AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3408 MARINE ENGINE 99U00001-04603 SERVICE EQUIPMENT AND SUPPLIES Caterpillar SIS



MARINE ENGINE 3408B MARINE ENGINE 99U
 3408 MARINE ENGINE 99U00001-04603 SEBP1093 3408B 99U   (1976)

Parts group 3408B:

  For full view, you need register
SERVICE EQUIPMENT AND SUPPLIES
BEARING KITS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
Serial No. 99U1 to 99U6654 inclusive
CRANKSHAFT BEARINGS REPLACEMENTS
CRANKSHAFT BEARINGS REPLACEMENTS
CRANKSHAFT BEARINGS REPLACEMENTS
Serial No. 99U655-Up
CARTRIDGE KITS
CARTRIDGE GP-TURBOCHARGER
9N-3998 CARTRIDGE GP-TURBOCHARGER
9N3998 TURBOCHARGER CARTRIDGE GROUP
Serial No. 99U2729 to 99U2968 inclusive
Part of 8N6953 Turbocharger Group shown on Page 67A
CARTRIDGE GP-TURBOCHARGER
1W-1653 CARTRIDGE GP-TURBOCHARGER
1W1653 TURBOCHARGER CARTRIDGE GP*R
S/N 99U3287-Up. Part Of 1W1654 Turbocharger
1W6809 Turbocharger Cartridge Gp Is Available For Service Replacement
An Attachment
CARTRIDGE GP-TURBOCHARGER
1N-3999 CARTRIDGE GP-TURBOCHARGER
1N3999 TURBOCHARGER CARTRIDGE GP*R
Part Of 1N3991 Turbocharger
An Attachment
CARTRIDGE GP-TURBOCHARGER
9N-6675 CARTRIDGE GP-TURBOCHARGER
9N6675 CARTRIDGE GP-TURBOCHARGER
S/N 99U2969-Up. Part Of 1W1304 Turbocharger
CHARTS & FILMS
NAME PLATES AND TRANSFER
NAME PLATES AND TRANSFER
FILTERS
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 OIL LINES GROUP--L.H. Mounted Filters--Duplex--Part 1 of 2--Type 1
AN ATTACHMENT
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 OIL LINES GROUP--L.H. Mounted Filters--Duplex--Part 2 of 2 -- Type 1
AN ATTACHMENT
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 OIL LINES GROUP--L.H. Mounted Filters--Duplex--Part 1 of 2 -- Type 2
AN ATTACHMENT
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 OIL LINES GROUP--L.H. Mounted Filters--Duplex--Part 2 of 2 -- Type 2
AN ATTACHMENT
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 OIL LINES GROUP--L.H. Mounted Filters--Duplex--Part 1 of 2 -- Type 3
AN ATTACHMENT
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 OIL LINES GROUP--L.H. Mounted Filters--Duplex--Part 2 of 2--Type 3
AN ATTACHMENT
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 FILTER GP--ENGINE OIL--L. H.--DUPLEX--PART 1 OF 2
Type 4
An Attachment
FILTER GP-ENGINE OIL
6N-5032 FILTER GP-ENGINE OIL
6N5032 FILTER GP--ENGINE OIL--L.H.--DUPLEX--PART 2 OF 2
Type 4
An Attachment
COOLER GP-ENGINE OIL
4N-0729 COOLER GP-ENGINE OIL
4N729 OIL COOLER GROUP
AIR CLEANER GROUP
4N-1617 AIR CLEANER GROUP
4N1617 AIR CLEANER GROUP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
4N878 Air Cleaner parts are shown on Page 74
AN ATTACHMENT
AIR CLEANER GP
8N-3111 AIR CLEANER GP
8N3111 AIR CLEANER GP
8N5766-Page 74A
For Use With Low Speed (1200 RPM) Engine Arrangements
An Attachment
AIR CLEANER GP
6N-9075 AIR CLEANER GP
6N9075 AIR CLEANER GROUP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING FOR DIRECT INJECTION TURBOCHARGED ENGINE
4N878 Air Cleaner parts are shown on Page 74. AN ATTACHMENT
AIR CLEANER GP
8N-3371 AIR CLEANER GP
8N3371 AIR CLEANER GROUP--Type 1
FOR USE WITH L.H. DUPLEX FUEL FILTERS AND PRIMARY FUEL FILTERS
4N878 Air Cleaner parts are shown on Page 74. AN ATTACHMENT
AIR CLEANER GP
8N-3371 AIR CLEANER GP
8N3371 AIR CLEANER GROUP--Type 2
FOR USE WITH L.H. DUPLEX FUEL FILTERS AND PRIMARY FUEL FILTERS
8N5766 Air Cleaner parts are shown on Page 74A. AN ATTACHMENT
AIR CLEANER GP
8N-3372 AIR CLEANER GP
8N3372 AIR CLEANER GROUP--Type 1
FOR USE WITH L.H. DUPLEX FUEL FILTERS AND PRIMARY FUEL FILTERS
4N878 Air Cleaner parts are shown on Page 74. AN ATTACHMENT
AIR CLEANER GP
8N-3372 AIR CLEANER GP
8N3372 AIR CLEANER GROUP--Type 2
FOR USE WITH L.H. DUPLEX FUEL FILTERS AND PRIMARY FUEL FILTERS
8N5766 Air Cleaner parts are shown on Page 74A. AN ATTACHMENT
AIR CLEANER GP
4N-0878 AIR CLEANER GP
4N0878 AIR CLEANER GP
Part Of 4N1617, 6N9075, 8N3371 & 8N3372 Air Cleaners
An Attachment
AIR CLEANER GP
8N-5766 AIR CLEANER GP
8N5766 AIR CLEANER GP
Part Of 8N3371, 8N3111 & 8N3372 Air Cleaners
An Attachment
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
4N1981 FUEL FILTER GROUP
Serial No. 99U1 to 99U2806 inclusive
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
4N1981 FUEL FILTER GROUP
Serial No. 99U2807
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
8H7204 FUEL FILTER GROUP--Type 1
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
8H7204 FUEL FILTER GROUP--Type 2
AN ATTACHMENT
FILTER GP-FUEL
6N-6290 FILTER GP-FUEL
6N6290 FUEL FILTER GROUP--Duplex--L.H.--Type 1
AN ATTACHMENT
FILTER GP-FUEL
6N-6290 FILTER GP-FUEL
6N6290 FUEL FILTER GROUP--Duplex--L.H.--Type 2
AN ATTACHMENT
FILTER GP-FUEL
6N-6282 FILTER GP-FUEL
6N6282 FUEL FILTER GROUP--Duplex--R.H.
AN ATTACHMENT
GASKET & SEAL KITS
7N-9013 GASKET SERVICE GROUP
7N9013 GASKET SERVICE GROUP--Cylinder Head--Field Installation
Serial No. 99U1 to 99U584
GASKET KITS
GASKET KITS
LUBRICANTS & FLUIDS
COOLANT CONDITIONER GP
2W-0247 COOLANT CONDITIONER GP
2W247 COOLANT CONDITIONER GROUP--Type 1
AN ATTACHMENT
COOLANT CONDITIONER GP
2W-0247 COOLANT CONDITIONER GP
2W247 COOLANT CONDITIONER GROUP--Type 2
AN ATTACHMENT
COOLANT CONDITIONER GP
2W-0248 COOLANT CONDITIONER GP
2W248 COOLANT CONDITIONER GROUP--Type 1
AN ATTACHMENT
COOLANT CONDITIONER GP
2W-0248 COOLANT CONDITIONER GP
2W248 COOLANT CONDITIONER GROUP--Type 2
AN ATTACHMENT
KIT-REBUILD
3N-8952 KIT-LOCK & SEALING
3N8952 MARINE GEAR LOCK AND SEALING KIT
Part of 3N8951 Marine Society Spare Parts Kit listed on Page 216
AN ATTACHMENT
3N-8955 KIT-LOCK & SEALING
3N8955 LOCK AND SEALING KIT--Part 1 of 2
Part of 3N8954 Marine Society Spare Parts Kit listed on Page 217
AN ATTACHMENT
3N-8955 KIT-LOCK & SEALING
3N8955 LOCK AND SEALING KIT--Part 2 of 2
Part of 3N8954 Marine Society Spare Parts Kit listed on Page 217
AN ATTACHMENT
3N-8958 LOCK AND SEALING KIT
3N8958 LOCK AND SEALING KIT--Part 1 of 2
Part of 3N8957 Marine Society Spare Parts Kit listed on Page 218
AN ATTACHMENT
3N-8958 LOCK AND SEALING KIT
3N8958 LOCK AND SEALING KIT--Part 2 of 2
Part of 3N8957 Marine Society Spare Parts Kit listed on Page 218
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
New Caterpillar Publication, "Questions And Answers About Engine Bearings" Is Available
1980/08/13
Reuse Of Engine Bearings
1983/05/25
Reuse Of Engine Bearings
1983/11/30
"Off-Size" Bearing Kits Available
1991/10/01
Special Instruction
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Disassembly and Assembly
Camshaft Bearings
3408C & 3412C MARINE ENGINES
Connecting Rod Bearings
3408C & 3412C MARINE ENGINES
Crankshaft Main Bearings
3408C & 3412C MARINE ENGINES
Camshaft Bearings
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Connecting Rod Bearings
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Crankshaft Main Bearings
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Main Bearings Used{1203}
1982/05/10
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Design Thrust Plate Used In Crankshaft Group{1201,1202,1203}
1979/08/27
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts
1983/04/27
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Adapter For Disassembly And Assembly Of Turbocharger Cartridge
1977/01/28
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Special Instruction
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Service Magazine
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
Engine News
New Fuel Nozzle Test Sheet Available
1982/10/20
Reference Chart for Engine Improvements
1982/11/10
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01
New Engine Wall Charts Give Maintenance Management Recommendations
1989/03/01
New Engine Information Plates Require More Information{1000}
1996/02/16
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Specifications
V-Belt Tension Chart
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Service Charts and Decals Available {0374, 0375, 7405, 7557}
2000/03/06
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
Engine News
New Oil Cooler Bonnets Used On 3408 And 3412 Engines
1979/04/25
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly
1979/10/03
Stronger Braces Used Between Air Cleaner And Engine
1980/03/12
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Single Connector Prevents Leakage From Fuel Filter Lines Groups
1981/07/15
A Soot Filter Is Available For Use With Air Cleaners
1984/12/12
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install
1987/02/01
New Oil Change Recommendations For Severe Applications
1989/08/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing
1992/02/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Lubrication Specifications{1318}
1994/03/01
Installation Procedure For 1R-0716 Engine Oil Filter {1318}
1994/06/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
8N-4617 Air Cleaner Clamp Kit Available{1051}
1998/03/01
90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator
1978/12/13
The New 211-4359 Engine Oil Filter is Now Available for Compact Installations {1308}
2002/10/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/01
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-Australia
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-CFEL
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-CSARL
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-Americas
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Specifications
Primary Fuel Filter
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Duplex Fuel Filters
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Air Cleaners
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Air Cleaner Adapter
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Duplex Oil Filters
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Fuel Filter Base
3408C and 3412C Marine Engines
Fuel Filter Base
3408B and 3408C Industrial and Marine Engines
Fuel Filter (Primary)
3408B and 3408C Industrial and Marine Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-Asia
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-APD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Disassembly and Assembly
Fuel Filter & Fuel Filter Base
3408C & 3412C MARINE ENGINES
Oil Filters & Oil Filter Base
3408C & 3412C MARINE ENGINES
Engine Oil Cooler
3408C & 3412C MARINE ENGINES
Air Filter
3408C & 3412C MARINE ENGINES
Fuel Priming Pump And Filter Base
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Oil Bypass Valves (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Oil Filter Base (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Engine Oil Cooler (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Oil Filter Base (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Oil Bypass Valves (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Engine Oil Cooler And Cooler Lines (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Stronger Braces Used Between Air Cleaner And Engine{1051}
1980/02/25
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
1981/07/06
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Larger Capacity Oil Pan Permits Longer Oil Change Interval{1302,1307}
1984/01/30
A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator{1051,7452}
1978/12/04
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
New Oil Cooler Bonnets Used On 3408 And 3412 Engines{1378,1354,1380}
1979/04/23
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly{1051,1054}
1979/10/01
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Engine News
Gasket Kits
1982/02/10
Silicone Rubber Water Seals Available
1987/07/01
9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/04/01
Replacement Seals And Wear Sleeves Now Available As A Crankshaft Seal Kit
1978/03/01
New Gasket Kits To Service Caterpillar Diesel And Natural Gas Engines
1978/08/16
Improvements to Caterpillar's Gasket Kits for Engines {7555}
2001/01/01
A New Integral Seal Provides Improved Sealing {7555}
2003/12/01
A New Exhaust Gasket is Now Available {1059}
2006/03/20
A New Integral Seal is Now Used {1157, 7555}
2009/02/16
Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
2009/10/29
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-NACD
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-APD
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
New, Tougher Gasket Used Between Block And Front Housing{1151,7555}
1985/12/09
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Installation Procedure For Crankshaft Wear Sleeves Changed{1202,1160,1161}
1977/09/05
Silicone Rubber Water Seals Available{1100}
1987/07/06
Replacement Seals And Wear Sleeves Now Available As A Crankshaft Seal Kit{1202,1160,1161}
1978/02/27
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/08/06
Engine News
Use Of Metric Fasteners
1981/11/25
9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/04/01
8N-4617 Air Cleaner Clamp Kit Available{1051}
1998/03/01
Special Instruction
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}
Service Magazine
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01
The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/01
The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
2002/12/01
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Special Instruction
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Reuse And Salvage Guidelines
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
General Salvage and Reconditioning Techniques {0374, 1000}
General Salvage and Reconditioning Techniques {0374, 1000}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Service Magazine
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31
The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/13
Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
2002/06/03
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
Engine News
Why Engines Are Damaged By Fuel Sulfur
1979/08/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur
1982/05/12
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/08/25
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests
1982/09/22
Fuel Sulfur Analyzer Available
1986/01/01
High Silicates In Antifreeze
1986/02/01
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New 8T2998 Lubricant Available
1986/03/01
High Silicates In Antifreeze
1986/03/01
Caterpillar Antifreeze Now Used And Available From Parts Departments
1986/11/01
Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit
1987/04/01
Cooling System Conditioner
1987/04/01
Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates
1988/02/01
New Publication Available-&quot;Diesel Fuels And Your Engine&quot;
1988/03/01
Extraction Tools For &quot;Live Oil Sampling&quot;
1988/05/01
Lubricant Supplement Lists Specifications For CXP Lubricants
1988/06/01
Lubrication Specifications{1318}
1994/03/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/01
Understanding Elevated Copper Levels in Used Oil Samples {1348, 7542}
2003/02/01
Special Publication, SEBU6251, "Caterpillar Commercial Diesel Engine Fluids Recommendations" has been Revised {0645, 1000, 1250, 1280, 1300, 1348, 1350, 1395}
2004/05/01
Caterpillar Extended Life Inhibitor (ELI) Is Now Available for Use in Applications that Freeze Protection Is Not Needed {1350, 1352, 1395}
2010/10/06
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Specifications
Coolant Conditioner Base
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Disassembly and Assembly
Oil Filters &amp; Oil Filter Base
3408C & 3412C MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
High Silicates In Antifreeze{1350}
1986/02/03
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Caterpillar Antifreeze Now Used And Available From Parts Departments{1350,1395}
1986/11/10
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23
Cooling System Conditioner{1395,1350}
1987/03/23
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22
New Publication Available-&quot;Diesel Fuels And Your Engine&quot;{0374,0375,0645}
1988/03/21
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25
A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21
A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/19
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2002/04/01
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
Truck Engine News
The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/08/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Engine News
Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1979/01/10
Protect Your Reconditioned Or Rebuilt Engines During Start-Up
1980/10/01
Double-Check Those Dimensions
1980/11/12
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Changes Have Been Made To Caterpillar Service Literature
1981/03/04
&quot;SIRS User Instructions&quot; Available
1982/02/24
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07
Hunting Down The Cheaters
1985/06/01
Keeping The Product Information System Up-To-Date
1985/10/01
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01
New Index Lists Engine Special Instructions By SMCS Code
1986/04/01
List of Service Publications
1986/05/01
Service Reminders For 3400 Family Of Diesel Engines
1986/06/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Three Types Of Maintenance Management Publications Available For Engines
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
List of Service Publications
1986/10/01
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals
1986/11/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
List of Service Publications
1987/02/01
List of Service Publications
1987/08/01
List of Service Publications
1988/01/01
List of Service Publications
1988/04/01
List of Service Publications
1988/10/01
New Engine Wall Charts Give Maintenance Management Recommendations
1989/03/01
Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products
1989/08/01
&quot;Ugly's Electrical-References&quot; SEBD0983, Now Available
1990/06/01
List of Service Publications
1990/10/01
List of Service Publications{0374,0375}
1991/03/01
List of Service Publications
1991/06/01
List of Service Publications
1991/08/01
List of Service Publications{0374,0375}
1991/12/01
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing
1992/02/01
List of Service Publications
1992/02/01
List of Service Publications
1992/10/01
List of Service Publications
1993/03/01
List of Service Publications
1993/08/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
New Color For Fiche In Engine Numerical Parts Record Library
1978/07/05
New Gasket Kits To Service Caterpillar Diesel And Natural Gas Engines
1978/08/16
Tips For Service Information Retrieval System (SIRS) Users
1978/11/15
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01
The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/09/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Special Instruction
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Service Magazine
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Three Types Of Maintenance Management Publications Available For Engines{0374}
1986/06/09
New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
3400 Engine Major Component Performance Guide Available{0374}
1987/07/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22
New Publication Available-&quot;Diesel Fuels And Your Engine&quot;{0374,0375,0645}
1988/03/21
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Maintenance Procedures For Extended FPTO Life On 3408 And 3412 Marine Engines{3055}
1979/03/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly{1051,1054}
1979/10/01
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Publication Available-&quot;Coolant And Your Engine&quot;{1395,0374,0375}
1989/02/13
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
Preventive Maintenance For Batteries{1401}
1989/03/27
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Worldwide Service Directories Available For Marine, Petroleum, Power Generation Products{0354,0370,0374,0375,1022,4450}
1989/08/14
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31
Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
2001/08/20
Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374}
2001/12/03
A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Engine News
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Instructions for Warranty Claims on Paint for Marine Engines {0652}
2004/05/01
Service Magazine
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Engine News
3400 Engine Major Component Performance Guide Available
1987/07/01
&quot;Off-Size&quot; Bearing Kits Available
1991/10/01
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
Engine Storage; Engine Start-Up After Storage
1982/02/24
Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/05/12
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Special Instruction
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R4679 AND 0R4680 WATER PUMPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5733 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Magazine
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Maintenance Procedures For Extended FPTO Life On 3408 And 3412 Marine Engines{3055}
1979/03/19
Preventive Maintenance For Batteries{1401}
1989/03/27
New Temperature Regulators; Regulator Service Hours Changed{1330,0770,1355,7527,7543}
1990/10/15
Engine News
Revision To Guideline For Reusable Parts Is Available
1979/03/14
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Protect Your Reconditioned Or Rebuilt Engines During Start-Up
1980/10/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/04/07
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19
Reuse Of Engine Bearings
1983/05/25
Reuse Of Engine Bearings
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Reconditioning of 2W8903 and/or 7W8003 Junction Box Groups{7426}
Reconditioning of 2W8903 and/or 7W8003 Junction Box Groups{7426}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Tool Operating Manual
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Reuse And Salvage Guidelines
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Thermal Spray Procedures for Exhaust Manifold (I.D. &amp; O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
A Guide to Reman Product Markings is Now Available {7754}
2015/09/18
Engine News
Real Value Available Through Caterpillar Remanufacturing Programs
1980/02/06
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts
1980/09/10
Remanufactured Connecting Rod Assemblies
1984/02/22
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Standard Diameter Crankshafts Meeting Marine Society Approval Requirements Are Available Through Caterpillar Remanufactured Products Program
1986/07/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Cracks In Phenolic Water Pump Impellers In Remanufactured Water Pumps {1364}
1995/03/01
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
A Guide to Reman Product Markings is Now Available {7754}
2015/09/17
Special Instruction
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
A Guide to Cat<SUP>&reg;</SUP> Reman Product Markings {7754}
A Guide to Cat® Reman Product Markings {7754}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}
Thermal Spray Procedures for Exhaust Manifold (I.D. &amp; O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Service Magazine
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Standard Diameter Crankshafts Meeting Marine Society Approval Requirements Are Available Through Caterpillar Remanufactured Products Program{1202}
1986/06/23
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
A Guide to Reman Product Markings is Now Available {7754}
2015/09/15
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group
1980/05/14
Timing Groups To Be Canceled
1980/07/09
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
6V3150 Engine Pressure Group And 6V3121 Multitach Group Are Available For Testing Engines
1981/01/28
Changes Have Been Made To Caterpillar Service Literature
1981/03/04
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal And Installation Of Piston Pin Bearings
1981/04/22
New Tool Makes Glow Plug Wire Removal Easier
1981/05/20
Instruction Cards For &quot;Go-No Go&quot; Gauges Now Available
1981/07/01
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation
1981/08/26
New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/24
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Use The 6V6059 Microlite With The 6V2196 Inspection Microscope
1982/04/07
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Separate Valve Stem Gauges Available
1982/08/25
New Instruction Card Available For 6V87 Valve Stem Gauge
1982/09/22
Dial Bore Gauge And Size Setting Fixture Available
1982/09/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/11/10
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/15
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/27
Change 6V3060 EGR Testers To LES Testers
1983/04/27
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Use Vacuum Tester For Quality Control Check Of Water Pump Seal
1984/08/08
Hunting Down The Cheaters
1985/06/01
Fuel Sulfur Analyzer Available
1986/01/01
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems
1987/05/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
New Service Tools Available
1987/08/01
Fluid Sampling Tools For Nonpressurized Compartments
1988/03/01
Extraction Tools For &quot;Live Oil Sampling&quot;
1988/05/01
New Service Tools Available
1988/10/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Cylinder Pack Puller Groups Improved
1993/01/01
Wear Sleeve Removal Tooling May &quot;Mark&quot; The Crankshaft{1202,1161}
1995/08/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
Caterpillar Electronic Technician (CAT ET) {0700}
1996/01/17
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/04/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U6602 Photo-Tach Group{0775}
Using the 1U6602 Photo-Tach Group{0775}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Assembly Of 6V97 Engine Stand{0630}
Assembly Of 6V97 Engine Stand{0630}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using The 6V7899 Size Setting Fixture Group{651}
Using The 6V7899 Size Setting Fixture Group{651}
Use Of 6V7762 Dual Hook Hoist And Installation Of 6V7919 Conversion Group{641}
Use Of 6V7762 Dual Hook Hoist And Installation Of 6V7919 Conversion Group{641}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Technical Information Bulletin
M0077752: Periodic Inspection and Maintenance required on 4C-9832 Engine Rollover Stand {1154}
M0077752: Periodic Inspection and Maintenance required on 4C-9832 Engine Rollover Stand {1154}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Shop Review
Engine Component Racks
Engine Component Racks
Engine Stands
Engine Stands
Bench Test Procedures
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Use Gas Detector Tubes That Have Expired Dates To &quot;Break In&quot; The Combustion Chambers For The Fuel Sulphur Analyzer Group{0651}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
Assembly Procedure For The 5P4721 Tube (Part Of The 5P4149 Conversion Group And 5P4150 Nozzle Testing Group){0650}
1977/10/24
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Four New Contact Points Added To 5P6524 Engine Timing Indicator Group{0653}
1978/08/07
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Temperature Regulators; Regulator Service Hours Changed{1330,0770,1355,7527,7543}
1990/10/15
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17
New Hydraulic Wrenches and Pumps {0602, 0615}
2000/06/05
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/03/29
A Corrosion Testing Cable Group Helps Determine if Engine Parts Are Subject to Corrosion {0779, 0781, 0785}
2004/07/01
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
How To Obtain Correct Delivery Date For Warranty Claims
1978/10/18
Provide Proper Documentation of Returned Parts within the Warranty Claim {1000}
2007/09/10
Operation and Maintenance Manual
Federal Emission Control Warranty
Federal Emissions Warranty Information
Emissions Warranty Information
Federal Emissions Warranty Information
Service Magazine
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine News
Engine Overhaul Foundational Kits Are Available for 3408 Marine Engines {1000}
2014/03/28
Special Instruction
Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
450-3948 Major Engine Overhaul Foundational Kit for 3408 Marine Engines{1000}
450-3948 Major Engine Overhaul Foundational Kit for 3408 Marine Engines{1000}
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Truck sale:

1986 CAT 3408B
USD $34,000 
1986 CAT 3408B

Empire Power Systems
PHOENIX, Arizona
CAT 3408B
USD $9,228 
CAT 3408B

The Dutch Engine and Pump Company BV
Ridderkerk, The Netherlands
CAT 3408B
Call 
CAT 3408B

Coastal Power & Equipment
Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.