AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-6300 LINES GP-FUEL INJECTION S/N 60M3255-4749 PART OF 2W-8065, 4W-9008 LINES GP-FUEL INJECTION Type 2 3412


FUEL SYSTEM
LINES GP-FUEL INJECTION
FILTER GP-FUEL
LINES GP-FUEL
GOVERNOR GP

MARINE ENGINE 3412 MARINE ENGINE 60M
 3412B Marine Engine 60M00001-05160 SEBP1098 3412 60M   (1976)

FUEL SYSTEM

LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-6299 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-6300 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-6300 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-0128 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-0128 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-4200 LINES GP-FUEL INJECTION
 

#SEBP10980540
 

7C-6300: LINES GP-FUEL INJECTION

7C-6300 LINES GP-FUEL INJECTION
S/N 60M3255-4749
PART OF 2W-8065, 4W-9008 LINES GP-FUEL INJECTION
Type 2
i00409076 SEBP1098
7C6300 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7808 [1] LINE AS-FUEL INJECTION (NO. 8)  
2. 4P-7810 [1] LINE AS-FUEL INJECTION (NO. 10)  
3. 4P-7802 [1] LINE AS-FUEL INJECTION (NO. 2)  
4. 4P-7804 [1] LINE AS-FUEL INJECTION (NO. 4)  
5. 4P-7812 [1] LINE AS-FUEL INJECTION (NO. 12)  
6. 4P-7806 [1] LINE AS-FUEL INJECTION (NO. 6)  
7. 1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
8. 1W-9169 [1] CLAMP-FUEL LINE (THREADED)  
9. 5P-4939 [5] SCREW-MACHINE (10-24X15.88-IN)  
10. 4P-3677 C [1] CLAMP-FUEL LINE (NON-THREADED)  
11. 4P-3678 C [1] CLAMP-FUEL LINE (THREADED)  
12. 7C-6525 [1] CLAMP-FUEL LINE (NON-THREADED)  
13. 7C-6589 [1] CLAMP-FUEL LINE (THREADED)  
14. 7C-6528 [1] BRACKET  
15. 9Y-3380 [1] BRACKET  
16. 9N-3388 [3] BOLT (10-24X0.75-IN)  
17. 7C-6591 C [2] CLAMP-FUEL LINE (THREADED)  
18. 7C-7747 C [2] CLAMP-FUEL LINE (NON-THREADED)  
19. 4P-7143 [1] PLATE  
20. 4P-4869 [1] CLAMP-FUEL LINE  
21. 4B-4274 [1] WASHER (5.5X13X1.2-MM THK)  
22. 4P-4871 [2] DAMPER-FUEL LINE  
23. 7M-9831 [1] SCREW-MACHINE (10-24X0.88-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980541
 

7W-0128: LINES GP-FUEL INJECTION

7W-0128 LINES GP-FUEL INJECTION
S/N 60M2238-5160
DOUBLE WALL
Type 1
FOR USE WITH @@@@@ 2W-8065@@@@@, @@@@@ 4W-9008@@@@@
AN ATTACHMENT
i00431048 SEBP1098
7W0128 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6451 [1] LINE AS-FUEL INJECTION (CYL NO. 1)(NO. 1)  
2. 1W-6452 [1] LINE AS-FUEL INJECTION (CYL NO. 2)(NO. 2)  
3. 1W-6453 [1] LINE AS-FUEL INJECTION (CYL NO. 3)(NO. 3)  
4. 1W-6454 [1] LINE AS-FUEL INJECTION (CYL NO. 4)(NO. 4)  
5. 1W-6455 [1] LINE AS-FUEL INJECTION (CYL NO. 5)(NO. 5)  
6. 1W-6456 [1] LINE AS-FUEL INJECTION (CYL NO. 6)  
7. 1W-6457 [1] LINE AS-FUEL INJECTION (CYL NO. 7)(NO. 7)  
8. 1W-6458 [1] LINE AS-FUEL INJECTION (CYL NO. 8)(NO. 8)  
9. 1W-6459 [1] LINE AS-FUEL INJECTION (CYL NO. 9)(NO. 9)  
10. 1W-6460 [1] LINE AS-FUEL INJECTION (CYL NO. 10)(NO. 10)  
11. 1W-6461 [1] LINE AS-FUEL INJECTION (CYL NO. 11)(NO. 11)  
12. 1W-6462 [1] LINE AS-FUEL INJECTION (CYL NO. 12)(NO. 12)  
13. 5N-5370 [2] BRACKET-INJECTION LINE  
14. 5N-5369 [4] DAMPER-FUEL LINE  
15. 5N-5371 [2] CLAMP-FUEL LINE  
16. 2W-7884 [18] BOLT AS  
    (EACH INCLUDES)
  1A-9579 [1] BOLT (5/16-18X1.5-IN)  
  3B-4505 [1] LOCKWASHER  
  5P-6006 E TUBE-HEAT SHRINK (9.52-MM DIA)(1.95CM)  
17. 5N-5375 [6] DAMPER-FUEL LINE  
18. 5N-5376 [3] CLAMP-FUEL LINE  
19. 5N-5377 [3] CLAMP-FUEL LINE (TAPPED HOLES)  
20. 5N-5374 [1] CLAMP-FUEL LINE  
21. 5N-5373 [2] DAMPER-FUEL LINE  
22. 5N-5372 [1] CLAMP-FUEL LINE (TAPPED HOLES)  
23. 5N-5378 [2] DAMPER-FUEL LINE  
24. 5N-5379 [1] PLATE-FUEL INJ LINE  
25. 5N-5380 [1] CLAMP-FUEL LINE  
26. 5N-5365 [24] LOCK  
27. 5N-5956 [2] DAMPER-FUEL LINE  
28. 5N-5957 [1] CLAMP-FUEL LINE (TAPPED HOLE)  
29. 5N-5958 [1] CLAMP-FUEL LINE  
30. 1W-6777 [12] ADAPTER-INJECTION LINE  
31. 8M-4437 [12] SEAL-O-RING  
32. 6V-6579 [12] SEAL  
33. 2W-2500 [12] WASHER-BEVEL  
34. 5P-9267 [12] SEAL  
35. 7W-0121 [12] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
36. 1B-5354 [12] NUT-FULL (5/16-18-THD)  
  7M-1599 [12] STUD-TAPERLOCK  
  9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
  E   ORDER BY THE CENTIMETER
 

#SEBP10980542
 

7W-0128: LINES GP-FUEL INJECTION

7W-0128 LINES GP-FUEL INJECTION
S/N 60M2238-5160
DOUBLE WALL
Type 2
FOR USE WITH @@@@@ 2W-8065@@@@@, @@@@@ 4W-9008@@@@@
AN ATTACHMENT
i00431050 SEBP1098
7W0128 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6451 [1] LINE AS-FUEL INJECTION (CYL NO. 1)  
2. 1W-6452 [1] LINE AS-FUEL INJECTION (CYL NO. 2)  
3. 1W-6453 [1] LINE AS-FUEL INJECTION (CYL NO. 3)  
4. 1W-6454 [1] LINE AS-FUEL INJECTION (CYL NO. 4)  
5. 1W-6455 [1] LINE AS-FUEL INJECTION (CYL NO. 5)  
6. 1W-6456 [1] LINE AS-FUEL INJECTION (CYL NO. 6)  
7. 1W-6457 [1] LINE AS-FUEL INJECTION (CYL NO. 7)  
8. 1W-6458 [1] LINE AS-FUEL INJECTION (CYL NO. 8)  
9. 1W-6459 [1] LINE AS-FUEL INJECTION (CYL NO. 9)  
10. 1W-6460 [1] LINE AS-FUEL INJECTION (CYL NO. 10)  
11. 1W-6461 [1] LINE AS-FUEL INJECTION (CYL NO. 11)  
12. 1W-6462 [1] LINE AS-FUEL INJECTION (CYL NO. 12)  
13. 5N-5370 [2] BRACKET-INJECTION LINE  
14. 5N-5369 [4] DAMPER-FUEL LINE  
15. 5N-5371 [2] CLAMP-FUEL LINE  
16. 2W-7884 [18] BOLT AS  
    (EACH INCLUDES)
  1A-9579 [1] BOLT (5/16-18X1.5-IN)  
  3B-4505 [1] LOCKWASHER  
17. 5N-5375 [6] DAMPER-FUEL LINE  
18. 5N-5376 [3] CLAMP-FUEL LINE  
19. 5N-5377 [3] CLAMP-FUEL LINE  
    (TAPPED HOLES)
20. 5N-5374 [1] CLAMP-FUEL LINE  
21. 5N-5373 [2] DAMPER-FUEL LINE  
22. 5N-5372 [1] CLAMP-FUEL LINE  
    (TAPPED HOLES)
23. 5N-5378 [2] DAMPER-FUEL LINE  
24. 5N-5379 [1] PLATE-FUEL INJ LINE  
25. 5N-5380 [1] CLAMP-FUEL LINE  
26. 5N-5365 [24] LOCK  
27. 5N-5956 [2] DAMPER-FUEL LINE  
28. 5N-5957 [1] CLAMP-FUEL LINE  
    (TAPPED HOLES)
29. 5N-5958 [1] CLAMP-FUEL LINE  
30. 1W-6777 [12] ADAPTER-INJECTION LINE  
31. 117-1385 [12] SEAL-O-RING  
32. 6V-6579 [12] SEAL  
33. 2W-2500 [12] WASHER-BEVEL  
34. 5P-9267 [12] SEAL  
35. 7C-5398 C [12] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
36. 1B-5354 [12] NUT-FULL (5/16-18-THD)  
  7M-1599 [12] STUD-TAPERLOCK  
  9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
  9N-2481 C [12] SPACER-SPECIAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980543
 

8N-4200: LINES GP-FUEL INJECTION

8N-4200 LINES GP-FUEL INJECTION
S/N 60M1524-2173; 60M2192-2572
i00108880 SEBP1098
8N4200 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2944 [4] PLUG  
2. 7N-0654 [24] BOLT AS  
    (EACH INCLUDES)
  5P-6007 D TUBE (0.1-M)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  031-2701 [1] BOLT-LOCKING (5/16-18X1.25-IN)  
3. 4L-1468 C [12] WASHER (0.33X0.86X0.06-IN THK)(1.5MM THK)  
4. 6N-4721 [2] BRACKET  
5. 7N-0661 [2] CLAMP  
6. 7N-0662 [4] DAMPER  
7. 7N-0669 [2] CLAMP  
8. 6N-0925 [2] CLAMP  
9. 7N-0813 [4] DAMPER  
10. 8S-3997 [1] CLAMP  
11. 7N-0663 [1] CLAMP  
12. 7N-0664 [2] DAMPER  
13. 8N-4207 [1] LINE AS-FUEL INJECTION (NO. 7)  
14. 8N-4209 [1] LINE AS-FUEL INJECTION (NO. 9)  
15. 8N-4205 [1] LINE AS-FUEL INJECTION (NO. 5)  
16. 8N-4201 [1] LINE AS-FUEL INJECTION (NO. 1)  
17. 6V-4314 C [1] SEAL-O-RING  
18. 1S-0004 [2] SEAL-O-RING  
19. 0S-1591 [4] BOLT (3/8-16X1.5-IN)  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  068-8438 [4] SPACER (11.12X19.05X7.9-MM THK)  
20. 8N-5111 [1] LINE AS-FUEL INJECTION (NO.11)  
21. 8N-4203 [1] LINE AS-FUEL INJECTION (NO. 3)  
22. 8N-4206 [1] LINE AS-FUEL INJECTION (NO. 6)  
23. 8N-4212 [1] LINE AS-FUEL INJECTION (NO.12)  
24. 8N-4202 [1] LINE AS-FUEL INJECTION (NO. 2)  
25. 8N-4210 [1] LINE AS-FUEL INJECTION (NO.10)  
26. 8N-4208 [1] LINE AS-FUEL INJECTION (NO. 8)  
27. 8N-4204 [1] LINE AS-FUEL INJECTION (NO. 4)  
28. 7N-0665 [1] CLAMP  
29. 6N-2751 [2] CLAMP  
30. 7N-0671 [4] DAMPER  
31. 7N-0814 [2] DAMPER  
32. 7N-0670 [1] BRACKET  
33. 7N-0666 [1] CLAMP (91.94MM LG)  
  6N-4720 [1] CLAMP (63.50MM LG)  
34. 1B-5354 [12] NUT-FULL (5/16-18-THD)  
  9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
35. 4N-1797 [12] ADAPTER AS  
    (EACH INCLUDES)
36. 8M-4437 [1] SEAL-O-RING  
37. 9N-3970 [12] LINE AS-FUEL INJECTION  
  1H-1023 [12] SEAL-O-RING  
38. 5P-6900 C [48] BOLT-12 POINT HEAD  
39. 2W-3390 C [12] BODY AS-FUEL INJ VALVE  
    (EACH INCLUDES)
40. 5P-2060 [1] SEAL-SECTION  
41. 4N-1292 [12] LOCK-ADAPTER  
42. 9L-6884 [12] NOZZLE AS-FUEL VALVE  
43. 9N-2481 [12] SPACER-SPECIAL  
44. 4W-5717 C [24] CLAMP-NOZZLE  
45. 4W-5718 C [12] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP10980544
 

6N-3212: MOUNTING GP-PRIMARY FUEL FLTR

6N-3212 MOUNTING GP-PRIMARY FUEL FLTR
CANNOT BE USED WITH DUPLEX FUEL FILTER
AN ATTACHMENT
i00407454 SEBP1098
6N3212 MOUNTING GP-PRIMARY FUEL FLTR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 003-2143 C [1] ELBOW  
2. 0S-1591 C [2] BOLT (3/8-16X1.5-IN)  
    -OR-
  1A-2029 [2] BOLT (3/8-16X1.125-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2N-8037 [1] ELBOW  
4. 7N-3761 CI [1] HOSE AS  
5. 8L-3282 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP10980545
 

4W-7020: NOZZLE AS-FUEL VALVE

4W-7020 NOZZLE AS-FUEL VALVE
DIRECT INJECTION
AN ATTACHMENT
i00380100 SEBP1098
4W7020 NOZZLE AS-FUEL VALVE Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP (3/8-IN OD)  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 9X-2836 [1] SCREW-BUTTON HEAD  
4. 114-3362 [1] SEAL-O-RING  
5. 271-2489 [1] SEAL-WASHER  
6. [1] TIP AS-FUEL INJECTOR  
 

#SEBP10980546
 

6N-1947: PISTON GP-GOVERNOR SERVO

6N-1947 PISTON GP-GOVERNOR SERVO
S/N 60M1-2531
PART OF 4N-1894 GOVERNOR GP, 1N-4519, 9N-3684 PLATE GP-GOVERNOR ADAPTER
i00156196 SEBP1098
6N1947 PISTON GP-GOVERNOR SERVO Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1807 [1] CYLINDER-SERVO  
2. 5P-9757 C [1] SEAL-O-RING  
3. 8N-6983 C [1] SLEEVE  
4. 8N-6979 C [1] PISTON & VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980547
 

6N-5314: PISTON GP-GOVERNOR SERVO

6N-5314 PISTON GP-GOVERNOR SERVO
PART OF 4W-3501, 8N-7525 PLATE GP-GOVERNOR ADAPTER
i00108127 SEBP1098
6N5314 PISTON GP-GOVERNOR SERVO Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1807 [1] CYLINDER-SERVO  
2. 5P-9757 C [1] SEAL-O-RING  
3. 8N-6983 [1] SLEEVE  
4. 8N-6978 [1] PISTON & VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10980548
 

1N-4519: PLATE GP-GOVERNOR ADAPTER

1N-4519 PLATE GP-GOVERNOR ADAPTER
S/N 60M1528-2531
PART OF 1N-4633 GOVERNOR GP
Type 1
i00974045 SEBP1098
1N4519 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT-LOAD STOP  
2. 6N-8629 [1] SEAT-SPRING  
3. 4N-3887 [1] RING-RETAINING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 [1] RACE-THRUST BEARING  
6. 7M-7219 [1] BEARING-THRUST  
7. 3K-0810 [1] RING-LOCK  
8. 6N-7818 [1] RING-LOCK  
9. 5P-5601 [2] SEAL-O-RING  
10. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
11. 7N-4554 [1] PLATE AS-ADAPTER  
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL-HOLLOW  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BUSHING  
15. 2A-5328 [3] LOCK  
16. 7L-6210 [1] BOLT-LOCATING (5/16-18X1-IN)  
17. 6N-1947 Y [1] PISTON GP-GOVERNOR SERVO  
18. 9N-3323 [1] BRACKET AS-CONTROL  
  2S-7316 [1] DOWEL  
19. 7N-4555 [1] LEVER-RACK CONTROL  
20. 7N-2351 [1] PIN-CONTROL  
21. 0S-1618 [2] BOLT (5/16-18X1-IN)  
22. 8M-6393 [1] RING-RETAINING  
23. 6N-4157 [1] GEAR AS  
  7L-4993 [2] DOWEL  
24. 1N-4518 [1] WEIGHT AS-GOVERNOR  
25. 1S-5440 [2] DOWEL  
26. 6N-1312 [2] WEIGHT-GOVERNOR  
27. 2S-0007 [1] SLEEVE-PILOT  
28. 9M-6302 [2] WASHER-SPECIAL  
  9M-6303 [1] SPRING  
29. 6N-8195 [1] RACE-THRUST BEARING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10980549
 

1N-4519: PLATE GP-GOVERNOR ADAPTER

1N-4519 PLATE GP-GOVERNOR ADAPTER
S/N 60M1528-2531
PART OF 1N-4633 GOVERNOR GP
Type 2
i00352626 SEBP1098
1N4519 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT-LOAD STOP  
2. 1W-4642 C [1] RISER-GOVERNOR  
3. 1W-4640 C [1] SEAT-SPRING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 [1] RACE-THRUST BEARING  
6. 7M-7219 [1] BEARING-THRUST  
7. 3K-0810 [1] RING-LOCK  
8. 6N-7818 [1] RING-LOCK  
9. 5P-5601 [2] SEAL-O-RING  
10. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
11. 7N-4554 [1] PLATE AS-ADAPTER  
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL-HOLLOW  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BUSHING  
15. 2A-5328 [3] LOCK  
16. 7L-6210 [1] BOLT-LOCATING (5/16-18X1-IN)  
17. 6N-1947 Y [1] PISTON GP-GOVERNOR SERVO  
18. 9N-3323 [1] BRACKET AS-CONTROL  
  2S-7316 [1] DOWEL  
19. 7N-4555 [1] LEVER-RACK CONTROL  
20. 7N-2351 [1] PIN-CONTROL  
21. 0S-1618 [2] BOLT (5/16-18X1-IN)  
22. 8M-6393 [1] RING-RETAINING  
23. 6N-4157 [1] GEAR AS (42 TEETH)  
  1W-6448 C [2] DOWEL  
24. 1N-4518 [1] WEIGHT AS-GOVERNOR  
25. 1S-5440 [2] DOWEL  
26. 6N-1312 [2] WEIGHT-GOVERNOR  
27. 2S-0007 [1] SLEEVE-PILOT  
28. 9M-6302 [2] WASHER-SPECIAL  
  9M-6303 [1] SPRING  
29. 6N-8195 [1] RACE-THRUST BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems
1980/02/27
New Washers Permit Locks To Hold Better
1982/02/10
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage
1983/07/06
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07
Changes To Fuel Systems
1985/09/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/05/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Additional Clamp Used In Fuel Injections Lines Groups{1252}
1994/08/01
New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/16
Improved Procedure to Install Double Wall Fuel Lines {1252, 1254}
2008/07/07
A New Procedure Is Used to Secure the Fuel Injection Lines Group on Certain 3412, 3412C, and 3412D Commercial Engines {1252, 1254}
2012/07/19
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Installation Of 5N5340, 2W3536 And 2W3537 Fuel Injection Lines Groups And 2W5100 Fuel Lines Drain Group{1250, 1252}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Inspection, Adjustment, and Replacement Procedure for a Double Wall Fuel Line Leak on Certain 3412 Marine Genset Engines{1252, 1254}
Inspection, Adjustment, and Replacement Procedure for a Double Wall Fuel Line Leak on Certain 3412 Marine Genset Engines{1252, 1254}
Specifications
Engines With Capsule - Type Nozzles
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Earlier 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzle And Adapter (Later 7000 Series Nozzle Assembly)
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Lines
3412 INDUSTRIAL AND MARINE ENGINES
Fuel Injection Lines
3408C and 3412C Marine Engines
Fuel Injection Lines
3408C and 3412C Marine Engines
Fuel Injection Lines
3408C and 3412C Marine Engines
Service Letter-China
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Product Support Program For Replacing The Fuel Lines And/Or Brackets On Certain 3412 Generator Set, Industrial, And Marine Engines
Disassembly and Assembly
Fuel Injection Lines
3408C & 3412C MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3408C & 3412C MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3408C & 3412C MARINE ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C MARINE ENGINES
Fuel Injection Lines
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3412 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles & Adapters (Later 7000 Series)
3412 INDUSTRIAL & MARINE ENGINES
Direct Injection Adapters
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Washers Permit Locks To Hold Better{1252}
1982/01/25
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Changes To Fuel Systems {1250,1251,1252,1253,1254,1100}
1985/09/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3412 :

LINES GP-FUEL INJECTION
7C-6300 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-6299 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-0350 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-0350 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-0349 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
5N-5340 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-9008 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-9008 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-0128 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-0128 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-4200 LINES GP-FUEL INJECTION
MOUNTING GP-PRIMARY FUEL FLTR
6N-3212 MOUNTING GP-PRIMARY FUEL FLTR
NOZZLE AS-FUEL VALVE
4W-7020 NOZZLE AS-FUEL VALVE
PISTON GP-GOVERNOR SERVO
6N-1947 PISTON GP-GOVERNOR SERVO
PISTON GP-GOVERNOR SERVO
6N-5314 PISTON GP-GOVERNOR SERVO
PLATE GP-GOVERNOR ADAPTER
1N-4519 PLATE GP-GOVERNOR ADAPTER

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.