6N277 GOVERNOR AND FUEL INJECTION PUMP GROUP-Replaced by 4N6116 listed on Page 45 Engine Serial No. 78P34523 to 78P37521 inclusive. 6N243 Governor and Fuel Injection Pump and 6N2505 Torque Control parts are shown on Page 46 and 56 D4E



FUEL SYSTEM
GOVERNOR GP

TRACK-TYPE TRACTOR D4E TRACK-TYPE TRACTOR 27X
 D4E TRACTOR / DIRECT DRIVE / 27X00001-00917 (MACHINE) POWERED BY 3304 ENGINE SEBP1169 D4E 27X   (1977)

FUEL SYSTEM

GOVERNOR GP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
GOV & FUEL INJ PUMP GP
6N-0277 GOV & FUEL INJ PUMP GP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
GOV & FUEL INJ PUMP GP
7N-8293 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
7N-8293 GOV & FUEL INJ PUMP GP
 

#SEBP11690100
 

6N-0277: GOV & FUEL INJ PUMP GP

6N277 GOVERNOR AND FUEL INJECTION PUMP GROUP-Replaced by 4N6116
listed on Page 45
Engine Serial No. 78P34523 to 78P37521 inclusive. 6N243 Governor and Fuel
Injection Pump and 6N2505 Torque Control parts are shown on Page 46 and 56
c152518 SEBP1169
6N0277 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6N-2505 CY [1] TORQUE CONTROL  
    (Separate Illustration)
2. 6N-0243 CY [1] GOVERNOR AND FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  C   INDICATES
  Y   SEPARATE ILLUSTRATION
 

#SEBP11690101
 

4N-4510: COVER GP-GOVERNOR

4N4510 GOVERNOR COVER GROUP
Engine Serial No. 78P55544-Up
c229520 SEBP1169
4N4510 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8N-8082 C [1] COVER  
2. 0S-1615 [2] BOLT  
  5P-0537 C [2] WASHER  
3. 4M-8303 C [1] SEAL-O-RING  
4. 2S-7905 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11690102
 

7N-8293: GOV & FUEL INJ PUMP GP

7N8293 GOVERNOR AND FUEL INJECTION PUMP GROUP-Replaced by 4N6116
listed on Page 45
Engine Serial No. 78P37522 to 78P53872 inclusive. 6N243 Governor and 6N581 Torque
Control parts are shown on Pages 46 and 56A
c168084 SEBP1169
7N8293 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6N-0581 Y [1] TORQUE CONTROL  
    (Separate Illustration)
2. 6N-0243 Y [1] GOVERNOR AND FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP11690103
 

7N-8293: GOV & FUEL INJ PUMP GP

7N8293 GOVERNOR AND FUEL INJECTION PUMP GROUP-Replaced by 4N6116
listed on Page 45
Engine Serial No. 78P53873-Up. 6N243 Governor and 6N581 Torque Control parts
are shown on Pages 46 and 56A
c176642 SEBP1169
7N8293 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6N-0581 CY [1] TORQUE CONTROL  
    (Separate Illustration)
2. 6N-0243 CY [1] GOVERNOR AND FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11690104
 

4N-6116: GOV & FUEL INJ PUMP GP

4N6116 GOVERNOR AND FUEL INJECTION PUMP GROUP-Field Installation
SEBP11690104 SEBP1169
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  4N-6115 Y [1] GOVERNOR AND FUEL INJECTION PUMP GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP11690105
 

6N-0243: GOV & FUEL INJ PUMP GP

6N243 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N277 and 7N8293 Governor and Fuel Injection Pump Groups shown on Pages 44 and 44A
4N1834 Governor and Fuel Injection Pump parts are shown on Pages 48 through 51H
c219221 SEBP1169
6N0243 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT 25.40 mm(1 in.) long  
  8S-4710 [2] BOLT 101.60 mm(4 in.) long  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
5. 4N-8179 [1] PIN  
6. 4N-1834 Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 4N-0444 [2] SPACER  
8. 7N-2057 C [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 7N-0450 C [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11690106
 

4N-6115: GOV & FUEL INJ PUMP GP

4N6115 GOVERNOR AND FUEL INJECTION PUMP GROUP-Type 1
Part of 4N6116 Governor and Fuel Injection Pump Group listed on Page 45
6N5356 Pump and 6N509 Control parts are shown on Pages 52 through 55 and 56
c213935 SEBP1169
4N6115 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT -2.54 cm(1 in.) long  
3. 8S-4710 [2] BOLT -10.16 cm(4 in.) long  
4. 4N-0159 [1] GASKET  
5. 4N-4320 [1] SHAFT ASSEM.  
6. 6N-5356 Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 4N-0444 [2] SPACER  
8. 4N-9338 [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 7N-0450 C [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
13. 4N-8179 [1] PIN  
14. 6N-0509 Y [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
15. 4N-0443 [1] PIN  
16. 4N-4225 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11690107
 

4N-6115: GOV & FUEL INJ PUMP GP

4N6115 GOVERNOR AND FUEL INJECTION PUMP GROUP-Type 2
Part of 4N6116 Governor and Fuel Injection Pump Group listed on Page 45
6N581 Control and 6N5356 Pump parts are shown on Pages 52 through 55 and 56A
c232383 SEBP1169
4N6115 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT- 2.54 cm(1 in.) long  
3. 8S-4710 [2] BOLT -10.16 cm(4 in.) long  
4. 4N-0159 [1] GASKET  
5. 4N-4320 [1] SHAFT ASSEM.  
6. 6N-5356 Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 4N-0444 [2] SPACER  
8. 7N-2057 C [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 7N-0450 [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
13. 4N-8179 [1] PIN  
14. 6N-0581 CY [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
15. 4N-0443 [1] PIN  
16. 4N-4225 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11690108
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP-Part 1 of 4-Type 1
Part of 6N243 Governor and Fuel Injection Pump Group shown on Page 46
c214674 SEBP1169
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 4N-2954 [1] SLEEVE  
2. 4N-3779 [1] KEY  
3. 4N-0429 [1] GEAR (15 teeth)  
4. 4N-0527 [1] SPRING  
5. 4N-0435 [1] SEAT  
6. 6N-7451 C [1] SEAT  
7. 4N-0927 [1] SHAFT ASSEM.  
8. 6N-2957 C [2] WASHER  
9. 6N-2956 C [1] WASHER  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 6N-6567 [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0507 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 4N-1131 [1] BODY ASSEM.  
    (Includes)
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-1723 [1] SHIELD  
29. 4N-0425 [3] WEIGHT  
30. 4N-1178 [1] HOUSING ASSEM.  
    (Includes)
31. 4N-2333 [1] DOWEL  
32. 8S-6814 [1] DOWEL  
33. 4N-5050 [1] PLUG  
34. 4N-0260 [2] SEAL  
35. 6N-2578 [1] BEARING  
36. 4N-2786 [1] SEAL  
37. 9S-4180 C [1] PLUG  
  4J-7533 C [1] SEAL  
  C   INDICATES CHANGE
 

#SEBP11690109
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP-Part 2 of 4-Type 1
Part of 6N243 Governor and Fuel Injection Pump Group shown on Page 46
c223901 SEBP1169
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 3B-8695 [1] BOLT- 88.9 mm(3.50 in.) long  
3. 2A-4781 [1] BOLT- 69.8 mm(2.75 in.) long  
4. 6N-1346 [1] HOUSING ASSEM.  
    (Includes)
5. 4N-2333 [1] PIN  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 6N-5325 [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 4N-5481 C [1] STUD  
10. 6N-1078 C [1] BEARING  
11. 8N-0628 C [1] BEARING  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 C [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [2] BOLT  
  6N-7523 C [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 9S-8632 [1] SPRING  
20. 4N-0116 [1] GUIDE  
21. 5J-5314 [4] BOLT  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Governor Control
D4E, D5B & D6D TRACTORS OPERATOR'S STATION
Fuel Injection Pump Housing And Governor
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Governor
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Fuel Transfer Pump
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Fuel Injection Pump Housing And Governor (Compact Fuel System)
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Fuel Injection Pump Housing (Compact Fuel System)
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Governor - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Governor - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Specifications And Rack Adjustment For Variable Horsepower Fuel Systems{1251,1257,1250}
1984/09/03
Specifications And Revised Rack Adjustment Procedures For Variable Horsepower Fuel Systems{1251,1257,1250}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog D4E :

COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
CONTROL GP-GOVERNOR
3V-3142 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
3V-3142 CONTROL GP-GOVERNOR
CONTROL GP-DECELERATOR
8P-2490 CONTROL GP-DECELERATOR
MUFFLER GP
6N-8754 MUFFLER GP
PIPE GP-EXHAUST
3P-0138 PIPE GP-EXHAUST
MANIFOLD GP-EXHAUST
2P-6570 MANIFOLD GP-EXHAUST
FASTENER GP-EXHAUST MANIFOLD
4N-9585 FASTENER GP-EXHAUST MANIFOLD
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
GOV & FUEL INJ PUMP GP
7N-8293 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
7N-8293 GOV & FUEL INJ PUMP GP
4N-6116 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0243 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6115 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6115 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP

Truck sale:

Caterpillar D4E, Construction
21,500 
Caterpillar D4E, Construction
- Dozers
BLANCHARD MACHINERY CO.
1986 CAT D4E
Call 
1986 CAT D4E

National Equipment, LLC
Madera, California
1981 CAT D4E
USD $10,984 
1981 CAT D4E

Conquest Equipment
Oxbow, Saskatchewan, Canada
1980 CAT D4E
USD $10,984 
1980 CAT D4E

Conquest Equipment
Oxbow, Saskatchewan, Canada
CAT D4E
USD $15,000 
CAT D4E

L & L Equipment Sales
La Vergne, Tennessee