AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N3706 TURBOCHARGER OIL LINES GROUP For Direct Injection Turbocharged Marine Version Engine 3412 ENGINE - MACHINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL

ENGINE - MACHINE 3412 ENGINE - MACHINE 38S
 3412 INDUSTRIAL ENGINE 38S00001-13235 SEBP1101 3412 38S   (2018)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
6N-7720 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
6N-7734 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-3706 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
6N-7970 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-6248 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
8N-8377 LINES GP-TURBOCHARGER OIL
 

#SEBP11010250
 

4N-3706: LINES GP-TURBOCHARGER OIL

4N3706 TURBOCHARGER OIL LINES GROUP
For Direct Injection Turbocharged Marine Version Engine
c344455 SEBP1101
4N3706 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-8513 [1] CLIP  
2. 0L-1143 [1] BOLT  
3. 1D-4717 [2] NUT  
4. 5M-2894 [3] WASHER  
5. 4N-6161 [1] TUBE AS-OIL SUPPLEMENTARY  
6. 1S-6595 [1] GASKET  
7. 0S-1571 [2] BOLT  
8. 1A-2029 [2] BOLT  
9. 1S-4810 [1] GASKET-OIL DRAIN  
10. 6N-8198 [1] TUBE AS  
11. 9L-6924 [1] GASKET  
12. 9M-4849 C [1] SEAL-O-RING  
13. 4N-6146 [1] ELBOW  
14. 6M-7476 [1] ELBOW  
15. 2M-9780 [1] SEAL-O-RING  
16. 6F-7012 [2] STUD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11010251
 

6N-7970: LINES GP-TURBOCHARGER OIL

6N7970 TURBOCHARGER OIL LINES GROUP--WATERCOOLED TURBINE HOUSING
For Precombustion Chambered Turbocharged Aftercooled Marine Version
Engine
c344451 SEBP1101
6N7970 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [2] BOLT  
2. 1S-6595 [1] GASKET  
3. 6N-7971 [1] TUBE AS-OIL SUPPLY  
4. 8F-8513 [1] CLIP  
5. 0L-1143 [1] BOLT  
6. 5M-2894 [3] WASHER  
7. 6M-7476 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
8. 6F-7012 [2] STUD  
  1D-4717 [2] NUT  
9. 9L-6924 [1] GASKET  
10. 4N-6146 [1] ELBOW  
11. 9M-4849 C [1] SEAL-O-RING  
12. 6N-7853 [1] TUBE AS-OIL DRAIN  
13. 1A-2029 [2] BOLT  
14. 1S-4810 C [1] GASKET-OIL DRAIN  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11010252
 

1W-6248: LINES GP-TURBOCHARGER OIL

1W6248 TURBOCHARGER OIL LINES GROUP
Serial No. 38S8932-Up. For Light Duty Commercial and Pleasure Craft Use
ALSO AN ATTACHMENT
c303457 SEBP1101
1W6248 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6250 [1] TUBE AS-OIL SUPPLY  
2. 1S-6595 [1] GASKET  
3. 0S-1571 [2] BOLT  
4. 6M-7476 [1] ELBOW  
5. 2M-9780 [1] SEAL-O-RING  
6. 8F-8513 [1] CLIP  
7. 5M-2894 [3] WASHER  
8. 6N-7853 [1] TUBE AS-OIL DRAIN  
9. 1S-4810 [1] GASKET-OIL DRAIN  
10. 1A-2029 [2] BOLT  
11. 4N-6146 [1] ELBOW  
12. 1D-4717 [2] NUT  
13. 9H-6067 [1] SEAL-O-RING  
14. 9L-6924 [1] GASKET  
15. 6F-7012 [2] STUD  
16. 0L-1143 [1] BOLT  
 

#SEBP11010253
 

8N-8377: LINES GP-TURBOCHARGER OIL

8N8377 TURBOCHARGER OIL LINES GROUP
c300648 SEBP1101
8N8377 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-3243 [2] CLIP  
2. 0L-1351 [2] BOLT  
3. 1D-4717 [5] NUT  
4. 5M-2894 [9] WASHER (SMALL)  
5. 6N-7851 [1] TUBE AS  
6. 1S-6595 [1] GASKET  
7. 0S-1571 [2] BOLT  
8. 1A-2029 [2] BOLT  
9. 1S-4810 [1] GASKET-OIL DRAIN  
10. 6N-8198 [1] TUBE AS  
11. 4N-6146 [1] ELBOW  
  9L-6924 [1] GASKET  
12. 9H-6067 [1] SEAL-O-RING  
13. 6F-7012 [2] STUD  
14. 8N-2102 [1] SHIELD AS-HEAT  
15. 0S-1588 [1] BOLT  
16. 6M-7476 [1] ELBOW  
17. 2M-9780 [1] SEAL-O-RING  
18. 3L-9689 [2] WASHER (LARGE)  
19. 9L-1321 [1] STUD-TAPERLOCK  
  2N-2766 [1] LOCKNUT  
20. 6H-7127 [1] LUG  
21. 0S-0509 [1] BOLT  
22. 8N-8390 [1] BRACKET  
 

#SEBP11010254
 

6N-4578: OIL PUMP GROUP

6N4578 OIL PUMP GROUP
c157848 SEBP1101
6N4578 OIL PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. C [1] SPACER ASSEM.  
    (Includes)
2. 4N-5341 [2] BEARING  
3. 4N-5029 C [2] GEAR (8 teeth)  
4. 4N-0587 C [1] BODY ASSEM.  
    (Includes)
5. 4N-5274 [2] BEARING  
6. 9L-4784 C [2] SPACER BAR  
7. C [2] PLUG  
8. 7F-3425 C [4] BOLT  
9. 5M-2894 C [6] WASHER  
10. 5L-2727 C [2] SEAL  
11. 4N-8816 [1] SPACER  
12. 2S-2760 [1] SPRING  
13. 4N-0522 [1] RETAINER  
14. 1M-0644 [2] BOLT  
15. 6N-1931 [1] PLUNGER  
16. 4N-5313 C [1] SHAFT ASSEM. (8 teeth)  
17. 4N-5315 C [1] SHAFT ASSEM. (8 teeth)  
18. 4N-0513 C [1] BODY ASSEM.  
    (Includes)
19. 8M-8489 [2] DOWEL  
20. 4N-5342 [2] BEARING  
  C   INDICATES CHANGE
 

#SEBP11010255
 

4N-8734: PUMP GP-ENGINE OIL

4N8734 OIL PUMP GROUP*R
c210476 SEBP1101
4N8734 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-0644 [2] BOLT  
  5M-2894 [2] WASHER  
2. 4N-0522 [1] RETAINER  
3. 2S-2760 [1] SPRING  
4. 6N-1931 [1] PLUNGER  
5. 7N-0286 C [1] COVER ASSEM.  
    (Includes)
  8S-6509 [2] BEARING  
6. 4N-8816 [1] SPACER  
7. 4N-0513 C [1] BODY ASSEM.  
    (Includes)
  4N-5342 [2] BEARING  
8. 8M-8489 [2] DOWEL  
9. 0S-1571 C [4] BOLT  
10. 4N-5272 C [1] SHAFT ASSEM.  
11. 4N-5270 C [1] SHAFT ASSEM.  
  C   INDICATES CHANGE
 

#SEBP11010256
 

4N-2481: FASTENER GP-OIL PUMP MOUNTING

4N2481 OIL PUMP MOUNTING FASTENER GROUP
c210186 SEBP1101
4N2481 FASTENER GP-OIL PUMP MOUNTING Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [2] BOLT  
2. 0S-1590 [1] BOLT  
3. 5M-2894 C [3] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11010257
 

1W-0729: PUMP GP-ENGINE OIL

1W729 OIL PUMP GROUP
Serial No. 38S8890 to 38S11978 inclusive
c179217 SEBP1101
1W0729 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-0644 [2] BOLT  
  5M-2894 [2] WASHER  
2. 1N-3246 [1] RETAINER  
3. 2S-2760 [1] SPRING  
4. 6N-1931 [1] PLUNGER  
5. 7N-0286 [1] COVER ASSEM.  
    (Includes)
  8S-6511 [2] BEARING  
6. 4N-5270 [1] SHAFT ASSEM.  
7. 6N-1029 [1] BODY ASSEM.  
    (Includes)
  4N-5342 [2] BEARING  
8. 8M-8489 [2] DOWEL  
9. 0S-1571 [4] BOLT  
10. 4N-5272 [1] SHAFT ASSEM.  
 

#SEBP11010258
 

1W-0729: PUMP GP-ENGINE OIL

1W729 OIL PUMP GROUP
Serial No. 38S11979-Up
c300721 SEBP1101
1W0729 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1029 [1] BODY ASSEM.  
    (Includes)
  4N-5342 [2] BEARING  
2. 8M-8489 [2] DOWEL  
3. 1W-7239 C [1] SHAFT ASSEM.  
4. 7N-0286 [1] COVER ASSEM.  
    (Includes)
  8S-6509 [2] BEARING  
5. 0S-1571 [4] BOLT  
6. 1M-0644 [2] BOLT  
7. 5M-2894 [2] WASHER  
8. 1N-3246 [1] RETAINER  
9. 2S-2760 [1] SPRING  
10. 1W-7238 C [1] SHAFT ASSEM.  
11. 6N-1931 [1] PLUNGER  
  C   INDICATES CHANGE
 

#SEBP11010259
 

6N-1030: PUMP GP-ENGINE OIL

6N1030 OIL PUMP GROUP
Serial No. 38S1 To 38S11978 Inclusive
c210883 SEBP1101
6N1030 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3412 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-0644 [2] BOLT  
  5M-2894 [2] WASHER  
2. 4N-0522 [1] RETAINER  
3. 2S-2760 [1] SPRING  
4. 6N-1931 [1] PLUNGER  
5. 7N-0286 [1] COVER ASSEM.  
    (Includes)
  8S-6511 [2] BEARING  
6. 4N-8816 [1] SPACER  
7. 6N-1029 [1] BODY ASSEM.  
    (Includes)
  4N-5342 [2] BEARING  
8. 8M-8489 [2] DOWEL  
9. 0S-1571 [4] BOLT  
10. 4N-5272 [1] SHAFT ASSEM.  
11. 4N-5270 [1] SHAFT ASSEM.  
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
New Design Exhaust Gasket Used In Air Lines Group
1979/05/09
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel
1981/11/25
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/08/25
Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts
1983/04/27
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Tightening Procedure For Turbocharger Compressor Nut
1989/09/01
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups
1991/04/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Seal Used In Air Lines Group{1058}
1994/03/01
Coupling With A Slip Fit Now Used At Turbocharger Exhaust Outlet Instead Of Coupling With Piston Rings
1977/01/28
Adapter For Disassembly And Assembly Of Turbocharger Cartridge
1977/01/28
Clip Now Used To Hold Coolant Line For The Turbocharger
1977/03/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Turbine Housing For Turbocharger Is Stronger
1978/01/18
New Lifting Eye Group Used On 3412 Industrial Engines Equipped With Turbochargers
1978/04/19
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
New Vent Tube For Water Cooled Turbocharger
1978/08/30
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/07/04
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Inlet Air And Exhaust Lines
3408C & 3412C INDUSTRIAL ENGINES
Turbocharger
3408C & 3412C INDUSTRIAL ENGINES
Air An Exhaust Lines
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger Impeller Installation
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger T12
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger TW81
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger TV81
3412 INDUSTRIAL AND MARINE ENGINES
Turbocharger TW91
3412 INDUSTRIAL AND MARINE ENGINES
Turbochargers F452, F555 & F552
3412 INDUSTRIAL AND MARINE ENGINES
Turbochargers 4MFW and 4MF
3412 INDUSTRIAL AND MARINE ENGINES
Service Letter-China
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
REMANUFACTURED TURBOCHARGERS FOR 3412 INDUSTRIAL AND MARINE ENGINES AND VARIOUS 3412 EQUIPPED MACHINES
REMANUFACTURED TURBOCHARGERS FOR 3412 INDUSTRIAL AND MARINE ENGINES AND VARIOUS 3412 EQUIPPED MACHINES
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
Disassembly and Assembly
Turbochargers (3408 Engine)
3408C & 3412C INDUSTRIAL ENGINES
Turbocharger (Engine With Four Turbochargers)
3408C & 3412C INDUSTRIAL ENGINES
Turbocharger (Industrial Engine)
3412 INDUSTRIAL & MARINE ENGINES
Turbocharger (Marine Engine)
3412 INDUSTRIAL & MARINE ENGINES
Turbocharger (T12)
3412 INDUSTRIAL & MARINE ENGINES
Turbocharger
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel{1052}
1981/11/09
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Coupling With A Slip Fit Now Used At Turbocharger Exhaust Outlet Instead Of Coupling With Piston Rings{1061}
1977/01/24
Clip Now Used To Hold Coolant Line For The Turbocharger{1052,1380}
1977/02/28
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Turbine Housing For Turbocharger Is Stronger{1052}
1978/01/16
New Lifting Eye Group Used On 3412 Industrial Engines Equipped With Turbochargers{1101,1000}
1978/04/10
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
New Vent Tube For Water Cooled Turbocharger{1380,1052}
1978/09/04
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/04/30
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups{1052,1053,1056,7553}
1991/04/08
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Tube Assemblies Used In Air Lines Group Allow Greater Movement{1058}
1993/08/02
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3412 :

LINES GP-TURBOCHARGER OIL
6N-7734 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
6N-7720 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1N-3727 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1N-3727 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-2934 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-2934 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-2934 LINES GP-TURBOCHARGER OIL
LINES GP-DRAIN
5N-7378 LINES GP-DRAIN
LINES GP-TURBOCHARGER OIL
6N-7970 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-6248 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
8N-8377 LINES GP-TURBOCHARGER OIL
OIL PUMP GROUP
6N-4578 OIL PUMP GROUP
PUMP GP-ENGINE OIL
4N-8734 PUMP GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
PUMP GP-ENGINE OIL
1W-0729 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
1W-0729 PUMP GP-ENGINE OIL

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.