BASIC ENGINE
CYLINDER HEAD GPBASIC ENGINE
CYLINDER HEAD GP#SEBP10980050
143-0047: CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@143-0046@@@@@
FIELD REPLACEMENT FOR @@@@@143-0046@@@@@
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS#SEBP10980051
1W-5960: CYLINDER HEAD AS
1W-5960 CYLINDER HEAD AS
S/N 60M2238-2287
PART OF 1W-5961, 7N-0848 CYLINDER HEAD AS, 1W-5959 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7N-0848@@@@@
S/N 60M2238-2287
PART OF 1W-5961, 7N-0848 CYLINDER HEAD AS, 1W-5959 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7N-0848@@@@@
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4N-5893 | [12] | INSERT-VALVE SEAT (INLET) | |
7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
2. | 1W-5283 | [12] | INSERT-VALVE SEAT (EXHAUST) | |
7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
3. | 3B-0623 | [12] | PLUG-CUP | |
4. | 3B-0645 | [10] | PLUG-CUP | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED |
#SEBP10980052
1W-5960: CYLINDER HEAD AS
1W-5960 CYLINDER HEAD AS
S/N 60M2288-2572
PART OF 1W-5961, 7N-0848 CYLINDER HEAD AS, 1W-5959 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7N-0848@@@@@
S/N 60M2288-2572
PART OF 1W-5961, 7N-0848 CYLINDER HEAD AS, 1W-5959 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7N-0848@@@@@
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4N-5893 | [12] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
2. | 1W-5283 C | [12] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
3. | 3B-0623 | [12] | PLUG-CUP | |
4. | 3B-0645 | [10] | PLUG-CUP | |
5. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE |
#SEBP10980053
1W-5961: CYLINDER HEAD AS
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS#SEBP10980054
7N-0848: CYLINDER HEAD AS
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS#SEBP10980055
7W-2225: CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS
S/N 60M3778-5160
PART OF 4P-9351, 5N-9004 KIT-ENGINE PARTS
AN ATTACHMENT
S/N 60M3778-5160
PART OF 4P-9351, 5N-9004 KIT-ENGINE PARTS
AN ATTACHMENT
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS#SEBP10980056
7W-2241: CYLINDER HEAD AS
7W-2241 CYLINDER HEAD AS
S/N 60M2477-5159
PART OF 7W-2243 CYLINDER HEAD AS, 7W-2242 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2243@@@@@
ALSO AN ATTACHMENT
S/N 60M2477-5159
PART OF 7W-2243 CYLINDER HEAD AS, 7W-2242 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2243@@@@@
ALSO AN ATTACHMENT
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3B-0645 | [10] | PLUG-CUP | |
2. | 4N-5893 | [12] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
3. | 1W-5283 | [12] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
4. | 3B-0623 | [12] | PLUG-CUP | |
5. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED |
#SEBP10980057
7W-2243: CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
S/N 60M1-5159
PART OF 4P-9353, 4P-9354, 4P-9355, 4P-9356, 5N-1715, 5N-8530, 7C-3431 KIT-ENGINE PARTS
FIELD REPLACEMENT FOR @@@@@ 7W-2241@@@@@
AN ATTACHMENT AND FIELD INSTALLATION
S/N 60M1-5159
PART OF 4P-9353, 4P-9354, 4P-9355, 4P-9356, 5N-1715, 5N-8530, 7C-3431 KIT-ENGINE PARTS
FIELD REPLACEMENT FOR @@@@@ 7W-2241@@@@@
AN ATTACHMENT AND FIELD INSTALLATION
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS#SEBP10980058
7W-2243: CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
S/N 60M5160-5160
PART OF 7W-2242 CYLINDER HEAD GP, 131-6602, 131-6603, 4P-9353, 4P-9354, 4P-9355, 4P-9356, 5N-1715, 5N-8530, 5N-9578, 7C-3431 KIT-ENGINE PARTS
FIELD REPLACEMENT FOR @@@@@ 7W-2241@@@@@
ALSO AN ATTACHMENT AND FIELD INSTALLATION
S/N 60M5160-5160
PART OF 7W-2242 CYLINDER HEAD GP, 131-6602, 131-6603, 4P-9353, 4P-9354, 4P-9355, 4P-9356, 5N-1715, 5N-8530, 5N-9578, 7C-3431 KIT-ENGINE PARTS
FIELD REPLACEMENT FOR @@@@@ 7W-2241@@@@@
ALSO AN ATTACHMENT AND FIELD INSTALLATION
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SIS#SEBP10980059
1W-5958: CYLINDER HEAD GP
1W-5958 CYLINDER HEAD GP
S/N 60M2238-2261
S/N 60M2238-2261
Parts for your 3412 MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-9757 | [12] | ADAPTER AS | |
2. | 2S-2251 | [12] | SEAL-O-RING | |
3. | 4N-7253 | [12] | GASKET-CHAMBER | |
4. | 5M-6214 | [2] | PLUG (1/8-27 PTF) | |
5. | 1W-5959 Y | [2] | CYLINDER HEAD GP | |
6. | 0L-1352 | [19] | BOLT (3/8-16X3.25-IN) | |
7. | 3J-5390 | [2] | PLUG (3/8-18-THD) | |
8. | 3J-5389 | [2] | PLUG (EXTERNAL) | |
9. | 1B-5174 | [2] | PLUG-PIPE | |
10. | 4S-6137 | [24] | STUD-TAPERLOCK (3/8-16X3.1-IN) | |
11. | 2W-7985 | [2] | GASKET-CYLINDER HEAD | |
12. | 2H-3750 | [40] | BOLT (3/4-16X7.5-IN) | |
5H-1504 | [40] | WASHER-HARD (20X33.5X5-MM THK) | ||
13. | 4W-1055 | [48] | SEAL | |
14. | 5P-0063 J | [4] | PLUG-CUP | |
15. | 4N-0932 | [2] | PLUG-CUP | |
16. | 1A-5183 | [2] | BOLT (3/8-16X4.75-IN) | |
17. | 5M-2894 | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
18. | 5B-2638 | [2] | BOLT (3/8-16X5.25-IN) | |
19. | 6N-6733 | [1] | SUPPORT-HOUSING (LH) | |
20. | 6N-6734 | [1] | SUPPORT-HOUSING (RH) | |
21. | 2B-0858 | [2] | PLUG-PIPE | |
22. | 8S-9191 | [3] | BOLT (3/8-16X4-IN) | |
23. | 9N-2583 | [1] | BRACKET-FUEL PUMP | |
24. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
25. | 1W-5207 J | [1] | BRACKET-FUEL PUMP (NOT USED W/WATER-COOL MANIFOLD) | |
J | ||||
Y | SEPARATE ILLUSTRATION |
Information:
BASIC ENGINE
CYLINDER HEAD GP
Engine News
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/04/07
1982/04/07
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
1982/10/20
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
1985/03/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
1990/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
1977/05/25
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
2013/05/13
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Service Letter-APD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Disassembly and Assembly
Service Magazine
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
1986/09/08
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
1977/08/22
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed{0644,1100}
1978/06/19
1978/06/19
Caterpillar Parts SIS Catalog 3412 :
Truck sale:
95,720
96,795
93,569
60,000
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
159,600
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY