POWER TRAIN
TRANSMISSION GPVALVE GP-RELIEF
FILLER GP-POWER TRAIN OIL
LINES GP-FILTER
FILTER GP
SCREEN GP
LINES GP-PUMP
GEAR GP
POWER TAKE-OFF GP
POWER TRAIN
TRANSMISSION GP#SEBP11830280
3V-6940: MOUNTING GP-TRANSMISSION
3V6940 TRANSMISSION MOUNTING GROUP
#SEBP11830281
3S-6860: VALVE GP-RELIEF
3S6860 RELIEF VALVE GROUP
IF TRANSMISSION IS SERIALIZED USE TRANSMISSION SERIAL NO. OTHERWISE USE
VEHICLE SERIAL NO. SERIAL NO. 13X1 TO 13X2463 INCLUSIVE. TRANSMISSION
SERIAL NO. 2ZA1-UP. PART OF 8P8926 TRANSMISSION GROUP SHOWN ON PAGE 107
IF TRANSMISSION IS SERIALIZED USE TRANSMISSION SERIAL NO. OTHERWISE USE
VEHICLE SERIAL NO. SERIAL NO. 13X1 TO 13X2463 INCLUSIVE. TRANSMISSION
SERIAL NO. 2ZA1-UP. PART OF 8P8926 TRANSMISSION GROUP SHOWN ON PAGE 107
#SEBP11830282
3V-6938: FILLER GP-POWER TRAIN OIL
3V6938 BEVEL GEAR OIL FILLER GROUP
Parts for your 955L TRACK LOADER:
CATERPILLAR SIS#SEBP11830283
3V-6939: FILLER GP-POWER TRAIN OIL
3V6939 TRANSMISSION OIL FILLER GROUP
Parts for your 955L TRACK LOADER:
CATERPILLAR SIS#SEBP11830284
3V-6937: LINES GP-FILTER
3V6937 TRANSMISSION FILTER LINES GROUP
9M8669 SCREEN & 9P6447 FILTER PARTS ARE SHOWN ON PAGE 120
9M8669 SCREEN & 9P6447 FILTER PARTS ARE SHOWN ON PAGE 120
Parts for your 955L TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2V-9808 | [1] | PLATE | |
2. | 0L-1351 | [2] | BOLT | |
3. | 5P-1075 | [4] | WASHER | |
4. | 032-9267 | [2] | ELBOW | |
5. | 3V-6650 | [1] | BLOCK | |
5F-8000 | [1] | SEAL | ||
6. | 1T-0765 | [2] | BOLT | |
7. | 9M-8669 Y | [1] | SCREEN GROUP | |
(Separate Illustration) | ||||
8. | 3V-6902 | [1] | MANIFOLD | |
9. | 0S-1585 | [16] | BOLT | |
10. | 3B-4508 | [15] | LOCKWASHER | |
11. | 1P-4579 | [4] | FLANGE | |
12. | 5P-8245 | [8] | WASHER | |
13. | 4V-0269 | [1] | HOSE ASSEM. | |
14. | 4J-0524 | [4] | SEAL | |
15. | 6J-2515 | [2] | BOLT | |
16. | 3V-6649 | [1] | BLOCK | |
8M-4443 | [1] | SEAL | ||
17. | 0S-1588 | [8] | BOLT | |
5M-2894 | [8] | WASHER | ||
18. | 1P-4576 | [4] | FLANGE | |
4J-5267 | [2] | SEAL | ||
19. | 3V-9808 | [1] | HOSE ASSEM. | |
(Includes) | ||||
5P-0180 H | HOSE 42 cm(16.54 in.) | |||
3S-7166 | [2] | SLEEVE | ||
3S-8363 | [1] | COUPLING ASSEM. (90 DEGREES) | ||
8S-3759 | [1] | COUPLING ASSEM. (straight) | ||
20. | 3D-2824 | [2] | SEAL | |
21. | 030-7950 | [1] | ELBOW (to manifold) | |
22. | 1D-4719 | [5] | NUT | |
23. | 8M-5254 | [2] | SEAL | |
24. | 3V-6882 | [1] | MANIFOLD | |
25. | 3V-9825 | [1] | HOSE ASSEM. | |
(Includes) | ||||
5P-0180 H | HOSE 52 cm(20.47 in.) | |||
3S-8363 | [1] | COUPLING ASSEM. (90 DEGREES) | ||
3S-7166 | [2] | SLEEVE | ||
8S-3759 | [1] | COUPLING ASSEM. (straight) | ||
26. | 030-7944 | [1] | ELBOW (to manifold) | |
27. | 4V-0684 | [1] | BLOCK | |
8M-4986 | [2] | SEAL | ||
28. | 6H-1717 | [3] | BOLT | |
29. | 9P-6447 Y | [1] | FILTER GROUP | |
(Separate Illustration) | ||||
30. | 0S-1594 | [2] | BOLT | |
31. | 4V-0268 | [1] | HOSE ASSEM. | |
2S-4078 | [2] | SEAL | ||
H | ORDER BY THE CENTIMETRE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP11830285
9P-6447: FILTER GP-TRANSMISSION
9P6447 TRANSMISSION FILTER GROUP
PART OF 3V6937 TRANSMISSION FILTER LINES GROPU SHOWN ON PAGE 119
PART OF 3V6937 TRANSMISSION FILTER LINES GROPU SHOWN ON PAGE 119
Parts for your 955L TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7S-8700 | [1] | COVER ASSEM. | |
(Includes) | ||||
2. | 3S-4398 | [1] | STUD | |
3. | 2H-3928 | [1] | SEAL | |
4. | 9S-4191 | [1] | PLUG | |
3J-1907 | [1] | SEAL | ||
5. | 7B-3235 | [6] | BOLT | |
6. | 5K-1770 | [1] | SEAL | |
7. | 9P-6442 | [1] | HOUSING | |
8. | 9M-9740 | [1] | ELEMENT | |
-OR- | ||||
1U-2093 CH | [1] | ELEMENT | ||
(For use with fire resistant hydraulic system) | ||||
9. | 2S-6462 | [1] | RETAINER | |
10. | 9S-4205 | [1] | PLUG | |
7M-8485 | [1] | SEAL | ||
11. | 2H-3788 | [1] | NUT | |
12. | 8F-8882 | [2] | SEAL | |
13. | 3T-0688 C | [1] | SPOOL | |
14. | 9M-1986 | [1] | SPRING | |
15. | 9S-8008 | [1] | PLUG | |
16. | 3D-2824 | [1] | SEAL | |
C | INDICATES CHANGE | |||
H | NOT PART OF 9P6447 |
#SEBP11830286
9M-8669: SCREEN GP-MAGNETIC
9M8669 MAGNETIC SCREEN GROUP
PART OF 3V6937 TRANSMISSION FILTER LINES GROUP SHOWN ON PAGE 119
PART OF 3V6937 TRANSMISSION FILTER LINES GROUP SHOWN ON PAGE 119
Parts for your 955L TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3D-2871 | [4] | STUD (TAPERLOCK) | |
2. | 1D-4717 | [4] | NUT (FULL) | |
3. | 3S-3439 | [1] | COVER-TOP | |
4. | 3S-3440 | [1] | WASHER-WAVE | |
5. | 8T-7196 C | [2] | SEAL-FACE | |
6. | 3S-3875 | [1] | SCREEN-SUCTION | |
7. | 9W-5531 C | [1] | TUBE AS-SCREEN | |
8. | 8M-7160 C | [4] | MAGNET | |
9. | 1J-8668 | [4] | STUD-TAPERLOCK 50.8MM(2IN)LG | |
-OR- | ||||
8M-1047 | [4] | STUD-TAPERLOCK 43.2MM(1.70IN)LG | ||
-OR- | ||||
2M-4779 | [4] | STUD-TAPERLOCK 45.7MM(1.80IN)LG | ||
10. | 8M-7166 | [1] | HOUSING-SCREEN | |
11. | 1D-4717 | [4] | NUT (FULL) | |
5M-2894 C | [4] | WASHER | ||
C | CHANGE FROM PREVIOUS TYPE |
#SEBP11830287
3V-6941: LINES GP-PUMP
3V6941 BEVEL GEAR PUMP LINES AND FILTER GROUP
3S7406 FILTER PARTS ARE SHOWN ON PAGE 123
3S7406 FILTER PARTS ARE SHOWN ON PAGE 123
Parts for your 955L TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1D-4717 | [2] | NUT | |
2. | 5P-1075 | [4] | WASHER | |
3. | 3S-7406 Y | [11] | FILTER GROUP | |
(Separate Illustration) | ||||
4. | 3V-7041 | [1] | MANIFOLD | |
5K-8347 | [1] | GASKET | ||
5. | 7B-3235 | [3] | BOLT | |
5P-1076 | [3] | WASHER | ||
6. | 3V-9801 | [1] | HOSE ASSEM. (not serv) | |
For Service Furnish: | ||||
5P-0180 H | HOSE 103.50 cm(40.55 in.) | |||
7. | 3S-7166 | [2] | SLEEVE | |
8. | 8S-3759 | [1] | COUPLING ASSEM. (straight) | |
7S-1712 C | [1] | STEM ASSEM. (100 degrees) | ||
9. | 0L-1351 C | [8] | BOLT | |
10. | 4F-7952 | [2] | SEAL | |
11. | 5F-1678 | [2] | SEAL | |
12. | 4V-0190 | [1] | ELBOW | |
13. | 3D-2824 | [1] | SEAL | |
14. | 1T-0765 | [2] | BOLT | |
15. | 030-7950 C | [1] | ELBOW | |
16. | 6K-0184 | [1] | TUBE ASSEM. | |
17. | 5K-6050 | [1] | SCREEN ASSEM. | |
18. | 9H-6067 | [1] | SEAL | |
19. | 1H-8128 | [1] | SEAL | |
20. | 5K-6060 | [1] | COVER | |
21. | 0S-1594 C | [2] | BOLT | |
22. | 5P-5148 C | [1] | STRAP | |
23. | 1P-4577 | [4] | FLANGE | |
24. | 4J-0520 | [2] | SEAL | |
25. | 3B-1915 | [12] | BOLT | |
26. | 5M-2894 C | [10] | WASHER | |
27. | 3V-9802 | [1] | HOSE ASSEM. (not serv) | |
For Service Furnish: | ||||
5P-0180 H | HOSE 43 cm(16.92 in.) | |||
28. | 3S-8363 | [1] | STEM ASSEM. (straight) | |
29. | 3S-7166 | [2] | SLEEVE | |
30. | 7S-1712 | [1] | STEM ASSEM. (90 degrees) | |
31. | 3V-9799 | [1] | BRACKET | |
32. | 1P-4576 | [2] | FLANGE | |
4J-5267 | [1] | SEAL | ||
H | ORDER BY THE METRE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP11830288
9K-0715: GEAR GP-BEVEL
9K715 BEVEL GEAR GROUP
Parts for your 955L TRACK LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9K-0447 | [1] | SHAFT (11 Teeth) | |
2. | 0L-1351 | [4] | BOLT | |
3H-6237 | [2] | LOCK | ||
3. | 0S-1595 | [4] | BOLT | |
3K-3179 | [2] | LOCK | ||
4. | 3K-3658 | [1] | SHIM | |
5. | 9F-7105 | [1] | RACE AND ROLLER ASSEM. | |
6. | 2M-3412 | [1] | DOWEL | |
7. | 2A-3746 | [1] | PLUG | |
8. | 6K-3360 | [1] | SPACER | |
9. | 5K-8953 | [1] | COUPLER | |
10. | 6K-8207 | [1] | COVER | |
1A-3284 | [2] | DOWEL | ||
11. | 0S-1587 | [10] | BOLT | |
3B-4508 | [10] | LOCKWASHER | ||
12. | 2K-4472 | [1] | "O" RING | |
13. | 5K-9066 | [1] | GASKET | |
14. | 5K-9060 | [1] | BEARING | |
15. | 5K-8955 | [1] | RETAINER | |
16. | 4K-4376 | [2] | SEAL | |
17. | 5K-9064 | [2] | RING (External) | |
18. | 1A-2029 | [12] | BOLT | |
19. | 5K-9059 | [3] | LOCK | |
20. | 5K-6155 | [1] | SEAL | |
21. | 5K-6157 | [1] | SEAL | |
22. | 1A-1460 | [11] | BOLT | |
3H-7654 | [11] | WASHER | ||
23. | 5K-9065 | [1] | RING (internal) | |
24. | 6K-4004 | [2] | LOCK | |
25. | 5K-8954 | [1] | CAGE | |
26. | 5K-9063 | [1] | OUTER RACER | |
27. | 5K-5959 | [1] | SEAL | |
28. | 4K-6613 | [2] | RING | |
29. | 5P-3086 C | [1] | BEARING ASSEM. | |
30. | 3K-2895 | [1] | CAGE | |
31. | 8K-5153 | [1] | RETAINER | |
C | INDICATES CHANGE |
#SEBP11830289
4V-5192: REAR POWER TAKE-OFF ARRANGEMENT
4V5192 REAR POWER TAKE-OFF ARRANGEMENT
AN ATTACHMENT
AN ATTACHMENT
Parts for your 955L TRACK LOADER:
CATERPILLAR SISInformation:
POWER TRAIN
TRANSMISSION GP
Special Instruction
Installation Of 5V5862 Transmission Control Service Group{3156}
Installation Of 5V5862 Transmission Control Service Group{3156}
Installation Of 5V5862 Transmission Control Service Group{3156}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Technical Information Bulletin
Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding
Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding
Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding
Specifications
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Bearing Bores in Hydrostatic Transmission Cases{3030, 3064, 3064, 7551}
Bearing Bores in Hydrostatic Transmission Cases{3030, 3064, 3064, 7551}
Bearing Bores in Hydrostatic Transmission Cases{3030, 3064, 3064, 7551}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission And Governor Control Linkage (955L)
955L, 977L & 983B TRACK-TYPE LOADERS OPERATOR'S STATION
955L, 977L & 983B TRACK-TYPE LOADERS OPERATOR'S STATION
Transmission And Governor Control Linkage (977L & 983B)
955L, 977L & 983B TRACK-TYPE LOADERS OPERATOR'S STATION
955L, 977L & 983B TRACK-TYPE LOADERS OPERATOR'S STATION
Service Magazine