AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9G567 WINCH CONVERSION GROUP-POWER SHIFT-DISCONNECT-LOW SPEED-PART 1 MUST BE USED WITH 8P1986 OR 8P2319 WINCH ARRANGEMENT LISTED ON PAGES 4B & 4G. AN ATTACHMENT 55


WORK TOOLS
WINCH GP
IMPLEMENTS
VALVE GP

WINCH 55 WINCH 35U
 55 AND 56 WINCH 35U00001-UP SEBP1172 55 35U   (1975)

WORK TOOLS

WINCH GP
WINCH CONVERSION ARRANGEMENTS
WINCH ARRANGEMENTS
CONVERSION GP-WINCH
9G-0567 CONVERSION GP-WINCH
9G-0567 CONVERSION GP-WINCH
CONVERSION GP-WINCH
9G-0568 CONVERSION GP-WINCH
9G-0568 CONVERSION GP-WINCH
 

#SEBP11720020
 

9G-0567: CONVERSION GP-WINCH

9G567 WINCH CONVERSION GROUP-POWER SHIFT-DISCONNECT-LOW SPEED-PART 1
MUST BE USED WITH 8P1986 OR 8P2319 WINCH ARRANGEMENT LISTED ON
PAGES 4B & 4G. AN ATTACHMENT
c174760 SEBP1172
9G0567 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-8488 [1] CAGE  
2. 3J-1907 [1] SEAL  
3. 9S-4191 [1] PLUG  
4. 8F-9206 [1] SEAL  
5. 3P-8645 [1] PIN  
6. 3P-8644 [2] PIN  
7. 7S-3036 [1] SEAL  
8. 3P-8404 [1] GEAR (25 teeth)  
9. 9P-9938 [2] DETENT  
10. 1S-8868 [1] RING  
11. 3P-8405 [1] COUPLER  
12. 3P-8643 [8] SPRING  
13. 3P-8638 [1] PLATE  
14. 8P-0492 [1] RING  
15. 3P-8518 [1] PISTON  
16. 3J-8500 [1] RING  
17. 5P-4621 [1] RACE AND ROLLER ASSEM.  
18. 5P-4656 [1] RACE  
19. 3P-8553 [1] SHAFT ASSEM.  
20. 2B-0858 [1] PLUG  
 

#SEBP11720021
 

9G-0567: CONVERSION GP-WINCH

9G0567 WINCH CONVERSION GROUP-POWER SHIFT-DISCONNECT-LOW SPEED-PART 2
MUST BE USED WITH 8P1986 OR 8P2319 WINCH ARRANGEMENT SHOWN ON PAGES 4B
AND 4G. 8P13 SELECTOR & PRESSURE VALVE PARTS ARE SHOWN ON PAGE 5B
AN ATTACHMENT
c175418 SEBP1172
9G0567 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-8638 [1] GEAR (80 teeth)  
2. 1P-8637 [1] GEAR (63 teeth)  
3. 5K-9243 [1] ELBOW  
4. 5K-9242 [1] UNION  
5. 3P-9200 [3] CLIP  
  0T-0102 [3] BOLT  
  4B-4278 [3] WASHER  
6. 8P-3283 [1] TUBE ASSEM.  
7. 8P-0018 [1] TUBE ASSEM.  
  6L-3616 [1] CONNECTOR  
8. 8P-0013 Y [1] VALVE GROUP  
    (Separate Illustration)
9. 2P-3554 [1] DRUM ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#SEBP11720022
 

9G-0568: CONVERSION GP-WINCH

9G0568 WINCH CONVERSION GROUP-DIRECT DRIVE-DISCONNECT-LOW SPEED-PART 1
MUST BE USED WITH 8P1988 OR 8P2321 WINCH ARRANGEMENT LISTED ON
PAGES 4C & 4G. AN ATTACHMENT
c174761 SEBP1172
9G0568 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-8488 [1] CAGE  
2. 3J-1907 [1] SEAL  
3. 9S-4191 [1] PLUG  
4. 8F-9206 [1] SEAL  
5. 3P-8645 [1] PIN  
6. 3P-8644 [2] PIN  
7. 7S-3036 [1] SEAL  
8. 3P-8404 [1] GEAR (25 teeth)  
9. 9P-9938 [2] DETENT  
10. 1S-8868 [1] RING  
11. 3P-8405 [1] COUPLER  
12. 3P-8643 [8] SPRING  
13. 3P-8638 [1] PLATE  
14. 8P-0492 [1] RING  
15. 3P-8518 [1] PISTON  
16. 3J-8500 [1] RING  
17. 5P-4621 [1] RACE AND ROLLER ASSEM.  
18. 5P-4656 [1] RACE  
19. 3P-8553 [1] SHAFT ASSEM.  
20. 2B-0858 [1] PLUG  
 

#SEBP11720023
 

9G-0568: CONVERSION GP-WINCH

9G0568 WINCH CONVERSION GROUP-DIRECT DRIVE-DISCONNECT-LOW SPEED-PART 2
MUST BE USED WITH 8P1988 OR 8P2321 WINCH ARRANGEMENT LISTED ON PAGES
4C & 4G. 8P13 SELECTOR & PRESSURE VALVE PARTS ARE SHOWN ON PAGE 5B
AN ATTACHMENT
c175420 SEBP1172
9G0568 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3554 [1] DRUM ASSEM.  
2. 8P-0013 Y [1] VALVE GROUP  
    (Separate Illustration)
3. 5K-9243 [1] ELBOW  
4. 5K-9242 [1] UNION  
5. 3P-9200 [3] CLIP  
  0T-0102 [3] BOLT  
  4B-4278 [3] WASHER  
6. 8P-3283 [1] TUBE ASSEM.  
7. 8P-0018 [1] TUBE ASSEM.  
  6L-3616 [1] CONNECTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP11720024
 

9G-0563: CONVERSION GP-WINCH

9G0563 WINCH CONV AR-LOW SPEED
TYPE 2- MUST BE USED WITH 8P1986 OR 8P2319 WINCH AR-PAGE 4B & 4G
c353021 SEBP1172
9G0563 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-8638 [1] GEAR (80 TEETH)  
2. 1P-8637 [1] GEAR (63 TEETH)  
3. 6T-0192 C [1] DRUM AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11720025
 

9G-0563: CONVERSION GP-WINCH

9G0563 WINCH CONVERSION GP-POWER SHIFT-LOW SPEED
TYPE 1- MUST BE USED WITH 8P1986 OR 8P2319 WINCH AR-PAGE 4B & 4G
c174757 SEBP1172
9G0563 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-8638 [1] GEAR (80 teeth)  
2. 1P-8637 [1] GEAR (63 teeth)  
3. 2P-3554 [1] DRUM ASSEM.  
 

#SEBP11720026
 

9G-0565: CONVERSION GP-WINCH

9G0565 WINCH CONVERSION GROUP-POWER SHIFT,DISCONNECT-STANDARD SPEED
MUST BE USED WITH 8P1986 OR 8P2319 WINCH ARRANGEMENT LISTED ON PAGES
4B & 4G. 8P13 SELECTOR & PRESSURE VALVE PARTS ARE SHOWN ON PAGE 5B
AN ATTACHMENT
c316764 SEBP1172
9G0565 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-8488 [1] CAGE  
2. 3J-1907 [1] SEAL  
3. 9S-4191 [1] PLUG  
4. 8F-9206 [1] SEAL  
5. 3P-8645 [1] PIN  
6. 3P-8644 [2] PIN  
7. 7S-3036 [1] SEAL  
8. 3T-4675 C [1] GEAR (25 TEETH)  
9. 9P-9938 [2] DETENT  
10. 1S-8868 [1] RING  
11. 3T-4676 C [1] COUPLER  
12. 3T-3389 C [8] SPRING  
13. 3P-8638 [1] PLATE  
14. 8P-0492 [1] RING  
15. 3P-8518 [1] PISTON  
16. 3J-8500 [1] RING  
17. 5P-4621 [1] RACE & ROLLER AS.  
18. 5P-4656 [1] RACE  
19. 3P-8553 [1] SHAFT AS.  
20. 2B-0858 [1] PLUG  
21. 5K-9243 [1] ELBOW  
22. 8P-3283 [1] TUBE AS.  
23. 5K-9242 [1] UNION  
24. 0T-0102 [3] BOLT  
  5M-2894 C [3] WASHER  
  3P-9200 [3] CLIP  
25. 8P-0018 [1] TUBE AS.  
  6L-3616 [1] CONNECTOR  
26. 8P-0013 Y [1] VALVE GROUP  
27. 5J-5314 C [1] BOLT  
28. 6T-9069 C [1] LOCKNUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11720027
 

9G-0566: CONVERSION GP-WINCH

9G0566 WINCH CONVERSION GROUP-DIRECT DRIVE-DISCONNECT-STANDARD SPEED
MUST BE USED WITH 8P1988 OR 8P2321 WINCH ARRANGEMENT LISTED ON PAGES 4C
AND 4G. 8P13 SELECTOR & PRESSURE VALVE PARTS ARE SHOWN ON PAGE 5B
AN ATTACHMENT
c316771 SEBP1172
9G0566 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-8488 [1] CAGE  
2. 3J-1907 [1] SEAL  
3. 9S-4191 [1] PLUG  
4. 8F-9206 [1] SEAL  
5. 3P-8645 [1] PIN  
6. 3P-8644 [2] PIN  
7. 7S-3036 [1] SEAL  
8. 3T-4675 C [1] GEAR (25 TEETH)  
9. 9P-9938 [2] DETENT  
10. 1S-8868 [1] RING  
11. 3T-4676 C [1] COUPLER  
12. 3T-3389 C [8] SPRING  
13. 3P-8638 [1] PLATE  
14. 8P-0492 [1] RING  
15. 3P-8518 [1] PISTON  
16. 3J-8500 [1] RING  
17. 5P-4621 [1] RACE & ROLLER AS.  
18. 5P-4656 [1] RACE  
19. 3P-8553 [1] SHAFT AS.  
20. 2B-0858 [1] PLUG  
21. 5K-9243 [1] ELBOW  
22. 8P-3283 [1] TUBE AS.  
23. 5K-9242 [1] UNION  
24. 0T-0102 [3] BOLT  
  5M-2894 C [3] WASHER  
  3P-9200 [3] CLIP  
25. 8P-0018 [1] TUBE AS.  
  6L-3616 [1] CONNECTOR  
26. 8P-0013 Y [1] VALVE GROUP  
27. 5J-5314 C [1] BOLT  
28. 6T-9069 C [1] LOCKNUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11720028
 

8P-0013: VALVE GP-SELECTOR & PRESS CONT

8P0013 SELECTOR & PRESSURE CONTROL VALVE GROUP. SERIAL NO. 35U556 TO
35U1022 INCLUSIVE,36U381 TO 36U397 & 36U400 TO 36U915 INCLUSIVE & 37U355
TO 37U361 & 37U363 TO 37U667 INCLUSIVE.PART OF 3P8505,3P8507 & 3P8509
WINCH ARRANGEMENTS.8P11 VALVE PARTS ARE SHOWN ON PAGE 12. USAGE: ALL D5
AND D6 TRACTORS WITH DRUM DISCONNECT
c168276 SEBP1172
8P0013 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-0011 Y [1] VALVE GROUP  
    (Separate Illustration)
2. 5H-8038 [1] SEAL  
3. 7F-3425 [4] BOLT  
4. 5M-2894 [6] WASHER  
5. 8P-0016 [1] GASKET  
6. 5B-2638 [1] BOLT  
7. 8S-9191 [1] BOLT  
8. 8B-4967 [3] SEAL  
9. 1D-4538 C [1] BOLT  
  9M-1974 [1] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11720029
 

1P-7528: VALVE GP-CONTROL

1P7528 SELECTOR & PRESSURE CONTROL VALVE GROUP-TYPE 1. SERIAL NO.35U1-UP,
36U1-UP. PART OF 1P8627,1P8629,1P8944,1P8626,1P8628 & 1P8943 WINCH
ARRANGEMENTS.2P3640 VALVE PARTS ARE SHOWN ON PAGES 6,7 & 7B. USAGE: ALL
D5 & D6 TRACTORS WITHOUT DRUM DISCONNECT
c208951 SEBP1172
1P7528 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 55 WINCH:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7F-3425 [4] BOLT 14.61 cm(5.75 in.) long  
  5B-2638 [1] BOLT 13.34 cm(5.25 in.) long  
  8S-9191 [1] BOLT 10.16 cm(4 in.) long  
  5M-2894 [6] WASHER  
2. 2P-3640 Y [1] VALVE GROUP  
    (Separate Illustration)
3. 1D-4538 [1] BOLT 5.72 cm(2.25 in.) long  
    -OR-
  1D-4539 C [1] BOLT 6.35 cm(2.50 in.) long  
4. 8B-4967 C [3] SEAL  
5. 8P-0016 C [1] GASKET  
6. 9M-1974 [1] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation Of Winch Adjustable Sequence Valve{5170}
Installation Of Winch Adjustable Sequence Valve{5170}
Installation Of 55 And 56 Winch (35U, 36U, 37U){5163}
Installation Of 55 And 56 Winch (35U, 36U, 37U){5163}
Installation Of 55 And 56 Winch (35U, 36U, 37U){5163}
Installation Of 55 And 56 Winch (35U, 36U, 37U){5163}
Specifications
Magnetic Screen And Input<BR> Clutch Cover (55 and 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Magnetic Screen And Input<BR> Clutch Cover (57, 58 and 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Adjustment Of Bearings For<BR> Input Clutch (57, 58 and 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Adjustment Of Pinion Free Movement (Backlash)<BR> (57, 58 and 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Adjustment Of Bearings For Idler Gears<BR> (55 and 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Adjustment Of Bearings For Idler Gears<BR> (57, 58 and 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Winch Drum<BR> (55 and 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Winch Drum<BR> (57, 58 and 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Mounting Group<BR> (55 and 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Mounting Group<BR> (57 Winch)
55, 56, 57, 58 & 59 TOWING WINCHES
Mounting Group<BR> (58 Winch)
55, 56, 57, 58 & 59 TOWING WINCHES
Mounting Group<BR> (59 Winch)
55, 56, 57, 58 & 59 TOWING WINCHES
Systems Operation
Systems Operation
55, 56, 57, 58 & 59 TOWING WINCHES
Testing and Adjusting
Testing And Adjusting
55, 56, 57, 58 & 59 TOWING WINCHES
Disassembly and Assembly
Magnetic Screen
55, 56, 57, 58 & 59 TOWING WINCHES
Winch Control Valve (With Or Without Drum Disconnect)
55, 56, 57, 58 & 59 TOWING WINCHES
55 And 56 Winch Control Valve (With Drum Disconnect)
55, 56, 57, 58 & 59 TOWING WINCHES
Drum Disconnect (55 And 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Drum (57, 58 And 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Pinion (55 And 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Pinion (Earlier 57, 58 and 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Planetary Carrier Of Clutch Shaft (57, 58 And 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Idler Gears (55 And 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Idler Gears (57,58, And 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Input Clutch (Earlier 55 And 56 Winch Case)
55, 56, 57, 58 & 59 TOWING WINCHES
Input Clutch (Later 55 And 56 Winch Case)
55, 56, 57, 58 & 59 TOWING WINCHES
Input Clutch (55 And 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Input Clutch (57, 58 And 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Bevel Gear And Shaft Assembly (55 And 56 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Bevel Gear And Shaft Assembly (57, 58 and 59 Winches)
55, 56, 57, 58 & 59 TOWING WINCHES
Service Magazine
Adjustable Sequence Valve Permits Better Winch Operation According To The Job{5166,5168,5173,5163}
1980/11/03
New Adjustment Procedure Used To Preload Drum Bearings; New Locknut Used On Winches Equipped With Freespool (Drum Disconnect){5159,5174}
1983/11/07
Lubrication For Towing Winch Input Clutch{5150,5166}
1984/10/01
Winch Improvements, Modifications And Adjustments{5150}
1977/09/26
Less Force Now Needed To Pull Cable From Drum{5150,5159}
1977/10/10
Use FT1467 Wrench To Tighten Winch Mounting Nuts{0614,5163}
1979/06/25

Caterpillar Parts SIS Catalog 55 :

WINCH ARRANGEMENTS
WINCH CONVERSION ARRANGEMENTS
WINCH ARRANGEMENTS - LOW SPEED
BASIC WINCH ARRANGEMENTS - STANDARD SPEED
BASIC WINCH ARRANGEMENTS - STANDARD SPEED
9P-9709 WINCH ARRANGEMENT-SLOW SPEED
WINCH ARRANGEMENT
WINCH ARRANGEMENT
9G-0567 CONVERSION GP-WINCH
CONVERSION GP-WINCH
9G-0568 CONVERSION GP-WINCH
9G-0568 CONVERSION GP-WINCH
CONVERSION GP-WINCH
9G-0563 CONVERSION GP-WINCH
CONVERSION GP-WINCH
9G-0563 CONVERSION GP-WINCH
CONVERSION GP-WINCH
9G-0565 CONVERSION GP-WINCH
CONVERSION GP-WINCH
9G-0566 CONVERSION GP-WINCH
VALVE GP-SELECTOR & PRESS CONT
8P-0013 VALVE GP-SELECTOR & PRESS CONT

Truck sale:

Caterpillar APS550, Construction
154,000 
Caterpillar APS550, Construction
- mobile generator sets
MACALLISTER MACHINERY CO., INC
2011 CAT 550
USD $199,500 
2011 CAT 550

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
2011 CAT 550
USD $225,000 
2011 CAT 550

PONSSE USA INC
Rhinelander, Wisconsin
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.