BASIC ENGINE
PISTON & ROD GPCAMSHAFT GP
CYLINDER HEAD GP
BASIC ENGINE
PISTON & ROD GP#SEBP10930030
7N-3517: PISTON & ROD GP
7N3517 ROD & PISTON GP--8 REQUIRED
S/N 99U2012-Up
For Precombustion Chambered Turbocharged Aftercooled Engine
S/N 99U2012-Up
For Precombustion Chambered Turbocharged Aftercooled Engine
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7N-9807 C | [1] | PIN-PISTON | |
2. | 8N-7295 C | [2] | RETAINER-PIN | |
3. | 7N-3229 R | [1] | ROD AS | |
8N-0706 C | [1] | BEARING | ||
4. | 6N-8942 | [2] | BOLT-CONNECTING ROD | |
8L-3441 | [2] | NUT | ||
5. | 1W-7524 C | [1] | BEARING | |
4W-5702 CA | [1] | BEARING-CONNECTING ROD | ||
.63MM(.025IN.)UNDERSIZE | ||||
4W-5703 CA | [1] | BEARING-CONNECTING ROD | ||
1.27MM(.050IN.)UNDERSIZE | ||||
6. | 8N-0843 C | [1] | PISTON GP | |
7. | 7N-7078 | [1] | RING-OIL (OIL) | |
8. | 2P-2817 | [1] | RING-INTERMEDIATE (INTERMEDIATE) | |
9. | 8N-0502 | [1] | RING-PISTON (TOP) | |
8N-0822 CA | [1] | RING GP-PISTON | ||
(INCLUDES COMPLETE | ||||
SET OF RINGS | ||||
FOR ONE PISTON) | ||||
A | NOT PART OF THIS GROUP | |||
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMFG PART MAY BE AVAILABLE |
#SEBP10930031
7N-3518: PISTON & ROD GP
7N3518 ROD & PISTON GP--8 REQUIRED
S/N 99U1701--2807
For Direct Injection Turbocharged Engine
S/N 99U1701--2807
For Direct Injection Turbocharged Engine
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1M-6101 | [1] | PIN | |
2. | 008-3214 | [2] | RING | |
3. | 7N-3229 R | [1] | ROD ASSEM. | |
(Includes) | ||||
7N-3230 | [1] | BEARING | ||
4. | 6N-8942 | [2] | BOLT | |
8L-3441 | [2] | NUT | ||
5. | 6N-7436 | [1] | BEARING | |
6N-4166 H | [1] | BEARING .025 in.(.64 mm) undersize | ||
6N-4167 H | [1] | BEARING .050 in.(1.27 mm) undersize | ||
6. | 8N-0842 C | [1] | PISTON GROUP | |
(Includes) | ||||
7. | 7N-7078 | [1] | RING (oil) | |
8. | 2P-2817 | [1] | RING (intermediate) | |
9. | 8N-0502 | [1] | RING (top) | |
8N-0822 CH | [1] | RING GROUP | ||
(Consists of complete set of Rings for one Piston) | ||||
H | NOT PART OF THIS GROUP | |||
R | REMFG PART MAY BE AVAILABLE |
#SEBP10930032
7N-3518: PISTON & ROD GP
7N3518 CONNECTING ROD AND PISTON GROUP--8 Required
Serial No. 99U2808 to 99U4159 inclusive
For Direct Injection Turbocharged Engine
Serial No. 99U2808 to 99U4159 inclusive
For Direct Injection Turbocharged Engine
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8N-1608 C | [1] | PIN-PISTON | |
2. | 8N-7295 C | [2] | RETAINER-PIN | |
3. | 8N-1728 CR | [1] | ROD AS-CONNECTING | |
8N-2018 | [1] | BEARING-SLEEVE | ||
4. | 6N-8942 | [2] | BOLT-CONNECTING ROD | |
8L-3441 | [2] | NUT | ||
5. | 1W-7524 C | [1] | BEARING | |
8N-5427 CA | [1] | BEARING-CONNECTING ROD | ||
.64MM(.025 IN)UNDERSIZE | ||||
8N-5428 CA | [1] | BEARING-CONNECTING ROD | ||
1.27MM(.050 IN)UNDERSIZE | ||||
6. | 8N-1496 C | [1] | PISTON GP | |
7. | 7N-7078 J | [1] | RING-OIL | |
8. | 2P-2817 J | [1] | RING-INTERMEDIATE | |
9. | 8N-0502 J | [1] | RING-PISTON (TOP) | |
8N-0822 A | [1] | RING GP-PISTON | ||
(CONSISTS OF COMPLETE | ||||
SET OF RINGS FOR ONE | ||||
PISTON) | ||||
(INCL PARTS MARKED J) | ||||
A | NOT PART OF THIS GROUP | |||
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMFG PART MAY BE AVAILABLE |
#SEBP10930033
2W-9054: PISTON & ROD GP
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8N-1608 | [1] | PIN | |
2. | 8N-7295 | [2] | RETAINER | |
3. | 8N-1728 R | [1] | ROD AS. | |
8N-2018 | [1] | BEARING | ||
4. | 6N-8942 | [2] | BOLT | |
8L-3441 | [2] | NUT | ||
5. | 1W-7524 C | [1] | BEARING (STANDARD) | |
4W-5702 CA | [1] | BEARING | ||
.025IN. (.63MM)UNDERSIZE | ||||
4W-5703 CA | [1] | BEARING | ||
.050IN. (1.27MM)UNDERSIZE | ||||
6. | 2W-9053 Y | [1] | PISTON GROUP | |
R | REMFG PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION | |||
A | NOT PART OF THIS GROUP | |||
C | INDICATES CHANGE |
#SEBP10930034
2W-9053: PISTON GP
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-0865 R | [1] | BODY AS-PISTON | |
2. | 1W-9460 | [1] | RING (TOP) | |
3. | 2P-2817 | [1] | RING-INTERMEDIATE | |
4. | 7N-7078 | [1] | RING-OIL | |
1W-8922 FA | [1] | RING GP-PISTON (STANDARD) | ||
(CONSISTS OF A | ||||
COMPLETE SET OF RINGS | ||||
FOR ONE PISTON) | ||||
A | NOT PART OF THIS GROUP | |||
F | NOT SHOWN | |||
R | REMFG PART MAY BE AVAILABLE |
#SEBP10930035
4N-0963: CAMSHAFT GP-SINGLE
4N963 CAMSHAFT GP
S/N 99U1-4490
S/N 99U1-4490
#SEBP10930036
4N-0963: CAMSHAFT GP-SINGLE
4N0963 CAMSHAFT GP
S/N 99U4491-Up
S/N 99U4491-Up
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SIS#SEBP10930037
4N-1817: CYLINDER HEAD GP
4N1817 CYLINDER HEAD GP*R
S/N 99U1-583. For Precombustion Chambered
Turbocharged Aftercooled Engine. 4N1710-Page 19
S/N 99U1-583. For Precombustion Chambered
Turbocharged Aftercooled Engine. 4N1710-Page 19
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4N-3714 | [8] | CHAMBER ASSEM. | |
2. | 2S-2251 | [8] | SEAL | |
3. | 4N-7253 | [8] | GASKET | |
4. | 5M-6214 C | [4] | PLUG | |
5. | 4N-1710 CY | [2] | CYLINDER HEAD | |
(Separate Illustration) | ||||
6. | 0L-1352 | [11] | BOLT | |
7. | 3J-5390 | [2] | PLUG | |
8. | 3J-5389 | [2] | PLUG | |
9. | 1B-5174 | [2] | PLUG | |
10. | 4S-6137 C | [16] | STUD | |
11. | 4N-1820 | [2] | GASKET | |
12. | 2H-3750 | [28] | BOLT | |
5H-1504 | [28] | WASHER | ||
13. | 4N-2269 | [32] | SEAL | |
14. | 5P-0063 | [4] | PLUG | |
15. | 4N-0932 | [2] | PLUG | |
16. | 0T-0055 | [1] | BOLT | |
17. | 5M-2894 | [9] | WASHER | |
18. | 5B-2638 | [3] | BOLT | |
19. | 6N-6494 | [1] | SUPPORT | |
20. | 6N-6493 | [1] | SUPPORT | |
21. | 2B-0858 C | [2] | PLUG | |
22. | 9N-2607 C | [1] | BRACKET | |
23. | 0S-1591 C | [2] | BOLT | |
24. | 9N-2583 C | [1] | BRACKET | |
25. | 8S-9191 C | [3] | BOLT | |
C | INDICATES CHANGE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP10930038
4N-1817: CYLINDER HEAD GP
4N1817 CYLINDER HEAD GP*R
S/N 99U584-2228. For Precombustion Chambered
Turbocharged Aftercooled Engine. 6N9979-Page 19B
S/N 99U584-2228. For Precombustion Chambered
Turbocharged Aftercooled Engine. 6N9979-Page 19B
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4N-3714 | [8] | CHAMBER ASSEM. | |
2. | 2S-2251 | [8] | SEAL | |
3. | 4N-7253 | [8] | GASKET | |
4. | 5M-6214 C | [2] | PLUG | |
5. | 6N-9979 CY | [2] | CYLINDER HEAD | |
(Separate Illustration) | ||||
6. | 0L-1352 | [11] | BOLT | |
7. | 3J-5390 | [2] | PLUG | |
8. | 3J-5389 | [2] | PLUG | |
9. | 1B-5174 | [2] | PLUG | |
10. | 4S-6137 | [16] | STUD | |
11. | 4N-1820 | [2] | GASKET | |
12. | 2H-3750 | [28] | BOLT | |
5H-1504 | [28] | WASHER | ||
13. | 4N-2269 | [32] | SEAL | |
14. | 5P-0063 | [4] | PLUG | |
15. | 4N-0932 | [2] | PLUG | |
16. | 0T-0055 | [1] | BOLT | |
17. | 5M-2894 | [9] | WASHER | |
18. | 5B-2638 | [3] | BOLT | |
19. | 6N-6494 | [1] | SUPPORT | |
20. | 6N-6493 | [1] | SUPPORT | |
21. | 2B-0858 | [2] | PLUG | |
22. | 9N-2607 | [1] | BRACKET | |
23. | 0S-1591 | [2] | BOLT | |
24. | 9N-2583 | [1] | BRACKET | |
25. | 8S-9191 | [3] | BOLT | |
C | INDICATES CHANGE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP10930039
4N-1817: CYLINDER HEAD GP
4N1817 CYLINDER HEAD GP*R
S/N 99U2229-3558. For Precombustion Chambered
Turbocharged Aftercooled Engine. 6N9979-Page 19B
S/N 99U2229-3558. For Precombustion Chambered
Turbocharged Aftercooled Engine. 6N9979-Page 19B
Parts for your 3408 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4N-3714 | [8] | CHAMBER ASSEM. | |
2. | 2S-2251 | [8] | SEAL | |
3. | 4N-7253 | [8] | GASKET | |
4. | 5M-6214 | [2] | PLUG | |
5. | 6N-9979 Y | [2] | CYLINDER HEAD | |
(Separate Illustration) | ||||
6. | 0L-1352 | [11] | BOLT | |
7. | 3J-5390 | [2] | PLUG | |
8. | 3J-5389 | [2] | PLUG | |
9. | 1B-5174 | [2] | PLUG | |
10. | 4S-6137 | [16] | STUD | |
11. | 4N-1820 | [2] | GASKET | |
12. | 2H-3750 | [28] | BOLT | |
5H-1504 | [28] | WASHER | ||
13. | 4N-2269 | [32] | SEAL | |
14. | 5P-0063 | [4] | PLUG | |
15. | 4N-0932 | [2] | PLUG | |
16. | 1A-5183 C | [2] | BOLT | |
17. | 5M-2894 C | [5] | WASHER | |
18. | 5B-2638 C | [2] | BOLT | |
19. | 6N-6731 C | [1] | SUPPORT | |
20. | 6N-6732 C | [1] | SUPPORT | |
21. | 2B-0858 | [2] | PLUG | |
22. | 9N-2607 | [1] | BRACKET | |
23. | 0S-1591 | [2] | BOLT | |
24. | 9N-2583 | [1] | BRACKET | |
25. | 8S-9191 | [3] | BOLT | |
C | INDICATES CHANGE | |||
Y | SEPARATE ILLUSTRATION |
Information:
BASIC ENGINE
PISTON & ROD GP
Engine News
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Disassembly and Assembly
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
1981/07/13
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
1982/08/09
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
1983/09/12
Stronger Piston Is Used; Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218}
1977/09/19
1977/09/19
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
1978/04/17
Cylinder Kits Not Recommended For Use In 3400 Family of Marine Engines And D8N Tractors{1214}
1991/05/20
1991/05/20