AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N3538 CONNECTING ROD AND PISTON GROUP--8 Required Part of 9N5190 Short Block Group listed on Page 8A 225


BASIC ENGINE
PISTON & ROD GP
CYLINDER HEAD GP
VALVE MECHANISM GP
PULLEY GP
HOUSING GP-FRONT
GEAR GP
MOUNTING GP-ENGINE

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02034-02831 (MACHINE) POWERED BY 3208 ENGINE SEBP1159 225 51U   (1972)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON & ROD GP
9N-3538 PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
 

#SEBP11590020
 

9N-3538: PISTON & ROD GP

9N3538 CONNECTING ROD AND PISTON GROUP--8 Required
Part of 9N5190 Short Block Group listed on Page 8A
c178115 SEBP1159
9N3538 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN  
2. 8N-7294 C [2] RETAINER  
3. 9N-3504 [1] ROD ASSEM.  
    (Includes)
  9N-5082 C [1] BEARING  
4. 9N-3832 C [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-5790 C [1] BEARING (standard)  
  9N-5920 CH [1] BEARING  
    .25 mm(.010 in.) undersize
  9N-5921 CH [1] BEARING  
    .51 mm(.020 in.) undersize
  9N-5922 CH [1] BEARING  
    1.27 mm(.050 in.) undersize
6. 9N-5409 CJ [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard - compression)  
8. 9L-9316 [1] RING (standard - oil)  
9. 9N-5408 CH [1] PISTON GROUP .508mm(.02in.)O.S.  
    (Includes)
10. 9L-9673 [1] RING (oversize - oil)  
11. 9N-0581 [1] RING (oversize-compression)  
12. 9N-5410 CH [1] PISTON GROUP 1.016mm(.04in.)O.S.  
    (Includes)
13. 9L-9323 [1] RING (oversize - oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  H   NOT PART OF 9N3538 CONNECTING
  J   9N875-RING GROUP-1 (Includes a
  C   INDICATES CHANGE
 

#SEBP11590021
 

9N-6435: PISTON & ROD GP

9N6435 CONNECTING ROD AND PISTON GROUP--Offset Pin--8 Required
Part of 9N5190 Short Block Group listed on Page 8A
c178112 SEBP1159
9N6435 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN-PISTON  
2. 8N-8064 [2] RETAINER-PIN  
3. 9N-3504 [1] ROD AS-CONNECTING  
  9N-5082 C [1] BEARING-CONNECTING ROD  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
  9L-7669 [2] NUT-CONNECTING ROD  
5. 9N-5790 L [1] BEARING-CONNECTING ROD  
  6N-9837 A [1] BEARING-CONNECTING ROD .254MM(.01IN)UNDERSIZE  
  6N-9838 A [1] BEARING-CONNECTING ROD .508MM(.02IN)UNDERSIZE  
  7N-4352 A [1] BEARING-CONNECTING ROD 1.27MM(.05IN)UNDERSIZE  
6. 9N-6431 J [1] PISTON GP (STANDARD)  
  9N-6337 [1] BODY AS-PISTON  
7. 9L-6233 L [1] RING-PISTON-TOP  
8. 9L-9316 L [1] RING-PISTON (OIL)  
9. 1W-2071 AN [1] PISTON GP .508MM(.02IN)  
10. 9L-9673 N [1] RING-PISTON (OIL)  
11. 9N-0581 N [1] RING-PISTON-TOP  
12. 1W-2073 AN [1] PISTON GP 1.016MM(.04IN)  
13. 9L-9323 N [1] RING-PISTON (OIL)  
14. 9N-0578 N [1] RING-PISTON-TOP  
   
  9N-0875 [1] RING GP-PISTON (FOR PART MARKED J-  
    INCL COMPLETE SET OF
    RINGS FOR ONE PISTON)
    L-STANDARD
    N-OVERSIZE
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11590022
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP
Engine Serial No. 79V3594 to 79V4136 inclusive
c215680 SEBP1159
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 [2] GASKET  
5. 5M-6213 C [3] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9N-3111 C [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9N-2837 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 5M-6214 [1] PLUG  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 2B-0947 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 2B-2006 C [12] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 6F-5282 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
21. 9N-3387 C [16] SPRING  
22. 7H-3171 C [1] PLUG  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROUP
 

#SEBP11590023
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP*R
Engine Serial No. 79V4137--Up
c227148 SEBP1159
9N1105 CYLINDER HEAD GP Parts scheme 9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3171 [1] PLUG-PIPE  
2. 5M-6213 [3] PLUG-PIPE  
3. 0L-1329 [8] BOLT (1/2-13X3 IN)(LOCATION E)  
4. 3H-7654 [36] WASHER-HARD (13.5X22.5X3MM THK)  
5. 5B-9603 [6] BOLT (3/8-16X5 IN)(LOCATION D)  
6. 6F-5282 [8] BOLT (1/2-13X5.25 IN)(LOCATION A)  
7. 2B-2006 [12] BOLT (1/2-13X4.75 IN)(LOCATION F)  
8. 2B-0947 [8] BOLT (1/2-13X2.25 IN)(LOCATION G)  
9. 9N-3111 [2] CYLINDER HEAD AS  
    (EACH INCLUDES)
  9L-7657 [1] PLUG-CUP  
10. 9N-2837 [4] INSERT-SEAT (EXHAUST)  
11. 0L-1329 [3] BOLT (1/2-13X3 IN)(LOCATION H)  
12. 8M-5860 [4] PLUG-CUP  
13. 5M-6214 [1] PLUG-PIPE  
14. 5M-6213 [1] PLUG-PIPE  
15. 0S-1571 [1] BOLT (3/8-16X1.75 IN)(LOCATION C-LEFT HEAD)  
  9L-9166 [1] STUDBOLT (3/8-16X3.63 IN)(LEFT HEAD)  
16. 9L-8889 [16] WASHER  
17. 9N-3387 [16] SPRING-VALVE OUTER  
18. 9L-9425 [16] RETAINER-SPRING  
19. 2A-4429 [32] LOCK-RETAINER  
20. 9L-9164 [2] GASKET-CYLINDER HEAD  
21. 9L-7683 [8] VALVE-EXHAUST  
22. 9L-7682 [8] VALVE-INLET  
  2N-8943 A [8] INSERT-VALVE SEAT (INLET)  
23. 9N-0906 [16] SPACER  
 

#SEBP11590024
 

9N-0487: VALVE MECHANISM GP

9N487 VALVE MECHANISM GROUP
c230518 SEBP1159
9N0487 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5786 C [16] LIFTER  
2. 9L-8623 [16] ROD ASSEM.  
3. 1D-4540 [8] BOLT  
4. 5S-5917 C [16] SCREW  
5. 9L-7712 [16] NUT  
6. 9L-6386 [16] ARM ASSEM.  
7. 9L-9398 [16] WASHER  
8. 2B-2694 [4] BOLT  
9. 9M-1974 [12] WASHER  
10. 9L-8076 [4] WASHER  
11. 9L-8094 [2] BRACKET  
12. 9L-9315 [2] SHAFT ASSEM.  
  C   INDICATES CHANGE
 

#SEBP11590025
 

9N-0730: COVER GP-VALVE MECHANISM

9N730 VALVE MECHANISM COVER GROUP
c227241 SEBP1159
9N0730 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8439 [1] CAP-OIL FILLER  
2. 9L-7430 [1] COVER-ROCKER ARM  
3. 9L-8925 [16] BOLT  
4. 9L-7490 [2] GASKET-COVER  
5. 9L-7429 [1] COVER-ROCKER ARM  
 

#SEBP11590026
 

9N-0543: PULLEY GP-AUXILIARY DRIVE

9N543 AUXILIARY DRIVE PULLEY GROUP
c220501 SEBP1159
9N0543 PULLEY GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1368 [1] BOLT  
2. 9N-2655 C [1] WASHER  
3. 6N-7056 C [1] PULLEY ASSEM.  
    (Includes)
4. 9L-5968 [1] SHIELD  
5. 9N-0306 [1] POINTER  
  C   INDICATES CHANGE
 

#SEBP11590027
 

9N-0560: COVER GP-FRONT HOUSING

9N560 FRONT HOUSING COVER GROUP
c205638 SEBP1159
9N0560 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-1827 C [1] COVER  
2. 4F-8965 [4] BOLT  
  4S-9191 [4] WASHER  
3. 9N-1828 C [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11590028
 

9N-1080: HOUSING GP-FRONT

9N1080 FRONT HOUSING GROUP
c227245 SEBP1159
9N1080 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2890 [1] HOUSING ASSEM.  
    (Includes)
2. 7M-7410 C [1] PLUG  
3. 2B-0858 C [3] PLUG  
4. 3H-5552 [1] PLUG  
5. 5M-6214 [2] PLUG  
6. 9N-2856 [1] BEARING  
7. 9N-0243 [1] SHAFT  
8. 1A-7462 [2] STUD  
9. 3J-5390 C [2] PLUG  
10. 3B-0551 [1] PLUG  
11. 1B-5174 [3] PLUG  
12. 4B-3903 H [6] BOLT 10.16 cm (4 in.) long  
13. 1D-4541 [7] BOLT 7.6 cm (3 in.) long  
14. 4B-3388 [2] BOLT 2.85 cm (1.125 in.) long  
15. 9N-0258 [1] GASKET  
16. 9L-9412 [1] FITTING  
  9L-9389 [1] CAP  
17. 1D-4716 [3] NUT  
18. 4B-4277 [2] WASHER  
19. 9L-7842 [1] ADAPTER  
20. 5P-0547 [1] SEAL  
21. 8M-5661 [1] SEAL  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#SEBP11590029
 

9N-0122: SUPPORT GP-ENGINE

9N122 ENGINE SUPPORT GROUP--Front
c227246 SEBP1159
9N0122 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0V-0375 [4] BOLT  
  3H-7654 C [4] WASHER  
2. 9N-0121 [1] SUPPORT  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod
4.5" BORE, V8 VEHICLE ENGINE (DIRECT INJECTION)
Piston
4.5" BORE, V8 VEHICLE ENGINE (DIRECT INJECTION)
Connecting Rod
3208 VEHICULAR ENGINE
Pistons And Rings
3208 VEHICULAR ENGINE
Bearings For Connecting Rods And Mains
3208 VEHICULAR ENGINE
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
225 EXCAVATOR ENGINE
Pistons
225 EXCAVATOR ENGINE
Service Magazine
1980 Caterpillar Remanufactured Products Catalog Is Now Available{0374}
1980/06/23
Top Rings For Pistons Have Two Designs{1215,1214}
1981/07/13
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Carbon Cutting On Piston Top Land {1213,1214}
1982/05/31
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Design Decreases Oil Consumption{1214,1215}
1982/12/20
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09
Reuse Of Engine Bearings{1230}
1983/05/16
New Piston Oil Rings{1215}
1983/09/05
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Parts Service Information For Pistons{1214,1225}
1984/01/09
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring{1213,1215}
1977/12/12
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods{0622,1214,1218}
1979/01/15
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218,1219}
1979/03/05
Connecting Rods For Remanufactured 1160 Truck Engines Changed For Use In Remanufactured 3208 Engines{1218}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Pistons Used With Two Keystone Compression Rings{1156,1205,1214,1215}
1989/06/19
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Parts Service Information For Pistons{1214,1225,1331}
1990/05/14
Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 225 :

ENGINE LIFTING GROUP
6N-0809 ENGINE LIFTING GROUP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
CRANKSHAFT GP
9N-6222 CRANKSHAFT GP
CRANKSHAFT GP
9N-6222 CRANKSHAFT GP
CRANKSHAFT GP
9N-2017 CRANKSHAFT GP
CRANKSHAFT GP
9N-2133 CRANKSHAFT GP
9N-3763 SERVICE GP-CYLINDER BLOCK
9N-1255 CYLINDER BLOCK GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
VALVE MECHANISM GP
9N-0487 VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
9N-0730 COVER GP-VALVE MECHANISM
PULLEY GP-AUXILIARY DRIVE
9N-0543 PULLEY GP-AUXILIARY DRIVE
COVER GP-FRONT HOUSING
9N-0560 COVER GP-FRONT HOUSING
HOUSING GP-FRONT
9N-1080 HOUSING GP-FRONT

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.