AVSPARE.COM
parts catalog

4N7693 CRANKSHAFT ASSEMBLY--Field Installation D7G TRACK-TYPE TRACTOR




BASIC ENGINE

CRANKSHAFT GP
 

#SEBP11160020
 

4N-7693: CRANKSHAFT AS

4N7693 CRANKSHAFT ASSEMBLY--Field Installation
c202604 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3858 [1] SLEEVE  
2. 9F-2247 [6] PLUG  
3. 5H-2671 [1] KEY  
4. 4M-9933 [1] GEAR (40 teeth)  
5. 2P-3859 [1] SLEEVE  
 

#SEBP11160021
 

6N-8079: CRANKSHAFT GP

6N8079 CRANKSHAFT GROUP
Engine Serial No. 3N79763 to 3N99999 inclusive & 62Z1-Up
4N7697 Assembly is replaced by 4N7693 shown on Page 9
c230668 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9342 [2] PLATE  
2. 4N-7697 C [1] CRANKSHAFT ASSEM.  
    (Includes)
3. 9F-2247 [6] PLUG  
4. 8N-8224 C [7] BEARING  
  C   INDICATES CHANGE
 

#SEBP11160022
 

CRANKSHAFT SERVICE THRUST PLATE

CRANKSHAFT SERVICE THRUST PLATE--Field Installation
Provides a Thrust Plate to be used in the event a "Wide" Thrust Journal Crankshaft
is installed in a Spacer Plate Cylinder Block
SEBP11160022 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7N-9343 [1] THRUST PLATE  
 

#SEBP11160023
 

2P-6226: SEAL GP-CRANKSHAFT

2P6226 CRANKSHAFT SEAL GROUP
c210718 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-8853 C [1] SEAL-LIP TYPE  
2. 2P-3858 [1] SLEEVE-WEAR  
3. 2P-3859 [1] SLEEVE-WEAR  
4. 5S-6296 [1] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11160024
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP11160024 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP11160025
 

2P-6272: PISTON & ROD GP

2P6272 CONNECTING ROD AND PISTON GROUP--6 Required
Engine Serial No. 3N38169 to 3N76794 and 3N78127 to 3N89894 inclusive
c222694 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 C [1] PIN-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 5S-2793 [1] ROD AS  
  8N-0703 C [1] BEARING  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
5. 7M-7821 [1] BEARING-CONNECTING ROD  
  2S-0502 [1] BEARING-.254MM US (.010IN)  
  2S-0503 [1] BEARING-.508MM US (.020IN)  
  7M-7826 [1] BEARING-.762MM US (.030IN)  
6. 4N-9258 C [1] PISTON GP  
7. 9S-7788 [1] RING-PISTON OIL  
8. 5S-6750 [1] RING-INTERMEDIATE  
9. 9S-3029 [1] RING-PISTON TOP  
  9S-3068 C [1] RING GP  
    (CONSISTS OF COMPLETE
    SET OF RINGS FOR
    ONE PISTON)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11160026
 

2P-6202: CAMSHAFT GP-SINGLE

2P6202 CAMSHAFT GROUP
c226144 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3981 C [1] CAMSHAFT  
2. 7S-2204 [1] WASHER-THRUST  
3. 8S-1491 [1] LOCK  
4. 0S-0509 [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11160027
 

8N-5007: CONNECTING ROD AND PISTON GROUP

8N5007 CONNECTING ROD AND PISTON GROUP--6 Required
Engine Serial No. 3N76795 to 3N78126 inclusive
c223271 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 [1] PIN  
2. 1S-9543 [2] RETAINER  
3. 6N-8069 [1] ROD ASSEM.  
  8N-0703 [1] BEARING  
4. 1P-9956 [2] BOLT  
  5S-6348 [2] NUT  
5. 4N-6258 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 4N-9258 [1] PISTON GROUP  
7. 9S-7788 [1] RING (Oil)  
8. 5S-6750 [1] RING (intermediate)  
9. 9S-3029 [1] RING (top)  
  9S-3068 [1] RING GROUP  
    (Consists of Complete Set of Rings For One Piston)
 

#SEBP11160028
 

2P-6272: PISTON & ROD GP

2P6272 CONNECTING ROD AND PISTON GROUP--6 Required
Engine Serial No. 3N89895 to 3N99999 inclusive & 62Z1-Up
c314546 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 [1] PIN-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 8N-1721 CR [1] ROD AS-CONNECTING  
  8N-1849 C [1] BEARING-CONNECTING ROD  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 C [2] NUT-SPECIAL  
5. 4W-5739 C [1] BEARING-CONNECTING ROD (STANDARD)  
  8N-8221 C [1] BEARING-CONNECTING ROD (.010IN)  
  8N-8222 C [1] BEARING-CONNECTING ROD (.020IN)  
  8N-8223 C [1] BEARING-CONNECTING ROD (.030IN)  
6. 9N-5251 C [1] PISTON GP  
7. 9S-7788 [1] RING-PISTON  
8. 5S-6750 [1] RING-INTERMEDIATE  
9. 9S-3029 [1] RING-PISTON TOP  
  9S-3068 [1] RING GP (CONSISTS OF COMPLETE  
    SET OF RINGS FOR ONE
    PISTON)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP11160029
 

6N-1879: CYLINDER HEAD GROUP

6N1879 CYLINDER HEAD GROUP
Engine Serial No. 3N38169 to 3N55449 inclusive
4N7446 Head parts are shown on Page 13
c205044 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-7446 Y [1] HEAD ASSEM.  
    (Separate Illustration)
2. 7S-8809 [6] VALVE (intake)  
3. 7S-6767 [6] VALVE (exhaust)  
4. 7S-7144 [12] SPRING  
5. 2A-4429 [24] LOCK  
6. 5S-5874 [12] ROTOCOIL  
7. 8S-3970 [6] CHAMBER ASSEM.  
  7S-3206 [6] SEAL  
  5M-2667 [6] GASKET .194 in. (4.9 mm) thick  
  2S-8959 [6] GASKET .223 in. (5.66 mm) thick  
  2S-8960 [6] GASKET .248 in. (6.3 mm) thick  
8. 5S-6281 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Magazine

Caterpillar Parts SIS Catalog D7G :

Truck sale:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.