AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP--FIELD INSTALLATION--PART 2 of 2 Type 2. 8N1635--Page 113F.06 3408


FUEL SYSTEM
GOVERNOR GP

MARINE ENGINE 3408 MARINE ENGINE 99U
 3408 MARINE ENGINE 99U00001-04603 SEBP1093 3408 99U   (1976)

FUEL SYSTEM

GOVERNOR GP
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
 

#SEBP10930380
 

8N-3104: CONVERSION GP-WOODWARD GOV

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP--FIELD INSTALLATION--PART 2 of 2
Type 2. 8N1635--Page
113F.06
c176834 SEBP1093
8N3104 CONVERSION GP-WOODWARD GOV Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2834 [1] WASHER  
2. 7S-5757 [1] RING  
3. 4N-9766 [1] PINION  
4. 4N-0907 [1] LEVER  
5. 6N-2838 [1] SHAFT  
6. 7J-9018 [2] BOLT  
7. 6N-2835 [1] LEVER  
8. 1S-7984 [2] BEARING  
9. 2M-2489 [2] SEAL  
10. 8N-1635 YC [1] SWITCH GROUP  
11. 6N-2839 [1] SHAFT  
12. 6N-2836 [1] LEVER  
13. 6N-6926 [1] SPRING  
14. 8H-3127 [2] BOLT  
15. 4N-9767 [1] ADAPTER  
16. 4N-1104 [1] GASKET  
17. 031-0215 [1] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930381
 

8N-3104: CONVERSION GP-WOODWARD GOV

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP--FIELD INSTALLATION--PART 1 of 2
Type 3. 8N6951--Page
113F.04, 6N1656--Page 113G.03 & 4N9792--Page 113G.04
c230769 SEBP1093
8N3104 CONVERSION GP-WOODWARD GOV Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-6951 YC [1] GOVERNOR GROUP  
    (Separate Illustration)
2. 4N-9792 Y [1] FASTENER GROUP  
    (Separate Illustration)
3. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
4. 0S-1617 [2] BOLT  
  9M-1974 [2] WASHER  
5. 6N-1656 Y [1] DRIVE GROUP  
    (Separate Illustration)
6. 4N-1868 [1] GASKET  
7. 7B-2742 [1] BOLT  
8. 5P-0537 [3] WASHER  
9. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
10. 2A-0762 [1] BOLT  
11. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
12. 1L-5316 [1] PIN  
13. 0S-1616 [1] BOLT  
14. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK  
15. 6N-2955 [1] SWITCH (rack stop)  
16. 6N-2837 [1] COVER  
  1H-3943 [1] WASHER  
17. 1F-9303 [1] LEVER  
18. 2H-3738 [1] BOLT  
19. 5K-9246 [1] CONNECTOR  
20. 6N-2832 [1] TUBE ASSEM.  
21. 5K-9235 [1] ELBOW  
22. 2H-5330 [5] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930382
 

8N-3104: CONVERSION GP-WOODWARD GOV

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP--FIELD INSTALLATION--PART 2 of 2
Type 3. 8N6670--Page
113F.06 Woodward Governor Switch Gp
c230770 SEBP1093
8N3104 CONVERSION GP-WOODWARD GOV Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2834 [1] WASHER  
2. 7S-5757 [1] RING  
3. 4N-9766 [1] PINION  
4. 4N-0907 [1] LEVER  
5. 6N-2838 [1] SHAFT  
6. 7J-9018 [2] BOLT  
7. 6N-2835 [1] LEVER  
8. 1S-7984 [2] BEARING  
9. 2M-2489 [2] SEAL  
10. 8N-6670 CY [1] SWITCH GROUP  
    (Separate Illustration)
11. 6N-2839 [1] SHAFT  
12. 6N-2836 [1] LEVER  
13. 6N-6926 [1] SPRING  
14. 8H-3127 [2] BOLT  
15. 4N-9767 [1] ADAPTER  
16. 4N-1104 [1] GASKET  
17. 031-0215 [1] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930383
 

8N-3104: CONVERSION GP-WOODWARD GOV

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP--FIELD INSTALLATION--PART 1 of 2
Type 4.
1W1637-Page 113F.04.02, 6N1656--Page 113G.03 & 4N9792--Page 113G.04
c237503 SEBP1093
8N3104 CONVERSION GP-WOODWARD GOV Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1637 CY [1] GOVERNOR GP  
2. 4N-9792 Y [1] FASTENER GP-WOODWARD GOVERNOR  
3. 4N-5656 [1] COVER-GOVERNOR  
  2P-8643 [1] GASKET  
4. 0S-1617 [2] BOLT  
  9M-1974 [2] WASHER  
5. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
6. 4N-1868 [1] GASKET  
7. 7B-2742 [1] BOLT  
8. 5P-0537 [3] WASHER  
9. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
10. 2A-0762 [1] BOLT  
11. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
12. 1L-5316 [1] PIN-SPRING  
13. 0S-1616 [1] BOLT  
14. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SET SCREW  
15. 1W-1401 C [1] SCREW-RACK STOP  
16. 6N-2837 [1] COVER  
  1H-3943 [1] WASHER  
17. 1F-9303 [1] LEVER-GOVERNOR  
18. 2H-3738 [1] BOLT  
19. 5K-9246 [1] CONNECTOR-FLARED  
20. 6N-2832 [1] TUBE AS  
21. 5K-9235 [1] ELBOW-FLARED  
22. 2H-5330 [5] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930384
 

8N-3104: CONVERSION GP-WOODWARD GOV

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP--FIELD INSTALLATION--PART 2 of 2
Type 4.
8N6670-Page 113F.06 Woodward Governor Switch Gp
c237504 SEBP1093
8N3104 CONVERSION GP-WOODWARD GOV Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2834 [1] WASHER  
2. 7S-5757 [1] RING-RETAINING  
3. 4N-9766 [1] PINION-GOVERNOR DRIVE  
4. 4N-0907 [1] LEVER-SHUT-OFF  
5. 6N-2838 [1] SHAFT  
6. 7J-9018 [2] BOLT-SOCKET HEAD  
7. 6N-2835 [1] LEVER-SHUT-OFF  
8. 1S-7984 [2] BEARING-SLEEVE  
9. 2M-2489 [2] SEAL-LIP TYPE  
10. 8N-6670 Y [1] SWITCH GP-WOODWARD GOVERNOR  
11. 6N-2839 [1] SHAFT  
12. 6N-2836 [1] LEVER-RACK STOP  
13. 3L-6670 C [1] RETAINER-DRIVE  
14. 8H-3127 [2] BOLT  
15. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
16. 4N-1104 [1] GASKET  
17. 031-0215 [1] BOLT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930385
 

8N-3104: CONVERSION GP-WOODWARD GOV

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP--PART 1 OF 2--TYPE 5
8N6951--Page 113F-4, 6N1656--Page 113G.03, 4N9792--Page 113G-4
Field Installation
c410535 SEBP1093
8N3104 CONVERSION GP-WOODWARD GOV Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-6951 CY [1] GOVERNOR GP  
2. 4N-9792 Y [1] FASTENER GP-WOODWARD GOVERNOR  
3. 5K-9235 [1] ELBOW-FLARED  
4. 2H-5330 [5] BOLT  
5. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
6. 4N-1868 [1] GASKET  
7. 7B-2742 [1] BOLT  
8. 5P-0537 [3] WASHER  
9. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
10. 2A-0762 [1] BOLT  
11. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
12. 1L-5316 [1] PIN-SPRING  
13. 0S-1616 [1] BOLT  
14. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SET SCREW  
15. 1W-1401 [1] SCREW-RACK STOP  
16. 6N-2837 [1] COVER  
  1H-3943 [1] WASHER  
17. 1F-9303 [1] LEVER-GOVERNOR  
18. 2H-3738 [1] BOLT  
19. 5K-9246 [1] CONNECTOR-FLARED  
20. 6N-2832 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930386
 

8N-3104: CONVERSION GP-WOODWARD GOV

8N3104 WOODWARD PSG GOVERNOR CONVERSION GP-PART 2 OF 2-TYPE 5
8N6670-Page 113F.06
Field Installation
c349958 SEBP1093
8N3104 CONVERSION GP-WOODWARD GOV Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2834 [1] WASHER  
2. 7S-5757 [1] RING-RETAINING  
3. 4N-9766 [1] PINION-GOVERNOR DRIVE  
4. 4N-0907 [1] LEVER-SHUT-OFF  
5. 6N-2838 [1] SHAFT  
6. 7J-9018 [2] BOLT-SOCKET HEAD  
7. 6N-2835 [1] LEVER-SHUT-OFF  
8. 1S-7984 [2] BEARING-SLEEVE  
9. 2M-2489 [2] SEAL-LIP TYPE  
10. 8N-6670 Y [1] SWITCH GP-WOODWARD GOVERNOR  
11. 6N-2839 [1] SHAFT  
12. 6N-2836 [1] LEVER-RACK STOP  
13. 3L-6670 [1] RETAINER-DRIVE  
14. [2] BOLT  
15. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
16. 4N-1104 [1] GASKET  
17. 031-0215 [1] BOLT-SELF LOCKING  
18. 0S-1591 C [6] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930387
 

6N-9732: GOVERNOR GP-WOODWARD

6N9732 WOODWARD GOVERNOR GROUP
Part of 6N9735 Woodward Governor Group shown on Page 113F-4
c182919 SEBP1093
6N9732 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3910 C [1] COVER ASSEM.  
    (With 24V DC MOTOR)
2. 7N-6052 C [1] SPRING ASSEM.  
3. 5N-3888 [1] SCREW  
4. 6L-3996 [1] SEAT  
5. 3N-5723 [1] SPRING  
6. 2F-2293 [1] GASKET  
7. 7N-4533 C [1] BEARING ASSEM.  
8. 3N-5729 [1] SEAT  
9. 5N-3885 [1] LINK  
10. 5N-3890 [1] SHAFT  
11. 5N-4112 C [1] SPRING  
12. 5N-3915 [1] LINK ASSEM.  
13. 2N-1894 [1] PIN  
14. 6L-9838 [1] SHAFT  
15. 6N-7530 [1] PIN  
16. 3N-5730 C [1] LEVER  
17. 6L-4007 [1] VALVE ASSEM. (relief)  
18. 8N-2276 C [1] STOP ASSEM.  
19. 3N-5728 [1] STRUT  
20. 3N-5727 [1] PISTON  
21. 5N-3939 C [1] CASE ASSEM.  
22. 6L-3990 [2] SPRING  
23. 6L-3997 [1] PISTON  
24. 7L-3107 [1] BASE ASSEM.  
25. 6L-3995 [1] SEAT  
26. 6L-3983 C [1] GEAR (10 teeth)  
27. 6L-4003 [1] BUSHING  
28. 6L-3994 [1] PLUNGER  
29. 7N-0001 [1] SEAT  
30. 5N-3909 [1] CLUTCH ASSEM.  
31. 5N-3889 [1] VALVE (needle)  
32. 5N-3886 [1] SCREW  
33. 5N-3884 C [2] BLOCK  
34. 6F-3480 [1] SLEEVE ASSEM.  
35. 5N-3887 [1] PIN  
36. 5N-3891 [3] WASHER  
37. 5N-3883 [1] SCREW  
  4B-2043 [1] NUT  
38. 5N-3893 [1] BRACKET  
39. 5N-3911 [1] SHAFT  
40. 5N-3913 [1] LEVER  
41. 5N-3916 [1] SLEEVE ASSEM.  
42. 5N-3892 [1] BRACKET  
43. 5N-4111 C [1] SPACER  
44. 6L-3992 C [1] BUSHING  
  C   INDICATES CHANGE
 

#SEBP10930388
 

6N-9735: GOVERNOR GP-WOODWARD

6N9735 WOODWARD GOVERNOR GROUP
Part of 8N3104 Woodward PSG Governor Conversion Group shown on Pages
113F-1 and 113F-2a. 6N9732 Governor parts are shown on Pages 113F-3
c222398 SEBP1093
6N9735 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2299 [1] LEVER  
2. 3L-1474 [1] PIN  
3. 6N-9732 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930389
 

8N-6951: GOVERNOR GP

8N6951 WOODWARD GOVERNOR GROUP--PSG--24 Volt Motor
Part of 8N3104 Woodward PSG Governor Conversion Group shown on Page
113F-2c. 8N6775 Governor parts are shown on Page 113F-5
c176894 SEBP1093
8N6951 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-1474 [1] PIN  
2. 7N-2299 [1] LEVER  
3. 8N-6775 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Fuel Rack Slots Have Improved Wear Resistance
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19
Change 6V3060 EGR Testers To LES Testers
1983/04/27
New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/01
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New Spring Used In Fuel Ratio Control
1977/03/15
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For The Tachometer Drive Group And Transfer Pump
1978/03/01
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Woodward PSG Governor
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Linkage<BR> (Woodward EG-3P)
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Controls
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Air Actuator
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3408C & 3412C MARINE ENGINES
Fuel Injection Pumps
3408C & 3412C MARINE ENGINES
Governor &amp; Fuel Pump Drive
3408C & 3412C MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3408C & 3412C MARINE ENGINES
Governor
3408C & 3412C MARINE ENGINES
Governor
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing And Governor
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly{1365}
1990/07/30
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/10
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

Caterpillar Parts SIS Catalog 3408 :

CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
GOVERNOR GP
7N-6271 GOVERNOR GP
GOVERNOR GP
7N-6271 GOVERNOR GP
GOVERNOR GP
7N-6271 GOVERNOR GP
GOVERNOR GP
7N-6271 GOVERNOR GP
GOVERNOR GP
4N-1894 GOVERNOR GP
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
GOVERNOR GP-WOODWARD
6N-9732 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
6N-9735 GOVERNOR GP-WOODWARD

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.