AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N6951 GOVERNOR GP-WOODWARD-PSG 24 Volt. Type 2 1W1636-Page 113F-5A Part Of 8N3104 Governor 3408 MARINE ENGINE


FUEL SYSTEM
GOVERNOR GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
FUEL SYSTEM
GOVERNOR GP

MARINE ENGINE 3408 MARINE ENGINE 99U
 3408 MARINE ENGINE 99U00001-04603 SEBP1093 3408 99U   (1976)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-WOODWARD
6N-9735 GOVERNOR GP-WOODWARD
GOVERNOR GP
8N-6951 GOVERNOR GP
GOVERNOR GP
8N-6951 GOVERNOR GP
GOVERNOR GP
1W-1637 GOVERNOR GP
GOVERNOR GP
8N-6951 GOVERNOR GP
GOVERNOR GP
1W-1637 GOVERNOR GP
 

#SEBP10930390
 

8N-6951: GOVERNOR GP

8N6951 GOVERNOR GP-WOODWARD-PSG
24 Volt. Type 2
1W1636-Page 113F-5A
Part Of 8N3104 Governor
c237707 SEBP1093
8N6951 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-1474 [1] PIN-TAPER  
2. 7N-2299 [1] LEVER-GOVERNOR OUTPUT  
3. 1W-1636 Y [1] GOVERNOR GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930391
 

1W-1637: GOVERNOR GP

1W1637 WOODWARD GOVERNOR GP
Type 1. 1W1636-Page 113F-5A
Part Of 8N3104 Governor
c235716 SEBP1093
1W1637 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-1474 [1] PIN-TAPER  
2. 7N-2299 [1] LEVER-GOVERNOR OUTPUT  
3. 1W-1636 Y [1] GOVERNOR GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930392
 

8N-6951: GOVERNOR GP

8N6951 GOVERNOR GP-WOODWARD
Type 3
4W6811-Page 113F.04.04
Part Of 8N3104 Governor
c317366 SEBP1093
8N6951 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-1474 [1] PIN-TAPER  
2. 7N-2299 [1] LEVER-GOVERNOR OUTPUT  
3. 4W-6811 CY [1] GOVERNOR GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930393
 

1W-1637: GOVERNOR GP

1W1637 GOVERNOR GP-WOODWARD
Type 2
4W6811-Page 113F.04.04
Part Of 8N3104 Governor
c322098 SEBP1093
1W1637 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-1474 [1] PIN-TAPER  
2. 7N-2299 [1] LEVER-GOVERNOR OUTPUT  
3. 4W-6811 CY [1] GOVERNOR GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10930394
 

4W-6811: GOVERNOR GP

4W6811 GOVERNOR GP-WOODWARD
Part Of 1W1637 & 8N6951 Governors
c317367 SEBP1093
4W6811 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
2. 7N-6052 [1] SPRING AS-SPEED  
3. 1N-3316 [3] SEAL-OIL  
4. 6L-3996 [1] SEAT-SPRING  
5. 3N-5723 [1] SPRING  
6. 2F-2293 [1] GASKET-COVER  
7. 7N-4533 [1] BEARING-THRUST  
8. 3N-5729 [1] SEAT-SPRING  
9. 5N-3885 [1] LINK-SPEED DROOP  
10. 5N-3890 [1] SHAFT-SPEED ADJUSTABLE  
11. 5N-4112 [1] SPRING-TORSION  
12. 5N-3915 [1] LINK AS  
13. 2N-1894 [1] PIN-SPRING WIRE  
14. 6L-9838 [1] SHAFT-TERMINAL  
15. 6N-7530 [1] PIN-PIVOT  
16. 1W-4892 [1] LEVER AS  
17. 6L-4007 [1] VALVE AS-RELIEF  
18. 8N-2276 [1] STOP AS-POWER PISTON  
19. 3N-5728 [1] STRUT-SERVO  
20. 3N-5727 [1] PISTON-POWER  
21. 5N-3939 [1] CASE AS  
22. 6L-3990 [2] SPRING-BUFFER  
23. 6L-3997 [1] PISTON-BUFFER  
24. 5N-7439 [1] BASE AS-PSG GOVERNOR  
25. 6L-3995 [1] SEAT-SPRING  
26. 6L-3983 [1] GEAR-IDLER  
27. 6L-4003 [1] BUSHING-VALVE  
28. 6L-3994 [1] PLUNGER-VALVE  
29. 7N-0001 [1] BALLHEAD AS  
30. 5N-3909 [1] CLUTCH AS  
31. 5N-3889 [1] VALVE-NEEDLE  
32. 5N-3886 [1] SCREW  
33. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
34. 6F-3480 [1] SLEEVE AS-ADJUSTABLE  
35. 5N-3887 [1] PIN  
36. 5N-3891 [3] WASHER  
37. 5N-3883 [1] SCREW-DROOP ADJUSTABLE  
  4B-2043 [1] NUT  
38. 8N-3836 [1] SCREW-BRACKET  
39. 5N-3911 [1] SHAFT AS-DROOP  
40. 5N-3913 [1] LEVER-DROOP  
41. 5N-3916 [1] SLEEVE AS-ADJUSTABLE  
42. 5N-3892 [1] BRACKET  
43. 5N-4111 [1] SPACER  
44. 6L-3992 [1] BUSHING  
45. 1W-4911 [1] COVER  
46. 4W-5123 [1] MOTOR AS  
47. 9N-6225 [4] SCREW  
  9B-1117 [4] LOCKWASHER  
 

#SEBP10930395
 

8N-6775: GOVERNOR GP

8N6775 WOODWARD GOVERNOR GROUP
Part of 8N6951 Woodward Governor Group shown on Page 113F-4
c176895 SEBP1093
8N6775 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-6618 [5] SCREW  
  8F-1434 [5] LOCKWASHER  
2. 7N-6052 [1] SPRING ASSEM.  
3. 1N-3316 [3] SEAL  
4. 6L-3996 [1] SEAT  
5. 3N-5723 [1] SPRING  
6. 2F-2293 [1] GASKET  
7. 7N-4533 [1] BEARING ASSEM.  
8. 3N-5729 [1] SEAT  
9. 5N-3885 [1] LINK  
10. 5N-3890 [1] SHAFT  
11. 5N-4112 [1] SPRING  
12. 5N-3915 [1] LINK ASSEM.  
13. 2N-1894 [1] PIN  
14. 6L-9838 [1] SHAFT  
15. 6N-7530 [1] PIN  
16. 8N-7849 [1] LEVER  
17. 6L-4007 [1] VALVE ASSEM. (relief)  
18. 8N-2276 [1] STOP ASSEM.  
19. 3N-5728 [1] STRUT  
20. 3N-5727 [1] PISTON  
21. 5N-3939 [1] CASE ASSEM.  
22. 6L-3990 [2] SPRING  
23. 6L-3997 [1] PISTON  
24. 5N-7439 [1] BASE ASSEM.  
25. 6L-3995 [1] SEAT  
26. 6L-3983 [1] GEAR (10 teeth)  
27. 6L-4003 [1] BUSHING  
28. 6L-3994 [1] PLUNGER  
29. 7N-0001 [1] BALLHEAD ASSEM.  
30. 5N-3909 [1] CLUTCH ASSEM.  
31. 5N-3889 [1] VALVE (needle)  
32. 5N-3886 [1] SCREW  
33. 5N-3884 [2] BLOCK  
34. 6F-3480 [1] SLEEVE ASSEM.  
35. 5N-3887 [1] PIN  
36. 5N-3891 [3] WASHER  
37. 5N-3883 [1] SCREW  
  4B-2043 [1] NUT  
38. 8N-3836 [1] SCREW  
39. 5N-3911 [1] SHAFT  
40. 5N-3913 [1] LEVER  
41. 5N-3916 [1] SLEEVE ASSEM.  
42. 5N-3892 [1] BRACKET  
43. 5N-4111 [1] SPACER  
44. 6L-3992 [1] BUSHING  
45. 8N-7846 [1] COVER ASSEM.  
  8N-7854 [1] COVER  
46. 8N-7848 [1] MOTOR ASSEM.  
47. 8N-7847 [1] BOOT  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  7N-6807 [1] KIT (hardware)  
 

#SEBP10930396
 

1W-1636: GOVERNOR GP

1W1636 WOODWARD GOVERNOR GROUP
Part of 8N6951 and 1W1637 Woodward Governor Groups shown on Page 113F-4b
c235717 SEBP1093
1W1636 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-6618 [5] SCREW  
  8F-1434 [5] LOCKWASHER  
2. 7N-6052 [1] SPRING ASSEM.  
3. 1N-3316 [1] SEAL  
4. 6L-3996 [3] SEAT  
5. 3N-5723 [1] SPRING  
6. 2F-2293 [1] GASKET  
7. 7N-4533 [1] BEARING ASSEM.  
8. 3N-5729 [1] SEAT  
9. 5N-3885 [1] LINK  
10. 5N-3890 [1] SHAFT  
11. 5N-4112 [1] SPRING  
12. 5N-3915 [1] LINK ASSEM.  
13. 2N-1894 [1] PIN  
14. 6L-9838 [1] SHAFT  
15. 6N-7530 [1] PIN  
16. 1W-4892 [1] LEVER ASSEM.  
17. 6L-4007 [1] VALVE ASSEM. (relief)  
18. 8N-2276 [1] STOP ASSEM.  
19. 3N-5728 [1] STRUT  
20. 3N-5727 [1] PISTON  
21. 5N-3939 [1] CASE ASSEM.  
22. 6L-3990 [2] SPRING  
23. 6L-3997 [1] PISTON  
24. 5N-7439 BASE ASSEM.  
25. 6L-3995 [1] SEAT  
26. 6L-3983 [1] GEAR (10 teeth)  
27. 6L-4003 [1] BUSHING  
28. 6L-3994 [1] PLUNGER  
29. 7N-0001 [1] BALLHEAD ASSEM.  
30. 5N-3909 [1] CLUTCH ASSEM.  
31. 5N-3889 [1] VALVE (needle)  
32. 5N-3886 [1] SCREW  
33. 5N-3884 [2] BLOCK  
34. 6F-3480 [1] SLEEVE ASSEM.  
35. 5N-3887 [1] PIN  
36. 5N-3891 [3] WASHER  
37. 5N-3883 [1] SCREW  
  4B-2043 [1] NUT  
38. 8N-3836 SCREW  
39. 5N-3911 [1] SHAFT ASSEM.  
40. 5N-3913 [1] LEVER  
41. 5N-3916 [1] SLEEVE ASSEM.  
42. 5N-3892 [1] BRACKET  
43. 5N-4111 [1] SPACER  
44. 6L-3992 [1] BUSHING  
45. 1W-4910 [1] COVER ASSEM.  
  1W-4911 [1] COVER  
46. 8N-7848 [1] MOTOR ASSEM.  
47. 8N-7847 [1] BOOT  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  7N-6807 [1] KIT (hardware)  
 

#SEBP10930397
 

8N-1635: SWITCH GP

8N1635 WOODWARD GOVERNOR SWITCH GROUP
Part of 8N3104 Woodward PSG Governor Conversion Group shown on
Page 113F-2b
c222478 SEBP1093
8N1635 SWITCH GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-4576 [1] PLATE  
2. 3L-3911 [1] SWITCH (governor)  
  [1] WIRING DIAGRAM  
 

#SEBP10930398
 

8N-6670: SWITCH GP-WOODWARD GOVERNOR

8N6670 WOODWARD GOVERNOR SWITCH GROUP
Part of 8N3104 Woodward PSG Governor Conversion Group shown on
Pages 113F-2d & 113F-2f
c176707 SEBP1093
8N6670 SWITCH GP-WOODWARD GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-4576 [1] NAMEPLATE  
2. 7N-8008 [1] SWITCH AS (GOVERNOR)  
  [1] DIAGRAM-WIRING  
 

#SEBP10930399
 

9N-3684: PLATE GP-GOVERNOR ADAPTER

9N3684 GOVERNOR ADAPTER PLATE GROUP--Type 1
Serial No. 99U1408-Up. FOR PRECOMBUSTION CHAMBERED TURBOCHARGED AFTERCOOLED ENGINE
Part of 7N6271 Governor Group shown on Page 113F. 6N1947 Piston parts are shown on Pages 114 & 114A
c219374 SEBP1093
9N3684 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT  
2. 6N-8629 [1] SEAT  
3. 4N-3887 [1] RING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 C [1] RACE  
6. 7M-7219 C [1] BEARING  
7. 3K-0810 [1] RING  
8. 6N-7818 [1] LOCK  
9. 5P-5601 C [2] SEAL  
10. 9S-8008 [1] PLUG  
  3D-2824 [1] SEAL  
11. 7N-4554 [1] PLATE ASSEM.  
    (Includes)
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BEARING  
15. 2A-5328 [3] LOCK  
16. 7L-6210 [1] BOLT  
17. 6N-1947 Y [1] PISTON ASSEM.  
    (Separate Illustration)
18. 6N-2501 [1] BRACKET  
  2S-7316 [1] DOWEL  
19. 7N-4555 [1] LEVER  
20. 7N-2351 [1] PIN  
21. 0S-1618 [2] BOLT  
22. 8M-6393 [1] RING  
23. 6N-8783 [1] GEAR (42 teeth)  
24. 9L-6509 [1] WEIGHT ASSEM.  
    (Includes)
25. 1S-5440 [2] DOWEL  
26. 9L-4989 [2] WEIGHT  
27. 2S-0007 [1] SLEEVE  
28. 9M-6302 [2] WASHER  
  9M-6303 [1] SPRING  
29. 6N-8195 C RACE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Fuel Rack Slots Have Improved Wear Resistance
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19
Change 6V3060 EGR Testers To LES Testers
1983/04/27
New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/01
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New Spring Used In Fuel Ratio Control
1977/03/15
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For The Tachometer Drive Group And Transfer Pump
1978/03/01
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Woodward PSG Governor
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Linkage<BR> (Woodward EG-3P)
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Controls
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Air Actuator
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3408C & 3412C MARINE ENGINES
Fuel Injection Pumps
3408C & 3412C MARINE ENGINES
Governor &amp; Fuel Pump Drive
3408C & 3412C MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3408C & 3412C MARINE ENGINES
Governor
3408C & 3412C MARINE ENGINES
Governor
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing And Governor
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly{1365}
1990/07/30
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/10
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

Caterpillar Parts SIS Catalog 3408 :

GOVERNOR GP
8N-6951 GOVERNOR GP
GOVERNOR GP-WOODWARD
6N-9735 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
6N-9732 GOVERNOR GP-WOODWARD
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
CONVERSION GP-WOODWARD GOV
8N-3104 CONVERSION GP-WOODWARD GOV
GOVERNOR GP
1W-1637 GOVERNOR GP
GOVERNOR GP
8N-6951 GOVERNOR GP
GOVERNOR GP
1W-1637 GOVERNOR GP
GOVERNOR GP
4W-6811 GOVERNOR GP
GOVERNOR GP
8N-6775 GOVERNOR GP
GOVERNOR GP
1W-1636 GOVERNOR GP
SWITCH GP
8N-1635 SWITCH GP
SWITCH GP-WOODWARD GOVERNOR
8N-6670 SWITCH GP-WOODWARD GOVERNOR

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.