AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N-5140 FASTENER GP-FUEL INJ LINES 3412 MARINE ENGINE


FUEL SYSTEM
LINES GP-FUEL
PUMP GP-FUEL INJECTION
GOVERNOR GP
FILTER GP-FUEL
GOVERNOR GP

MARINE ENGINE 3412 MARINE ENGINE 60M
 3412B Marine Engine 60M00001-05160 SEBP1098 3412 60M   (1976)

FUEL SYSTEM

LINES GP-FUEL
DRAIN GP-FUEL
2W-5100 DRAIN GP-FUEL
DRAIN GP-FUEL
2W-5100 DRAIN GP-FUEL
FASTENER GP-FUEL INJ LINES
6N-5140 FASTENER GP-FUEL INJ LINES
KIT-FUEL INJECTION LINES CLAMP
6I-4813 KIT-FUEL INJECTION LINES CLAMP
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
LINES GP-FUEL FILTER
4W-8836 LINES GP-FUEL FILTER
 

#SEBP10980470
 

6N-5140: FASTENER GP-FUEL INJ LINES

6N-5140 FASTENER GP-FUEL INJ LINES
i00387273 SEBP1098
6N5140 FASTENER GP-FUEL INJ LINES Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
2. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 6I-0348 [1] BRACKET AS  
4. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
5. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
6. 0S-1594 [3] BOLT (3/8-16X1-IN)  
7. 9X-6458 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP10980471
 

9Y-3336: FASTENER GP-FUEL INJ PUMP

9Y-3336 FASTENER GP-FUEL INJ PUMP
S/N 60M400-5160
PART OF 4W-8295, 4W-8618, 4W-8679 PUMP GP-GOV, FUEL INJ & TFR
i00109051 SEBP1098
9Y3336 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [4] BOLT (3/8-16X1-IN)  
2. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
3. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
4. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
5. 053-2294 [1] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
6. 3B-1915 [4] BOLT (3/8-16X1.375-IN)  
 

#SEBP10980472
 

4N-9792: FASTENER GP-GOVERNOR

4N-9792 FASTENER GP-GOVERNOR
PART OF 8N-3104 CONVERSION GP-GOVERNOR
i00540245 SEBP1098
4N9792 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-2292 [1] ROD-ADJUSTMENT  
2. 7L-4186 [2] ROD END  
3. 0S-1597 [2] BOLT (1/4-28X1-IN)  
  2L-9038 [2] LOCKNUT (1/4-28-THD)  
4. 6V-8186 C [2] NUT-FULL (5/16-24-THD)  
5. 6L-3528 [1] GASKET  
6. 6L-2082 [1] COUPLING-GOVERNOR DRIVE  
7. 5S-0003 C [4] NUT (5/16-18-THD)  
8. 4L-7547 [4] STUD-TAPERLOCK (5/16-18X2-IN)  
9. 8S-8158 [1] SEAL-WIRE  
10. 8C-4983 E LOCKWIRE (20CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP10980473
 

4N-6925: FILTER GP-FUEL

4N-6925 FILTER GP-FUEL
i00108680 SEBP1098
4N6925 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2946 [1] BASE AS-FUEL FILTER  
  9S-4167 [2] STUD-HOLLOW (1-14X1.47-IN)  
2. 9S-8004 C [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
3. 9S-4191 [2] PLUG (9/16-18-THD)  
  6V-5049 [2] SEAL-O-RING  
4. 1R-0749 [2] FILTER-FUEL (ADVANCED EFFICIENCY)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980474
 

6N-6258: FILTER GP-FUEL

6N-6258 FILTER GP-FUEL -DUPLEX-RH
FOR USE WITH WATERCOOLED MANIFOLD
AN ATTACHMENT
i00388244 SEBP1098
6N6258 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0749 [3] FILTER-FUEL (ADVANCED EFFICIENCY)  
2. 2S-3992 [1] SPRING  
3. 266-0889 C [2] INDICATOR AS (FUEL PRESSURE)  
4. 5P-5528 [2] BUSHING-REDUCER  
5. 8N-7044 C [1] FILM-DUPLEX VALVE (FUEL FILTER, RH)  
6. 6N-6248 [1] PLATE  
7. 6N-6249 [1] JUNCTION BLOCK  
8. 6N-6250 [2] GASKET  
9. 6N-6251 [1] LEVER  
10. 6N-6252 [1] VALVE  
11. 6N-6254 [1] BASE AS-FUEL FILTER  
11A. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 6N-6259 [1] BASE AS-FUEL FILTER  
12A. 9S-4167 [2] STUD-HOLLOW (1-14X1.47-IN)  
13. 7E-5346 [1] VALVE AS (FUEL FILTER)  
14. 030-7947 [3] ADAPTER-ELBOW  
15. 030-7962 [1] ELBOW  
16. 0S-1571 [3] BOLT (3/8-16X1.75-IN)  
17. 2D-6642 [1] BALL  
18. 2K-8467 [1] PIN-SPRING  
19. 3B-1915 [3] BOLT (3/8-16X1.375-IN)  
20. 3K-4897 [1] PIN-SPRING  
21. 5F-4899 [3] BOLT (3/8-16X5.5-IN)  
22. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
24. 5P-0840 C [2] SEAL-O-RING  
25. 6L-3428 [2] SCREW-MACHINE  
26. 6V-4589 [1] SEAL-O-RING  
27. 6V-5048 [2] SEAL-O-RING  
28. 6V-5049 [4] SEAL-O-RING  
29. 7J-4026 [1] ELBOW  
30. 9S-8006 [1] PLUG (7/8-14-THD)  
31. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980475
 

6N-6289: FILTER GP-FUEL

6N-6289 FILTER GP-FUEL -DUPLEX-LH
FOR USE WITH WATERCOOLED MANIFOLD, SINGLE TURBO AIR CLEANER
AN ATTACHMENT
i00388303 SEBP1098
6N6289 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0749 [3] FILTER-FUEL (ADVANCED EFFICIENCY)  
2. 2S-3992 [1] SPRING  
3. 266-0889 [2] INDICATOR AS (FUEL PRESSURE)  
4. 5P-5528 [2] BUSHING-REDUCER  
5. 8N-7045 [1] FILM-DUPLEX VALVE (FUEL FILTER, LH)  
6. 6N-6248 [1] PLATE  
7. 6N-6250 [2] GASKET  
8. 6N-6251 [1] LEVER  
9. 6N-6252 [1] VALVE  
10. 6N-6254 [1] BASE AS-FUEL FILTER  
10A. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
11. 6N-6259 [1] BASE AS-FUEL FILTER  
11A. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 6N-6300 [1] JUNCTION BLOCK  
13. 7E-5346 [1] VALVE AS (FUEL FILTER)  
14. [2] ELBOW  
15. 0S-1571 [3] BOLT (3/8-16X1.75-IN)  
16. 2D-6642 [1] BALL  
17. 2K-8467 [1] PIN-SPRING  
18. 4H-1641 [1] PIN-SPRING  
19. 5F-4899 [3] BOLT (3/8-16X5.5-IN)  
20. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
22. 5P-0840 C [2] SEAL-O-RING  
23. 6L-3428 [2] SCREW-MACHINE  
24. 6V-4589 [1] SEAL-O-RING  
25. 6V-5048 [2] SEAL-O-RING  
26. 6V-5049 [2] SEAL-O-RING  
27. 9S-8006 [1] PLUG (7/8-14-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980476
 

8H-7204: FILTER GP-FUEL

8H-7204 FILTER GP-FUEL
PRIMARY
AN ATTACHMENT
i00108873 SEBP1098
8H7204 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3583 C [1] BASE-FUEL FILTER  
2. 7N-1628 C [1] NUT (3/8-24-THD)  
3. 2J-0157 C [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 7H-9678 [1] RETAINER-ELEMENT  
6. 2H-3429 [1] RING-RETAINING  
7. 7S-9323 [1] SPRING  
8. 8H-7202 [1] CASE AS-FUEL FILTER  
9. 9M-2342 [1] FILTER ELEMENT-FUEL (PRIMARY)  
10. 8H-2778 [1] SEAL-RING (FUEL FILTER BASE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980477
 

1N-4633: GOVERNOR GP

1N-4633 GOVERNOR GP
S/N 60M1528-2531
PART OF 1W-0255 PUMP GP-GOV, FUEL INJ & TFR
Type 1
i00974046 SEBP1098
1N4633 GOVERNOR GP Parts scheme 1N4633 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-8992 [1] COVER-ADJUSTMENT  
2. 6L-1756 [1] BOLT (1/4-20X1.5-IN)  
  4B-9747 [1] WASHER (0.266X0.375X0.031-IN THK)  
3. 8L-4155 [1] SETSCREW  
  1B-4201 [1] NUT-FULL (1/4-28-THD)  
4. 9M-4704 [1] BOLT (8-32X1-IN)  
5. 8L-4154 [1] COLLAR-LOAD STOP  
6. 2N-4386 [1] COVER  
7. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
  1B-4330 [2] NUT (1/4-20-THD)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 8S-5388 [2] GASKET  
9. 2P-8669 [1] GASKET  
10. 2P-8686 [1] LEVER AS-CONTROL  
  9S-4466 [1] LEVER AS-CONTROL  
11. 9M-9788 [1] PLUNGER  
12. 7M-7316 [1] SPRING  
13. 5H-1351 [1] PIN-SPRING  
14. 2W-8449 [1] STRAINER AS (FUEL)  
15. 2P-8697 [1] GASKET  
16. 6N-3504 [1] SEAT-GOVERNOR SPRING  
17. 4N-1870 [1] GASKET-HOUSING  
18. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
19. 5M-6214 [1] PLUG (1/8-27 PTF)  
20. 1N-4519 Y [1] PLATE GP-GOVERNOR ADAPTER  
21. 6N-9040 [1] DRIVE AS-FLEXIBLE  
  6D-9953 [1] PIN-SPRING  
  9N-2428 [1] RIVET  
22. 6N-4158 [1] RING-GOVERNOR DRIVE  
23. 6N-4164 [1] SPRING  
24. 6N-4156 [1] RING-RETAINING  
25. 8H-9181 [1] SPRING-BUMPER  
26. 9S-4673 [1] BAND AS-LEVER  
27. 9S-4468 [1] BOLT-SPECIAL  
  2F-4159 [1] LOCKNUT  
28. 6N-8793 [1] SPRING  
29. 5L-8991 [1] GASKET-COVER  
30. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
31. 061-6708 [1] RING-RETAINING  
32. 9N-3363 [1] HOUSING AS-GOVERNOR  
33. 8S-0134 [1] BUSHING  
34. 8M-8403 [1] SPRING-GUIDE  
35. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
36. 9S-0798 [1] BUSHING  
37. 5P-3272 [2] SEAL-LIP TYPE  
38. 8L-4308 [1] BOLT (5/16-18X2.75-IN)  
39. 3F-9556 [5] LOCKWASHER  
40. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
41. 2P-8707 [1] PLATE AS-GOVERNOR  
42. 8L-4175 [1] DOWEL  
43. 0S-1594 [1] BOLT (3/8-16X1-IN)  
44. 1D-4540 [3] BOLT (5/16-18X2.75-IN)  
45. 4N-1911 [1] SHAFT  
46. 9N-1917 [1] COVER AS  
47. 3P-0009 [1] INSULATOR  
48. 9N-1916 [1] LEVER-SHUTOFF  
49. 5M-6228 [1] BEARING AS-NEEDLE  
50. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
51. 9N-2165 [1] LEVER-SOLENOID  
52. 1S-7336 [2] LOCK-BOLT  
53. 0S-1614 [2] BOLT (1/4-20X0.5-IN)  
54. 5P-0796 [2] SEAL-LIP TYPE  
55. 4N-0951 [1] SHAFT-SHUTOFF  
56. 1S-7984 [1] BUSHING  
57. 1K-4703 [1] WASHER (13.1X22.2X1.6-MM THK)  
58. 9N-3324 [1] SCREW-ADJUSTMENT (HIGH IDLE)  
59. 2J-0157 [2] SEAL-O-RING  
60. 8N-3154 [1] SCREW AS-ADJUSTMENT  
  9S-4980 [1] SCREW-ADJUSTMENT (LOW IDLE)  
61. 8N-3153 [1] END-ADJUSTMENT SCREW  
62. 4H-1641 [1] PIN-SPRING  
63. 9S-4982 [1] SPRING  
64. 9S-7052 [1] SLEEVE-DETENT  
65. 8H-9204 [2] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980478
 

1N-4633: GOVERNOR GP

1N-4633 GOVERNOR GP
S/N 60M1528-2531
PART OF 1W-0255 PUMP GP-GOV, FUEL INJ & TFR
Type 2
i00352660 SEBP1098
1N4633 GOVERNOR GP Parts scheme 1N4633 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-8992 [1] COVER-ADJUSTMENT  
2. 5P-6945 [1] BOLT (1/4-20X1.125-IN)  
  4B-9747 [1] WASHER (0.266X0.375X0.031-IN THK)  
3. 8L-4155 [1] SETSCREW  
  1B-4201 [1] NUT-FULL (1/4-28-THD)  
4. 9M-4704 [1] BOLT (8-32X1-IN)  
5. 8L-4154 [1] COLLAR-LOAD STOP  
6. 2N-4386 [1] COVER  
7. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
  1B-4330 [2] NUT (1/4-20-THD)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 6L-1597 [2] GASKET  
9. 2P-8669 [1] GASKET  
10. 2W-1491 [1] LEVER-CONTROL  
11. 9M-9788 [1] PLUNGER  
12. 7M-7316 [1] SPRING  
13. 5H-1351 [1] PIN-SPRING  
14. 2P-8679 [1] STRAINER AS (FUEL)  
15. 2P-8697 [1] GASKET  
16. 6N-3504 [1] SEAT-GOVERNOR SPRING  
17. 4N-1870 [1] GASKET-HOUSING  
18. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
19. 5M-6214 [1] PLUG (1/8-27 PTF)  
20. 1N-4519 Y [1] PLATE GP-GOVERNOR ADAPTER  
21. 6N-9040 [1] DRIVE AS-FLEXIBLE  
  6D-9953 [1] PIN-SPRING  
  9N-2428 [1] RIVET  
22. 6N-4158 [1] RING-GOVERNOR DRIVE  
23. 6N-4164 [1] SPRING  
24. 6N-4156 [1] RING-RETAINING  
25. 8H-9181 [1] SPRING-BUMPER  
26. 061-6708 [1] RING-RETAINING  
27. 4W-7654 C [1] BOLT (1/4-28X1.25-IN)  
28. 6N-8793 [1] SPRING  
29. 5L-8991 [1] GASKET-COVER  
30. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
31. 9N-3363 [1] HOUSING AS-GOVERNOR  
32. 8S-0134 [1] BUSHING  
33. 8M-8403 [1] SPRING-GUIDE  
34. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
35. 9S-0798 [1] BUSHING  
36. 8T-2604 C [2] SEAL-LIP TYPE  
37. 8L-4308 [1] BOLT (5/16-18X2.75-IN)  
38. 9M-1974 C [5] WASHER-HARD (8.8X16X2-MM THK)  
39. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
40. 2P-8707 [1] PLATE AS-GOVERNOR  
41. 8L-4175 [1] DOWEL  
42. 0S-1594 [1] BOLT (3/8-16X1-IN)  
43. 1D-4540 [3] BOLT (5/16-18X2.75-IN)  
44. 1N-4656 C [1] SHAFT  
45. 9N-1917 [1] COVER AS  
46. 3P-0009 [1] INSULATOR  
47. 9N-1916 [1] LEVER-SHUTOFF  
48. 5M-6228 [1] BEARING AS-NEEDLE  
49. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
50. 9N-2165 [1] LEVER-SOLENOID  
51. 1S-7336 [2] LOCK-BOLT  
52. 0S-1614 [2] BOLT (1/4-20X0.5-IN)  
53. 5P-0796 [2] SEAL-LIP TYPE  
54. 4N-0951 [1] SHAFT-SHUTOFF  
55. 1S-7984 [1] BUSHING  
56. 1K-4703 [1] WASHER (13.1X22.2X1.6-MM THK)  
57. 9N-3324 [1] SCREW-ADJUSTMENT (HI-IDLE)  
58. 2J-0157 [2] SEAL-O-RING  
59. 8N-3154 [1] SCREW AS-ADJUSTMENT  
  9S-4980 [1] SCREW-ADJUSTMENT (LO-IDLE)  
60. 2W-7498 [1] SLEEVE-DETENT  
61. 4H-1641 [1] PIN-SPRING  
62. 9S-4982 [1] SPRING  
63. 8H-9204 [2] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980479
 

1W-1636: GOVERNOR GP

1W-1636 GOVERNOR GP
WOODWARD
PART OF 1W-1637 GOVERNOR GP
i00355711 SEBP1098
1W1636 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
2. 7N-6052 [1] SPRING AS-SPEED  
3. 1N-3316 [3] SEAL-OIL  
4. 6L-3996 [1] SEAT-SPRING  
5. 3N-5723 [1] SPRING  
6. 2F-2293 [1] GASKET-COVER  
7. 7N-4533 [1] BEARING-THRUST  
8. 3N-5729 [1] SEAT-SPRING  
9. 5N-3885 [1] LINK-SPEED DROOP  
10. 5N-3890 [1] SHAFT-SPEED ADJUSTMENT  
11. 5N-4112 [1] SPRING-TORSION  
12. 5N-3915 [1] LINK AS  
13. 2N-1894 [1] PIN-SPRING  
14. 6L-9838 [1] SHAFT-TERMINAL  
15. 6N-7530 [1] PIN-PIVOT  
16. 1W-4892 [1] LEVER AS  
17. 6L-4007 [1] VALVE AS-RELIEF  
18. 8N-2276 [1] STOP AS-POWER PISTON  
19. 3N-5728 [1] STRUT-SERVO  
20. 3N-5727 [1] PISTON-POWER  
21. 5N-3939 [1] CASE AS  
22. 6L-3990 [2] SPRING-BUFFER  
23. 6L-3997 [1] PISTON-BUFFER  
24. 5N-7439 [1] BASE AS-GOVERNOR  
25. 6L-3995 [1] SEAT-SPRING  
26. 6L-3983 [1] GEAR-IDLER (10-TEETH)  
27. 6L-4003 [1] BUSHING  
28. 6L-3994 [1] PLUNGER-VALVE  
29. 7N-0001 [1] BALL HEAD AS  
30. 5N-3909 [1] CLUTCH AS  
31. 5N-3889 [1] VALVE-NEEDLE  
32. 5N-3886 [1] SCREW (10-32X1.5-IN)  
33. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
34. 6F-3480 [1] SLEEVE AS-ADJUSTMENT  
35. 5N-3887 [1] PIN  
36. 5N-3891 [3] WASHER  
37. 5N-3883 [1] SCREW-DROOP ADJUSTMENT  
  4B-2043 [1] NUT (8-32-THD)  
38. 8N-3836 [1] SCREW-BRACKET  
39. 5N-3911 [1] SHAFT AS-DROOP  
40. 5N-3913 [1] LEVER  
41. 5N-3916 [1] SLEEVE AS-ADJUSTMENT  
42. 5N-3892 [1] BRACKET  
43. 5N-4111 [1] SPACER (0.192X0.249X0.137-IN THK)(.193X.249X.139-MM THK)  
44. 6L-3992 [1] BUSHING-TERMINAL  
45. 1W-4910 [1] COVER AS-MOTOR  
  1W-4911 [1] COVER  
46. 8N-7848 [1] MOTOR AS  
47. 8N-7847 [1] BOOT  
 

Information:

Engine News
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems
1980/02/27
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Single Connector Prevents Leakage From Fuel Filter Lines Groups
1981/07/15
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
New Washers Permit Locks To Hold Better
1982/02/10
New Fuel Nozzle Adapter Assembly Used
1982/02/24
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Fuel Nozzle Adapters Used
1983/05/25
New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage
1983/07/06
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used
1985/07/01
Changes To Fuel Systems
1985/09/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/05/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Additional Clamp Used In Fuel Injections Lines Groups{1252}
1994/08/01
New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/16
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control
1977/08/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
SOLAS Requirements for Fuel Lines {1274}
2003/12/01
Special Instruction
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Service Letter-NACD
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Australia
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-CFEL
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-CSARL
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Americas
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Brazil
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Engines With Capsule - Type Nozzles
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Earlier 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Later 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Lines
3412 INDUSTRIAL AND MARINE ENGINES
Duplex Fuel Filters
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Primary Fuel Filter
3412 INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Fuel Injection Nozzles and Adapters
3408C and 3412C Marine Engines
Service Letter-China
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-Asia
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Service Letter-APD
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Installing A Fuel Line Bracket On 3412 Commercial Engines
Disassembly and Assembly
Fuel Filter & Fuel Filter Base
3408C & 3412C MARINE ENGINES
Fuel Ratio Control
3408C & 3412C MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3408C & 3412C MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3408C & 3412C MARINE ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C MARINE ENGINES
Direct Injection Adapters
3408C & 3412C MARINE ENGINES
Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles & Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES
Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
1981/07/06
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Washers Permit Locks To Hold Better{1252}
1982/01/25
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Caterpillar Parts SIS Catalog 3412 :

DRIVE GP-TACHOMETER
9N-0016 DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
7N-2419 DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
6N-8791 DRIVE GP-TACHOMETER
DRIVE GP-GOVERNOR & FUEL PUMP
9Y-5457 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
8N-8996 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6N-8171 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
9Y-3336 FASTENER GP-FUEL INJ PUMP
FASTENER GP-GOVERNOR
4N-9792 FASTENER GP-GOVERNOR
FILTER GP-FUEL
4N-6925 FILTER GP-FUEL
FILTER GP-FUEL
6N-6258 FILTER GP-FUEL
FILTER GP-FUEL
6N-6289 FILTER GP-FUEL
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
GOVERNOR GP
1N-4633 GOVERNOR GP
GOVERNOR GP
1N-4633 GOVERNOR GP

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.