AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5M3830 FRONT IDLER GROUP--Sectional View Serial No. 40U705 to 40U955 Inclusive Note: Quantities shown are those required for both R.H. and L.H. sides 572G


UNDERCARRIAGE
IDLER GP
OPERATOR STATION
PANEL GP
ELECTRICAL AND STARTING SYSTEM
PANEL GP-CIRCUIT BREAKER
OPERATOR STATION
PANEL GP

PIPELAYER 572G PIPELAYER 40U
 572G PIPELAYER 40U00411-00970 (MACHINE) POWERED BY 3306 ENGINE SEBP1119 572G 40U   (1975)

UNDERCARRIAGE

IDLER GP
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
 

#SEBP11190430
 

5M-3830: IDLER GP-FRONT

5M3830 FRONT IDLER GROUP--Sectional View
Serial No. 40U705 to 40U955 Inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
c172914 SEBP1119
5M3830 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1620 [2] BOLT  
2. 2S-1654 [2] WASHER  
3. 9M-3770 [2] NUT  
4. 1S-0876 [2] BOLT  
5. 2M-0369 [2] PILOT  
6. 3P-1885 [2] SPRING  
7. 5H-9475 [2] SPRING  
8. 8S-1061 [2] PILOT ASSEM.  
9. 6H-6269 [4] RING  
10. 8H-7980 [2] PISTON  
11. 2M-0125 [2] CYLINDER  
12. 5M-2997 [2] SEAL  
  5M-2998 [2] RING  
13. 1H-8397 [2] RING  
14. 4S-9006 [2] SEAL  
15. 5H-8624 [2] SEAL  
16. 2M-0398 [2] SLEEVE  
17. 7G-1902 C [2] BEARING (R.H. Inner-L.H. Outer)  
18. 4H-9105 [4] SEAL  
19. 2P-0347 [2] PLUG  
  1S-8947 [2] SEAL  
20. 8F-6711 [4] SEAL  
21. 3B-1915 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
22. 3P-8432 [4] BUSHING ASSEM.  
    (Each Includes)
  9B-2289 [2] PIN  
23. 8P-6651 [1] BEARING ASSEM.  
24. 1M-8747 R [4] SEAL GROUP  
    (Each Includes)
  8H-2262 [2] RING  
25. 7G-1900 C [48] SHIM  
26. 6P-6653 [4] PLATE  
27. 9M-9758 [2] SHAFT  
28. 5M-3806 [4] SPACER  
29. 7G-1901 C [2] BEARING (R.H. Outer-L.H. Inner)  
30. 7G-1899 C [12] SHIM  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP11190431
 

5M-3830: IDLER GP-FRONT

5M3830 FRONT IDLER GROUP--Side View
Serial No. 40U956-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
c304565 SEBP1119
5M3830 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-5925 [2] VALVE  
2. 5M-6708 [4] WASHER  
3. 2S-5926 [2] NUT  
4. 1S-5242 [2] PLATE  
  7B-3028 [8] SCREW  
5. 5M-3828 [2] YOKE ASSEM.  
6. 4B-1398 [8] PLATE  
7. 7M-5337 [2] GUARD (R.H. Outer-L.H. Inner)  
  7M-5338 [2] GUARD (R.H. Inner-L.H. Outer)  
8. 3B-4508 [8] LOCKWASHER  
  7F-0502 [8] WASHER  
9. 1S-8186 [2] IDLER ASSEM.  
  4F-5192 [4] NUT  
10. 5M-5000 [4] LOCK  
  3B-4507 [4] LOCKWASHER  
11. 1B-4367 [12] BOLT  
12. 3B-4510 [22] LOCKWASHER  
13. 7S-3224 [16] BOLT  
  2M-7116 [8] STRIP  
14. 4D-3704 [24] WASHER  
15. 7M-6571 [8] SPACER  
16. 6F-4991 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
17. 2B-7558 [4] CORK  
18. 7G-1903 C [4] COLLAR  
19. 2M-1163 [4] PLATE ASSEM.  
20. 4F-5003 [8] SPRING ASSEM.  
21. 0S-1587 [4] BOLT  
  2S-6313 [2] WASHER  
22. 2S-8610 [2] ROD GROUP  
    (Each Includes)
23. 2S-5927 [1] PLATE  
  7B-3028 [4] SCREW  
24. [10] BOLT  
  1D-4720 [10] NUT  
25. 2M-0401 [8] DOWEL  
26. 0S-1625 [8] BOLT  
27. 2M-0365 [2] STOP (R.H. Outer-L.H. Inner)  
  2M-0366 [2] STOP (R.H. Outer-L.H. Outer)  
28. 0S-1622 [8] BOLT  
  C   INDICATES CHANGE
 

#SEBP11190432
 

5M-3830: IDLER GP-FRONT

5M3830 FRONT IDLER GROUP--Sectional View--Part 2 of 2
Serial No. 40U956-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
c304566 SEBP1119
5M3830 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1620 [2] BOLT  
2. 2S-1654 [2] WASHER  
3. 9M-3770 [2] NUT  
4. 1S-0876 [2] BOLT  
5. 2M-0369 [2] PILOT  
6. 3P-1885 [2] SPRING  
7. 5H-9475 [2] SPRING  
8. 8S-1061 [2] PILOT ASSEM.  
9. 6H-6269 [4] RING  
10. 8H-7980 [2] PISTON  
11. 2M-0125 [2] CYLINDER  
12. 5M-2997 [2] SEAL  
  5M-2998 [2] RING  
13. 1H-8397 [2] RING  
14. 4S-9006 [2] SEAL  
15. 5H-8624 [2] SEAL  
16. 2M-0398 [2] SLEEVE  
17. 7G-1902 [2] BEARING (R.H. Inner-L.H. Outer)  
18. 4H-9105 [4] SEAL  
19. 2P-0347 [2] PLUG  
  1S-8947 [2] SEAL  
20. 8F-6711 [4] SEAL  
21. 3B-1915 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
22. 3P-8432 [4] BUSHING ASSEM.  
    (Each Includes)
  9B-2289 [2] PIN  
23. 8P-6651 [1] BEARING ASSEM.  
24. 1M-8747 R [4] SEAL GROUP  
    (Each Includes)
  8H-2262 [2] RING  
25. 7G-1900 [48] SHIM  
26. 6P-6653 [4] PLATE  
27. 9M-9758 [2] SHAFT  
28. 5M-3806 [4] SPACER  
29. 7G-1901 [2] BEARING (R.H. Outer-L.H. Inner)  
30. 7G-1899 [12] SHIM  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP11190433
 

9S-2326: WATER PRESSURE GAUGE GROUP

9S2326 WATER PRESSURE GAUGE GROUP
Provides Field Replacement for 2S1989 Gauge shown on Page 163
c111984 SEBP1119
9S2326 WATER PRESSURE GAUGE GROUP Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4131 [1] GAUGE (Water Pressure)  
2. 1P-8563 [1] NUT  
3. 1P-8561 [1] SLEEVE  
4. 1P-8560 [1] CONNECTOR  
  1P-9132 [1] ELBOW (90 degrees)  
    (Not Shown)
 

#SEBP11190434
 

3P-4615: METER GP-HOUR

3P4615 ELECTRIC HOUR METER GROUP
Serial No. 40U411 to 40U600 inclusive
AN ATTACHMENT
c211679 SEBP1119
3P4615 METER GP-HOUR Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-1454 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 CH WIRE 10.10 m(4 in.)  
2. 2L-8076 C [2] TERMINAL  
3. 1F-9369 C [1] TEE  
4. 2N-7744 C [1] SWITCH  
5. 5H-8840 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 CH WIRE .17 m(7 in.)  
6. 2L-8076 [2] TERMINAL  
7. 5D-0122 [1] WIRE ASSEM.  
    (Includes)
  5P-5629 CH WIRE .26 m(10.23 in.)  
8. 2L-8076 C [2] TERMINAL  
9. 4N-3700 [1] METER GROUP  
  C   INDICATES CHANGE
  H   ORDER BY THE METRE
 

#SEBP11190435
 

7N-8292: KIT-FUSE HOLDER

7N8292 FUSE HOLDER, FUSE AND WIRE KIT--Field Installation
Provides protection from overload failure of 6N5906 Hour Meter without sealed vent
holes. Those hour meters with vent holes have a white dash mark under two
central figures
c174551 SEBP1119
7N8292 KIT-FUSE HOLDER Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-1988 [1] TERMINAL  
2. 5P-5624 D WIRE .08M(3.15IN)  
3. 2S-5013 [1] SPRING-HOLDER  
4. 2S-6024 [1] FUSE (5 AMP)  
  2S-8708 [2] CONTACT-HOLDER  
5. 5P-5624 D WIRE .06M(2.36IN)  
6. 5P-4571 [1] TERMINAL  
  D   ORDER BY THE METER
 

#SEBP11190436
 

6P-4741: GAUGE GP

6P4741 GAUGE GROUP
Serial No. 40U411 to 40U600 inclusive
c226555 SEBP1119
6P4741 GAUGE GP Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-3272 [1] INDICATOR (fuel pressure)  
2. 1P-5486 [1] INDICATOR  
    (Torque Converter Oil Temp.)
3. 1P-5487 [1] INDICATOR (oil pressure)  
4. 2S-1989 C [1] GAUGE (water pressure)  
5. 4N-6943 [1] INDICATOR (water temp.)  
6. 8H-6912 [1] FITTING  
7. 3B-9001 [2] FITTING  
    (Each Includes)
  1F-1344 [1] NUT  
8. 5P-5630 CH TUBE .534 m(21 in.)  
9. 0L-2072 [1] CLIP  
10. 3D-5102 [3] GROMMET  
11. 5P-1198 J TUBE 71.3 cm(28.06 in.)  
12. 3B-8990 [1] FITTING  
    (Includes)
  1F-1344 [2] NUT  
13. 5P-1198 CJ TUBE 122 cm(47.50 in.)  
14. 4S-8990 [4] CLAMP  
  4S-8989 C [7] GROMMET  
15. 0S-1617 [3] BOLT  
16. 1P-8559 [1] CONNECTOR ASSEM.  
    (Includes)
  1P-8563 [1] NUT  
  1P-8561 [1] SLEEVE  
17. 2B-2404 [2] CLIP  
18. 6H-6699 [1] ADAPTER  
19. 3B-8995 [1] FITTING  
    (Includes)
  1F-1344 [1] NUT  
20. 1F-7552 [1] FITTING  
    (Includes)
  1F-1344 [1] NUT  
21. 5P-1198 J TUBE 63.3 cm(24.92 in.)  
22. 5B-1959 [1] ADAPTER  
  2B-5721 [1] GASKET  
23. 6H-3068 [1] CLIP  
  8F-0244 [1] GROMMET  
24. 0T-0102 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
25. 9M-0621 [1] CLAMP  
  9M-3771 [2] GROMMET  
26. 7S-0687 [1] INDICATOR (air filter)  
27. 1P-6886 [1] ADAPTER  
28. 8M-9937 [2] BOLT  
  3K-6116 [2] WASHER  
29. 1M-3010 [1] FITTING  
  C   INDICATES CHANGE
  J   ORDER BY THE CENTIMETER
  H   ORDER BY THE METER
 

#SEBP11190437
 

6P-4741: GAUGE GP

6P4741 GAUGE GROUP--Part 1 of 2
Serial No. 40U601 to 40U752 inclusive
c170193 SEBP1119
6P4741 GAUGE GP Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-1959 [1] ADAPTER  
  2B-5721 [1] GASKET  
2. 6H-3068 [1] CLIP  
  8F-0244 [1] GROMMET  
3. 5P-1198 J TUBE 63.3 cm (24.92 in.)  
4. 1F-7552 [1] FITTING  
    (Includes)
  1F-1344 [1] NUT  
5. 0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
6. 9M-0621 [1] CLAMP  
  9M-3771 [2] GROMMET  
7. 2B-2404 [2] CLIP  
8. 3D-5102 [2] GROMMET  
9. 5P-1198 J TUBE 71.3 cm (28.06 in.)  
10. 3B-8990 [1] FITTING  
    (Includes)
  1F-1344 [2] NUT  
11. 5P-1198 J TUBE 122 cm (47.50 in.)  
12. 4S-8990 [3] CLAMP  
  4S-8989 [6] GROMMET  
13. 0S-1617 [3] BOLT  
14. 6H-6699 [1] ADAPTER  
15. 3B-8995 [1] FITTING  
    (Includes)
  1F-1344 [1] NUT  
  J   ORDER BY THE CENTIMETRE
 

#SEBP11190438
 

6P-4741: GAUGE GP

6P4741 GAUGE GROUP--Part 2 of 2
Serial No. 40U601 to 40U752 inclusive
c170893 SEBP1119
6P4741 GAUGE GP Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7083 C [1] INDICATOR (water temp.)  
2. 8F-0390 C [1] ADAPTER  
3. 5P-3422 C [1] TEE  
4. 8H-6912 [1] FITTING  
5. 8P-9364 C [1] WIRE ASSEM.  
    (Includes)
  5P-5624 H WIRE .152 m (6.00 in.)  
  2L-8079 [3] TERMINAL  
6. 5P-5694 [1] CONNECTOR  
7. 6P-5759 C [1] WIRE ASSEM.  
    (Includes)
  H WIRE .152 m (6.00 in.)  
  2L-8076 [1] TERMINAL  
  2S-5014 [1] CONTACT  
8. 2S-5012 [1] CAP  
9. 7S-0687 [1] INDICATOR (air filter)  
10. 1P-6886 [1] ADAPTER  
11. 4M-5281 C [2] BOLT  
  3K-6116 [2] WASHER  
12. 1M-3010 [1] FITTING  
13. 8P-9365 C [1] WIRE ASSEM.  
    (Includes)
  H WIRE .152 m (6.00 in.)  
  2L-8076 [1] TERMINAL  
14. 2S-5011 [1] BODY  
  2S-5013 [1] SPRING  
  2S-5014 [1] CONTACT  
15. 2S-6024 C [1] FUSE (5 amp)  
16. 0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
17. 8P-9363 C [1] WIRE ASSEM.  
    (Includes)
  H WIRE .152 m (6.00 in.)  
  2L-8075 [1] TERMINAL  
18. 5P-4571 [1] TERMINAL  
19. 6N-3272 [1] INDICATOR (fuel pressure)  
20. 2N-7744 C [1] SWITCH  
21. 1P-5486 [1] INDICATOR  
    (Torque Converter Oil Temp.)
22. 1P-5487 [1] INDICATOR (oil pressure)  
23. 6N-5906 C [1] SERVICE METER  
    (Includes)
  4S-1988 [1] TERMINAL  
  5P-4571 [1] TERMINAL  
24. 5P-0580 H TUBE .534 m (21 in.)  
25. 3B-9001 [2] FITTING  
    (Each Includes)
  1F-1344 [1] NUT  
26. 4S-8990 [1] CLAMP  
  4S-8989 [1] GROMMET  
27. 3D-5102 [1] GROMMET  
  0L-2072 [1] CLIP  
  C   INDICATES CHANGE
  H   ORDER BY THE METRE
 

#SEBP11190439
 

6P-4741: GAUGE GP

6P4741 GAUGE GROUP--Part 1 of 2
Serial No. 40U753 to 40U898 inclusive
c172812 SEBP1119
6P4741 GAUGE GP Parts scheme
  For full view, you need register

Parts for your 572G PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-1959 [1] ADAPTER  
  2B-5721 [1] GASKET  
2. 6H-3068 [1] CLIP  
  8F-0244 [1] GROMMET  
3. 5P-1198 J TUBE 63.3 cm (24.92 in.)  
4. 1F-7552 [1] FITTING  
    (Includes)
  1F-1344 [1] NUT  
5. 0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
6. 9M-0621 [1] CLAMP  
  9M-3771 [2] GROMMET  
7. 2B-2404 [2] CLIP  
8. 3D-5102 [2] GROMMET  
9. 5P-1198 J TUBE 71.3 cm (28.06 in.)  
10. 3B-8990 [1] FITTING  
    (Includes)
  1F-1344 [2] NUT  
11. 5P-1198 J TUBE 122 cm (47.50 in.)  
12. 4S-8990 [3] CLAMP  
  4S-8989 [6] GROMMET  
13. 0S-1617 [3] BOLT  
14. 6H-6699 [1] ADAPTER  
15. 3B-8995 [1] FITTING  
    (Includes)
  1F-1344 [1] NUT  
16. 3B-7764 C [1] BUSHING  
  C   INDICATES CHANGE
  J   ORDER BY THE CENTIMETER
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Service Magazine
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Caterpillar Parts SIS Catalog 572G :

IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
GUARD GP-TRACK ROLLER FRAME
5M-4775 GUARD GP-TRACK ROLLER FRAME
TRACK GP
3P-0961 TRACK GP
TRACK GP
3P-0959 TRACK GP
TRACK ROLLER GP-DOUBLE FLANGE
8S-2933 TRACK ROLLER GP-DOUBLE FLANGE
TRACK ROLLER
6P-9885 TRACK ROLLER
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
IDLER GP-FRONT
5M-3830 IDLER GP-FRONT
WATER PRESSURE GAUGE GROUP
9S-2326 WATER PRESSURE GAUGE GROUP
METER GP-HOUR
3P-4615 METER GP-HOUR
KIT-FUSE HOLDER
7N-8292 KIT-FUSE HOLDER
GAUGE GP
6P-4741 GAUGE GP
GAUGE GP
6P-4741 GAUGE GP
GAUGE GP
6P-4741 GAUGE GP

Truck sale:

Caterpillar 572G
 
Caterpillar 572G
- pipelayers
HOLT CAT
Caterpillar 572G
 
Caterpillar 572G
- pipelayers
HOLT CAT
 
48,800 
Caterpillar 572G, Construction
- pipelayers
EMPIRE MACHINERY
CATERPILLAR 572G 1984
 
CATERPILLAR 572G 1984
- PIPELAYERS
PIPELINE MACHINERY
15434 Cypress North Houston - Cypress -
1985 CAT 572G
USD $172,000 
1985 CAT 572G

Carmody Crane LLC.
Temecula, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.