4N3974 ENGINE ARRANGEMENT-PART 1 ENGINE SERIAL NO. 78P38513 TO 78P40899 INCLUSIVE. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER 955L

4N-3974: ENGINE ARRANGEMENT

4N3974 ENGINE ARRANGEMENT-PART 1
ENGINE SERIAL NO. 78P38513 TO 78P40899 INCLUSIVE. NOTE: WHEN ORDERING
PARTS GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name


		CENTRAL STRUCTURE

2P-6201 Y	[1]	CAMSHAFT GROUP
2P-6218 Y	[1]	CRANKSHAFT GROUP
2P-6224 Y	[1]	CRANKSHAFT SEAL GROUP
2P-6495 Y	[1]	CYLINDER BLOCK COVER GROUP
2P-6540 Y	[1]	CYLINDER BLOCK GROUP
5S-6425 Y	[1]	BALANCER GROUP
9S-8912 Y	[4]	CONNECTING ROD & PISTON GROUP

		UPPER STRUCTURE

6N-8326 Y	[1]	ENGINE LIFTING GROUP
2P-6484 Y	[1]	CYLINDER HEAD GROUP
2P-6514 Y	[1]	VALVE MECHANISM COVER GROUP
2P-6524 Y	[1]	VALVE MECHANISM GROUP
2P-6544 Y	[1]	CYLINDER HEAD FASTENER GROUP

		FRONT STRUCTURE

2P-6246 Y	[1]	TRUNNION GROUP
2P-6498 Y	[1]	FRONT HOUSING FASTENER GROUP
2P-6528 Y	[1]	FRONT HOUSING COVER GROUP
2P-7756 Y	[1]	ENGINE SUPPORT GROUP
2P-8598 Y	[1]	CRANKSHAFT HUB GROUP
2P-8608 Y	[1]	PULLEY GROUP
2P-9641 Y	[1]	FRONT HOUSING GROUP
2P-9642 Y	[1]	FRONT TIMING GEAR GROUP

		REAR STRUCTURE

2P-6119 Y	[1]	FLYWHEEL HOUSING GROUP
7S-7753 Y	[1]	FLYWHEEL GROUP

		LOWER STRUCTURE

2P-6155 Y	[1]	OIL PAN GROUP
2P-6189 Y	[1]	OIL PAN FASTENER GROUP
Y		SEPARATE ILLUSTRATION

4N-3974: ENGINE ARRANGEMENT

ENGINE ARRANGEMENT

4N3974 ENGINE ARRANGEMENT-PART 2
ENGINE SERIAL NO. 78P38513 TO 78P40899 INCLUSIVE. NOTE: WHEN ORDERING
PARTS GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name


		LUBRICATION SYSTEM

4N-4817 Y	[1]	OIL FILLER GROUP
1P-4244 Y	[1]	BREATHER GROUP
2P-1784 Y	[1]	OIL PUMP GROUP
2P-6475 Y	[1]	OIL FILTER GROUP
2P-6494 Y	[1]	OIL LEVEL GAUGE GROUP
2P-6512 Y	[1]	OIL LINES GROUP

		COOLING SYSTEM

2P-0662 RY	[1]	WATER PUMP GROUP
2P-6188 Y	[1]	WATER LINES GROUP
2P-6215 Y	[1]	OIL COOLER GROUP
2P-7740 Y	[1]	WATER LINES GROUP-ELBOW

		INTAKE AND EXHAUST SYSTEM

4N-3924 Y	[1]	TURBOCHARGER OIL LINES GROUP
4N-9584 Y	[1]	EXHAUST MANIFOLD FASTENER GROUP
1P-8533 Y	[1]	TURBOCHARGER GROUP
2P-6571 Y	[1]	EXHAUST MANIFOLD GROUP
2P-7337 Y	[1]	AIR LINES GROUP

		FUEL SYSTEM AND GOVERNOR

4N-3287 Y	[1]	FUEL PRIMING PUMP GROUP
4N-4510 Y	[1]	GOVERNOR COVER GROUP
6N-0281 Y	[1]	GOVERNOR & FUEL INJECTION PUMP GROUP
6N-0728 Y	[1]	FUEL INJECTION LINES GROUP
		-OR-
7N-3461 Y	[1]	FUEL INJECTION LINES GROUP
6N-5916 Y	[1]	FUEL FILTER GROUP
7N-3651 Y	[1]	DRAIN LINES GROUP

		STARTING AND ELECTRICAL SYSTEM

5S-8500 Y	[1]	GLOW PLUG GROUP

		NOTE: REFER TO INDEX FOR PAGE LOCATION
		OF GASKET KITS
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

7N-1524: ENGINE AR

ENGINE AR

7N1524 ENGINE ARRANGEMENT-PART 1
3304 ENGINE SERIAL NO. 78P40900-UP. NOTE: WHEN ORDERING PARTS GIVE
ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name


		CENTRAL STRUCTURE

2P-6201 Y	[1]	CAMSHAFT GROUP
2P-6218 Y	[1]	CRANKSHAFT GROUP
		-OR-
6N-8080 Y	[1]	CRANKSHAFT GROUP
2P-6224 Y	[1]	CRANKSHAFT SEAL GROUP
2P-6495 Y	[1]	CYLINDER BLOCK COVER GROUP
		-OR-
7N-1088 Y	[1]	CYLINDER BLOCK COVER GROUP
2P-6540 Y	[1]	CYLINDER BLOCK GROUP
		-OR-
7N-8014 Y	[1]	CYLINDER BLOCK GROUP
5S-6425 Y	[1]	BALANCER GROUP
9S-8912 Y	[4]	CONNECTING ROD & PISTON GROUP

		UPPER STRUCTURE

6N-8326 Y	[1]	ENGINE LIFTING GROUP
		-OR-
8N-9696 Y	[1]	ENGINE LIFTING GROUP
2P-6484 Y	[1]	CYLINDER HEAD GROUP
		-OR-
6N-8101 Y	[1]	CYLINDER HEAD GROUP
2P-6514 Y	[1]	VALVE MECHANISM COVER GROUP
2P-6524 Y	[1]	VALVE MECHANISM GROUP
		-OR-
7N-8024 Y	[1]	VALVE MECHANISM GROUP
2P-6544 Y	[1]	CYLINDER HEAD FASTENER GROUP
		-OR-
7N-9534 Y	[1]	CYLINDER HEAD FASTENER GROUP

		FRONT STRUCTURE

7N-2887 Y	[1]	CRANKSHAFT PULLEY GROUP
2P-6246 Y	[1]	TRUNNION GROUP
		-OR-
7N-9589 Y	[1]	TRUNNION GROUP
2P-6498 Y	[1]	FRONT HOUSING FASTENER GROUP
2P-6528 Y	[1]	FRONT HOUSING COVER GROUP
2P-7753 Y	[1]	ENGINE SUPPORT GROUP-FRONT
2P-8598 Y	[1]	CRANKSHAFT HUB GROUP
2P-9641 Y	[1]	FRONT HOUSING GROUP
2P-9642 Y	[1]	FRONT TIMING GEAR GROUP

		REAR STRUCTURE

2P-6119 Y	[1]	FLYWHEEL HOUSING GROUP
7S-7753 Y	[1]	FLYWHEEL GROUP

		LOWER STRUCTURE

2P-6155 Y	[1]	OIL PAN GROUP
2P-6189 Y	[1]	OIL PAN FASTENER GROUP
Y		SEPARATE ILLUSTRATION

7N-1524: ENGINE AR

ENGINE AR

7N1524 ENGINE ARRANGEMENT-PART 2
3304 ENGINE SERIAL NO. 78P40900-UP. NOTE: WHEN ORDERING PARTS GIVE
ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name


		LUBRICATION SYSTEM

4N-4817 Y	[1]	OIL FILLER GROUP
1P-4244 Y	[1]	BREATHER GROUP
2P-1784 Y	[1]	OIL PUMP GROUP
2P-6475 Y	[1]	OIL FILTER GROUP
2P-6494 Y	[1]	OIL LEVEL GAUGE GROUP
2P-6512 Y	[1]	OIL LINES GROUP

		COOLING SYSTEM

7N-5909 Y	[1]	WATER PUMP GROUP
7N-7211 Y	[1]	WATER LINES GROUP
2P-6215 Y	[1]	OIL COOLER GROUP
2P-7740 Y	[1]	WATER LINES GROUP-ELBOW

		INTAKE AND EXHAUST SYSTEM

4N-3924 Y	[1]	TURBOCHARGER OIL LINES GROUP
4N-9584 Y	[1]	EXHAUST MANIFOLD FASTENER GROUP
7N-3228 Y	[1]	AIR LINES GROUP
1P-8533 Y	[1]	TURBOCHARGER GROUP
2P-6571 Y	[1]	EXHAUST MANIFOLD GROUP

		FUEL SYSTEM AND GOVERNOR

4N-3287 Y	[1]	FUEL PRIMING PUMP GROUP
6N-5916 Y	[1]	FUEL FILTER GROUP
		-OR-
8N-4471 Y	[1]	FUEL PRIMING & PRIMARY FILTER PUMP GROUP
4N-4510 Y	[1]	GOVERNOR COVER GROUP
6N-0281 Y	[1]	GOVERNOR & FUEL INJECTION PUMP GROUP
		-OR-
7N-0929 Y	[1]	GOVERNOR & FUEL INJECTION PUMP GROUP
7N-3461 Y	[1]	FUEL INJECTION LINES GROUP
7N-3651 Y	[1]	DRAIN LINES GROUP

		STARTING AND ELECTRICAL SYSTEM

5S-8500 Y	[1]	GLOW PLUG GROUP

		NOTE: REFER TO INDEX FOR PAGE LOCATION
		OF GASKET KITS
Y		SEPARATE ILLUSTRATION

2P-6540: CYLINDER BLOCK GP

CYLINDER BLOCK GP

2P6540 CYLINDER BLOCK GROUP
ENGINE SERIAL NO. 78P38513 TO 78P47096 INCLUSIVE
2P8774 BLOCK PARTS ARE SHOWN ON PAGE 9

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-9307	[1]	PLUG
	6F-7062	[1]	GASKET
2.	7H-3171	[1]	PLUG
3.	5S-6670	[12]	SEAL
4.	2P-8889	[4]	LINER
5.	5M-6214	[1]	PLUG
6.	2P-8774 RY	[1]	BLOCK ASSEM.
			(Separate Illustration)
7.	9L-5854 C	[4]	BAND
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION
	C		INDICATES CHANGE

2P-6495: COVER GP

COVER GP

2P6495 CYLINDER BLOCK COVER GROUP
ENGINE SERIAL NO. 78P38513 TO 78P47096 INCLUSIVE

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0L-1351 C	[10]	BOLT
2.	8L-8662 C	[1]	COVER
	5S-8055	[1]	GASKET
3.	5M-2894 C	[12]	WASHER
4.	2A-3798	[2]	DOWEL
5.	8S-0876	[1]	COVER
	8S-0877	[1]	GASKET
6.	1A-2029 C	[2]	BOLT
7.	5M-1903	[1]	COVER
	4M-2250	[1]	GASKET
8.	8M-3267 C	[1]	SCREW
9.	4B-5387		PLUG 2.40 cm(.945 in.) diameter
			-OR-
	4B-3938 C		PLUG 2.89 cm(1.138 in.) diameter
	C		INDICATES CHANGE

7N-1088: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

7N1088 CYLINDER BLOCK COVER GROUP
ENGINE SERIAL NO. 78P47097-UP

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-3938	[1]	PLUG-CUP
2.	2A-3798	[2]	DOWEL
3.	1A-2029	[2]	BOLT
4.	5M-2894	[4]	WASHER
5.	4M-2250	[1]	GASKET
6.	5M-1903	[1]	COVER
7.	8L-8662	[1]	COVER
8.	5S-8055	[1]	GASKET
9.	0L-1351	[2]	BOLT
10.	8M-3267	[1]	SCREW-HEX SOCKET

7N-8014: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8014 CYLINDER BLOCK GROUP
ENGINE SERIAL NO. 78P47097 TO 78P57459 INCLUSIVE
6N8127 BLOCK PARTS ARE SHOWN ON PAGE 9B

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-5496	[1]	SEAL-O-RING
2.	2P-8889	[4]	LINER-CYLINDER
3.	7H-3171	[1]	PLUG-PIPE
4.	3J-5389	[2]	PLUG
5.	8M-9307	[1]	PLUG-DRAIN
	6F-7062	[1]	WASHER
6.	5M-6213	[2]	PLUG
7.	9L-5854 C	[4]	BAND-FILLER
8.	7N-8021	[1]	PLATE-BLOCK
9.	5S-6670	[12]	SEAL-O-RING
10.	7N-8020	[1]	GASKET-PLATE
11.	6N-8127 Y	[1]	CYLINDER BLOCK GP
12.	5M-6214	[1]	PLUG-PIPE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

7N-8014: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8014 CYLINDER BLOCK GROUP
ENGINE SERIAL NO. 78P57460-UP
7N6552-PAGE 8D

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-5496	[1]	SEAL-O-RING
2.	1S-9540	[1]	DOWEL
3.	7H-3171	[1]	PLUG-PIPE
4.	2B-0858 C	[3]	PLUG-PIPE
5.	8M-9307	[1]	PLUG-DRAIN
	6F-7062	[1]	WASHER
6.	5M-6213	[2]	PLUG
7.	7M-4046	[2]	BEARING-SLEEVE
8.	7N-8021	[1]	PLATE-BLOCK
9.	5B-7652	[2]	DOWEL
10.	7W-7544 C	[1]	GASKET-PLATE
11.	7N-6552 CY	[1]	CYLINDER BLOCK AS
12.	5M-6214	[1]	PLUG-PIPE
13.	8K-1207	[2]	PIN-DOWEL
14.	8B-6349	[2]	DOWEL
15.	5S-8462	[1]	STUD
16.	8N-4110	[1]	BEARING-SLEEVE
17.	4B-9782	[5]	BALL
18.	5S-6419	[4]	BEARING-SLEEVE
19.	5S-6420	[2]	BEARING-SLEEVE
20.	4B-5387	[1]	PLUG-CUP
21.	4B-3938 C	[1]	PLUG-CUP
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Introduction
3304 VEHICULAR ENGINE

Engine Design
3304 VEHICULAR ENGINE

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

Systems Operation
3304 VEHICULAR ENGINE

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Testing and Adjusting

Testing And Adjusting
3304 VEHICULAR ENGINE

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Loaders {0372, 1000, 7000, 753S, 7565}

Disassembly and Assembly

Engine
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 955L :

Truck sale:

Caterpillar 955L
- track loaders
FOLEY EQUIPMENT COMPANY

19,200

Caterpillar 955L, Construction
- track loaders
FOLEY EQUIPMENT COMPANY

Caterpillar 955L, Construction
- track loaders
NMC

Caterpillar 955L, Construction
- track loaders
FABICK CAT

17,000

Caterpillar 955L, Construction
- track loaders
HOLT CAT