AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N-3104 CONVERSION GP-GOVERNOR Type 1 FIELD INSTALLATION 3412 MARINE ENGINE


FUEL SYSTEM
GOVERNOR GP
DRAIN GP-FUEL
GOVERNOR GP

MARINE ENGINE 3412 MARINE ENGINE 60M
 3412B Marine Engine 60M00001-05160 SEBP1098 3412 60M   (1976)

FUEL SYSTEM

GOVERNOR GP
ACTUATOR GP-AIR
5N-3220 ACTUATOR GP-AIR
CONVERSION GP-GOVERNOR
8N-3104 CONVERSION GP-GOVERNOR
CONVERSION GP-GOVERNOR
8N-3104 CONVERSION GP-GOVERNOR
CONVERSION GP-GOVERNOR
8N-3104 CONVERSION GP-GOVERNOR
CONVERSION GP-GOVERNOR
8N-3104 CONVERSION GP-GOVERNOR
 

#SEBP10980450
 

8N-3104: CONVERSION GP-GOVERNOR

8N-3104 CONVERSION GP-GOVERNOR
Type 1
FIELD INSTALLATION
i00974064 SEBP1098
8N3104 CONVERSION GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-9735 Y [1] GOVERNOR GP  
2. 4N-9792 Y [1] FASTENER GP-GOVERNOR  
3. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
4. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
6. 4N-1868 [1] GASKET  
7. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
8. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
10. 2A-0762 [1] BOLT (1/4-20X0.625-IN)  
11. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
12. 1L-5316 [1] PIN-SPRING  
13. 0S-1616 [1] BOLT (1/4-20X1-IN)  
14. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SETSCREW  
15. 6N-2955 [1] SWITCH-RACK STOP  
16. 6N-2837 [1] COVER  
  1H-3943 [1] WASHER  
17. 1F-9303 [1] LEVER-GOVERNOR  
18. 2H-3738 [1] BOLT (5/16-24X1-IN)  
19. 5K-9246 [1] CONNECTOR  
20. 6N-2832 [1] TUBE AS  
21. 5K-9235 [1] ELBOW-FLARED  
22. 2H-5330 [5] BOLT (3/8-16X2.88-IN)  
23. 6N-2834 [1] WASHER  
24. 7S-5757 [1] RING-RETAINING  
25. 4N-9766 [1] PINION-GOVERNOR DRIVE  
26. 4N-0907 [1] LEVER-SHUTOFF  
27. 6N-2838 [1] SHAFT  
28. 7J-9018 [2] BOLT-SOCKET HEAD (10-24X0.625-IN)  
29. 6N-2835 [1] LEVER-SHUTOFF  
30. 1S-7984 [2] BUSHING  
31. 2M-2489 [2] SEAL-LIP TYPE  
32. 8N-1635 Y [1] SWITCH GP-GOVERNOR  
33. 6N-2839 [1] SHAFT  
34. 6N-2836 [1] LEVER-RACK STOP  
35. 6N-6926 [1] SPRING  
36. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
37. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
38. 4N-1104 [1] GASKET  
39. 031-0215 [1] BOLT-LOCKING (1/4-20X0.625-IN)  
    SMHS7F36 FORM --- (CONVERSION INSTRUCTION) SMH57188 FORM --- (LINKAGE ADJUSTMENT INSTRUCTION)
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980451
 

8N-3104: CONVERSION GP-GOVERNOR

8N-3104 CONVERSION GP-GOVERNOR
Type 2
FIELD INSTALLATION
i00974065 SEBP1098
8N3104 CONVERSION GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-6951 CY [1] GOVERNOR GP  
2. 4N-9792 Y [1] FASTENER GP-GOVERNOR  
3. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
4. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
6. 4N-1868 [1] GASKET  
7. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
8. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
10. 2A-0762 [1] BOLT (1/4-20X0.625-IN)  
11. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
12. 1L-5316 [1] PIN-SPRING  
13. 0S-1616 [1] BOLT (1/4-20X1-IN)  
14. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SETSCREW  
15. 6N-2955 [1] SWITCH-RACK STOP  
16. 6N-2837 [1] COVER  
  1H-3943 [1] WASHER  
17. 1F-9303 [1] LEVER-GOVERNOR  
18. 2H-3738 [1] BOLT (5/16-24X1-IN)  
19. 5K-9246 [1] CONNECTOR  
20. 6N-2832 [1] TUBE AS  
21. 5K-9235 [1] ELBOW-FLARED  
22. 2H-5330 [5] BOLT (3/8-16X2.88-IN)  
23. 6N-2834 [1] WASHER  
24. 7S-5757 [1] RING-RETAINING  
25. 4N-9766 [1] PINION-GOVERNOR DRIVE  
26. 4N-0907 [1] LEVER-SHUTOFF  
27. 6N-2838 [1] SHAFT  
28. 7J-9018 [2] BOLT-SOCKET HEAD (10-24X0.625-IN)  
29. 6N-2835 [1] LEVER-SHUTOFF  
30. 1S-7984 [2] BUSHING  
31. 2M-2489 [2] SEAL-LIP TYPE  
32. 8N-6670 CY [1] SWITCH GP-GOVERNOR  
33. 6N-2839 [1] SHAFT  
34. 6N-2836 [1] LEVER-RACK STOP  
35. 6N-6926 [1] SPRING  
36. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
37. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
38. 4N-1104 [1] GASKET  
39. 031-0215 [1] BOLT-LOCKING (1/4-20X0.625-IN)  
    SMHS7F36 FORM --- (CONVERSION INSTRUCTION) SMH57188 FORM --- (LINKAGE ADJUSTMENT INSTRUCTION)
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980452
 

8N-3104: CONVERSION GP-GOVERNOR

8N-3104 CONVERSION GP-GOVERNOR
Type 3
FIELD INSTALLATION
i00430191 SEBP1098
8N3104 CONVERSION GP-GOVERNOR Parts scheme 8N3104 CONVERSION GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1637 CY [1] GOVERNOR GP  
2. 4N-9792 Y [1] FASTENER GP-GOVERNOR  
3. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
4. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
6. 4N-1868 [1] GASKET  
7. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
8. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
10. 2A-0762 [1] BOLT (1/4-20X0.625-IN)  
11. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
12. 1L-5316 [1] PIN-SPRING  
13. 0S-1616 [1] BOLT (1/4-20X1-IN)  
14. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SETSCREW  
15. 1W-1401 C [1] SCREW-RACK STOP  
16. 6N-2837 [1] COVER  
  1H-3943 [1] WASHER  
17. 1F-9303 [1] LEVER-GOVERNOR  
18. 2H-3738 [1] BOLT (5/16-24X1-IN)  
19. 5K-9246 [1] CONNECTOR  
20. 6N-2832 [1] TUBE AS  
21. 5K-9235 [1] ELBOW-FLARED  
22. 2H-5330 [5] BOLT (3/8-16X2.88-IN)  
23. 6N-2834 [1] WASHER  
24. 7S-5757 [1] RING-RETAINING  
25. 4N-9766 [1] PINION-GOVERNOR DRIVE  
26. 4N-0907 [1] LEVER-SHUTOFF  
27. 6N-2838 [1] SHAFT  
28. 7J-9018 [2] BOLT-SOCKET HEAD (10-24X0.625-IN)  
29. 6N-2835 [1] LEVER-SHUTOFF  
30. 1S-7984 [2] BUSHING  
31. 2M-2489 [2] SEAL-LIP TYPE  
32. 8N-6670 Y [1] SWITCH GP-GOVERNOR  
33. 6N-2839 [1] SHAFT  
34. 6N-2836 [1] LEVER-RACK STOP  
35. 3L-6670 C [1] RETAINER-DRIVE  
36. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
37. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
38. 4N-1104 [1] GASKET  
39. 031-0215 [1] BOLT-LOCKING (1/4-20X0.625-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980453
 

8N-3104: CONVERSION GP-GOVERNOR

8N-3104 CONVERSION GP-GOVERNOR
Type 4
FIELD INSTALLATION
i00430198 SEBP1098
8N3104 CONVERSION GP-GOVERNOR Parts scheme 8N3104 CONVERSION GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-6951 CY [1] GOVERNOR GP  
2. 4N-9792 Y [1] FASTENER GP-GOVERNOR  
3. 5K-9235 [1] ELBOW-FLARED  
4. 2H-5330 [5] BOLT (3/8-16X2.88-IN)  
5. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
6. 4N-1868 [1] GASKET  
7. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
8. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
10. 2A-0762 [1] BOLT (1/4-20X0.625-IN)  
11. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
12. 1L-5316 [1] PIN-SPRING  
13. 0S-1616 [1] BOLT (1/4-20X1-IN)  
14. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SETSCREW  
15. 1W-1401 [1] SCREW-RACK STOP  
16. 6N-2837 [1] COVER  
  1H-3943 [1] WASHER  
17. 1F-9303 [1] LEVER-GOVERNOR  
18. 2H-3738 [1] BOLT (5/16-24X1-IN)  
19. 5K-9246 [1] CONNECTOR  
20. 6N-2832 [1] TUBE AS  
21. 6N-2834 [1] WASHER  
22. 7S-5757 [1] RING-RETAINING  
23. 4N-9766 [1] PINION-GOVERNOR DRIVE  
24. 4N-0907 [1] LEVER-SHUTOFF  
25. 6N-2838 [1] SHAFT  
26. 7J-9018 [2] BOLT-SOCKET HEAD (10-24X0.625-IN)  
27. 6N-2835 [1] LEVER-SHUTOFF  
28. 1S-7984 [2] BUSHING  
29. 2M-2489 [2] SEAL-LIP TYPE  
30. 8N-6670 Y [1] SWITCH GP-GOVERNOR  
31. 6N-2839 [1] SHAFT  
32. 6N-2836 [1] LEVER-RACK STOP  
33. 3L-6670 [1] RETAINER-DRIVE  
34. [2] BOLT  
35. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
36. 4N-1104 [1] GASKET  
37. 031-0215 [1] BOLT-LOCKING (1/4-20X0.625-IN)  
38. 0S-1591 C [6] BOLT (3/8-16X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980454
 

8N-6389: COVER GP-GOVERNOR

8N-6389 COVER GP-GOVERNOR
PART OF 4N-1894 GOVERNOR GP
i00412931 SEBP1098
8N6389 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-7316 [1] DOWEL  
2. 2S-7465 [1] SCREW-MACHINE  
3. 4B-2042 [1] NUT (8-32-THD)  
4. 3B-4501 [1] LOCKWASHER (NO. 8)  
5. 2S-7307 [2] INSULATOR  
6. 8F-1462 [2] WASHER-PLATED  
 

#SEBP10980455
 

2W-5100: DRAIN GP-FUEL

2W-5100 DRAIN GP-FUEL -LH LINES AND ALARM SWITCH
S/N 60M249-5160
Type 1
FOR USE WITH @@@@@ 5N-5340@@@@@, @@@@@ 2W-3536@@@@@, @@@@@ 2W-3537@@@@@
CANNOT BE USED WITH LH PREMIUM INST. PANEL AND LH DUPLEX OIL FILTER SYSTEMS TOGETHER
AN ATTACHMENT
i00359438 SEBP1098
2W5100 DRAIN GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-9768 [1] SWITCH-LIQUID LEVEL (FUEL)  
2. 2W-3089 [1] BRACKET AS  
3. 0S-1594 [2] BOLT (3/8-16X1-IN)  
4. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
6. 0S-1616 [2] BOLT (1/4-20X1-IN)  
7. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 9S-8750 [2] NUT-FULL (1/4-20-THD)  
9. 5N-5940 [10] TUBE AS  
10. 9L-8496 [13] TEE-INVERTED FLARED  
11. 9L-8492 [3] PLUG  
12. 9L-8557 [1] TEE-INVERTED FLARED  
13. 2W-3091 [1] TUBE AS  
14. 2W-3092 [1] TUBE AS  
15. 2W-3934 [1] TUBE AS  
16. 8B-1931 [1] BUSHING-REDUCER  
17. 4M-5317 [1] BUSHING-REDUCER  
18. 5N-7739 [1] TUBE AS  
19. 5K-9243 [1] ELBOW-FLARED  
20. 2B-2404 [5] CLIP  
 

#SEBP10980456
 

2W-5100: DRAIN GP-FUEL

2W-5100 DRAIN GP-FUEL -LH LINES AND ALARM SWITCH
S/N 60M249-5160
Type 2
FOR USE WITH @@@@@ 5N-5340@@@@@, @@@@@ 2W-3536@@@@@, @@@@@ 2W-3537@@@@@
CANNOT BE USED WITH LH PREMIUM INST. PANEL AND LH DUPLEX OIL FILTER SYSTEMS TOGETHER
AN ATTACHMENT
i00359440 SEBP1098
2W5100 DRAIN GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2296 C [1] SWITCH AS-LIQUID LEVEL (LIQUID LEVEL)(FUEL ALARM)  
  7W-2295 [1] COVER AS-SWITCH  
2. 7W-1226 C [1] PLATE  
3. 9L-8493 C [1] CAP-FLARED  
4. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4S-5719 CB [2] SPACER (10.31X25X12.7-MM THK)  
6. 8T-8908 [2] BOLT (1/4-20X1-IN)  
7. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 6V-8185 [2] NUT (1/4-20-THD)  
9. 5N-5940 [10] TUBE AS  
10. 9L-8496 [13] TEE-INVERTED FLARED  
11. 9L-8492 C [2] PLUG (FUEL DRAIN)  
12. 9S-7695 C [1] TEE  
13. 2W-3091 [1] TUBE AS  
14. 2W-3092 [1] TUBE AS  
15. 4W-4901 CI [1] HOSE AS  
16. 8B-1931 [1] BUSHING-REDUCER  
17. 4M-5317 [1] BUSHING-REDUCER  
18. 5N-7739 [1] TUBE AS  
19. 5K-9243 [1] ELBOW-FLARED  
20. 2B-2404 C [2] CLIP  
21. 5D-9231 C [1] CONNECTOR  
22. 0S-1594 CB [2] BOLT (3/8-16X1-IN)  
  0S-1588 CB [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP10980457
 

6N-1656: DRIVE GP-GOVERNOR

6N-1656 DRIVE GP-GOVERNOR
PART OF 8N-3104 CONVERSION GP-GOVERNOR
i00748500 SEBP1098
6N1656 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9770 [1] HOUSING AS  
2. 4N-0898 [1] DOWEL-HOLLOW  
3. 5P-0796 [1] SEAL-LIP TYPE  
4. 1F-4622 [1] BEARING AS-NEEDLE  
5. 2L-7103 [1] BEARING AS-NEEDLE  
6. 4H-8920 [1] DOWEL  
7. 2B-0858 [1] PLUG-PIPE  
8. 3S-4818 [1] SPRING  
9. 2W-8449 [1] STRAINER AS (FUEL)  
10. 0S-1597 [1] BOLT (1/4-28X1-IN)  
11. 2S-4280 [1] LEVER  
  1B-8735 [1] KEY-WOODRUFF  
12. 6N-7283 [1] SLEEVE-CONTROL SHAFT  
  4B-2152 [1] BOLT (1/4-28X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 5M-6214 [1] PLUG (1/8-27 PTF)  
14. 3D-2824 [1] SEAL-O-RING  
15. 9S-8008 [1] PLUG (1-1/16-12-THD)  
16. 4N-9762 [1] LEVER-RACK CONTROL  
17. 7S-5757 [1] RING-RETAINING  
18. 4N-9764 [1] SHAFT-GOVERNOR  
19. 1P-1744 [1] DOWEL  
20. 6N-7284 [1] SPRING-CONTROL SHAFT  
21. 6V-7529 C [1] ADAPTER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980458
 

6N-1656: DRIVE GP-GOVERNOR

6N-1656 DRIVE GP-GOVERNOR
PART OF 8N-3104 CONVERSION GP-GOVERNOR, 4W-6074 PUMP GP-GOV DRV,FUEL INJ & TFR
AN ATTACHMENT
i00406368 SEBP1098
6N1656 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4533 CY [1] HOUSING AS-GOVERNOR DRIVE  
2. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
3. 1P-1744 [1] DOWEL  
4. 4N-9764 [1] SHAFT-GOVERNOR  
5. 0S-1597 [1] BOLT (1/4-28X1-IN)  
6. 2S-4280 [1] LEVER  
  1B-8735 [1] KEY-WOODRUFF  
7. 6N-7283 [1] SLEEVE-CONTROL SHAFT  
  4B-2152 [1] BOLT (1/4-28X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 6N-7284 [1] SPRING-CONTROL SHAFT  
9. 3D-2824 C [2] SEAL-O-RING  
10. 9S-8008 C [2] PLUG (1-1/16-12-THD)  
11. 4N-9762 [1] LEVER-RACK CONTROL  
12. 7S-5757 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980459
 

125-4580: DRIVE GP-GOVERNOR & FUEL PUMP

125-4580 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 60M400-5160
i00522015 SEBP1098
1254580 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-5793 [4] BOLT-12 POINT HEAD (1/2-13X2-IN)  
2. 6N-3927 [1] RETAINER  
3. 8N-8998 [1] FLANGE AS  
4. 6N-2533 [1] GEAR AS-ADVANCE (86-TEETH)(86 TEETH)  
5. 8H-0333 [2] PISTON  
6. 6N-2523 [2] SLIDE  
7. 8N-8997 [2] WEIGHT-ADVANCE  
8. 6N-0493 [1] RING  
9. 9N-5077 [2] SPRING  
10. 6N-5163 [2] SPRING  
 

Information:

Engine News
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Fuel Rack Slots Have Improved Wear Resistance
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19
Change 6V3060 EGR Testers To LES Testers
1983/04/27
New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
Changes To Fuel Systems
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/01
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
New Spring Used In Fuel Ratio Control
1977/03/15
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For The Tachometer Drive Group And Transfer Pump
1978/03/01
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Installation Of 7N7783 Sleeve And 8N6579 Spring Or 8N7526 Governor Group{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
3400 V - Block Cleaniness at Gov'n Oil Supply Line
3400 V - Block Cleaniness at Gov'n Oil Supply Line
Specifications
Fuel System Identification
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection
3412 INDUSTRIAL AND MARINE ENGINES
Governor
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing (Earlier)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing (Later)
3412 INDUSTRIAL AND MARINE ENGINES
Governor Drive And Oil Pump
3412 INDUSTRIAL AND MARINE ENGINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Standard Engine)
3412 INDUSTRIAL AND MARINE ENGINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit) (Low Speed Engine)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Ratio Control
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Transfer Pump
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Transfer Pump Drive
3412 INDUSTRIAL AND MARINE ENGINES
Woodward PSG Governor
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Linkage
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Controls
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Air Actuator
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3408C & 3412C MARINE ENGINES
Fuel Injection Pumps
3408C & 3412C MARINE ENGINES
Governor & Fuel Pump Drive
3408C & 3412C MARINE ENGINES
Fuel Injection Pump Housing & Governor
3408C & 3412C MARINE ENGINES
Governor
3408C & 3412C MARINE ENGINES
Fuel Ratio Control
3412 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3412 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3412 INDUSTRIAL & MARINE ENGINES
Governor (Low Speed Engine)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing & Governor
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly{1365}
1990/07/30
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/10
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

Caterpillar Parts SIS Catalog 3412 :

CONTROL GP-GOVERNOR
6N-2846 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6N-2845 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6N-2844 CONTROL GP-GOVERNOR
5L-1890 CONTROL GP-GOVERNOR
5L-1889 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3828 CONTROL GP-GOVERNOR
CONVERSION GP-GOVERNOR
8N-3104 CONVERSION GP-GOVERNOR
CONVERSION GP-GOVERNOR
8N-3104 CONVERSION GP-GOVERNOR
CONVERSION GP-GOVERNOR
8N-3104 CONVERSION GP-GOVERNOR
COVER GP-GOVERNOR
8N-6389 COVER GP-GOVERNOR
DRAIN GP-FUEL
2W-5100 DRAIN GP-FUEL
DRAIN GP-FUEL
2W-5100 DRAIN GP-FUEL
DRIVE GP-GOVERNOR
6N-1656 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
6N-1656 DRIVE GP-GOVERNOR

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.