419-8233 KIT-ENGINE OVERHAUL MAJOR OVERHAUL KIT FIELD REPLACEMENT ORDER @@@@@436-3145@@@@@ FOR USE WITH @@@@@ 4W-3920@@@@@, @@@@@ 4N-2247@@@@@, @@@@@ 7W-7584@@@@@, @@@@@124-3400@@@@@, @@@@@ 1W-0733@@@@@, REHS7921 FIELD INSTALLATION 3412

419-8233 KIT-ENGINE OVERHAUL
MAJOR OVERHAUL KIT
FIELD REPLACEMENT ORDER @@@@@436-3145@@@@@
FOR USE WITH @@@@@ 4W-3920@@@@@, @@@@@ 4N-2247@@@@@, @@@@@ 7W-7584@@@@@, @@@@@124-3400@@@@@, @@@@@ 1W-0733@@@@@, REHS7921
FIELD INSTALLATION

i05211800 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
419-8601 Y	[2]	KIT-CYLINDER HEAD GASKET
6V-0237 Y	[1]	KIT-GASKET (EXP TANK OR HEAT EXCHANGER)
160-9874 Y	[12]	KIT-GASKET (SINGLE CYLINDER LINER)
219-6544 Y	[1]	KIT-ENGINE GASKET (AFTERCOOLER, LINES)
234-1630 Y	[1]	KIT-GASKET (REAR STRUCTURE)
281-0029 Y	[12]	KIT-GASKET (SINGLE FUEL INJECTOR SEALS)
419-5116 Y	[1]	KIT-GASKET (FRONT STRUCTURE)
420-0925 Y	[1]	KIT-GASKET (CENTRAL, LOWER)
421-1305 Y	[1]	KIT-GASKET (FUEL SYSTEM)
421-8976 Y	[1]	KIT-GASKET (OIL COOLER, LINES)

328-5574	[12]	BEARING-CONNECTING ROD (STANDARD)
2B-2695	[4]	BOLT (5/16-18X0.875-IN)
3B-1915	[2]	BOLT (3/8-16X1.375-IN)
3G-2292	[5]	BOLT-LOCKING (3/8-16X0.87-IN)
9Y-2988	[1]	BREATHER AS (CRANKCASE)
4N-0685	[5]	BUSHING (1-IN WIDE)
379-0191	[1]	BUSHING
4N-6658	[2]	BUSHING (1.3-IN WIDE)
373-1885	[1]	BUSHING
6N-0977	[1]	BUSHING
417-4524	[1]	BUSHING
2N-8109	[1]	CLAMP
7W-0316	[2]	CLAMP
8N-9758	[2]	CLAMP
7X-7958	[2]	CLAMP-HOSE
4M-1336	[1]	FERRULE
1R-1808	[2]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0749	[2]	FILTER-FUEL (ADVANCED EFFICIENCY)
4H-9541	[1]	GASKET
245-8342	[1]	GASKET
2K-4973	[1]	LOCKNUT (3/8-16-THD)
2N-2766	[24]	LOCKNUT (3/8-16-THD)
8M-2296	[4]	NUT-FULL (3/8-16-THD)
5H-8985	[1]	PIN-SPRING
6N-2176	[1]	PIPE
6N-1027	[1]	PLATE-THRUST
112-9217	[1]	PLATE-THRUST
5F-0304	[2]	PLUG
4N-0932	[2]	PLUG-CUP
5P-0063	[4]	PLUG-CUP
111-2721	[1]	PLUG-FELT
9S-4190	[8]	PLUG-O-RING (7/8-14-THD)
7W-6492	[2]	PLUG-PIPE (1/2-14-THD)
7W-6534	[6]	PLUG-PIPE
8T-6757	[6]	PLUG-PIPE
8T-6763	[4]	PLUG-PIPE (1/4-18-THD)
8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
392-9208	[2]	PLUNGER-VALVE (RELIEF)
248-5513	[2]	REGULATOR-TEMPERATURE (92-DEG C)
3D-2824	[1]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
8F-4994	[1]	SEAL-O-RING
2F-4967	[2]	SPACER (10.5X19X5.512-MM THK)
114-9224	[24]	SPACER (11.13X19.05X47-MM THK)
4N-6143	[1]	SPACER-SPECIAL
4N-8150	[2]	SPRING
305-6843	[24]	SPRING-GUIDE
6K-0806	[6]	STRAP-CABLE
0L-0659	[6]	STUD
4F-9081	[1]	STUD
7C-7407	[1]	STUD
2P-4304	[1]	STUD-HOLLOW
2P-1974	[3]	STUD-TAPERLOCK (3/8-16X4.2-IN)
3K-3256	[2]	STUD-TAPERLOCK (3/8-16X1.7-IN)
3M-0496	[1]	STUD-TAPERLOCK (3/8-16X2.6-IN)
6L-4428	[1]	STUD-TAPERLOCK (3/8-16X4.01-IN)
6L-8562	[4]	STUD-TAPERLOCK (3/8-16X1.77-IN)
7L-0520	[4]	STUD-TAPERLOCK (3/8-16X1.968-IN)
8M-1047	[8]	STUD-TAPERLOCK (3/8-16X1.67-IN)
106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)
5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7N-2443	[1]	WASHER-THRUST (2.508X3.5X0.188-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
Y		SEPARATE ILLUSTRATION

#SEBP10980121

421-9722: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

421-9722 KIT-ENGINE OVERHAUL
TOP END
FOR USE WITH @@@@@ 4W-3920@@@@@, @@@@@ 4N-2247@@@@@, @@@@@ 7W-7584@@@@@, @@@@@124-3400@@@@@, @@@@@ 1W-0733@@@@@, REHS7912
ALSO FIELD INSTALLATION

i05210754 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
419-8601 Y	[2]	KIT-CYLINDER HEAD GASKET
6V-0237 Y	[1]	KIT-GASKET (EXP TANK OR HEAT EXCHANGER)
219-6544 Y	[1]	KIT-ENGINE GASKET (AFTERCOOLER, LINES)
421-1305 Y	[1]	KIT-GASKET (FUEL SYSTEM)
421-8976 Y	[1]	KIT-GASKET (OIL COOLER, LINES)

1R-1808	[2]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0749	[2]	FILTER-FUEL (ADVANCED EFFICIENCY)
4H-9541	[1]	GASKET
245-8342	[1]	GASKET
2N-2766	[24]	LOCKNUT (3/8-16-THD)
3E-6916	[4]	NUT-FULL (3/8-16-THD)
248-5513	[2]	REGULATOR-TEMPERATURE (92-DEG C)
3D-2824	[1]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
8F-4994	[1]	SEAL-O-RING
305-6843	[24]	SPRING-GUIDE
516-5987	[4]	STUD-TAPERLOCK (3/8-16X1.77-IN)
106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
Y		SEPARATE ILLUSTRATION

#SEBP10980122

436-3145: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

436-3145 KIT-ENGINE OVERHAUL -MARINE
REHS8155. RELEASE OF THE MAJOR OVERHAUL KIT FOR THE 3412C MARINE GENERATOR SET ENGINE. THIS KIT WAS CREATED TO REPLACE 419-8233 KIT
FIELD REPLACEMENT FOR @@@@@419-8233@@@@@
FOR USE WITH @@@@@ 7W-7584@@@@@, @@@@@124-3400@@@@@, @@@@@ 1W-0733@@@@@, @@@@@ 4W-3920@@@@@, @@@@@ 4N-2247@@@@@, REHS 8157
ALSO FIELD INSTALLATION

i05330148 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
419-8601 Y	[2]	KIT-CYLINDER HEAD GASKET
219-6544 Y	[1]	KIT-ENGINE GASKET (AFTERCOOLER, LINES)
6V-0237 Y	[1]	KIT-GASKET (EXP TANK OR HEAT EXCHANGER)
419-5116 Y	[1]	KIT-GASKET (FRONT STRUCTURE)
420-0925 Y	[1]	KIT-GASKET (CENTRAL, LOWER)
421-1305 Y	[1]	KIT-GASKET (FUEL SYSTEM)
421-8976 Y	[1]	KIT-GASKET (OIL COOLER, LINES)
454-5379 Y	[1]	KIT-REAR COVER GASKET

2B-2695	[4]	BOLT (5/16-18X0.875-IN)
3B-1915	[2]	BOLT (3/8-16X1.375-IN)
3G-2292	[5]	BOLT-LOCKING (3/8-16X0.87-IN)
9Y-2988	[1]	BREATHER AS (CRANKCASE)

4N-0685	[5]	BUSHING (1-IN WIDE)
4N-6658	[2]	BUSHING (1.3-IN WIDE)
6N-0977	[1]	BUSHING
2N-8109	[1]	CLAMP
7X-7958	[2]	CLAMP-HOSE
4M-1336	[1]	FERRULE
1R-1808	[2]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0749	[2]	FILTER-FUEL (ADVANCED EFFICIENCY)
4H-9541	[1]	GASKET
245-8342	[1]	GASKET (ADAPTER)
2K-4973	[1]	LOCKNUT (3/8-16-THD)
2N-2766	[24]	LOCKNUT (3/8-16-THD)
8M-2296	[4]	NUT-FULL (3/8-16-THD)
5H-8985	[1]	PIN-SPRING
6N-1027	[1]	PLATE-THRUST
112-9217	[1]	PLATE-THRUST
5F-0304	[2]	PLUG
4N-0932	[2]	PLUG-CUP
5P-0063	[4]	PLUG-CUP
111-2721	[1]	PLUG-FELT
9S-4190	[8]	PLUG-O-RING (7/8-14-THD)
7W-6492	[2]	PLUG-PIPE (1/2-14-THD)
7W-6534	[6]	PLUG-PIPE
8T-6757	[6]	PLUG-PIPE
8T-6763	[4]	PLUG-PIPE (1/4-18-THD)
8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
392-9208	[2]	PLUNGER-VALVE (RELIEF)
248-5513	[2]	REGULATOR-TEMPERATURE (92-DEG C)
3D-2824	[2]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
8F-4994	[1]	SEAL-O-RING
4N-8150	[2]	SPRING
305-6843	[24]	SPRING-GUIDE
6K-0806	[6]	STRAP-CABLE
0L-0659	[6]	STUD
106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)
5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7N-2443	[1]	WASHER-THRUST (2.508X3.5X0.188-IN THK)

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
Y		SEPARATE ILLUSTRATION

#SEBP10980123

460-9351: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

460-9351 KIT-ENGINE OVERHAUL -MAJOR REPAIR
FOR USE WITH REHS6544, ELECTRIC POWER ENGINE
FIELD INSTALLATION

i05876280 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
219-6544 Y	[1]	KIT-ENGINE GASKET (AFTERCOOLER, LINES)
419-8267 Y	[1]	KIT-ENGINE GASKET (OIL COOLER, LINES)
460-5277 Y	[1]	KIT-ENGINE GASKET (CENTRAL, LOWER STRUCTURE)
454-4763 Y	[1]	KIT-ENGINE GASKET (FRONT COVER)
460-4768 Y	[2]	KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)
421-8976 Y	[1]	KIT-GASKET (OIL COOLER, LINES)
9Y-2988	[2]	BREATHER AS (CRANKCASE)
113-5262 AB		BREATHER AS (CRANKCASE)
		(ABOVE PART IS OPTIONAL, BLACK ENGINE DRESS-UP.)
4N-6658	[2]	BUSHING (1.3-IN WIDE)
6N-0977	[1]	BUSHING
131-7123	[1]	BUSHING
1R-1808	[2]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0749	[2]	FILTER-FUEL (ADVANCED EFFICIENCY)
1L-8212	[1]	GASKET
2N-0931	[3]	GASKET
2P-8643	[1]	GASKET
4H-9541	[1]	GASKET
4L-3862	[4]	GASKET
4N-3858	[2]	GASKET (TEMPERATURE REGULATOR)
7C-0307	[4]	GASKET (REGULATOR HOUSING, OUTLET)
7M-7273	[1]	GASKET (TURBOCHARGER)
9H-2282	[1]	GASKET-STARTING MOTOR
2N-2766	[24]	LOCKNUT (3/8-16-THD)
248-5513	[2]	REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)
1S-0004	[2]	SEAL-O-RING
3D-2824	[3]	SEAL-O-RING
3J-1907	[10]	SEAL-O-RING
3J-7354	[3]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5F-9144	[1]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
109-0075	[2]	SEAL-O-RING
109-0079	[2]	SEAL-O-RING
110-7752	[4]	SEAL-O-RING
110-7753	[2]	SEAL-O-RING
114-8718	[12]	SEAL-O-RING
214-7568	[3]	SEAL-O-RING
272-2583	[5]	SEAL-O-RING
305-6843	[24]	SPRING-GUIDE
516-5987	[4]	STUD-TAPERLOCK (3/8-16X1.77-IN)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT :

		HTTP://DEALER.CAT.COM/RELATED
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
Y		SEPARATE ILLUSTRATION

#SEBP10980124

460-9353: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

460-9353 KIT-ENGINE OVERHAUL -TOP END
FOR USE WITH REHS6534, ELECTRIC POWER ENGINE
FIELD INSTALLATION

i05876285 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
219-6544 Y	[1]	KIT-ENGINE GASKET (AFTERCOOLER, LINES)
460-4768 Y	[2]	KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)
460-5299 Y	[1]	KIT-ENGINE GASKET (TURBOCHARGER)
145-2867 Y	[1]	KIT-GASKET (WATER PUMP)
421-8976 Y	[1]	KIT-GASKET (OIL COOLER, LINES)
9Y-2988	[2]	BREATHER AS (CRANKCASE)
113-5262 AB		BREATHER AS (CRANKCASE)
		(ABOVE PART IS OPTIONAL, BLACK ENGINE DRESS-UP.)
1R-1808	[2]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0749	[2]	FILTER-FUEL (ADVANCED EFFICIENCY)
1L-8212	[1]	GASKET
2N-0931	[3]	GASKET
2P-8643	[1]	GASKET
4L-3862	[4]	GASKET
4N-3858	[2]	GASKET (TEMPERATURE REGULATOR)
7C-0307	[4]	GASKET (REGULATOR HOUSING, OUTLET)
248-5513	[2]	REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)
1S-0004	[2]	SEAL-O-RING
3D-2824	[2]	SEAL-O-RING
3J-1907	[10]	SEAL-O-RING
3J-7354	[3]	SEAL-O-RING
5F-9144	[1]	SEAL-O-RING
109-0075	[2]	SEAL-O-RING
109-0079	[2]	SEAL-O-RING
110-7752	[4]	SEAL-O-RING
110-7753	[2]	SEAL-O-RING
114-8718	[12]	SEAL-O-RING
214-7568	[3]	SEAL-O-RING
272-2583	[5]	SEAL-O-RING
305-6843	[24]	SPRING-GUIDE

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT:

		HTTP://DEALER.CAT.COM/RELATED
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
Y		SEPARATE ILLUSTRATION

#SEBP10980125

449-9116: KIT-FRONT COVER GASKET

KIT-FRONT COVER GASKET

449-9116 KIT-FRONT COVER GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION

i05674901 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
4N-1946	[1]	GASKET
6N-2508	[1]	GASKET
7C-0307	[4]	GASKET (REGULATOR HOUSING, OUTLET)
193-9155	[1]	GASKET
166-9145	[1]	GASKET-CYLINDER BLOCK
142-5867	[1]	SEAL-CRANKSHAFT (FRONT)
234-8937	[1]	SEAL-INTEGRAL
8J-1688	[1]	SEAL-O-RING
467-2620	[1]	SEAL-O-RING
109-0072	[3]	SEAL-O-RING
6V-4314	[1]	SEAL-O-RING
9X-7371	[1]	SEAL-O-RING
109-0073	[1]	SEAL-O-RING
109-0074	[1]	SEAL-O-RING
109-0076	[2]	SEAL-O-RING
112-1580	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP10980126

454-5379: KIT-REAR COVER GASKET

KIT-REAR COVER GASKET

454-5379 KIT-REAR COVER GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE OIL PAN GASKET.
PART OF 436-3145 KIT-ENGINE OVERHAUL

i05772336 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
2A-1162	[2]	GASKET
2M-5446	[1]	GASKET
4N-0933	[2]	GASKET
7W-5648	[1]	GASKET
7W-5735	[1]	GASKET
9Y-6089	[2]	GASKET
161-7293	[1]	GASKET-CYLINDER
142-5868	[1]	SEAL-CRANKSHAFT (REAR)(REAR)
3P-0650	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR TH ENGINE REBUILD TO THE KIT CONSIST, PLEASE VIST

		HTTP://DEALER.CAT.COM/RELATED

#SEBP10980127

7N-1748: LIFTING GP-ENGINE

LIFTING GP-ENGINE

7N-1748 LIFTING GP-ENGINE

i00408453 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-1751	[1]	BRACKET-LIFTING (FRONT, RH)
2.	0S-1585	[4]	BOLT (1/2-13X1.5-IN)
3.	5P-8245	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	7N-1749	[1]	BRACKET-LIFTING (REAR LH)
5.	4B-3823	[4]	BOLT (1/2-13X1.25-IN)

#SEBP10980128

1W-1806: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

1W-1806 MOUNTING GP-ALTERNATOR
S/N 60M1528-5160
24 VOLT, 60 AMPERE. REQUIRES 1200 RPM ENGINE OR CUSTOMER PROVIDED VOLTMETER OR AMMETER
Type 1
FOR USE WITH @@@@@ 8M-7892@@@@@, LOW SPEED ENGINES
AN ATTACHMENT

i00974047 SEBP1098

1W1806 MOUNTING GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-7648	[1]	BRACKET
2.	1W-1785	[1]	PULLEY-ALTERNATOR (2-GROOVE)
3.	9L-6724	[1]	V-BELT SET (INCLUDES 2-BELTS)(INCLUDES 2 BELTS)
4.	8B-9725	[1]	BOSS (17/32X1X1/4-IN THK)
5.	1D-4720	[3]	NUT (5/8-11-THD)
	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
6.	4S-5780	[1]	ROD
7.	8N-7677	[1]	BRACKET AS
8.	0T-0065	[2]	BOLT (3/8-16X3.5-IN)
9.	0S-1594	[5]	BOLT (3/8-16X1-IN)
10.	5M-2894	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	8S-5383	[1]	BLOCK
12.	2B-0947	[1]	BOLT (1/2-13X2.25-IN)
13.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	1A-1135	[1]	BOLT (5/8-11X2-IN)
15.	9H-8260	[1]	BOLT (1/2-13X6.25-IN)
16.	1D-4719	[1]	NUT-FULL (1/2-13-THD)
	1N-8509 FY	[1]	WIRING GP-ALTERNATOR
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#SEBP10980129

1W-1806: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

1W-1806 MOUNTING GP-ALTERNATOR
S/N 60M1528-5160
24 VOLT, 60 AMPERE. REQUIRES 1200 RPM ENGINE OR CUSTOMER PROVIDED VOLTMETER OR AMMETER
Type 2
FOR USE WITH @@@@@ 8M-7892@@@@@, LOW SPEED ENGINES
AN ATTACHMENT

i00355760 SEBP1098

For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-7648	[1]	BRACKET
2.	1W-1785	[1]	PULLEY-ALTERNATOR (2-GROOVE)
3.	9L-6724	[1]	V-BELT SET (INCLUDES 2-BELTS)(ALTERNATOR)
4.	8B-9725	[1]	BOSS (17/32X1X1/4-IN THK)
5.	4K-0367	[5]	NUT-FULL (5/8-11-THD)
	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
6.	4S-5780	[1]	ROD
7.	8N-7677	[1]	BRACKET AS
8.	0T-0065	[2]	BOLT (3/8-16X3.5-IN)
9.	0S-1594	[5]	BOLT (3/8-16X1-IN)
10.	5M-2894	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	8S-5383	[1]	BLOCK
12.	2B-0947	[1]	BOLT (1/2-13X2.25-IN)
13.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	1A-1135	[1]	BOLT (5/8-11X2-IN)
15.	9H-8260	[1]	BOLT (1/2-13X6.25-IN)
16.	1F-7958	[1]	NUT-FULL (1/2-13-THD)

Information:

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD

Engine News

Improved Procedure to Install Double Wall Fuel Lines {1252, 1254}
2008/07/07

3412 Marine Engine Overhaul Kits Are Available for Top End and Major Overhauls {1000}
2012/12/10

Improved 3412 Marine Bundled Repair Solution Foundational Kits Are Available {1000}
2013/06/13

Top End and Major Overhaul Foundational Kits Are Available for 3412 Electric Power Engines {1000}
2014/10/23

Special Instruction

Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Top End 421-9722 Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
Top End 421-9722 Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}

436-3145 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
436-3145 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}

460-9353 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
460-9353 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}

460-9351 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
460-9351 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}

Reuse And Salvage Guidelines

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Disassembly and Assembly

Camshaft Bearings
3412 INDUSTRIAL & MARINE ENGINES

Connecting Rod Bearings
3412 INDUSTRIAL & MARINE ENGINES

Crankshaft Main Bearings
3412 INDUSTRIAL & MARINE ENGINES

Service Magazine

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Caterpillar Parts SIS Catalog 3412 :

460-5299 KIT-ENGINE GASKET

460-5277 KIT-ENGINE GASKET

460-4768 KIT-ENGINE GASKET

454-4763 KIT-ENGINE GASKET

452-9987 KIT-ENGINE GASKET

452-9977 KIT-ENGINE GASKET

438-0142 KIT-ENGINE GASKET

438-0128 KIT-ENGINE GASKET

421-9722 KIT-ENGINE OVERHAUL

436-3145 KIT-ENGINE OVERHAUL

460-9351 KIT-ENGINE OVERHAUL

460-9353 KIT-ENGINE OVERHAUL

449-9116 KIT-FRONT COVER GASKET

454-5379 KIT-REAR COVER GASKET

7N-1748 LIFTING GP-ENGINE

1W-1806 MOUNTING GP-ALTERNATOR

Truck sale:

95,720

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

96,795

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

93,569

Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.

60,000

Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

159,600

Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY