437-4600 KIT-ENGINE GASKET 196.9 X 298.5 X 25.4 MM. CLASSIC PART. WATER LINES GROUP FIELD INSTALLATION 3412

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)


			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP10980113

438-0142: KIT-ENGINE GASKET

KIT-ENGINE GASKET

438-0142 KIT-ENGINE GASKET
FIELD INSTALLATION

i06831019 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)


			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP10980114

452-9977: KIT-ENGINE GASKET

KIT-ENGINE GASKET

452-9977 KIT-ENGINE GASKET
KIT CONTAINS GASKET, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS.. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD REPLACEMENT ORDER @@@@@460-4768@@@@@
FIELD INSTALLATION

i05850764 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
4H-9541	[1]	GASKET
4N-0933	[1]	GASKET
4N-1684	[1]	GASKET
4N-4307	[1]	GASKET
7C-0307	[8]	GASKET
7M-7273	[1]	GASKET
9F-7450	[1]	GASKET
9L-6924	[2]	GASKET
4N-7253	[6]	GASKET-CHAMBER
225-3099	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
225-3101	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
4N-1918	[2]	GASKET-WOUND
8M-2296	[4]	NUT-FULL (3/8-16-THD)
5P-5678	[7]	SEAL
359-1439	[24]	SEAL AS-WATER
126-2702	[1]	SEAL-INTEGRAL
198-6068	[1]	SEAL-INTEGRAL
3S-9643	[2]	SEAL-LIP TYPE (REGULATOR HOUSING)
3D-2824	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
5P-8119	[6]	SEAL-O-RING
5P-8356	[2]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
7L-4774	[6]	SEAL-O-RING
109-0072	[5]	SEAL-O-RING
109-0076	[4]	SEAL-O-RING
109-0078	[5]	SEAL-O-RING
112-3258	[2]	SEAL-O-RING
112-3540	[1]	SEAL-O-RING
114-4427	[1]	SEAL-O-RING
272-2583	[3]	SEAL-O-RING
6L-8562	[4]	STUD-TAPERLOCK (3/8-16X1.77-IN)
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP10980115

452-9987: KIT-ENGINE GASKET

KIT-ENGINE GASKET

452-9987 KIT-ENGINE GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FIELD INSTALLATION

i05851013 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
2A-1162	[4]	GASKET
2M-5446	[1]	GASKET
4N-0933	[2]	GASKET
4W-6382	[1]	GASKET
7W-5648	[2]	GASKET
9Y-6089	[1]	GASKET
161-7293	[1]	GASKET-CYLINDER
142-5868	[1]	SEAL-CRANKSHAFT (REAR)(REAR)
125-9794	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP10980116

454-4763: KIT-ENGINE GASKET

KIT-ENGINE GASKET

454-4763 KIT-ENGINE GASKET
KIT INCLUDES GASKETS, SEALS, BENDABLE LOCKS TO REINSTALL THE FRONT COVER. DOES NOT INCLUDE OIL PAN GASKET
PART OF 460-9351 KIT-ENGINE OVERHAUL

i05878504 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
6N-2508	[1]	GASKET
7C-0307	[4]	GASKET
193-9155	[1]	GASKET
166-9145	[1]	GASKET-CYLINDER BLOCK
142-5867	[1]	SEAL-CRANKSHAFT (FRONT)
234-8937	[1]	SEAL-INTEGRAL
6V-4314	[1]	SEAL-O-RING
9X-7371	[1]	SEAL-O-RING
112-1579	[1]	SEAL-O-RING
112-1580	[1]	SEAL-O-RING
125-9794	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED TO THE KIT CONSIST, PLEASE VISIT:

		HTTP://DEALER.CAT/RELATED

#SEBP10980117

460-4768: KIT-ENGINE GASKET

KIT-ENGINE GASKET

460-4768 KIT-ENGINE GASKET
CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. ALSO INCLUDES TURBO GASKETS,. BUT DOES NOT INCLUDE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT AS NEEDED.. TURBO MOUNTING HARDWARE WILL INCLUDE: BOLTS, NUTS, STUDS, WASHERS,AND SPACERS.
PART OF 460-9351, 460-9353 KIT-ENGINE OVERHAUL
FIELD REPLACEMENT FOR @@@@@452-9977@@@@@
FOR USE WITH 4-6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.
FIELD INSTALLATION

i05878505 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
4N-1684	[1]	GASKET
7C-0307	[1]	GASKET
4N-7253	[6]	GASKET-CHAMBER
225-3099	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
225-3101	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
4N-1918	[1]	GASKET-WOUND
5P-5678 D		SEAL (7-M)
359-1439	[24]	SEAL AS-WATER
3S-9643	[2]	SEAL-LIP TYPE
109-0072	[1]	SEAL-O-RING
109-0073	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
5P-8119	[6]	SEAL-O-RING
5P-8356	[2]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
7L-4774	[6]	SEAL-O-RING
464-0509	[6]	SEAL-O-RING
109-0076	[4]	SEAL-O-RING
109-0078	[2]	SEAL-O-RING
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT:

		HTTP://DEALER.CAT/RELATED
D		ORDER BY THE METER

#SEBP10980118

460-5277: KIT-ENGINE GASKET

KIT-ENGINE GASKET

460-5277 KIT-ENGINE GASKET
INCLUDES GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP AND BLOCK COVERS.
PART OF 460-9351 KIT-ENGINE OVERHAUL
FIELD INSTALLATION

i05876317 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
2P-3760	[1]	GASKET
2P-4305	[4]	GASKET
4N-4307	[1]	GASKET
343-8888	[1]	GASKET
353-1648	[1]	GASKET-OIL PAN
4N-2630	[4]	GASKET-SIDE COVER
239-5572	[5]	SEAL-INTEGRAL
5P-8356	[4]	SEAL-O-RING
6V-5048	[1]	SEAL-O-RING
8J-4351	[1]	SEAL-O-RING
109-0076	[3]	SEAL-O-RING
109-0078	[1]	SEAL-O-RING
114-4427	[9]	SEAL-O-RING
118-5068	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT:

		HTTP://DEALER.CAT.COM/RELATED

#SEBP10980119

460-5299: KIT-ENGINE GASKET

KIT-ENGINE GASKET

460-5299 KIT-ENGINE GASKET
CONTAINS GASKETS AND SEALS TO REINSTALL TURBOS AND ATTACHED LINES. THE TURBO MOUNTING HARDWARE INCLUDES BOLTS, NUTS,. STUDS, WASHERS AND SPACERS.
PART OF 460-9353 KIT-ENGINE OVERHAUL
FIELD INSTALLATION

i05878601 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
4H-9541	[1]	GASKET
7M-7273	[1]	GASKET
9L-6924	[1]	GASKET
245-8342	[1]	GASKET
8M-2296	[4]	NUT-FULL (3/8-16-THD)
126-2702	[1]	SEAL-INTEGRAL
198-6068	[1]	SEAL-INTEGRAL
3D-2824	[1]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
112-3540	[1]	SEAL-O-RING
6L-8562	[4]	STUD-TAPERLOCK (3/8-16X1.77-IN)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT:

		HTTP://DEALER.CAT.COM/RELATED

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Engine Replacement
1982/04/07

Reference Chart for Engine Improvements
1982/11/10

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26

Dynamometer Testing of Electronic Engines{1000}
1995/10/01

New Engine Information Plates Require More Information{1000}
1996/02/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18

New Engine News Format {0374}
1999/12/01

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

Responsibilities for Emission Certified Engines {1000}
2005/10/03

How Is Service Information Accessed / Used {1000}
2009/04/27

Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}

Concerns for Engines with Seawater Cooling in Oil Polluted Water {1000, 1394}
2010/06/17

Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
2010/10/18

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Alignment Of Caterpillar Marine Transmissions And Marine Engines{1000, 3300}
Alignment Of Caterpillar Marine Transmissions And Marine Engines{1000, 3300}

Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Sea Trial Measurements On Caterpillar Marine Engines{1000, 3300}
Sea Trial Measurements On Caterpillar Marine Engines{1000, 3300}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
3412 INDUSTRIAL AND MARINE ENGINES

Engine Design
3408C and 3412C Marine Engines

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}

Service Letter-China

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS
REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30

New Bearing Used In Air Starting Motor {1451}
1982/09/13

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/22

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 3412 :

437-2001 KIT-ENGINE GASKET

419-8267 KIT-ENGINE GASKET

219-6544 KIT-ENGINE GASKET

442-5359 KIT-CYLINDER PACK

460-8246 KIT-CYLINDER HEAD REPAIR

419-8601 KIT-CYLINDER HEAD GASKET

243-6718 KIT-CRANKSHAFT BEARING

4N-5226 HOUSING GP-FRONT

437-8115 KIT-ENGINE GASKET

438-0128 KIT-ENGINE GASKET

438-0142 KIT-ENGINE GASKET

452-9977 KIT-ENGINE GASKET

452-9987 KIT-ENGINE GASKET

454-4763 KIT-ENGINE GASKET

460-4768 KIT-ENGINE GASKET

460-5277 KIT-ENGINE GASKET

Truck sale:

95,720

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

96,795

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

93,569

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

60,000

Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

159,600

Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY