AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3V4540 BOOM LIGHTING GROUP FOR USE WITH TWO-PIECE BOOM 1M1882 Lamp parts are shown on Page 78. AN ATTACHMENT 225


ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
CONTROL GP-ELECTRONIC
ALARM GP
HARNESS GP
POWER TRAIN
BRAKE GP
HYDRAULIC SYSTEM
DRIVE GP

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02034-02831 (MACHINE) POWERED BY 3208 ENGINE SEBP1159 225 51U   (1972)

ELECTRICAL AND STARTING SYSTEM

LIGHTING GP
LIGHTING GP-FLOOD LAMP
3V-4500 LIGHTING GP-FLOOD LAMP
LIGHTING GP-BOOM
3V-1994 LIGHTING GP-BOOM
LIGHTING GP
3V-4540 LIGHTING GP
LAMP GP
1M-1882 LAMP GP
 

#SEBP11590150
 

3V-4540: LIGHTING GP

3V4540 BOOM LIGHTING GROUP
FOR USE WITH TWO-PIECE BOOM
1M1882 Lamp parts are shown on Page 78. AN ATTACHMENT
c220338 SEBP1159
3V4540 LIGHTING GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8948 [1] FUSE (15 AMP)  
2. 8K-3996 [1] WIRE AS  
  5P-5629 D WIRE 5.27M(207.48IN)  
3. 5P-0721 E HOSE 486.4CM(160.31IN)  
4. 2L-8075 [1] TERMINAL  
5. 6K-0806 [3] STRAP-CABLE  
6. 8K-3997 [1] WIRE AS  
  5P-5629 D WIRE 2.71M(107IN)  
7. 2L-8075 [2] TERMINAL  
8. 5P-0721 E HOSE 241.3CM(95IN)  
9. 1M-1882 Y [2] LAMP GP  
10. 0L-1351 [17] BOLT  
  3B-4506 [17] LOCKWASHER  
11. 5D-3183 [2] NUT-FULL  
  5D-3184 [2] LOCKWASHER  
  2B-8352 [2] WASHER  
12. 3S-8664 [14] CLIP  
13. 3V-9460 C [2] BRACKET AS  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP11590151
 

1M-1882: LAMP GP

1M1882 FLOOD LAMP ASSEMBLY
Part of 3V4500, 3V1994 and 3V4540 Lighting Groups shown on Pages 75, 76 and 77
c119409 SEBP1159
1M1882 LAMP GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-5898 [1] LAMP-SEALED UNIT  
2. 2P-2541 [1] BODY AS  
3. 2M-5282 [1] RING-MOUNTING  
4. 2M-5284 [2] MOLDING AS  
  5M-6668 [2] SCREW-MACHINE  
 

#SEBP11590152
 

3V-1962: CONTROL GP-ELECTRIC

3V1962 ELECTRIC HAND CONTROL GROUP
Part of 3V4681 Clamshell Rotator Arrangement and 4V5506 Rotator Control
Arrangement listed on Pages 235 and 235A. AN ATTACHMENT
c182496 SEBP1159
3V1962 CONTROL GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3970 [2] SWITCH GROUP  
    (Each Includes)
2. 2G-3903 [1] SWITCH  
3. 3V-1965 [2] ADAPTER  
4. 3V-1963 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 CH WIRE 1.4 m(55.12 in.)  
  5P-6006 CH TUBE .22 m(8.7 in.)  
5. 3V-1964 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 CH WIRE 1.4 m(55.12 in.)  
  5P-6006 CH TUBE .22 m(8.7 in.)  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
 

#SEBP11590153
 

3V-5348: ALARM GP-TRAVEL

3V5348 TRAVEL ALARM GROUP
Serial No. 51U2255--Up
3V9024 Harness parts are shown on Page 78B
c215495 SEBP1159
3V5348 ALARM GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-6511 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 H WIRE .1 m(3.94 in.)  
  8M-0537 [1] TERMINAL  
2. 9N-9587 [1] CONNECTOR  
3. 3V-9022 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 H WIRE 2.60 m(102.36 in.)  
4. 5P-5610 [1] CONNECTOR  
5. 9N-9587 [1] CONNECTOR  
6. 9D-7032 [1] SWITCH (oil pressure)  
7. 9P-1813 [1] TIMER ASSEM.  
8. 3V-5368 [1] PLUG  
9. 3F-1006 [1] SWITCH (push)  
10. 3V-9023 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 H WIRE 1.76 m(69.28 in.)  
11. 2A-0762 [2] BOLT  
  3B-4504 [2] LOCKWASHER  
  4B-4276 [2] WASHER  
12. 3V-9024 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
13. 0S-1608 [2] BOLT  
  5P-1075 [2] WASHER  
14. 6P-8576 [1] ALARM (back-up)  
    (Includes)
  5P-5610 [2] CONNECTOR  
  H   ORDER BY THE METRE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11590154
 

3V-9024: HARNESS AS-WIRING

3V9024 WIRING HARNESS ASSEMBLY
Serial No. 51U2255--Up
Part of 3V5348 Travel Alarm Group shown on Page 78A
c215496 SEBP1159
3V9024 HARNESS AS-WIRING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-8065 [1] TERMINAL  
2. 2L-8075 [1] TERMINAL  
3. 6N-9587 [1] CONNECTOR (FEMALE)  
4. 2L-8079 [1] TERMINAL  
5. 2L-8077 [1] TERMINAL  
6. 5P-3175 [1] CONNECTOR AS  
   
    THE FOLLOWING WIRE
    IS AVAILABLE:
  5P-5623 BD WIRE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP11590155
 

8K-0177: PARKING BRAKE GROUP

8K177 PARKING BRAKE GROUP--2 Required
Serial No. 51U2034 to 2727, 2729 to 2733 and 51U2735--Up
c207604 SEBP1159
8K0177 PARKING BRAKE GROUP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-8758 [1] SEAL  
2. 8K-0522 [1] BLOCK  
3. 8K-0524 [1] LOCK  
4. 2D-1691 C [1] SEAL  
5. 8K-0507 [2] DISC  
6. 8K-0509 [3] PLATE  
7. 2V-1235 C [1] ADAPTER  
8. 4F-7388 [1] SEAL  
9. 2B-0947 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
10. 8K-0508 [2] SPRING  
11. 8K-0510 [2] RETAINER  
12. 5J-8400 [1] SEAL  
13. 5J-5150 [1] SEAL  
14. 5J-1731 [1] SEAL  
15. 8K-0523 [1] PISTON  
16. 4F-7387 [1] SEAL  
17. 8K-0558 [1] NUT  
  8K-0557 [1] SETSCREW  
    -OR-
  8K-4352 C [1] NUT  
18. 2V-0462 C [1] PLATE  
19. 0S-1566 [2] BOLT  
20. 0L-2119 [2] WASHER  
21. 1J-6473 [1] RING  
22. 5F-3999 [1] SEAL  
23. 8K-0521 [1] HOUSING  
24. 8K-3584 [1] VALVE  
  C   INDICATES CHANGE
 

#SEBP11590156
 

3V-9163: BRAKE GP-PARKING

3V9163 PARKING BRAKE GROUP--2 Required
Serial No. 51U2728 and 51U2734 only
c220235 SEBP1159
3V9163 BRAKE GP-PARKING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-8758 [1] SEAL  
2. 8K-0522 [1] BLOCK  
3. 8K-0524 [1] LOCK  
4. 2D-1691 [1] SEAL  
5. 8K-0507 [2] DISC  
6. 8K-0509 [3] PLATE  
7. 3V-8904 [1] ADAPTER  
8. 4F-7388 [1] SEAL  
9. 2B-0947 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
10. 8K-0508 [2] SPRING  
11. 8K-0510 [2] RETAINER  
12. 5J-8400 [1] SEAL  
13. 5J-5150 [1] SEAL  
14. 5J-1731 [1] SEAL  
15. 8K-0523 [1] PISTON  
16. 4F-7387 [1] SEAL  
17. 8K-4352 [1] NUT  
18. 2V-0462 [1] PLATE  
19. 0S-1566 [2] BOLT  
20. 0L-2119 [2] WASHER  
21. 1J-6473 [2] RING  
22. 5F-3999 [1] SEAL  
23. 8K-0521 [1] HOUSING  
24. 8K-3584 [1] VALVE  
 

#SEBP11590157
 

8K-0183: PUMP DRIVE GROUP

8K183 PUMP DRIVE GROUP
Serial No. 51U2034 to 51U2089 inclusive
c162578 SEBP1159
8K0183 PUMP DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-5262 [1] PLUG  
  2A-3398 C [1] GASKET  
2. 8K-2473 [2] GEAR ASSEM.  
3. 1A-2029 [18] BOLT  
  3B-4506 [18] LOCKWASHER  
4. 4J-5907 [8] BOLT  
5. 9K-3116 [4] BOLT  
  9H-1024 [4] WASHER  
6. 2V-0961 [1] DRIVER  
7. 5P-3118 C [1] SEAL  
8. 8K-2518 [1] JOINT ASSEM.  
9. 8K-2433 [1] ADAPTER  
10. 3V-1392 C [1] CASE ASSEM.  
11. 8K-2416 [2] TUBE ASSEM.  
12. 7M-8480 [2] DOWEL  
13. 7M-7260 LIQUID GASKET  
14. 8K-2779 [2] CAGE  
15. 5F-3106 [3] SEAL  
16. 030-7335 [6] BOLT  
  0L-2119 [6] WASHER  
17. 1P-2662 [5] CONE  
18. 1P-2636 [5] CUP  
19. 5H-3252 [2] SEAL  
20. 8K-2432 [2] SHIM PACK  
21. 8K-0711 [1] CAGE  
22. 2H-3935 [1] SEAL  
23. 8M-3837 [1] PLUG  
  2A-3398 C [1] GASKET  
24. 9S-3582 [1] CONE  
25. 9S-3581 [1] CUP  
26. 8K-0710 [1] SHIM PACK  
27. 2V-0962 [1] GEAR (79 teeth)  
28. 3V-1393 C [1] COVER  
  2B-7557 [2] CORK  
29. 2H-8829 [1] PLUG  
  7F-0560 [1] WASHER  
30. 1A-5822 C [22] BOLT 69.85 mm(2.75 in.) long  
  0L-1329 [5] BOLT 76.20 mm(3 in.) long  
  2M-0849 C [27] WASHER  
31. 0S-1591 [12] BOLT  
32. 5M-2894 [20] WASHER  
33. 9J-8757 [2] SEAL  
34. 8M-4446 [1] SEAL  
  C   INDICATES CHANGE
 

#SEBP11590158
 

8K-0183: PUMP DRIVE GROUP

8K183 PUMP DRIVE GROUP
Serial No. 51U2090 to 2727, 2729 to 2733 and 51U2735--Up and 61X1--Up
c214409 SEBP1159
8K0183 PUMP DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-5262 [1] PLUG  
  2A-3398 C [1] GASKET  
2. 8K-2473 [2] GEAR ASSEM.  
3. 1A-2029 C [16] BOLT 28.58 mm(1.125 in.)  
  3B-4506 C [16] LOCKWASHER  
4. 4J-5907 [8] BOLT  
5. 9K-3116 [4] BOLT  
  9H-1024 [4] WASHER  
6. 2V-0961 [1] DRIVER  
7. 5P-3118 C [1] SEAL  
8. 8K-2518 [1] JOINT ASSEM.  
9. 8K-2433 [1] ADAPTER  
10. 3V-1392 C [1] CASE ASSEM.  
11. 8K-2416 [2] TUBE ASSEM.  
12. 7M-8480 [2] DOWEL  
13. 7M-7260 LIQUID GASKET  
14. 8K-2779 [2] CAGE  
15. 5F-3106 [3] SEAL  
16. 030-7335 [6] BOLT  
  0L-2119 [6] WASHER  
17. 1P-2662 [5] CONE  
18. 1P-2636 [5] CUP  
19. 5H-3252 [2] SEAL  
20. 8K-2432 [2] SHIM PACK  
21. 8K-0711 [1] CAGE  
22. 2H-3935 [1] SEAL  
23. 8M-3837 [1] PLUG  
  2A-3398 C [1] GASKET  
24. 9S-3582 [1] CONE  
25. 9S-3581 [1] CUP  
26. 8K-0710 [1] SHIM PACK  
27. 2V-0962 [1] GEAR (79 teeth)  
28. 3V-1393 C [1] COVER  
  2B-7557 [2] CORK  
29. 2H-8829 [1] PLUG  
  7F-0560 [1] WASHER  
30. 1A-5822 C [22] BOLT 69.85 mm(2.75 in.) long  
  0L-1329 [5] BOLT 76.20 mm(3 in.) long  
  2M-0849 C [27] WASHER  
31. 0S-1591 C [14] BOLT 38.10 mm(1.50 in.)  
32. 5M-2894 C [24] WASHER  
33. 9J-8757 [2] SEAL  
34. 8M-4446 [1] SEAL  
  C   INDICATES CHANGE
 

#SEBP11590159
 

3V-8901: DRIVE GP-PUMP

3V8901 PUMP DRIVE GROUP
Serial No. 51U2728 and 51U2734 only
c227889 SEBP1159
3V8901 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-5262 [1] PLUG  
2. 8K-2473 [2] GEAR ASSEM.  
3. 1A-2029 [16] BOLT 28.58 mm(1.125 in.)  
  3B-4506 [16] LOCKWASHER  
4. 4J-5907 [8] BOLT  
5. 9K-3116 [4] BOLT  
  9H-1024 [4] WASHER  
6. 2V-0961 [1] DRIVER  
7. 5P-3118 [1] SEAL  
8. 8K-2518 [1] JOINT ASSEM.  
9. 8K-2433 [1] ADAPTER  
10. 3V-1392 [1] CASE ASSEM.  
11. 8K-2416 [2] TUBE ASSEM.  
12. 7M-8480 [2] DOWEL  
13. 7M-7260 LIQUID GASKET  
14. 8K-2779 [2] CAGE  
15. 5F-3106 [2] SEAL  
16. 030-7335 C [4] BOLT  
  0L-2119 C [4] WASHER  
17. 1P-2662 [5] CONE  
18. 1P-2636 [5] CUP  
19. 5H-3252 [2] SEAL  
20. 8K-2432 [2] SHIM PACK  
21. 6A-5705 [1] CAGE  
22. 2H-3935 [1] SEAL  
23. 8M-3837 [1] PLUG  
24. 9S-3582 [1] CONE  
25. 9S-3581 [1] CUP  
26. 5C-4287 [1] SHIM PACK  
27. 2V-0962 [1] GEAR (79 teeth)  
28. 3V-1393 [1] COVER  
  2B-7557 [2] CORK  
29. 2H-8829 [1] PLUG  
  7F-0560 [1] WASHER  
30. 1A-5822 [22] BOLT 69.85 mm(2.75 in.)long  
  0L-1329 [5] BOLT 76.20 mm(3 in.)long  
  2M-0849 [27] WASHER  
31. 0S-1591 [14] BOLT 38.10 mm(1.50 in.)  
32. 5M-2894 [24] WASHER  
33. 1U-1655 C [2] SEAL  
34. 8M-4446 [1] SEAL  
35. 7J-8114 [1] GASKET  
36. 2A-3398 [2] GASKET  
37. 030-7335 C [2] BOLT 38.10 mm(1.50 in.)long  
  0L-2119 C [2] WASHER  
    - OR -
  6H-1717 C [2] BOLT 28.58 mm(1.125 in.)long  
  5P-8245 C [2] WASHER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Of 3V4500 Lighting Group{7309}
Installation Of 3V4500 Lighting Group{7309}
Installation Of 3V1994 Lighting Group{7309}
Installation Of 3V1994 Lighting Group{7309}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Service Magazine
Caterpillar Electric Starting Motors{1453,1407}
1982/03/22
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}

Caterpillar Parts SIS Catalog 225 :

LIGHTING GP-BOOM
3V-1994 LIGHTING GP-BOOM
LIGHTING GP-FLOOD LAMP
3V-4500 LIGHTING GP-FLOOD LAMP
SWITCH AS-DISCONNECT
7N-0718 SWITCH AS-DISCONNECT
HARNESS AS-WIRING
3V-4537 HARNESS AS-WIRING
HARNESS AS
3V-4539 HARNESS AS
HARNESS AS-WIRING
3V-1891 HARNESS AS-WIRING
HARNESS AS-WIRING
3V-1927 HARNESS AS-WIRING
WIRING DIAGRAM--24 VOLT SYSTEM
WIRING DIAGRAM--24 VOLT SYSTEM
LAMP GP
1M-1882 LAMP GP
CONTROL GP-ELECTRIC
3V-1962 CONTROL GP-ELECTRIC
ALARM GP-TRAVEL
3V-5348 ALARM GP-TRAVEL
HARNESS AS-WIRING
3V-9024 HARNESS AS-WIRING
PARKING BRAKE GROUP
8K-0177 PARKING BRAKE GROUP
BRAKE GP-PARKING
3V-9163 BRAKE GP-PARKING
PUMP DRIVE GROUP
8K-0183 PUMP DRIVE GROUP
PUMP DRIVE GROUP
8K-0183 PUMP DRIVE GROUP

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.