AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N4308 CYLINDER BLOCK ASSEMBLY Engine Serial No. 17S20234-Up. Part Of 7N9615 Cylinder Block Group Shown On Page 7E.02. For Field Installation Order 8N4312 Cylinder Block Assembly Shown On Page 7G D8K


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

TRACK-TYPE TRACTOR D8K TRACK-TYPE TRACTOR 76V
 D8K TRACTOR / DIRECT DRIVE / 76V00505-UP (MACHINE) POWERED BY 342 ENGINE SEBP1112 D8K 76V   (1976)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AS
8N-4312 CYLINDER BLOCK AS
CYLINDER BLOCK GP
5N-8214 CYLINDER BLOCK GP
CYLINDER BLOCK AS
8N-4308 CYLINDER BLOCK AS
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
 

#SEBP11120020
 

8N-4308: CYLINDER BLOCK AS

8N4308 CYLINDER BLOCK ASSEMBLY
Engine Serial No. 17S20234-Up. Part Of 7N9615 Cylinder Block Group
Shown On Page 7E.02. For Field Installation Order 8N4312 Cylinder
Block Assembly Shown On Page 7G
c182810 SEBP1112
8N4308 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-5360 [1] COVER  
2. 6L-5503 [2] GASKET  
3. 3J-5390 [1] PLUG  
4. 0S-1594 [32] BOLT  
5. 6N-0084 [1] COVER  
6. 1P-0667 [14] STUD  
  1A-5666 [14] NUT  
  4M-6953 [14] WASHER  
7. 2H-8829 [1] PLUG  
  4F-9325 [1] GASKET  
8. 5B-5812 [1] DOWEL  
9. 4S-6836 [1] CAP  
10. 4S-6835 [6] CAP  
11. 8N-5676 [6] LINER  
  8N-4638 [6] BAND  
12. 6L-7812 [18] SEAL  
  H [6] INSERT (liner seat)  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  7N-3802 [1] KIT (cylinder block hardware)  
  H   NOT PART 8N4308 GROUP-NOT SHOW
 

#SEBP11120021
 

4N-5236: CRANKSHAFT GP

4N5236 CRANKSHAFT GROUP
Engine Serial No. 17S5088 to 17S8393 inclusive
c203268 SEBP1112
4N5236 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [12] BOLT  
  7H-3070 [6] LOCK  
2. 1S-8607 [1] BAFFLE  
  5H-2669 [1] GASKET  
3. 7S-0662 [1] SEAL  
4. 4S-7793 [1] THROWER  
5. 6N-2823 R [1] CRANKSHAFT ASSEM.  
    (Includes)
6. 4S-7863 [1] GEAR (40 teeth)  
7. 0S-1604 [8] BOLT  
  4S-7864 [4] LOCK  
8. 4S-6582 [1] BEARING  
9. 4S-6581 [6] BEARING  
10. 2S-1509 [1] SEAL  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP11120022
 

4N-5236: CRANKSHAFT GP

4N5236 CRANKSHAFT GROUP
Engine Serial No. 17S8394-Up
c212649 SEBP1112
4N5236 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [12] BOLT  
  7H-3070 [6] LOCK  
2. 1S-8607 [1] BAFFLE  
  5H-2669 [1] GASKET  
3. 7S-0662 [1] SEAL  
4. 4S-7793 [1] THROWER  
5. 6N-2823 R [1] CRANKSHAFT ASSEM.  
    (Includes)
6. 4S-7863 [1] GEAR (40 teeth)  
7. 0S-1604 [8] BOLT  
8. 4S-6582 [1] BEARING  
9. 4S-6581 [6] BEARING  
10. 9N-2539 C [1] SEAL  
11. 9J-0110 C [1] SLEEVE  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP11120023
 

7N-0142: CRANKSHAFT SEAL GROUP

7N142 CRANKSHAFT SEAL GROUP--Front
Engine Serial No. 17S5088 to 17S8393 inclusive. Provides Field Replacement for
2S1509 Seal shown on Page 8
SEBP11120023 SEBP1112
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9J-0110 [1] SLEEVE  
  9N-2539 [1] SEAL  
 

#SEBP11120024
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP11120024 SEBP1112
None CRANKSHAFT BEARING REPLACEMENTS Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP11120025
 

4H-9649: CAMSHAFT GP

4H9649 CAMSHAFT GROUP
c128744 SEBP1112
4H9649 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-7384 [1] GEAR (80 TEETH)  
  0S-1599 [12] BOLT  
  1B-4205 [12] NUT  
  4S-7870 [1] CAMSHAFT ASSEM.  
  1B-8714 [1] KEY  
  6F-7172 [1] DOWEL  
  2M-4091 [1] GEAR (62 TEETH)  
    (PARTS OF 4S7870 CAMSHAFT ASSEM.)
  4H-9648 [1] LOCK  
 

#SEBP11120026
 

4N-6816: CONNECTING ROD AND PISTON GROUP

4N6816 CONNECTING ROD AND PISTON GROUP--6 Required
Engine Serial No. 17S5088 to 17S6087 inclusive
c156590 SEBP1112
4N6816 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-9183 [1] BEARING  
    (PART OF ROD ASSEM.4S6867)
  4S-6834 [1] BEARING  
    (STANDARD)
  4S-9276 H [1] BEARING  
    (.025" UNDERSIZE)
  4S-9277 H [1] BEARING  
    (.050" UNDERSIZE)
  6N-5025 C [1] RING (TOP)  
  6N-5026 [1] RING (INTERMEDIATE)  
  3H-0881 [1] RING (BOTTOM OIL)  
    (PARTS OF PISTON GROUP 4N6815)
  4N-6815 [1] PISTON GROUP  
  7M-4926 [2] RETAINER  
  3H-6767 [1] PIN  
  4S-6867 R [1] ROD ASSEM.  
  9S-8493 [2] BOLT  
  9S-8494 [2] NUT  
    (PARTS OF ROD ASSEM 4S6867)
  6N-5536 PISTON RING GROUP  
    (CONSISTS OF COMPLETE SET OF RINGS FOR ONE PISTON)
  H   NOT PART OF 4N6816 PISTON GROU
  R   REMFG PART MAY BE AVAILABLE
  C   INDICATES CHANGE
 

#SEBP11120027
 

7N-1368: PISTON & ROD GP

7N1368 CONNECTING ROD AND PISTON GROUP--6 Required
Engine Serial No. 17S6088-Up
c162268 SEBP1112
7N1368 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-9183 [1] BEARING  
    (PART OF ROD ASSEM. 4S6867)
  4S-6834 [1] BEARING  
    (STANDARD)
  4S-9276 H [1] BEARING  
    (.025" UNDERSIZE)
  4S-9277 H [1] BEARING  
    (.050" UNDERSIZE)
  6N-5025 [1] RING (TOP)  
  6N-5026 [1] RING (INTERMEDIATE)  
  3H-0881 [1] RING (BOTTOM OIL)  
    (Parts of Piston Group 7N1367)
  7N-1367 [1] PISTON GROUP  
  7M-4926 [2] RETAINER  
  3H-6767 [1] PIN  
  4S-6867 R [1] ROD ASSEM.  
  9S-8493 [2] BOLT  
  9S-8494 [2] NUT  
    (PARTS OF ROD ASSEM 4S6867)
  6N-5536 PISTON RING GROUP  
    (Consists of Complete Set of Rings for one Piston)
  H   NOT PART OF 7N1368 PISTON GROU
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP11120028
 

8N-6004: CYL HEAD A

8N6004 CYLINDER HEAD SERVICE GROUP--Field Installation
Engine Serial No. 17S5088 to 17S8313 inclusive
c226230 SEBP1112
8N6004 CYL HEAD A Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [16] PLUG  
2. 7N-2051 [6] GUIDE  
3. 5H-7071 [12] DIRECTORS  
4. 8M-9810 [3] INSERT (exhaust)  
    (STANDARD)
  4S-8896 H [3] INSERT  
    0.13 mm(.005 in.) oversize
  4S-8897 H [3] INSERT  
    0.26 mm(.010 in.) oversize
5. 9M-8745 [3] INSERT (intake)  
    (STANDARD)
  4S-8912 H [3] INSERT  
    0.13 mm(.005 in.) oversize
  4S-8913 H [3] INSERT  
    0.26 mm(.010 in.) oversize
  H   NOT PART OF 8N6004 CYLINDER HE
 

#SEBP11120029
 

4N-9894: CYLINDER HEAD GROUP

4N9894 CYLINDER HEAD GROUP
Engine Serial No. 17S5088 to 17S8313 inclusive
7N6358 Service Group is replaced by 8N6004 shown on Page 10A
c216525 SEBP1112
4N9894 CYLINDER HEAD GROUP Parts scheme
  For full view, you need register

Parts for your D8K TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-6358 C [2] CYLINDER HEAD SERVICE GROUP  
    (Each Includes)
2. 3B-0623 [16] PLUG  
3. 7N-2051 C [6] GUIDE  
4. 5H-7071 [12] DIRECTOR  
5. 9M-8745 [3] INSERT (intake)  
    (Standard)
  4S-8912 LH [3] INSERT .127 mm(.005 in.)  
  4S-8913 LH [3] INSERT .254mm(.01 in.)  
  8M-9810 [3] INSERT (exhaust)  
  4S-8896 LH [3] INSERT .127 mm(.005 in.)  
  4S-8897 LH [3] INSERT .254 mm(.01 in.)  
6. 3N-1414 [12] SPACER  
7. 4S-7468 [12] ROTATOR  
8. 9M-5350 [12] SPRING (outer)  
9. 6B-8505 [12] SLEEVE  
10. 3B-1143 [36] LOCK  
11. 3B-1142 [12] RETAINER  
12. 9M-5349 [12] SPRING (inner)  
13. 6B-6683 [26] NUT  
  9H-1024 [26] WASHER  
14. 2P-0484 [3] CHAMBER ASSEM.  
15. 6L-7816 [3] SEAL  
16. 1A-5666 [16] NUT  
  9H-1031 [16] WASHER  
17. 9H-1288 [6] STUD  
18. 7B-7770 [2] COVER  
  6H-2007 [2] GASKET  
19. 0L-1351 [4] BOLT  
  5M-2894 [4] WASHER  
20. 6L-7813 [24] SEAL  
21. 6B-6224 [24] FERRULE  
22. 1P-6442 [6] GASKET 3.54 mm(.139 in.)  
  1P-6441 [6] GASKET 3.94 mm(.155 in.)  
  5H-2579 [6] GASKET 3.15 mm(.124 in.)  
23. 8H-1993 [6] VALVE (intake)  
24. 8H-1994 [6] VALVE (exhaust)  
25. 1S-4390 [2] GASKET  
26. 6N-7502 C [2] GASKET  
27. 7B-2420 [2] FERRULE  
  6L-7814 [2] SEAL  
28. 9H-1022 [3] STUD  
29. 9H-1020 [6] STUD  
30. 2B-7557 [3] CORK  
  H   NOT PART OF 7N6358 GROUP
  L   OVERSIZE
  C   INDICATES CHANGE
 

Information:

Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Caterpillar Parts SIS Catalog D8K :

CYLINDER BLOCK GP
5N-8214 CYLINDER BLOCK GP
CYLINDER BLOCK AS
8N-4312 CYLINDER BLOCK AS
CYLINDER BLOCK ASSEMBLY
7N-3035 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK GP
7N-9615 CYLINDER BLOCK GP
CYLINDER BLOCK GP
5N-8212 CYLINDER BLOCK GP
CYLINDER BLOCK GROUP
7N-3333 CYLINDER BLOCK GROUP
CYLINDER BLOCK GROUP
7N-3333 CYLINDER BLOCK GROUP
CYLINDER BLOCK GROUP
7N-3333 CYLINDER BLOCK GROUP
CRANKSHAFT GP
4N-5236 CRANKSHAFT GP
CRANKSHAFT GP
4N-5236 CRANKSHAFT GP
7N-0142 CRANKSHAFT SEAL GROUP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CAMSHAFT GP
4H-9649 CAMSHAFT GP
CONNECTING ROD AND PISTON GROUP
4N-6816 CONNECTING ROD AND PISTON GROUP
PISTON & ROD GP
7N-1368 PISTON & ROD GP
CYL HEAD A
8N-6004 CYL HEAD A

Truck sale:

Caterpillar D8K, Construction
38,925 
Caterpillar D8K, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D8K 1981
$29,877 USD 
CATERPILLAR D8K 1981
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR D8K 1977
 
CATERPILLAR D8K 1977
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR D8K 1979
 
CATERPILLAR D8K 1979
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR D8K 1980
 
CATERPILLAR D8K 1980
- TRACK TYPE TRACTORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.