8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-L.H.-Side View- Part 2 of 3-Type 1 Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT D5B

OPERATOR STATION

ROPS/FOPS GP

0. 8P-2126 ROLL-OVER
1. 8P-2126 ROLL-OVER
2. 8P-2126 ROLL-OVER
3. 8P-2126 ROLL-OVER
4. 8P-2126 ROLL-OVER
5. 8P-2126 ROLL-OVER
6. 8P-2126 ROLL-OVER
7. 8P-2126 ROLL-OVER
8. 8P-2126 ROLL-OVER
9. 8P-2126 ROLL-OVER
0. INFORMATION

TRACK-TYPE TRACTOR D5B TRACK-TYPE TRACTOR 22X
D5B TRACTOR / DIRECT DRIVE / 22X00001-00438 (MACHINE) POWERED BY 3306 ENGINE SEBP1153 D5B 22X (1978)

OPERATOR STATION

ROPS/FOPS GP

8P-2125 ROLL-OVER PROTECTIVE SYSTEM ARRANGEMENT

8P-2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP

#SEBP11530390

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-L.H.-Side View-
Part 2 of 3-Type 1
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c178973 SEBP1153

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP Parts scheme

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8P-9736 C	[1]	DOOR ASSEM. (R.H.)
	8P-9779 C	[1]	DOOR ASSEM. (L H.)
	8P-9588	[4]	SHIM (use as required)
2.	4D-6082	[2]	BOLT
	4B-4280	[2]	WASHER
3.	3B-4610	[4]	COTTER PIN
4.	0L-1351	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
	4B-4278	[4]	WASHER
5.	8P-9591	[1]	ARM ASSEM. (L.H.)
	8P-9594	[1]	ARM ASSEM. (R.H.)
6.	8P-4069	[1]	GLASS
7.	5P-5768 D		SEAL (use as required)
8.	9M-5884	[8]	BUMPER
9.	016-7150	[3]	SCREW
10.	9P-5389	[1]	ANGLE
11.	5P-5640 D		SEAL 2.9 m(114.11 in.)
12.	1B-2713	[18]	BOLT
	7H-8909	[16]	NUT
	4B-4276	[18]	WASHER 1.66mm(.065 in.)thick
	8M-2337	[16]	WASHER 3.05mm(.120 in.)thick
13.	8P-3326	[1]	GLASS
14.	9P-1222	[1]	DOOR ASSEM.
15.	8P-3325	[1]	GLASS
16.	5P-5638 D		SEAL 1.25 m(49.22 in.)
17.	4F-7957	[8]	BOLT
	3B-4504	[8]	LOCKWASHER
18.	9P-1579	[2]	COVER
19.	9P-1811	[1]	COVER
	9P-1810	[1]	GASKET
20.	0S-0509	[2]	BOLT
	3B-4506	[2]	LOCKWASHER
21.	9P-7844 C	[4]	PLATE
22.	9P-7845 C	[8]	SHIM 1.6 mm(.063 in.) thick
	9P-7846 C	[8]	SHIM .8 mm(.031 in.) thick
23.	7D-6921 C	[8]	SCREW
	8F-8052 C	[8]	LOCKWASHER
	C		INDICATES CHANGE
	D		ORDER BY THE METER

#SEBP11530391

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-Front View-
Part 3 of 3-Type 1
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c212841 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[5]	BOLT 2.54 cm(1 in.) long
2.	1D-4717	[3]	NUT
3.	3B-4506	[9]	LOCKWASHER
4.	9P-5052	[1]	PLATE ASSEM. (rear inside)
	9P-5053	[1]	PLATE (rear outside)
	9P-2639	[2]	GASKET
5.	0S-0509	[4]	BOLT 1.9 cm (.75 in.) long
6.	0T-0102	[3]	BOLT
	5P-1075	[3]	WASHER
7.	8P-3142	[3]	BRACKET ASSEM.
8.	0S-1614	[5]	BOLT
	4B-4276	[5]	WASHER
9.	3B-4504	[19]	LOCKWASHER
10.	5P-5768 D		SEAL (use as required)
11.	8P-3762	[1]	GLASS
12.	8P-3366	[1]	GLASS
13.	8P-3763	[1]	GLASS
14.	8P-3880	[1]	PLATE
	8P-3881	[1]	GASKET
15.	4F-7957	[14]	BOLT
16.	5P-7520	[2]	FASTENER GROUP
17.	8P-3487	[1]	DOOR
18.	8L-6521	[3]	BOLT
	4B-2049	[3]	NUT
	3B-4502	[3]	LOCKWASHER
	4B-4274	[6]	WASHER
19.	9P-1034	[1]	PLATE
	D		ORDER BY THE METER

#SEBP11530392

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-R.H.-Side View-
Part 1 of 3-Type 2
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c218790 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-9591 C	[2]	HANDLE ASSEM.
			(Each Includes)
	9D-1447	[1]	KEY
2.	5P-9610 C	[2]	SPACER
3.	0S-1615	[6]	BOLT
4.	9P-1395	[1]	COVER ASSEM. (R.H)
	9P-1396	[1]	COVER ASSEM. (L.H.)
5.	3H-9675	[4]	PIN
6.	8P-3900	[1]	CAB ASSEM.
			(Includes)
7.	8P-3898	[2]	DUCT
	7K-6536	[8]	RIVET
8.	8P-3325	[1]	GLASS
9.	5P-5768 D		SEAL (use as required)
10.	9P-1224	[1]	DOOR ASSEM.
11.	8P-3326	[1]	GLASS
12.	8P-4069	[1]	GLASS
13.	9P-0435	[2]	HANDLE
14.	9P-0436	[2]	LEVER ASSEM.
15.	4H-3521	[2]	SPRING
16.	5P-8527 C	[2]	STRIKER
17.	0S-1616	[4]	BOLT
18.	4B-4276 C	[6]	WASHER
19.	9P-1145	[2]	PLATE
	9P-1200		SHIM 1.9 mm(.074 in.)
20.	8P-3327	[2]	PLATE
21.	5P-5939 CD		SEAL 2.6 m(102.36 in.)
22.	7B-2742	[8]	BOLT
	2D-6235	[8]	NUT
23.	5P-5829 C	[1]	LATCH (R.H.)
	5P-5828 C	[1]	LATCH (L.H.)
24.	5P-5582	[4]	SCREW
	3F-1147	[4]	LOCKWASHER
25.	9P-6894	[2]	LEVER
	9P-6895	[4]	PIN
	3B-4606	[4]	COTTER PIN
26.	3B-4504	[10]	LOCKWASHER
27.	9N-0869 C	[4]	WASHER
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER

#SEBP11530393

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-L.H. Side View-
Part 2 of 3-Type 2
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c178974 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8P-9736 C	[1]	DOOR ASSEM. (R.H.)
	8P-9779 C	[1]	DOOR ASSEM. (L.H.)
	8P-9588	[4]	SHIM (use as required)
2.	4D-6082	[2]	BOLT
	4B-4280	[2]	WASHER
3.	3B-4610	[4]	COTTER PIN
4.	0L-1351	[4]	BOLT
	4B-4278	[4]	WASHER
5.	8P-9591	[1]	ARM ASSEM. (L.H.)
	8P-9594	[1]	ARM ASSEM. (R.H.)
6.	8P-4069	[1]	GLASS
7.	5P-5768 D		SEAL (use as required)
8.	9M-5884	[8]	BUMPER
9.	016-7150	[3]	SCREW
10.	9P-5389	[1]	ANGLE
11.	5P-5640 D		SEAL 2.9 m(114.11 in.)
12.	1B-2713	[18]	BOLT
	7H-8909	[16]	NUT
	4B-4276	[18]	WASHER 1.66mm(.065 in.) thick
	8M-2337	[16]	WASHER 3.05mm(.120 in.) thick
13.	8P-3326	[1]	GLASS
14.	9P-1222	[1]	DOOR ASSEM.
15.	8P-3325	[1]	GLASS
16.	5P-5939 CD		SEAL 1.25 m (49.22 in.)
17.	7D-6921	[8]	SCREW
	8F-8052	[8]	LOCKWASHER
18.	9P-7845	[8]	SHIM 1.6 mm (.063 in.) thick
	9P-7846	[8]	SHIM .8 mm (.031 in.) thick
19.	9P-1811	[1]	COVER
	9P-1810	[1]	GASKET
20.	0S-0509	[2]	BOLT
21.	9P-7844	[4]	PLATE
22.	3B-4506	[6]	LOCKWASHER
	C		INDICATES CHANGE
	D		ORDER BY THE METER

#SEBP11530394

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-Front View-
Part 3 of 3-Type 2
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c222616 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594 C	[3]	BOLT 2.54 cm (1 in.) long
2.	1D-4717	[3]	NUT
3.	3B-4506 C	[3]	LOCKWASHER
4.	5P-7518 C	[2]	RETAINER
5.	5P-7519 C	[2]	NUT
6.	5P-9034 C	[2]	STUD
7.	8P-3142	[3]	BRACKET ASSEM.
8.	8L-6521 C	[5]	BOLT
	4B-2049 C	[5]	NUT
	3B-4502 C	[5]	LOCKWASHER
	4B-4274 C	[10]	WASHER
9.	3B-4504 C	[14]	LOCKWASHER
10.	5P-5768 D		SEAL (use as required)
11.	8P-3762	[1]	GLASS
12.	9P-7854 C	[1]	DOOR
13.	8P-3763	[1]	GLASS
14.	8P-3880	[1]	PLATE
	8P-3881	[1]	GASKET
15.	4F-7957	[14]	BOLT
16.	9P-9385 C	[1]	WINDOW ASSEM.
			(Includes)
	9P-9387	[1]	GLASS
17.	5P-8918 D		SEAL 1.3 m (51.19 in.)
18.	5P-5680 D		SEAL 2.54 m (100 in.)
19.	9P-7856	[1]	KNOB
	C		INDICATES CHANGE
	D		ORDER BY THE METER

#SEBP11530395

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-R.H. Side View-
Part 1 of 3-Type 3
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c224178 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-9591	[2]	HANDLE ASSEM.
			(Each Includes)
	9D-1447	[1]	KEY
2.	5P-9610	[2]	SPACER
3.	0S-1615	[6]	BOLT
4.	9P-1395	[1]	COVER ASSEM. (R.H.)
	9P-1396	[1]	COVER ASSEM. (L.H.)
5.	000-5606 C	[4]	PIN
6.	8P-3900	[1]	CAB ASSEM.
			(Includes)
7.	8P-3898	[2]	DUCT
	7K-6536	[8]	RIVET
8.	8P-3325	[1]	GLASS
9.	5P-5768 D		SEAL (use as required)
10.	9P-1224	[1]	DOOR ASSEM.
11.	8P-3326	[1]	GLASS
12.	8P-4069	[1]	GLASS
13.	9P-0435	[2]	HANDLE
14.	9P-0436	[2]	LEVER ASSEM.
15.	4H-3521	[2]	SPRING
16.	6V-1155 C	[2]	STRIKER ASSEM.
17.	0S-1616	[4]	BOLT
18.	4B-4276	[6]	WASHER
19.	9P-1145	[2]	PLATE
	9P-1200	[6]	SHIM 1.9 mm(.074 in.)
20.	8P-3327	[2]	PLATE
21.	5P-5939 D		SEAL 2.6 m(102.36 in.)
22.	7B-2742	[8]	BOLT
	2D-6235	[8]	NUT
23.	6V-1157 C	[1]	LATCH (R.H.)
	6V-1156 C	[1]	LATCH (L.H.)
24.	6V-1251 C	[4]	SCREW
	3F-1147	[4]	LOCKWASHER
25.	9P-6894	[2]	LEVER
	9P-6895	[4]	PIN
	3B-4606	[4]	COTTER PIN
26.	3B-4504	[10]	LOCKWASHER
27.	9N-0869	[4]	WASHER
	C		INDICATES CHANGE
	D		ORDER BY THE METER

#SEBP11530396

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-L.H. Side View-
Part 2 of 3-Type 3
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c178975 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8P-9736 C	[1]	DOOR ASSEM. (R.H.)
	8P-9779 C	[1]	DOOR ASSEM. (L.H.)
	8P-9588	[4]	SHIM (use as required)
2.	4D-6082	[2]	BOLT
	4B-4280	[2]	WASHER
3.	3B-4610	[4]	COTTER PIN
4.	0L-1351	[4]	BOLT
	4B-4278	[4]	WASHER
5.	8P-9591	[1]	ARM ASSEM. (L.H.)
	8P-9594	[1]	ARM ASSEM. (R.H.)
6.	8P-4069	[1]	GLASS
7.	5P-5768 D		SEAL (use as required)
8.	9M-5884	[8]	BUMPER
9.	016-7150	[3]	SCREW
10.	9P-5389	[1]	ANGLE
11.	5P-5640 D		SEAL 2.9 m(114.11 in.)
12.	1B-2713	[18]	BOLT
	7H-8909	[16]	NUT
	4B-4276	[18]	WASHER 1.66mm(.065 in.)thick
	8M-2337	[16]	WASHER 3.05mm(.120 in.)thick
13.	8P-3326	[1]	GLASS
14.	9P-1222	[1]	DOOR ASSEM.
15.	8P-3325	[1]	GLASS
16.	5P-5939 D		SEAL 1.25 m (49.22 in.)
17.	7D-6921	[8]	SCREW
	8F-8052	[8]	LOCKWASHER
18.	9P-7845	[8]	SHIM 1.6 mm (.063 in.) thick
	9P-7846	[8]	SHIM .8 mm (.031 in.) thick
19.	9P-1811	[1]	COVER
	9P-1810	[1]	GASKET
20.	0S-0509	[2]	BOLT
21.	9P-7844	[4]	PLATE
22.	3B-4506	[6]	LOCKWASHER
	C		INDICATES CHANGE
	D		ORDER BY THE METER

#SEBP11530397

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-Front View-
Part 3 of 3-Type 3
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c224180 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[3]	BOLT 2.54 cm (1 in.) long
2.	1D-4717	[3]	NUT
3.	3B-4506	[3]	LOCKWASHER
4.	5P-7518	[2]	RETAINER
5.	5P-7519	[2]	NUT
6.	5P-9034	[2]	STUD
7.	8P-3142	[3]	BRACKET ASSEM.
8.	8L-6521	[5]	BOLT
	4B-2049	[5]	NUT
	3B-4502	[5]	LOCKWASHER
	4B-4274	[10]	WASHER
9.	3B-4504	[14]	LOCKWASHER
10.	5P-5768 D		SEAL (use as required)
11.	8P-3762	[1]	GLASS
12.	9P-7854	[1]	DOOR
13.	8P-3763	[1]	GLASS
14.	8P-3880	[1]	PLATE
	8P-3881	[1]	GASKET
15.	4F-7957	[14]	BOLT
16.	9P-9385	[1]	WINDOW ASSEM.
			(Includes)
	9P-9387	[1]	GLASS
17.	5P-8918 D		SEAL 1.3 m (51.19 in.)
18.	5P-5680 D		SEAL 2.54 m (100 in.)
19.	9P-7856	[1]	KNOB
	D		ORDER BY THE METER

#SEBP11530398

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-R.H. Side View-
Part 1 of 3-Type 4
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c176013 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-1994 C	[2]	HANDLE ASSEM.
			(Each Includes)
	5K-4340	[1]	KEY
2.	5P-9610	[2]	SPACER
3.	0S-1615	[6]	BOLT
4.	9P-1395	[1]	COVER ASSEM. (R.H.)
	9P-1396	[1]	COVER ASSEM. (L.H.)
5.	000-5606 C	[4]	PIN
6.	8P-3900	[1]	CAB ASSEM.
			(Includes)
7.	8P-3898	[2]	DUCT
	7K-6536	[8]	RIVET
8.	8P-3325	[1]	GLASS
9.	5P-5768 D		SEAL (use as required)
10.	9P-1224	[1]	DOOR ASSEM.
11.	8P-3326	[1]	GLASS
12.	8P-4069	[1]	GLASS
13.	9P-0435	[2]	HANDLE
14.	9P-0436	[2]	LEVER ASSEM.
15.	4H-3521	[2]	SPRING
16.	6V-1155	[2]	STRIKER ASSEM.
17.	0S-1616	[4]	BOLT
18.	4B-4276	[6]	WASHER
19.	9P-1145	[2]	PLATE
	9P-1200	[6]	SHIM 1.9 mm(.074 in.)
20.	8P-3327	[2]	PLATE
21.	5P-5939 D		SEAL 2.6 m(102.36 in.)
22.	7B-2742	[8]	BOLT
	2D-6235	[8]	NUT
23.	6V-1157	[1]	LATCH (R.H.)
	6V-1156	[1]	LATCH (L.H.)
24.	5P-5582 C	[4]	SCREW
	3F-1147	[4]	LOCKWASHER
25.	9P-6894	[2]	LEVER
	9P-6895	[4]	PIN
	3B-4606	[4]	COTTER PIN
26.	3B-4504	[10]	LOCKWASHER
27.	9N-0869	[4]	WASHER
28.	5P-5638 CD		SEAL 1.23 m(48.42 in.)
29.	6V-1152 C	[2]	PLATE ASSEM.
30.	5P-6733 C	[4]	SCREW
	6V-0888 CF	[1]	FILM (Instruction)
			(Film to be placed next to exterior door handies)
	C		INDICATES CHANGE
	D		ORDER BY THE METER
	F		NOT SHOWN

#SEBP11530399

8P-2126: ROLL-OVER PROTECTIVE STRUCTURE GROUP

ROLL-OVER PROTECTIVE STRUCTURE GROUP

8P2126 ROLL-OVER PROTECTIVE STRUCTURE GROUP-L.H. Side View-
Part 2 of 3-Type 4
Serial No. 22X1 to 22X427 inclusive and 23X1 to 23X729 inclusive
Part of 8P2125 ROPS Arrangement listed on Page 167. AN ATTACHMENT

c178976 SEBP1153

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8P-9736 C	[1]	DOOR ASSEM. (R.H.)
	8P-9779 C	[1]	DOOR ASSEM. (L.H.)
	8P-9588	[4]	SHIM (use as required)
2.	4D-6082	[2]	BOLT
	4B-4280	[2]	WASHER
3.	3B-4610	[4]	COTTER PIN
4.	0L-1351	[4]	BOLT
	4B-4278	[4]	WASHER
5.	8P-9591	[1]	ARM ASSEM. (L.H.)
	8P-9594	[1]	ARM ASSEM. (R.H.)
6.	8P-4069	[1]	GLASS
7.	5P-5768 D		SEAL (use as required)
8.	9M-5884	[8]	BUMPER
9.	016-7150	[3]	SCREW
10.	9P-5389	[1]	ANGLE
11.	5P-5640 D		SEAL 2.9 m(114.11 in.)
12.	1B-2713	[18]	BOLT
	7H-8909	[16]	NUT
	4B-4276	[18]	WASHER 1.66mm(.065 in.)thick
	8M-2337	[16]	WASHER 3.05 mm(.120 in.)thick
13.	8P-3326	[1]	GLASS
14.	9P-1222	[1]	DOOR ASSEM.
15.	8P-3325	[1]	GLASS
16.	5P-5939 D		SEAL 1.25 m (49.22 in.)
17.	7D-6921	[8]	SCREW
	8F-8052	[8]	LOCKWASHER
18.	9P-7845	[8]	SHIM 1.6 mm (.063 in.) thick
	9P-7846	[8]	SHIM .8 mm (.031 in.) thick
19.	9P-1811	[1]	COVER
	9P-1810	[1]	GASKET
20.	0S-0509	[2]	BOLT
21.	9P-7844	[4]	PLATE
22.	3B-4506	[6]	LOCKWASHER
	C		INDICATES CHANGE
	D		ORDER BY THE METER