AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5M7751 FINAL DRIVE GROUP-Lower Half-Part 2 of 2 Serial No. 3X1 to 3X524 inclusive 8P8914 Segmented Sprocket parts are shown on Page 111 D6D


POWER TRAIN
DRIVE GP-FINAL
STEERING AND BRAKING SYSTEM
CLUTCH & BRAKE GP-STEERING

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 03X
 D6D TRACTOR / DIRECT DRIVE / 03X00001-01008 (MACHINE) POWERED BY 3306 ENGINE SEBP1138 D6D 03X   (1977)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
 

#SEBP11380280
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Lower Half-Part 2 of 2
Serial No. 3X1 to 3X524 inclusive
8P8914 Segmented Sprocket parts are shown on Page 111
c213003 SEBP1138
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-1897 [2] GEAR (51 teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    - OR -
  5P-0374 L [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  5S-4017 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  5M-6630 [2] CAGE  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  1F-1006 [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 [2] CUP  
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  1A-7486 [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 [2] HOLDER ASSEM.  
  5M-6632 [2] GASKET  
  7B-3235 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  5M-6627 [2] SEAL  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 CY [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  L   NOT PART OF FINAL DRIVE AND WH
 

#SEBP11380281
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Upper Half-Part 1 of 2
Serial No. 3X525 to 3X818, 821 to 3X824 inclusive
c215605 SEBP1138
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  3B-4510 [24] LOCKWASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING  
    (2 in Each Seal Group 2P3395)
  3P-7236 [2] GASKET  
  0L-2341 [2] NUT  
  2P-2810 [4] INNER RACE  
  5M-6704 [2] LOCK  
  1K-6705 [2] BOLT  
  6B-5163 [4] OUTER RACE AND ROLLER ASSEM.  
  0S-1585 [12] BOLT (1.75 in. long)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  9S-8669 [2] INNER RACE  
  6B-5067 [2] OUTER RACE AND ROLLER ASSEM.  
  1S-4974 [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  5S-0192 [2] PINION (12 teeth)  
    USE 7M7260 GASKET SOLUTION
  2P-3421 [2] RETAINER  
  2P-3423 [2] PINION (10 Teeth)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 C [1] CASE (R.H)  
  9P-0567 C [1] CASE (L.H.)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 C [2] INNER RACE  
  5P-5066 C [2] BEARING  
  2P-3422 [2] GEAR (38 teeth)  
  C   INDICATES CHANGE
 

#SEBP11380282
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Lower Half-Part 2 of 2
Serial No. 3X525 to 3X818, 821 to 3X824 inclusive
8P8914 Segmented Sprocket parts are shown on Page 111
c238273 SEBP1138
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-1897 [2] GEAR (51 teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    - OR -
  5P-0374 Q [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 C [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  5M-6630 [2] CAGE  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  1F-1006 [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 [2] CUP  
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  1A-7486 [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 C [2] HOLDER ASSEM.  
  5M-6632 C [2] GASKET  
  7B-3235 C [12] BOLT  
  3B-4508 C [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  5M-6627 [2] SEAL  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  Q   NOT PART OF FINAL DRIVE AND WH
 

#SEBP11380283
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Upper Half-Part 1 of 2
Serial No. 3X819, 3X820, 825 to 916 and 3X941 to 3X951 inclusive
c174174 SEBP1138
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  3B-4510 [24] LOCKWASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING  
    (2 in Each Seal Group 2P3395)
  6V-0530 C [2] NUT  
  3P-7236 [2] GASKET  
  5P-9177 C [4] RACE  
  7G-6986 C [2] LOCK  
  0S-1583 C [4] BOLT  
  5P-8248 C [4] WASHER  
  5P-9176 C [4] BEARING  
  0S-1585 [12] BOLT (1.75 in. long)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  6V-1013 C [2] BEARING  
  6V-1014 C [2] RACE  
  1S-4974 [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  7G-5323 C [2] PINION (12 teeth)  
    USE 7M7260 GASKET SOLUTION
  2P-3421 [2] RETAINER  
  2P-3423 [2] PINION (10 Teeth)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 [1] CASE (R.H)  
  9P-0567 [1] CASE (L.H.)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 [2] INNER RACE  
  5P-5066 [2] BEARING  
  2P-3422 [2] GEAR (38 teeth)  
  C   INDICATES CHANGE
 

#SEBP11380284
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Lower Half-Part 2 of 2
Serial No. 3X819, 3X820, 825 to 916 and 3X941 to 3X951 inclusive
8P8914 Segmented Sprocket parts are shown on Page 111
c238274 SEBP1138
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-1897 [2] GEAR (51 teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    - OR -
  5P-0374 Q [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  7G-6042 C [2] CAGE ASSEM.  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  8M-6521 C [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 K [2] CUP  
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  7F-2339 C [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 C [2] HOLDER ASSEM.  
  5M-6632 C [2] GASKET  
  7B-3235 C [12] BOLT  
  3B-4508 C [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  5M-6627 [2] SEAL  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  Q   NOT PART OF FINAL DRIVE AND WH
  K   PART OF 7G6042 ASSEM.
 

#SEBP11380285
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Upper Half-Part 1 of 2 Serial No. 3X917 to 940 and 3X952-Up
c176638 SEBP1138
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  4D-3704 C [24] WASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING  
    (2 in Each Seal Group 2P3395)
  6V-0530 [2] NUT  
  3P-7236 [2] GASKET  
  5P-9177 C [4] RACE  
  7G-6986 [2] LOCK  
  0S-1583 [4] BOLT  
  5P-8248 [4] WASHER  
  5P-9176 [4] BEARING  
  0S-1585 [12] BOLT (1.75 in. long)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  6V-1013 [2] BEARING  
  6V-1014 [2] RACE  
  1S-4974 [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  9P-9362 C [2] PINION (11 teeth)  
    USE 7M7260 GASKET SOLUTION
  2P-3421 [2] RETAINER  
  9P-9363 C [2] PINION (9 teeth)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 [1] CASE (R.H)  
  9P-0567 [1] CASE (L.H.)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 [2] INNER RACE  
  5P-5066 [2] BEARING  
  9P-9360 C [2] GEAR (35 teeth)  
  C   INDICATES CHANGE
 

#SEBP11380286
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Lower Half-Part 2 of 2
Serial No. 3X917 to 940 and 3X952-Up
8P8914 Segmented Sprocket parts are shown on Page 111
c238275 SEBP1138
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9P-9361 C [2] GEAR (46 teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    - OR -
  5P-0374 Q [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  7G-6042 [2] CAGE ASSEM.  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  8M-6521 [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 K [2] CUP  
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  7F-2339 [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 C [2] HOLDER ASSEM.  
  5M-6632 C [2] GASKET  
  7B-3235 C [12] BOLT  
  3B-4508 C [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  Q   NOT PART OF FINAL DRIVE AND WH
  C   INDICATES CHANGE
  K   PART OF 7G6042 ASSEM.
 

#SEBP11380287
 

8P-5200: CONTROL GP-STEERING CLUTCH

8P5200 STEERING CLUTCH CONTROL GROUP-Part 1
Serial No. 3X1 to 3X690 inclusive
c212811 SEBP1138
8P5200 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-0829 [2] HANDLE  
2. 0T-0102 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
3. 1P-2878 [4] ROLLER  
4. 8P-3410 [2] ROD  
5. 9S-1354 [2] NUT  
6. 4K-5563 [2] END  
7. 9S-1315 [2] PIN  
  3B-4617 [2] COTTER PIN  
8. 9M-5884 [2] BUMPER  
9. 8P-3262 [1] LEVER (R.H.)  
  8P-3261 [1] LEVER (L.H.)  
  6K-8088 [4] BEARING  
10. 1M-1341 [2] ROD END  
11. 8P-2971 [2] ROD  
12. 2K-0400 [2] YOKE END  
13. 1B-0676 [6] PIN  
14. 3B-4615 [10] COTTER PIN  
15. 3D-8525 [1] LEVER  
16. 1B-8706 [2] KEY  
17. 8M-4990 [1] SEAL  
18. 0S-1588 [2] BOLT  
19. 1S-0004 [1] SEAL  
20. 8M-4987 [2] SEAL  
21. 7M-7260 LIQUID GASKET  
22. 8P-3205 [1] LEVER  
23. 5B-9079 [4] NUT  
24. 8P-9821 [4] WASHER (spring)  
  9S-1328 [4] WASHER (spring)  
25. 1A-8827 [4] PIN  
26. 8P-3409 [1] BRACKET ASSEM.  
    (Each Includes)
27. 9F-2978 [2] NUT  
 

#SEBP11380288
 

8P-5200: CONTROL GP-STEERING CLUTCH

8P5200 STEERING CLUTCH CONTROL GROUP-Part 2
Serial No. 3X1 to 3X690 inclusive
8P4364 Valve parts are shown on Page 116
c212812 SEBP1138
8P5200 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT  
2. 3B-4506 [10] LOCKWASHER  
3. 2S-4302 [1] TUBE ASSEM.  
4. 8M-4446 [2] SEAL  
5. 0L-2070 [2] BOLT  
6. 1A-2029 [2] BOLT  
7. 1M-1341 [2] YOKE END  
8. 5B-9079 [4] NUT  
9. 8P-4364 Y [1] VALVE GROUP  
    (Separate Illustration)
10. 8P-2519 [1] ROD  
11. 1A-9252 [2] YOKE END  
12. 1B-0676 [2] PIN  
  3B-4615 [2] COTTER PIN  
13. 6K-8088 [4] BEARING  
14. 8P-2506 [1] BELLCRANK  
15. 8P-2505 [1] BELLCRANK  
16. 8P-2517 [1] ROD  
17. 0L-1143 [2] BOLT  
18. 8M-4445 [2] SEAL  
19. 2S-4301 [1] TUBE ASSEM.  
20. 5M-6214 [2] PLUG  
21. 3S-2061 [1] ELBOW  
22. 3S-2062 [1] ELBOW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP11380289
 

8P-5200: CONTROL GP-STEERING CLUTCH

8P5200 STEERING CLUTCH CONTROL GROUP-Part 1
Serial No. 3X691-Up
c172603 SEBP1138
8P5200 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-0829 [2] HANDLE  
2. 0T-0102 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
3. 1P-2878 [4] ROLLER  
4. 8P-3410 [2] ROD  
5. 9S-1354 [2] NUT  
6. 4K-5563 [2] END  
7. 7H-9397 C [2] PIN  
8. 9M-5884 [2] BUMPER  
9. 8P-3262 [1] LEVER (R. H.)  
  8P-3261 [1] LEVER (L. H.)  
  6K-8088 [4] BEARING  
10. 1M-1341 [2] ROD END  
11. 8P-2971 [2] ROD  
12. 2K-0400 [2] YOKE END  
13. 1B-0676 [6] PIN  
14. 3B-4615 [10] COTTER PIN  
15. 3D-8525 [1] LEVER  
16. 1B-8706 [2] KEY  
17. 8M-4990 [1] SEAL  
18. 0S-1588 [2] BOLT  
19. 1S-0004 C [2] SEAL  
20. 8M-4987 [2] SEAL  
21. 7M-7260 LIQUID GASKET  
22. 8P-3205 [1] LEVER  
23. 5B-9079 [4] NUT  
24. 8P-9821 [4] WASHER (spring)  
  9S-1328 [4] WASHER (spring)  
25. 1A-8827 [4] PIN  
26. 8P-3409 [1] BRACKET ASSEM.  
    (Each Includes)
27. 9F-2978 [2] NUT  
28. 1H-1200 C [2] PIN  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Caterpillar Parts SIS Catalog D6D :

FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
SPROCKET GP-SEGMENTED
8P-8914 SPROCKET GP-SEGMENTED
VALVE GP-RELIEF
8P-1672 VALVE GP-RELIEF
PUMP GP-GEAR
3P-6814 PUMP GP-GEAR
LINES GP-POWER TRAIN OIL
8P-5222 LINES GP-POWER TRAIN OIL
LINES GP-POWER TRAIN OIL
8P-5222 LINES GP-POWER TRAIN OIL
LINES GP-POWER TRAIN OIL
8P-5222 LINES GP-POWER TRAIN OIL
LINES GP-POWER TRAIN OIL
8P-5222 LINES GP-POWER TRAIN OIL
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
CONTROL GP-STEERING CLUTCH
8P-5200 CONTROL GP-STEERING CLUTCH
CONTROL GP-STEERING CLUTCH
8P-5200 CONTROL GP-STEERING CLUTCH

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.