AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3P4042 GAUGE GROUP--Part 2 of 2 Serial No. 77V10200 to 77V14887 inclusive D8K TRACK-TYPE TRACTOR


OPERATOR STATION
PANEL GP
KIT-FUSE HOLDER

TRACK-TYPE TRACTOR D8K TRACK-TYPE TRACTOR 77V
 D8K TRACTOR / POWERSHIFT / 77V05006-UP (MACHINE) POWERED BY D342 ENGINE SEBP1111 D8K 77V   (1974)

OPERATOR STATION

PANEL GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
 

#SEBP11110700
 

3P-4042: GAUGE GP

3P4042 GAUGE GROUP--Part 2 of 2
Serial No. 77V10200 to 77V14887 inclusive
c169966 SEBP1111
3P4042 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3422 C [1] TEE  
2. 5P-1198 H TUBE 98 cm (38.58 in.)  
3. 5P-1198 H TUBE 93 cm (36.61 in.)  
4. 3P-5334 [2] GROMMET  
5. 5P-5630 J TUBE 1.651 m (65 in.)  
6. 4B-8756 [4] NUT  
7. 4B-0418 [1] CLIP  
  4B-6029 [1] GROMMET  
8. 7S-0687 [1] INDICATOR (air filter)  
9. 1P-6886 [1] ADAPTER  
10. 0S-1614 [2] BOLT  
  3K-6116 [2] WASHER  
11. 8F-0390 C [1] ADAPTER  
12. 5P-2948 [2] FITTING  
13. 6N-5906 C [1] SERVICE METER  
    (Includes)
  4S-1988 [1] TERMINAL (male)  
  5P-4571 [1] TERMINAL (female)  
14. 5S-8576 [1] PANEL  
15. 5M-1065 [1] GAUGE (oil pressure)  
16. 5K-9979 [2] CONNECTOR  
17. 4B-4158 [10] SCREW  
18. 1P-5486 [1] INDICATOR (conv. temp.)  
19. 5S-9068 [1] GAUGE (fuel pressure)  
20. 7N-7085 C [1] INDICATOR (water temp.)  
21. 6P-5759 C [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .15 m (6 in.)  
  2L-8076 [1] TERMINAL  
22. 2S-5012 [1] CAP  
  2S-5014 [1] CONTACT  
23. 8P-9363 C [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .15 m (6 in.)  
  2L-8075 [1] TERMINAL  
24. 5P-4571 [1] TERMINAL  
  C   INDICATES CHANGE
  J   ORDER BY THE METRE
  H   ORDER BY THE CENTIMETRE
 

#SEBP11110701
 

3P-4042: GAUGE GP

3P4042 GAUGE GROUP--Part 1 of 2
Serial No. 77V14888 to 77V17928 inclusive
c229333 SEBP1111
3P4042 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] TIE  
2. 5B-1959 [2] ADAPTER  
  2B-5721 [2] GASKET  
3. 2B-2404 [1] CLIP  
4. 8F-0244 [2] GROMMET  
5. 8P-9364 [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .15 m (6 in.)  
  5P-5694 [1] CONNECTOR  
6. 2L-8079 [1] TERMINAL  
7. 2N-7744 [1] SWITCH (pressure)  
8. 4B-8756 [2] NUT  
9. 2S-6024 [1] FUSE (5 amp)  
10. 5P-1198 H TUBE 141 cm (59.45 in.)  
11. 5K-9242 C [1] UNION  
12. 5P-1198 H TUBE 39 cm(15.35 in.)  
13. 5K-9243 [1] ELBOW  
14. 6H-3068 [1] CLIP  
15. 0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
16. 4M-5317 C [1] BUSHING  
17. 8B-1261 [1] TEE  
18. 5M-6213 [1] PLUG  
19. 3B-7738 [1] NIPPLE  
20. 8P-9365 [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .15 m (6 in.)  
  2L-8076 [1] TERMINAL  
21. 2S-5011 [1] BODY  
  2S-5013 [1] SPRING  
  2S-5014 [1] CONTACT  
22. 4S-6574 C [1] GAUGE (fuel pressure)  
  C   INDICATES CHANGE
  J   ORDER BY THE METER
  H   ORDER BY THE CENTIMETER
 

#SEBP11110702
 

3P-4042: GAUGE GP

3P4042 GAUGE GROUP--Part 2 of 2
Serial No. 77V14888 to 77V17928 inclusive
c229334 SEBP1111
3P4042 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3422 [1] TEE  
2. 5P-1198 H TUBE 98 cm(38.58 in.)  
3. 5P-1198 H TUBE 93 cm(36.61 in.)  
4. 3P-5334 [2] GROMMET  
5. 5P-5630 J TUBE 1.346 m(53 in.)  
6. 4B-8756 [4] NUT  
7. 4B-0418 [1] CLIP  
  4B-6029 [1] GROMMET  
8. 7S-0687 [1] INDICATOR (air filter)  
9. 1P-6886 [1] ADAPTER  
10. 0S-1615 C [2] BOLT  
  3B-4504 C [2] LOCKWASHER  
11. 8F-0390 [1] ADAPTER  
12. 5P-2948 [2] FITTING  
13. 6N-5906 [1] SERVICE METER  
    (Includes)
  4S-1988 [1] TERMINAL (male)  
  5P-4571 [1] TERMINAL (female)  
14. 9G-9166 C [1] PANEL  
15. 5M-1065 [1] GAUGE (oil pressure)  
16. 5K-9979 C [1] CONNECTOR  
17. 4B-4158 [10] SCREW  
18. 1P-5486 [1] INDICATOR (conv. temp.)  
19. 6P-7056 C [1] BRACKET  
20. 7N-7085 [1] INDICATOR (water temp)  
21. 6P-5759 [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .15 m(6 in.)  
  2L-8076 [1] TERMINAL  
22. 2S-5012 [1] CAP  
  2S-5014 [1] CONTACT  
23. 8P-9363 [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .15 m(6 in.)  
  2L-8075 [1] TERMINAL  
24. 5P-4571 [1] TERMINAL  
25. 1B-4330 C [1] NUT  
26. 9G-0993 C [1] COVER  
27. 9G-0994 C [1] TRAY  
  C   INDICATES CHANGE
  J   ORDER BY THE METER
  H   ORDER BY THE CENTIMETER
 

#SEBP11110703
 

3P-4042: GAUGE GP

3P4042 GAUGE GROUP--Part 1 of 2
Serial No. 77V17929-Up
c307385 SEBP1111
3P4042 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 5B-1959 [2] ADAPTER  
  2B-5721 [2] GASKET  
3. 2B-2404 [1] CLIP  
4. 8F-0244 [2] GROMMET  
5. 8P-9364 [1] WIRE AS  
  5P-5624 D WIRE (6IN.)  
  5P-5694 [1] CONNECTOR-BLADE  
6. 2L-8079 [1] TERMINAL  
7. 9G-8010 C [1] SWITCH AS (PRESSURE)  
  6V-8376 C [2] SCREW-MACHINE  
  9B-7233 C [2] LOCKWASHER  
8. 4B-8756 [2] NUT-FLARED  
9. 2S-6024 [1] FUSE (5 AMP)  
10. 5P-1198 E TUBE (59.45IN.)  
11. 5K-9242 [1] UNION-FLARED  
12. 5P-1198 E TUBE (15.35IN.)  
13. 5K-9243 [1] ELBOW-FLARED  
14. 6H-3068 [1] CLIP  
15. 0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
16. 4M-5317 [1] BUSHING  
17. 8B-1261 [1] TEE-PIPE  
18. 5M-6213 [1] PLUG  
19. 3B-7738 [1] NIPPLE  
20. 8P-9365 [1] WIRE AS  
  5P-5624 D WIRE (6IN.)  
  2L-8076 [1] TERMINAL  
21. 2S-5011 [1] BODY-FUSE HOLDER  
  2S-5013 [1] SPRING-HOLDER  
  2S-5014 [1] CONTACT-HOLDER  
22. 1W-5168 C [1] INDICATOR-PRESSURE (FUEL PRESSURE)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP11110704
 

3P-4042: GAUGE GP

3P4042 GAUGE GROUP--Part 2 of 2
Serial No. 77V17929-Up
c307386 SEBP1111
3P4042 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3422 [1] TEE  
2. 5P-1198 E TUBE 98CM(38.58IN.)  
3. 5P-1198 E TUBE 93CM(36.61IN.)  
4. 3P-5334 [2] GROMMET  
5. 5P-5630 D TUBE 1.346M(53IN.)  
6. 4B-8756 [4] NUT  
7. 4B-0418 [1] CLIP  
  4B-6029 [1] GROMMET  
8. 1W-0613 C [1] INDICATOR(AIR FILTER)  
9. 1P-6886 [1] ADAPTER  
10. 0S-1615 [2] BOLT  
  3B-4504 [2] LOCKWASHER  
11. 8F-0390 [1] ADAPTER  
12. 5P-2948 [2] FITTING  
13. 6N-5906 [1] SERVICE METER  
  4S-1988 [1] TERMINAL(MALE)  
  5P-4571 [1] TERMINAL(FEMALE)  
14. 9G-9166 [1] PANEL  
15. 1W-0705 C [1] GAUGE(OIL PRESSURE)  
16. 5K-9979 [1] CONNECTOR  
17. 4B-4158 [10] SCREW  
18. 1W-0701 C [1] INDICATOR(CONV. TEMP.)  
19. 6P-7056 [1] BRACKET  
20. 1W-5170 C [1] INDICATOR (WATER TEMP.)  
21. 6P-5759 [1] WIRE ASSEM.  
  5P-5624 D WIRE .15M (6IN.)  
  2L-8076 [1] TERMINAL  
22. 2S-5012 [1] CAP  
  2S-5014 [1] CONTACT  
23. 8P-9363 [1] WIRE ASSEM.  
  5P-5624 D WIRE .15M (6IN.)  
  2L-8075 [1] TERMINAL  
24. 5P-4571 [1] TERMINAL  
25. 1B-4330 [1] NUT  
26. 9G-0993 [1] COVER  
27. 9G-0994 [1] TRAY  
28. 6V-3507 [3] SEAL  
  C   INDICATES CHANGE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP11110705
 

6P-5411: GAUGE GP

6P5411 GAUGE GROUP--Type 1
Part of 8P5521 Roll-Over Protective System listed on Page 200
AN ATTACHMENT
c228485 SEBP1111
6P5411 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-6590 [3] GROMMET 4.83 mm(19 in.) long  
  6P-6591 [2] GROMMET 6.35 mm(.25 in.) long  
2. 5P-1198 H TUBE 12.4 cm(4.9 in.)  
3. 4B-8756 C [6] NUT  
4. 5L-1409 C [2] HOSE ASSEM. 30.50 cm(12 in.)  
5. 3B-1915 C [1] BOLT  
6. 5K-9979 C [4] CONNECTOR  
7. 6P-6598 [1] BRACKET ASSEM.  
    (Includes)
8. 6P-6595 [1] GASKET  
9. 9S-7742 C [1] TEE  
10. 2S-2535 [1] INDICATOR (converter temp.)  
11. 6P-6592 [1] GASKET  
12. 1P-5121 [10] SCREW  
13. 1L-6377 C [1] BUTTON  
14. 5P-1005 C [1] PLUG  
15. 2A-0762 C [1] BOLT  
16. 2N-7744 [1] SWITCH (pressure)  
17. 5D-0123 C [1] WIRE ASSEM.  
    (Includes)
  5P-5629 CJ WIRE 1.02 m(40.15 in.)  
18. 2L-8076 [1] TERMINAL  
19. 8M-0537 C [1] TERMINAL (ground)  
20. 5P-1198 CH TUBE 114.4 cm(44.44 in.)  
21. 6P-7056 [1] BRACKET  
22. 6P-7054 [1] BRACKET ASSEM.  
23. 0S-1615 [3] BOLT  
24. 1B-4330 [3] NUT  
25. 3B-4504 C [4] LOCKWASHER  
26. 5P-1198 CH TUBE 110 cm(42.85 in.)  
27. 6P-7117 [1] CLIP  
28. 4B-6029 [6] GROMMET  
29. 9P-9641 C [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE 1.02 m(40.15 in.)  
30. 5P-5995 J TUBE .310 m(12.20 in.)  
31. 5P-5694 [1] CONNECTOR  
32. 5P-4571 [1] TERMINAL  
33. 1S-9593 [2] STRAP  
34. 2S-5014 [1] CONTACT  
  2S-5012 [1] CAP  
35. 2L-8079 [1] TERMINAL  
36. 6P-7442 C [1] WIRE ASSEM.  
    (Includes)
  5P-5629 J WIRE .146 m(5.75 in.)  
37. 2L-8078 [1] TERMINAL  
38. 2S-5011 [1] BODY  
  2S-5013 [1] SPRING  
  2S-5014 [1] CONTACT  
39. 6P-7053 [3] CLAMP  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
  J   ORDER BY THE METER
 

#SEBP11110706
 

6P-5411: GAUGE GP

6P5411 GAUGE GROUP--Type 2
Part of 8P5521 Roll-Over Protective System listed on Page 200
AN ATTACHMENT
c176758 SEBP1111
6P5411 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-6590 [3] GROMMET 4.83 mm(19 in.) long  
  6P-6591 [2] GROMMET 6.35 mm(.25 in.) long  
2. 5P-1198 H TUBE 12.4 cm(4.9 in.)  
3. 4B-8756 [6] NUT  
4. 5L-1409 [2] HOSE ASSEM. 30.50 cm(12 in.)  
5. 3B-1915 [1] BOLT  
6. 5K-9979 [4] CONNECTOR  
7. 6P-6598 [1] BRACKET ASSEM.  
8. 6P-6595 C [1] GASKET  
9. 9S-7742 [1] TEE  
10. 2S-2535 [1] INDICATOR (converter temp.)  
11. 6P-6592 [1] GASKET  
12. 1P-5121 [10] SCREW  
13. 1L-6377 [1] BUTTON  
14. 5P-1005 [1] PLUG  
15. 2A-0762 [1] BOLT  
16. 2N-7744 [1] SWITCH (pressure)  
17. 5D-0123 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 J WIRE 1.02 m (40.15 in.)  
18. 2L-8076 [1] TERMINAL  
19. 8M-0537 [1] TERMINAL (ground)  
20. 5P-1198 H TUBE 114.4 cm (44.44 in.)  
21. 6P-7056 [1] BRACKET  
22. 6P-7054 [1] BRACKET ASSEM.  
23. 0S-1615 [3] BOLT  
24. 1B-4330 [3] NUT  
25. 3B-4504 [4] LOCKWASHER  
26. 5P-1198 H TUBE 110 cm (42.85 in.)  
27. 6P-7117 [1] CLIP  
28. 4B-6029 [6] GROMMET  
29. 6P-7053 [3] CLAMP  
30. 9G-2797 C [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .46 m (18.10 in.)  
31. 5P-4571 [1] TERMINAL  
32. 2S-5014 [1] CONTACT  
  2S-5012 [1] CAP  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
  J   ORDER BY THE METER
 

#SEBP11110707
 

6P-5411: GAUGE GP

6P5411 GAUGE GROUP--Type 3
Part of 8P5521 Roll-Over Protective System listed on Page 200
AN ATTACHMENT
c229332 SEBP1111
6P5411 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-6590 C [2] GROMMET 4.76mm(.118 in.) I.D.  
  6P-6591 C [1] GROMMET 6.35mm(.25 in.) I.D.  
2. 6P-5402 H TUBE 14.37 cm (5.66 in.)  
3. 4B-8756 C [4] NUT  
4. 4B-0418 C [1] CLIP  
5. 3B-1915 [1] BOLT  
6. 5K-9979 C [2] CONNECTOR  
7. 6P-6598 [1] BRACKET ASSEM.  
8. 6P-6595 [1] GASKET  
9. 9S-7742 [1] TEE  
10. 2S-2535 [1] INDICATOR (converter temp.)  
11. 6P-6592 [1] GASKET  
12. 1P-5121 [10] SCREW  
13. 1L-6377 C [2] BUTTON  
14. 5P-1005 C [2] PLUG  
15. 4B-6029 C [2] GROMMET  
16. 2N-7744 [1] SWITCH (pressure)  
17. 5D-0123 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 J WIRE 1.02 m (40.15 in.)  
18. 2L-8076 [1] TERMINAL  
19. 8M-0537 [1] TERMINAL (ground)  
20. 5P-1198 CH TUBE 109.5 cm (43.11 in.)  
21. 6P-7055 [1] BRACKET  
22. 0S-0509 C [1] BOLT  
  1D-4717 C [1] NUT  
  5M-2894 C [1] WASHER  
23. 5D-7596 C [1] CLIP  
24. 9G-2797 [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .46 m (18.10 in.)  
25. 5P-4571 [1] TERMINAL  
26. 2S-5014 [1] CONTACT  
  2S-5012 [1] CAP  
27. 5L-1409 C [1] HOSE ASSEM. 30.5 cm (12 in.)  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
  J   ORDER BY THE METER
 

#SEBP11110708
 

6P-5411: GAUGE GP

6P5411 GAUGE GROUP--Type 4
Part of 8P5521 Roll-Over Protective System listed on Page 200
AN ATTACHMENT
c302553 SEBP1111
6P5411 GAUGE GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-6590 [2] GROMMET 4.76mm(.118 in.) I.D.  
  6P-6591 [1] GROMMET 6.35mm(.25 in.) I.D.  
2. 6P-5402 H TUBE 14.37 cm (5.66 in.)  
3. 4B-8756 [4] NUT  
4. 4B-0418 [1] CLIP  
5. 3B-1915 [1] BOLT  
6. 5K-9979 [2] CONNECTOR  
7. 6P-6598 [1] BRACKET ASSEM.  
8. 6P-6595 [1] GASKET  
9. 9S-7742 [1] TEE  
10. 1W-3293 C [1] INDICATOR (converter temp.)  
11. 6P-6592 [1] GASKET  
12. 1P-5121 [10] SCREW  
13. 1L-6377 [2] BUTTON  
14. 5P-1005 [2] PLUG  
15. 4B-6029 [2] GROMMET  
16. 9G-8010 C [1] SWITCH ASSEM. (pressure)  
17. 5D-0123 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 J WIRE 1.02 m (40.15 in.)  
18. 2L-8076 [1] TERMINAL  
19. 8M-0537 [1] TERMINAL (ground)  
20. 5P-1198 H TUBE 109.5 cm (43.11 in.)  
21. 6P-7055 [1] BRACKET  
22. 0S-0509 [1] BOLT  
  1D-4717 H [1] NUT  
  5M-2894 [1] WASHER  
23. 5D-7596 [1] CLIP  
24. 9G-2797 [1] WIRE ASSEM.  
    (Includes)
  5P-5624 J WIRE .46 m (18.10 in.)  
25. 5P-4571 [1] TERMINAL  
26. 2S-5014 [1] CONTACT  
  2S-5012 [1] CAP  
27. 3T-1756 C [1] HOSE ASSEM. 30.5 cm (12 in.)  
28. 6V-3507 C [1] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
  J   ORDER BY THE METER
 

#SEBP11110709
 

7N-8292: KIT-FUSE HOLDER

7N8292 FUSE HOLDER, FUSE AND WIRE KIT--Field Installation
Provides protective from overload failure of 6N5906 Hour Meter without sealed vent
holes. Those Hour Meters with vent holes have a white dash mark under two
central figures
c174551 SEBP1111
7N8292 KIT-FUSE HOLDER Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-1988 [1] TERMINAL  
2. 5P-5624 D WIRE .08M(3.15IN)  
3. 2S-5013 [1] SPRING-HOLDER  
4. 2S-6024 [1] FUSE (5 AMP)  
  2S-8708 [2] CONTACT-HOLDER  
5. 5P-5624 D WIRE .06M(2.36IN)  
6. 5P-4571 [1] TERMINAL  
  D   ORDER BY THE METER
 

Information:

Service Magazine
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog D8K :

GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
METER GP-HOUR
6P-6456 METER GP-HOUR
METER GP-HOUR
3P-4615 METER GP-HOUR
HORN GP-ELECTRIC
8P-1271 HORN GP-ELECTRIC
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
3P-4042 GAUGE GP
GAUGE GP
6P-5411 GAUGE GP
GAUGE GP
6P-5411 GAUGE GP
GAUGE GP
6P-5411 GAUGE GP
GAUGE GP
6P-5411 GAUGE GP

Truck sale:

Caterpillar D8K, Construction
38,925 
Caterpillar D8K, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D8K 1981
$29,877 USD 
CATERPILLAR D8K 1981
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR D8K 1977
 
CATERPILLAR D8K 1977
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR D8K 1979
 
CATERPILLAR D8K 1979
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR D8K 1980
 
CATERPILLAR D8K 1980
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.