP-CHECK
8J-9974 VALVE GP-CHECK
VALVE GP-UNLOADING
9J-1762 VALVE GP-UNLOADING
VALVE GP-RELIEF
9J-4818 VALVE GP-RELIEF
VALVE GP-RELIEF
9J-6447 VALVE GP-RELIEF
VALVE GP-COMBINATION
9J-3469 VALVE GP-COMBINATION
VALVE GP-COMBINATION
8J-7239 VALVE GP-COMBINATION
VALVE GP-DIRECT RELIEF
8J-2011 VALVE GP-DIRECT RELIEF
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-LIFT CYLINDER
8D-2820 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
8D-2820 LINES GP-LIFT CYLINDER
BLADE TIP LINES GROUP
8D-8580 BLADE TIP LINES GROUP
LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
BLADE SHIFT LINES GROUP
9D-6420 BLADE SHIFT LINES GROUP
LINES GP-HYDRAULIC
2G-3420 LINES GP-HYDRAULIC
BLADE SHIFT LINES GROUP
8D-8640 BLADE SHIFT LINES GROUP

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.