ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPELECTRONICS GP
CONTACTOR GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
#SEBP10980700
4N-7556: LUBRICATOR GP-AIR MOTOR
4N-7556 LUBRICATOR GP-AIR MOTOR
PART OF 5N-8744, 5N-8745, 6N-4559, 8N-0580, 8N-0581 STARTING MOTOR GP-AIR
AN ATTACHMENT
PART OF 5N-8744, 5N-8745, 6N-4559, 8N-0580, 8N-0581 STARTING MOTOR GP-AIR
AN ATTACHMENT
For full view, you need register
#SEBP10980701
274-8068: MODULE GP-INTERFACE
274-8068 MODULE GP-INTERFACE
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 466-0772 F | [1] | SOFTWARE GP-ELECTRONIC | ||
| F | NOT SHOWN | |||
#SEBP10980702
275-2076: MODULE GP-INTERFACE
275-2076 MODULE GP-INTERFACE
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-8068 | [1] | MODULE GP-INTERFACE |
#SEBP10980703
3N-8903: MOUNTING GP-CONTACTOR
3N-8903 MOUNTING GP-CONTACTOR
PART OF 3N-8904 CONTACTOR GP-ALARM
AN ATTACHMENT
PART OF 3N-8904 CONTACTOR GP-ALARM
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-4746 B | [1] | ADAPTER | |
| 2M-9780 BC | [1] | SEAL-O-RING | ||
| 2. | 4M-5317 BC | [1] | BUSHING-REDUCER | |
| 3. | 3N-4411 CI | [1] | HOSE AS | |
| 4. | 4F-8184 | [1] | BUSHING-TERMINAL | |
| 5. | 0S-1613 | [3] | BOLT (1/4-20X0.375-IN) | |
| 3B-4504 | [3] | LOCKWASHER | ||
| 6. | 3N-6245 | [1] | PLATE-MOUNTING | |
| 7. | 3B-1915 BC | [2] | BOLT (3/8-16X1.375-IN) | |
| 5M-2894 BC | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6B-0933 BC | [2] | SPACER (10.31X19.05X6.35-MM THK) | ||
| 8. | 2N-1287 C | [1] | ELBOW-FLARED | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP10980704
3N-8903: MOUNTING GP-CONTACTOR
3N-8903 MOUNTING GP-CONTACTOR
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-4746 B | [1] | ADAPTER | |
| 2M-9780 B | [1] | SEAL-O-RING | ||
| 2. | 1F-9369 C | [1] | TEE-SERVICE (FOR USE WITH COOLANT FILTER) | |
| 3. | 3N-4411 I | [1] | HOSE AS | |
| 4. | 2N-1287 | [1] | ELBOW-FLARED | |
| 5. | 0S-1613 | [3] | BOLT (1/4-20X0.375-IN) | |
| 5P-0537 C | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 6. | 3N-6245 | [1] | PLATE-MOUNTING | |
| 7. | 3B-1915 B | [2] | BOLT (3/8-16X1.375-IN) | |
| 5M-2894 B | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6B-0933 B | [2] | SPACER (10.31X19.05X6.35-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP10980705
4W-6332: MOUNTING GP-CONTACTOR
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2539 I | [1] | HOSE AS | |
| 2. | 2N-1287 | [1] | ELBOW-FLARED | |
| 3. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 4. | 3J-5390 | [1] | PLUG (3/8-18-THD) | |
| 5. | 6B-7639 | [1] | TEE-SERVICE | |
| 6. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 1D-4716 | [2] | NUT-FULL (5/16-18-THD) | ||
| 7. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 1D-4717 | [4] | NUT (3/8-16-THD) | ||
| 8. | 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 10. | 4W-6331 | [1] | SUPPORT AS | |
| 11. | 3J-7352 | [1] | CONNECTOR | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 12. | 7B-8167 | [4] | BOLT (1/4-20X1.625-IN) | |
| 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 1B-4330 | [4] | NUT (1/4-20-THD) | ||
| 13. | 4W-7544 | [1] | PLATE | |
| 14. | 5P-9287 | [4] | WASHER-HARD (7.2X32X2-MM THK) | |
| 15. | 0S-1576 | [1] | BOLT (5/8-18X2-IN) | |
| 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 16. | 7W-0401 | [1] | PLATE | |
| 17. | 2A-0047 | [1] | WASHER (0.656X1.125X0.688-IN THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP10980706
4W-6332: MOUNTING GP-CONTACTOR
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2539 I | [1] | HOSE AS | |
| 2. | 2N-1287 | [1] | ELBOW-FLARED | |
| 3. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 4. | 6K-6967 C | [1] | ADAPTER-PIPE | |
| 5. | 6V-8185 | [5] | NUT (1/4-20-THD) | |
| 6. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 6V-8189 | [2] | NUT (5/16-18-THD) | ||
| 7. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 6V-8801 | [4] | NUT (3/8-16-THD) | ||
| 8. | 8T-4896 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 5S-7383 | [2] | BOLT (3/8-16X1.75-IN) | |
| 10. | 4W-6331 | [1] | SUPPORT AS | |
| 11. | 3J-7352 | [1] | CONNECTOR | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 12. | 7X-3178 | [4] | BOLT (1/4-20X1.625-IN) | |
| 13. | 4W-7544 | [1] | PLATE | |
| 14. | 5P-9287 | [4] | WASHER-HARD (7.2X32X2-MM THK) | |
| 15. | 7X-3192 | [1] | BOLT (5/8-18X2-IN) | |
| 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 16. | 7W-6686 C | [1] | PLATE | |
| 17. | 2A-0047 | [1] | WASHER (0.656X1.125X0.688-IN THK) | |
| 18. | 1H-6936 | [1] | WIRE AS | |
| 19. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP10980707
4W-9580: MOUNTING GP-CONTACTOR
4W-9580 MOUNTING GP-CONTACTOR
JUNCTION BOX, PROVIDES MOUNTING GP FOR ELECTRIC SHUT-OFF ON RADIATOR COOLED MARINE ENGINES
Type 1
CANNOT BE USED WITH LH MOUNTED OIL FILTERS (STANDARD OR DUPLEX), LH MOUNTED COOLANT CONDITIONER OR HIGH CAPACITY OIL PAN
FOR USAGE REFER TO CHART @@@@@ 5N-8487@@@@@
AN ATTACHMENT
JUNCTION BOX, PROVIDES MOUNTING GP FOR ELECTRIC SHUT-OFF ON RADIATOR COOLED MARINE ENGINES
Type 1
CANNOT BE USED WITH LH MOUNTED OIL FILTERS (STANDARD OR DUPLEX), LH MOUNTED COOLANT CONDITIONER OR HIGH CAPACITY OIL PAN
FOR USAGE REFER TO CHART @@@@@ 5N-8487@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-2539 I | [1] | HOSE AS | |
| 2. | 2N-1287 | [1] | ELBOW-FLARED | |
| 3. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 4. | 3J-5390 | [1] | PLUG (3/8-18-THD) | |
| 5. | 6B-7639 | [1] | TEE-SERVICE | |
| 6. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 1D-4716 | [2] | NUT-FULL (5/16-18-THD) | ||
| 7. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 1D-4717 | [4] | NUT (3/8-16-THD) | ||
| 8. | 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 10. | 4W-9579 | [1] | SUPPORT AS | |
| 11. | 3J-7352 | [1] | CONNECTOR | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 12. | 7B-8167 | [4] | BOLT (1/4-20X1.625-IN) | |
| 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 1B-4330 | [4] | NUT (1/4-20-THD) | ||
| 13. | 4W-7544 | [1] | PLATE | |
| 14. | 5P-9287 | [4] | WASHER-HARD (7.2X32X2-MM THK) | |
| 15. | 1A-4273 | [1] | BOLT (5/8-18X1.25-IN) | |
| 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 16. | 4W-9581 | [1] | PLATE | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP10980708
4W-9580: MOUNTING GP-CONTACTOR
4W-9580 MOUNTING GP-CONTACTOR
JUNCTION BOX, PROVIDES MOUNTING GP FOR ELECTRIC SHUT-OFF ON RADIATOR COOLED MARINE ENGINES
Type 2
CANNOT BE USED WITH LH MOUNTED OIL FILTERS (STANDARD OR DUPLEX), LH MOUNTED COOLANT CONDITIONER OR HIGH CAPACITY OIL PAN
FOR USAGE REFER TO CHART @@@@@ 5N-8487@@@@@
AN ATTACHMENT
JUNCTION BOX, PROVIDES MOUNTING GP FOR ELECTRIC SHUT-OFF ON RADIATOR COOLED MARINE ENGINES
Type 2
CANNOT BE USED WITH LH MOUNTED OIL FILTERS (STANDARD OR DUPLEX), LH MOUNTED COOLANT CONDITIONER OR HIGH CAPACITY OIL PAN
FOR USAGE REFER TO CHART @@@@@ 5N-8487@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-6936 C | [1] | WIRE AS | |
| 2. | 2A-0047 B | [1] | WASHER (0.656X1.125X0.688-IN THK) | |
| 3. | 2W-8604 C | [4] | WASHER (6.5X35X1.5-MM THK) | |
| 4. | 4W-7544 | [1] | PLATE | |
| 5. | 172-4288 I | [1] | HOSE AS | |
| 6. | 7W-6662 C | [1] | SUPPORT AS | |
| 7. | 7W-6663 C | [1] | PLATE | |
| 8. | 2N-1287 | [1] | ELBOW-FLARED | |
| 9. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 10. | 3J-7352 | [1] | CONNECTOR | |
| 11. | 3J-7354 | [1] | SEAL-O-RING | |
| 12. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 13. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 14. | 5M-6214 C | [1] | PLUG (1/8-27 PTF) | |
| 15. | 5P-2675 | [4] | BOLT (1/4-20X1.75-IN) | |
| 16. | 5P-3422 C | [1] | TEE-PIPE | |
| 17. | 6K-6967 C | [1] | ADAPTER-PIPE | |
| 18. | 6V-8185 | [5] | NUT (1/4-20-THD) | |
| 19. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 20. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 21. | 7X-3192 B | [1] | BOLT (5/8-18X2-IN) | |
| 22. | 7X-3352 B | [1] | BOLT (5/8-18X1.5-IN) | |
| 23. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 24. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 25. | 8T-4205 C | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 8T-4896 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP10980709
5N-8952: MOUNTING GP-CONTACTOR
For full view, you need register
Parts for your 3412 MARINE ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4S-8264 C | [8] | RIVET-POP | |
| 2. | 8N-9300 | [4] | MOUNT AS | |
| 3. | 3K-8106 | [4] | SCREW-MACHINE (8-32X1-IN) | |
| 4B-2043 | [4] | NUT (8-32-THD) | ||
| 4B-4863 | [8] | WASHER (4.7X11X1.2-MM THK) | ||
| 4. | 4F-7957 | [2] | BOLT (1/4-20X0.875-IN) | |
| 9S-8750 C | [2] | NUT-FULL (1/4-20-THD) | ||
| 9S-8750 C | [2] | NUT-FULL (1/4-20-THD) | ||
| 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 5. | 5N-7192 | [1] | PLATE | |
| 6. | 0S-1591 B | [2] | BOLT (3/8-16X1.5-IN) | |
| 1A-2029 B | [2] | BOLT (3/8-16X1.125-IN) | ||
| 7. | 0S-1585 B | [2] | BOLT (1/2-13X1.5-IN) | |
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8. | 5N-7191 | [1] | PLATE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
General Service Information
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Hydraulic Starting Motor<BR> 7L8657 (American Bosch Model CMD3A111)
3412 INDUSTRIAL AND MARINE ENGINES
3412 INDUSTRIAL AND MARINE ENGINES
Charging Pump For Hydraulic Starter<BR> 6L8719 (American Bosch Part Number RPA300363)
3412 INDUSTRIAL AND MARINE ENGINES
3412 INDUSTRIAL AND MARINE ENGINES
Hand Pump For Hydraulic Starter<BR> 2L8342 (American Bosch Part Number HPA300118)
3412 INDUSTRIAL AND MARINE ENGINES
3412 INDUSTRIAL AND MARINE ENGINES
Pressure Accumulator For Hydraulic Starter<BR> 3N9503 (American Bosch Part Number ACC30A231)
3412 INDUSTRIAL AND MARINE ENGINES
3412 INDUSTRIAL AND MARINE ENGINES
Systems Operation
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
37-MT, 41-MT, and 42-MT Series Starting Motors
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 3412 :
Truck sale:
95,720
96,795
93,569
60,000
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
159,600
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY