AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-5958 CYLINDER HEAD GP S/N 60M2262-2572 3412 MARINE ENGINE


BASIC ENGINE
CYLINDER HEAD GP

MARINE ENGINE 3412 MARINE ENGINE 60M
 3412B Marine Engine 60M00001-05160 SEBP1098 3412 60M   (1976)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD GP
1W-5958 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-5958 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-5959 CYLINDER HEAD GP
CYLINDER HEAD GP
2W-5746 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2622 CYLINDER HEAD GP
 

#SEBP10980060
 

1W-5958: CYLINDER HEAD GP

1W-5958 CYLINDER HEAD GP
S/N 60M2262-2572
i00352657 SEBP1098
1W5958 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5733 C [12] ADAPTER AS-VALVE  
2. 2S-2251 [12] SEAL-O-RING  
3. 1W-8895 C [12] GASKET  
4. 5M-6214 [2] PLUG (1/8-27 PTF)  
5. 1W-5959 Y [2] CYLINDER HEAD GP  
6. 0L-1352 [19] BOLT (3/8-16X3.25-IN)  
7. 3J-5390 [2] PLUG (3/8-18-THD)  
8. 3J-5389 [2] PLUG (EXTERNAL)  
9. 1B-5174 [2] PLUG-PIPE  
10. 4S-6137 [24] STUD-TAPERLOCK (3/8-16X3.1-IN)  
11. 2W-7985 [2] GASKET-CYLINDER HEAD  
12. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
13. 4W-1055 [48] SEAL  
14. 5P-0063 J [4] PLUG-CUP  
15. 4N-0932 [2] PLUG-CUP  
16. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
17. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
19. 6N-6733 [1] SUPPORT-HOUSING (LH)  
20. 6N-6734 [1] SUPPORT-HOUSING (RH)  
21. 2B-0858 [2] PLUG-PIPE  
22. 8S-9191 [3] BOLT (3/8-16X4-IN)  
23. 9N-2583 [1] BRACKET-FUEL PUMP  
24. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
25. 1W-5207 [1] BRACKET-FUEL PUMP  
  C   CHANGE FROM PREVIOUS TYPE
  J   NOT USED W/WATER-COOL MANIFOLD
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980061
 

1W-5959: CYLINDER HEAD GP

1W-5959 CYLINDER HEAD GP
S/N 60M2238-2572
PART OF 1W-5958, 4N-2622 CYLINDER HEAD GP
i00108605 SEBP1098
1W5959 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5906 [24] SPRING-VALVE  
2. 7N-4580 [12] VALVE-EXHAUST  
3. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
4. 6N-7174 [1] SHIELD-OIL  
5. 2A-4429 [48] LOCK-RETAINER  
6. 2N-5775 [12] DOWEL  
7. 4N-5654 [12] VALVE-INLET  
8. 4N-2803 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
9. 1W-5960 Y [1] CYLINDER HEAD AS  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980062
 

2W-5746: CYLINDER HEAD GP

2W-5746 CYLINDER HEAD GP
S/N 60M2082-2129
PART OF 4N-2622 CYLINDER HEAD GP
i00108627 SEBP1098
2W5746 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5906 [24] SPRING-VALVE  
2. 1W-3860 [12] VALVE-EXHAUST  
3. 2A-4429 [48] LOCK-RETAINER  
4. 7N-0848 [1] CYLINDER HEAD AS  
5. 4N-5893 [12] INSERT-VALVE SEAT (INLET)  
  4S-8898 J [12] INSERT (0.13-MM OS)(.13MM)  
  4S-8899 J [12] INSERT (0.26-MM OS)(.26MM)  
6. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)  
  4S-8902 J [12] INSERT (0.13-MM OS)(.13MM)  
  4S-8903 J [12] INSERT (0.26-MM OS)(.26MM)  
7. 3B-0623 [12] PLUG-CUP  
8. 4N-2803 [24] GUIDE-VALVE  
9. 2N-5775 [12] DOWEL  
10. 3B-0645 [10] PLUG-CUP  
11. 1W-3859 [12] VALVE-INLET  
12. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
13. 6N-7174 C [1] SHIELD-OIL  
  C   CHANGE FROM PREVIOUS TYPE
  J   NOT PART OF 7N0848 AS
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP10980063
 

4N-2622: CYLINDER HEAD GP

4N-2622 CYLINDER HEAD GP
S/N 60M1-2081
i00108671 SEBP1098
4N2622 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9757 C [12] ADAPTER AS  
2. 2S-2251 [12] SEAL-O-RING  
3. 4N-7253 [12] GASKET-CHAMBER  
4. 5M-6214 [2] PLUG (1/8-27 PTF)  
5. 7N-0847 CY [2] CYLINDER HEAD GP  
6. 0L-1352 [19] BOLT (3/8-16X3.25-IN)  
7. 3J-5390 [2] PLUG (3/8-18-THD)  
8. 3J-5389 [2] PLUG (EXTERNAL)  
9. 1B-5174 [2] PLUG-PIPE  
10. 4S-6137 [24] STUD-TAPERLOCK (3/8-16X3.1-IN)  
11. 2W-7985 C [2] GASKET-CYLINDER HEAD  
12. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
13. 4N-2269 [48] SEAL  
14. 5P-0063 J [4] PLUG-CUP  
15. 4N-0932 [2] PLUG-CUP  
16. 1A-5183 C [2] BOLT (3/8-16X4.75-IN)  
17. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
19. 6N-6733 C [1] SUPPORT-HOUSING (LH)  
20. 6N-6734 C [1] SUPPORT-HOUSING (RH)  
21. 2B-0858 [2] PLUG-PIPE  
22. 8S-9191 [3] BOLT (3/8-16X4-IN)  
23. 9N-2583 [1] BRACKET-FUEL PUMP  
24. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
25. 1W-5207 C [1] BRACKET-FUEL PUMP  
  C   CHANGE FROM PREVIOUS TYPE
  J   NOT USED WITH WATER COOLED MANIFOLDS
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980064
 

4N-2622: CYLINDER HEAD GP

4N-2622 CYLINDER HEAD GP
S/N 60M2082-2129
i00108672 SEBP1098
4N2622 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9757 [12] ADAPTER AS  
2. 2S-2251 [12] SEAL-O-RING  
3. 4N-7253 [12] GASKET-CHAMBER  
4. 5M-6214 [2] PLUG (1/8-27 PTF)  
5. 2W-5746 CY [2] CYLINDER HEAD GP  
6. 0L-1352 [19] BOLT (3/8-16X3.25-IN)  
7. 3J-5390 [2] PLUG (3/8-18-THD)  
8. 3J-5389 [2] PLUG (EXTERNAL)  
9. 1B-5174 [2] PLUG-PIPE  
10. 4S-6137 [24] STUD-TAPERLOCK (3/8-16X3.1-IN)  
11. 2W-7985 [2] GASKET-CYLINDER HEAD  
12. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
13. 4N-2269 [48] SEAL  
14. 5P-0063 J [4] PLUG-CUP  
15. 4N-0932 [2] PLUG-CUP  
16. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
17. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
19. 6N-6733 [1] SUPPORT-HOUSING (LH)  
20. 6N-6734 [1] SUPPORT-HOUSING (RH)  
21. 2B-0858 [2] PLUG-PIPE  
22. 8S-9191 [3] BOLT (3/8-16X4-IN)  
23. 9N-2583 [1] BRACKET-FUEL PUMP  
24. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
25. 1W-5207 [1] BRACKET-FUEL PUMP  
  C   CHANGE FROM PREVIOUS TYPE
  J   NOT USED WITH WATER COOLED MANIFOLDS
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980065
 

4N-2622: CYLINDER HEAD GP

4N-2622 CYLINDER HEAD GP
S/N 60M2130-2251
i00108673 SEBP1098
4N2622 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-7885 [12] ADAPTER AS-FUEL VALVE  
2. 2S-2251 [12] SEAL-O-RING  
3. 4N-7253 [12] GASKET-CHAMBER  
4. 5M-6214 [2] PLUG (1/8-27 PTF)  
5. 7N-0847 CY [2] CYLINDER HEAD GP  
6. 0L-1352 [19] BOLT (3/8-16X3.25-IN)  
7. 3J-5390 [2] PLUG (3/8-18-THD)  
8. 3J-5389 [2] PLUG (EXTERNAL)  
9. 1B-5174 [2] PLUG-PIPE  
10. 4S-6137 [24] STUD-TAPERLOCK (3/8-16X3.1-IN)  
11. 2W-7985 [2] GASKET-CYLINDER HEAD  
12. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
13. 4N-2269 [48] SEAL  
14. 5P-0063 J [4] PLUG-CUP  
15. 4N-0932 [2] PLUG-CUP  
16. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
17. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
19. 6N-6733 [1] SUPPORT-HOUSING (LH)  
20. 6N-6734 [1] SUPPORT-HOUSING (RH)  
21. 2B-0858 [2] PLUG-PIPE  
22. 8S-9191 [3] BOLT (3/8-16X4-IN)  
23. 9N-2583 [1] BRACKET-FUEL PUMP  
24. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
25. 1W-5207 [1] BRACKET-FUEL PUMP  
  C   CHANGE FROM PREVIOUS TYPE
  J   NOT USED WITH WATER COOLED MANIFOLDS
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980066
 

4N-2622: CYLINDER HEAD GP

4N-2622 CYLINDER HEAD GP
S/N 60M2252-5160
i00108674 SEBP1098
4N2622 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5733 C [12] ADAPTER AS-VALVE  
2. 2S-2251 [12] SEAL-O-RING  
3. 1W-8895 [12] GASKET  
4. 5M-6214 [2] PLUG (1/8-27 PTF)  
5. 1W-5959 Y [2] CYLINDER HEAD GP  
6. 0L-1352 [19] BOLT (3/8-16X3.25-IN)  
7. 3J-5390 [2] PLUG (3/8-18-THD)  
8. 3J-5389 [2] PLUG (EXTERNAL)  
9. 1B-5174 [2] PLUG-PIPE  
10. 4S-6137 [24] STUD-TAPERLOCK (3/8-16X3.1-IN)  
11. 2W-7985 [2] GASKET-CYLINDER HEAD  
12. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
13. 4W-1055 C [48] SEAL  
14. 5P-0063 J [4] PLUG-CUP  
15. 4N-0932 [2] PLUG-CUP  
16. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
17. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
19. 6N-6733 [1] SUPPORT-HOUSING (LH)  
20. 6N-6734 [1] SUPPORT-HOUSING (RH)  
21. 2B-0858 [2] PLUG-PIPE  
22. 8S-9191 [3] BOLT (3/8-16X4-IN)  
23. 9N-2583 [1] BRACKET-FUEL PUMP  
24. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
25. 1W-5207 [1] BRACKET-FUEL PUMP  
  C   CHANGE FROM PREVIOUS TYPE
  J   NOT USED WITH WATER COOLED MANIFOLDS
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980067
 

4N-2623: CYLINDER HEAD GP

4N-2623 CYLINDER HEAD GP
S/N 60M1-1914
i00971610 SEBP1098
4N2623 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3714 [12] CHAMBER AS  
2. 2S-2251 [12] SEAL-O-RING  
3. 4N-7253 [12] GASKET-CHAMBER  
4. 5M-6214 [2] PLUG (1/8-27 PTF)  
5. 7N-0847 CY [2] CYLINDER HEAD GP  
6. 0L-1352 [19] BOLT (3/8-16X3.25-IN)  
7. 3J-5390 [2] PLUG (3/8-18-THD)  
8. 3J-5389 [2] PLUG (EXTERNAL)  
9. 1B-5174 [2] PLUG-PIPE  
10. 4S-6137 [24] STUD-TAPERLOCK (3/8-16X3.1-IN)  
11. 4N-2578 [2] GASKET-CYLINDER HEAD  
12. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
13. 4N-2269 [48] SEAL  
14. 5P-0063 [4] PLUG-CUP  
15. 4N-0932 [2] PLUG-CUP  
16. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
17. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
19. 6N-6733 [1] SUPPORT-HOUSING (LH)  
20. 6N-6734 [1] SUPPORT-HOUSING (RH)  
21. 2B-0858 [2] PLUG-PIPE  
22. 9N-2583 [1] BRACKET-FUEL PUMP  
23. 8S-9191 [3] BOLT (3/8-16X4-IN)  
24. 9N-2607 [1] BRACKET-FUEL PUMP  
25. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980068
 

4W-7007: CYLINDER HEAD GP

4W-7007 CYLINDER HEAD GP
S/N 60M2477-2603
i00108701 SEBP1098
4W7007 CYLINDER HEAD GP Parts scheme 4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2583 [1] BRACKET-FUEL PUMP  
2. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8S-9191 [1] BOLT (3/8-16X4-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING (LH)  
8. 2W-7985 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 [40] BOLT (3/4-16X7.5-IN)  
10. 5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
11. 7W-2242 Y [2] CYLINDER HEAD GP  
12. 0L-1352 [11] BOLT (3/8-16X3.25-IN)  
13. 4N-0932 B [2] PLUG-CUP  
14. 5P-0063 B [4] PLUG-CUP  
15. 3J-5390 [2] PLUG (3/8-18-THD)  
16. 4W-1055 [48] SEAL  
17. 6V-5699 [24] STUD-TAPERLOCK  
18. 1B-5174 [2] PLUG-PIPE  
19. 2B-0858 [2] PLUG-PIPE  
20. 3J-5389 [2] PLUG (EXTERNAL)  
21. 5M-6214 B [2] PLUG (1/8-27 PTF)  
22. 6N-6734 [1] SUPPORT-HOUSING (RH)  
23. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
24. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
25. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
27. 8S-9191 [2] BOLT (3/8-16X4-IN)  
28. 1W-5207 [1] BRACKET-FUEL PUMP  
29. 5H-7153 C [12] SEAL-O-RING  
30. 7W-1645 C [12] ADAPTER  
31. 4N-7253 C [12] GASKET-CHAMBER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980069
 

4W-7007: CYLINDER HEAD GP

4W-7007 CYLINDER HEAD GP
S/N 60M5029-5160
i00108703 SEBP1098
4W7007 CYLINDER HEAD GP Parts scheme 4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 C [1] BRACKET-FUEL PUMP  
2. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 C [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING (LH)  
8. 7E-7312 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 C [40] BOLT (3/4-16X7.5-IN)  
10. 5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
11. 7W-2242 Y [2] CYLINDER HEAD GP  
12. 0L-1352 C [14] BOLT (3/8-16X3.25-IN)  
13. 0L-1352 CB [5] BOLT (3/8-16X3.25-IN)  
14. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
15. 4N-0932 [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 4N-7253 C [12] GASKET-CHAMBER  
18. 3E-6772 C [48] SEAL (WATER)  
19. 106-1792 C [24] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 C [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 C [5] PLUG-PIPE (1/2-14-THD)  
22. 8T-6762 CB [1] PLUG-PIPE (1/2-14-THD)  
23. 8T-6764 CB [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6734 [1] SUPPORT-HOUSING (RH)  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 8M-5249 C [12] SEAL-O-RING  
32. 100-6920 C [12] ADAPTER-NOZZLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Tool Makes Glow Plug Wire Removal Easier
1981/05/20
Service Manual Information About Inside Diameters Of Valve Guides
1981/10/21
New Fuel Nozzle Adapter Assembly Used
1982/02/24
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/04/07
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Improved Inlet And Exhaust Valves
1982/09/22
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
New Head Gasket Improves Seal Between Block And Liner Flange
1982/10/20
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
New Fuel Nozzle Adapters Used
1983/05/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New Inlet Valves Used In Cylinder Heads
1984/09/12
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
New Cylinder Heads And Fuel Nozzle Adapters Used
1985/07/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/08/01
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System
1985/11/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Change To Interval For Valve Lash Adjustment
1987/02/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed
1988/11/01
Improved Head Gasket Used; Service Tips
1990/03/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
Dimensions For Aluminum Washer
1990/08/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems {1105}
1994/09/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Improved Exhaust Valve Now Available
1977/03/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Remanufactured 3412 Crankshafts {1100}
2000/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Valves, Valve Springs And Valve Seat Inserts
3412 INDUSTRIAL AND MARINE ENGINES
Cylinder Heads
3412 INDUSTRIAL AND MARINE ENGINES
Cylinder Head Valves
3408C and 3412C Marine Engines
Cylinder Head
3408C and 3412C Marine Engines
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Service Letter-APD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Disassembly and Assembly
Glow Plugs (Precombustion Chambers)
3408C & 3412C MARINE ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C MARINE ENGINES
Precombustion Chambers
3408C & 3412C MARINE ENGINES
Direct Injection Adapters
3408C & 3412C MARINE ENGINES
Cylinder Head Assemblies
3408C & 3412C MARINE ENGINES
Valves
3408C & 3412C MARINE ENGINES
Valve Seat Inserts
3408C & 3412C MARINE ENGINES
Valve Guides
3408C & 3412C MARINE ENGINES
Bridge Dowels
3408C & 3412C MARINE ENGINES
Glow Plugs (Precombustion Chambers)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles & Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES
Precombustion Chambers
3412 INDUSTRIAL & MARINE ENGINES
Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES
Cylinder Head Assemblies
3412 INDUSTRIAL & MARINE ENGINES
Valves
3412 INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3412 INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The Correct Water Temperature Contactor{1350,1100}
1980/02/11
Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}
1981/10/05
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Improved Inlet And Exhaust Valves{1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New Inlet Valve Used{1105}
1984/09/03
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System {1100,1102,1350}
1985/10/21
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Improved Exhaust Valve Now Available{1105}
1977/02/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Change To Interval For Valve Lash Adjustment{1103,1105,1123}
1987/02/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed{0644,1100}
1978/06/19
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07

Caterpillar Parts SIS Catalog 3412 :

CYLINDER HEAD GP
1W-5958 CYLINDER HEAD GP
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2241 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS
CYLINDER HEAD AS
7N-0848 CYLINDER HEAD AS
CYLINDER HEAD AS
1W-5961 CYLINDER HEAD AS
CYLINDER HEAD AS
1W-5960 CYLINDER HEAD AS
CYLINDER HEAD GP
1W-5959 CYLINDER HEAD GP
CYLINDER HEAD GP
2W-5746 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2622 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2622 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2622 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2622 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2623 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.