AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2S7100 FINAL DRIVE GROUP--Part 1 of 2 Serial No. 92V10237-Up 9G8 Sprocket parts are shown on Page 150 D7G


POWER TRAIN
DRIVE GP-FINAL
SPROCKET GP
STEERING AND BRAKING SYSTEM
CLUTCH & BRAKE GP-STEERING

TRACK-TYPE TRACTOR D7G TRACK-TYPE TRACTOR 92V
 D7G TRACTOR / POWERSHIFT / 92V02127-11897 (MACHINE) POWERED BY 3306 ENGINE SEBP1116 D7G 92V   (1975)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
CASE GP-FINAL DRIVE
8P-1687 CASE GP-FINAL DRIVE
CASE GP-FINAL DRIVE
8P-1687 CASE GP-FINAL DRIVE
 

#SEBP11160440
 

2S-7100: FINAL DRIVE GP

2S7100 FINAL DRIVE GROUP--Part 1 of 2
Serial No. 92V10237-Up
9G8 Sprocket parts are shown on Page 150
c232237 SEBP1116
2S7100 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4206 [2] NUT  
2. 3B-4510 [2] LOCKWASHER  
3. 5S-4863 [2] HOLDER ASSEM.  
4. 9M-4007 [2] DOWEL  
5. 8M-6521 [1] DOWEL  
6. 3B-8489 [2] FITTING  
7. 2A-2814 [2] BOLT  
8. 7G-6576 [2] CAGE ASSEM.  
9. 5D-7449 [2] CUP  
10. 6P-7639 [2] GASKET  
11. 8P-1653 C [2] NUT  
12. 8S-2506 [2] LOCK  
13. 5F-1248 [2] CONE  
14. 2S-7063 [2] NUT  
15. 8P-1252 R [4] SEAL GROUP  
16. 1M-9011 [2] RING  
17. 8P-1654 C [2] GUARD  
18. 2S-7066 [2] LOCK  
19. 5M-2894 C [20] WASHER  
20. 1A-2029 C [20] BOLT  
21. 9G-0008 YC [2] SPROCKET GROUP  
    (Separate Illustration)
22. 7H-3171 [2] PLUG  
23. 3B-4508 [12] LOCKWASHER  
24. 0S-1585 [12] BOLT  
25. 5H-3262 [2] DOWEL  
26. 0L-1026 [4] PLUG  
27. 1M-5156 [2] DOWEL  
28. 2B-7557 [6] CORK  
29. 2B-2994 [6] DOWEL  
30. 3P-2872 [1] CASE (L.H.)  
  3P-2871 [1] CASE (R.H.)  
  7M-7260 LIQUID GASKET  
31. 1A-1135 [62] BOLT  
32. 4D-3704 [62] WASHER  
33. 2K-0744 [2] PLUG  
34. 1S-5347 [2] SEAL  
35. 1P-7590 [2] SUPPORT ASSEM.  
36. 2P-0895 [1] KIT (bearing service)  
    (Includes Bearing & 2P896 Sealant kit)
37. 2S-7069 [8] SHIM  
38. 2S-7596 [2] RETAINER  
39. 2S-7594 [2] LOCK  
40. 5M-5017 [2] NUT  
41. 8M-9441 [2] GASKET  
42. 2S-7064 [2] CAP  
43. 9F-2247 [2] PLUG  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP11160441
 

2S-7100: FINAL DRIVE GP

2S7100 FINAL DRIVE GROUP--Part 2 of 2
Serial No. 92V10237-Up
c232238 SEBP1116
2S7100 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-9669 [4] RACE AND ROLLER ASSEM.  
2. 9S-4829 [4] RACE  
3. 1M-8776 [4] RACE AND ROLLER ASSEM.  
4. 2P-2811 [4] RACE  
5. 2P-3424 [2] GEAR (47 teeth)  
6. 9S-6875 [2] PINION (12 teeth)  
7. 7B-3235 [16] BOLT  
8. 5M-6646 [4] LOCK 9.2 cm(3.62 in.)center to center  
9. 4S-5017 [2] CAGE  
  3F-1953 [2] DOWEL  
10. 7M-7260 LIQUID GASKET  
11. 5P-7143 [2] SEAL GROUP  
  5P-7145 [2] RING  
12. 2M-4537 [2] DOWEL  
13. 9P-0620 [2] CAGE  
14. 2M-0849 [14] WASHER  
15. 0S-1585 [14] BOLT  
16. 0S-1589 [24] BOLT  
17. 4D-3704 C [24] WASHER  
18. 2S-7527 [2] FLANGE  
19. 5M-1998 [2] DRUM  
20. 1K-6705 [2] BOLT  
21. 0T-0030 [2] NUT  
22. 5M-1993 [2] LOCK  
23. 5M-1996 [2] GASKET  
24. 2B-7906 [2] PIN  
25. 9H-5402 [2] NUT  
26. 2B-7862 [2] RING  
27. 2S-7062 [2] SHAFT  
28. 2S-6401 [2] CUP  
29. 2S-6400 [2] CONE  
30. 1B-8744 [2] KEY  
31. 6B-6682 [32] NUT  
32. 3B-1472 [16] LOCK  
33. 2S-3946 [2] GEAR (52 teeth)  
34. 6B-4598 [32] BOLT  
35. 2S-7099 R [2] HUB  
36. 5M-6647 [4] LOCK 8.56 cm(3.37 in.)center to center  
37. 2P-3426 [2] RETAINER  
38. 2P-3425 [2] PINION (12 teeth)  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP11160442
 

8P-0061: SEGMENTED SPROCKET GROUP

8P61 SEGMENTED SPROCKET GROUP
Serial No. 92V2127 to 92V4129 inclusive. Part of 2S7100 Final Drive Group shown
on Pages 144, 146 & 148. Note: 8P9455 Segment, which provides extended
bushing wear life, is available
c155389 SEBP1116
8P0061 SEGMENTED SPROCKET GROUP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3608 [20] NUT  
2. 3P-0636 [5] SEGMENT  
3. 8P-0062 [1] HUB  
4. 3S-0336 [20] BOLT  
 

#SEBP11160443
 

6P-8688: SPROCKET SEGMENT GROUP

6P8688 SPROCKET SEGMENT GROUP
FOR USE WITH SEALED NON-LUBRICATED TRACKS
AN ATTACHMENT
SEBP11160443 SEBP1116
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-0351 [10] SEGMENT  
 

#SEBP11160444
 

8P-8170: SPROCKET GP-SEGMENTED

8P8170 SEGMENTED SPROCKET GROUP
Serial No. 92V4130 to 92V10236 inclusive
Part of 2S7100 Final Drive Group shown on Page 149A
c165061 SEBP1116
8P8170 SPROCKET GP-SEGMENTED Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3608 [20] NUT  
2. 8P-8174 [5] SEGMENT  
3. 8P-0062 [1] HUB  
4. 3S-0336 [20] BOLT  
 

#SEBP11160445
 

9G-0008: SPROCKET GP

9G8 SEGMENTED SPROCKET GROUP
Serial No. 92V10237-Up. Part of 2S7100 Final Drive Group shown on Pages 149J
& 149K. Note: 8P9455 Segment which provides extended Bushing wear Life
is available
c232239 SEBP1116
9G0008 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3608 [20] NUT  
2. 8P-8174 [5] SEGMENT  
3. 9G-0007 [1] HUB  
4. 3S-0336 [20] BOLT  
 

#SEBP11160446
 

6P-5657: CONTROL GP-STEERING CLUTCH

6P5657 STEERING CLUTCH CONTROL GROUP--Type 1
Part of 6P5183 Roll-Over Protective System listed on Page 226
AN ATTACHMENT
c205365 SEBP1116
6P5657 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0102 [4] BOLT  
2. 3B-4506 [5] LOCKWASHER  
3. 1P-2878 [4] ROLLER  
4. 3P-3525 [2] BRACKET ASSEM.  
    (Each Includes)
5. 9F-2978 [2] NUT (weld)  
6. 1A-8827 [4] PIN  
7. 3B-4615 [8] COTTER PIN  
8. 3P-2695 [2] ROD  
9. 9S-1354 [2] NUT  
10. 9S-1314 [2] END  
11. 9S-1315 [2] PIN  
  3B-4617 [2] COTTER PIN  
12. 9M-5884 [2] BUMPER  
13. 3P-2399 [2] LEVER  
14. 9H-3273 [1] SPACER 1.375 in.(3.49 cm) thick  
  6P-5472 [1] SPACER .80 in.(2.06 cm) thick  
15. 0S-0509 [1] BOLT  
16. 6P-6253 [1] LOCK  
17. 6P-5475 [1] SHAFT  
18. 6D-5974 [4] BEARING  
19. 1B-0676 [4] PIN  
20. 3P-4161 [2] BOOT  
21. 5J-3658 [2] ROD  
22. 5B-9079 [2] NUT  
23. 1M-1341 [2] END  
24. 6P-5079 [1] BELLCRANK 5.28 in.(13.41 cm)thick  
  6P-5080 [1] BELLCRANK 2.38 in.(6.05 cm) thick  
25. 6K-8088 [4] BEARING  
26. 002-1634 C [8] SEAL  
  C   INDICATES CHANGE
 

#SEBP11160447
 

6P-5657: CONTROL GP-STEERING CLUTCH

6P5657 STEERING CLUTCH CONTROL GROUP--Type 2
Part of 6P5183 Roll-Over Protective System listed on Page 226
AN ATTACHMENT
c222411 SEBP1116
6P5657 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0102 [4] BOLT  
2. 3B-4506 [5] LOCKWASHER  
3. 1P-2878 [4] ROLLER  
4. 3P-3525 [2] BRACKET ASSEM.  
    (Each Includes)
5. 9F-2978 [2] NUT (weld)  
6. 1A-8827 [4] PIN  
7. 3B-4615 [8] COTTER PIN  
8. 7G-3338 C [2] ROD  
9. 9S-1354 [2] NUT  
10. 9S-1314 [2] END  
11. 9S-1315 [2] PIN  
  3B-4617 [2] COTTER PIN  
12. 9M-5884 [2] BUMPER  
13. 3P-2399 [2] LEVER  
14. 9H-3273 [1] SPACER 1.375 in.(3.49 cm) thick  
  6P-5472 [1] SPACER .80 in.(2.06 cm) thick  
15. 0S-0509 [1] BOLT  
16. 6P-6253 [1] LOCK  
17. 6P-5475 [1] SHAFT  
18. 6D-5974 [4] BEARING  
19. 1B-0676 [4] PIN  
20. 3P-4161 [2] BOOT  
21. 5J-3658 [2] ROD  
22. 5B-9079 [2] NUT  
23. 1M-1341 [2] END  
24. 6P-5079 [1] BELLCRANK- 5.28 in.(13.41 cm) thick  
  6P-5080 [1] BELLCRANK- 2.38 in.(6.05 cm) thick  
25. 6K-8088 [4] BEARING  
26. 002-1634 [8] SEAL  
  C   INDICATES CHANGE
 

#SEBP11160448
 

3P-5584: CONTROL GP-STEERING CLUTCH

3P5584 STEERING CLUTCH HYDRAULIC CONTROL GROUP--Side View--Part 1 of 2
Serial No. 92V2127 to 92V3165 inclusive
c205259 SEBP1116
3P5584 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-0829 [2] HANDLE  
2. 0T-0102 [4] BOLT  
3. 3B-4506 [5] LOCKWASHER  
4. 3P-3525 [2] BRACKET ASSEM.  
    (Each Includes)
5. 9F-2978 [2] NUT  
6. 1A-8827 [4] PIN  
7. 3B-4615 [10] COTTER PIN  
8. 3P-2695 [2] ROD  
9. 9S-1354 [2] NUT  
10. 9S-1314 [2] ROD END  
11. 9S-1315 [2] PIN  
  3B-4617 [2] COTTER PIN  
12. 9M-5884 [2] BUMPER  
13. 3P-2399 [2] LEVER  
14. 0S-0509 [1] BOLT  
15. 6P-6253 [1] LOCK  
16. [6] PIN  
17. 4D-8991 [2] ROD  
18. 5B-9079 [4] NUT  
19. 1M-1341 [4] ROD END  
20. 8M-4990 [1] SEAL  
21. 1S-0004 [2] SEAL  
22. 7M-7260 LIQUID GASKET  
 

#SEBP11160449
 

3P-5584: CONTROL GP-STEERING CLUTCH

3P5584 STEERING CLUTCH HYDRAULIC CONTROL GROUP--Top View--Part 2 of 2
Serial No. 92V2127 to 92V3165 inclusive
3P3564 Control Valve parts are shown on Page 156
c205376 SEBP1116
3P5584 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2472 [1] ELBOW  
2. 8M-4987 [2] SEAL  
3. 2S-4300 [1] TUBE ASSEM.  
4. 8M-4446 [2] SEAL  
5. 0L-1143 [2] BOLT  
6. 3B-4506 [10] LOCKWASHER  
7. 1B-0676 [2] PIN  
  3B-4615 [2] COTTER PIN  
8. 1M-1341 [2] ROD END  
9. 5B-9079 [4] NUT  
10. 3P-6906 [1] ROD  
11. [4] ROLLER  
12. 3P-3528 [1] BELLCRANK  
13. 6K-8088 [4] BEARING  
14. 9H-3273 [1] SPACER  
15. 6D-5974 [4] BEARING  
16. 3P-3952 [1] SHAFT  
17. 3P-3527 [1] BELLCRANK  
18. 1A-9252 [2] ROD END  
19. 3P-6904 [1] ROD  
20. 3D-8525 [2] LEVER  
  1B-8706 [2] KEY  
  0S-1588 [2] BOLT  
21. 3P-3564 Y [1] VALVE GROUP  
    (Separate Illustration)
22. 8M-4988 [2] SEAL  
23. 0L-2070 [4] BOLT  
24. 2S-4299 [1] TUBE ASSEM.  
25. 0S-1571 [4] BOLT  
26. 3S-2471 [1] ELBOW  
27. 5M-6214 [2] PLUG  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Caterpillar Parts SIS Catalog D7G :

2S-7100 FINAL DRIVE GP
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
SEGMENTED SPROCKET GROUP
8P-0061 SEGMENTED SPROCKET GROUP
6P-8688 SPROCKET SEGMENT GROUP
SPROCKET GP-SEGMENTED
8P-8170 SPROCKET GP-SEGMENTED
SPROCKET GP
9G-0008 SPROCKET GP
CONTROL GP-STEERING CLUTCH
6P-5657 CONTROL GP-STEERING CLUTCH
CONTROL GP-STEERING CLUTCH
6P-5657 CONTROL GP-STEERING CLUTCH
CONTROL GP-STEERING CLUTCH
3P-5584 CONTROL GP-STEERING CLUTCH

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.