AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9P3459 TRANSMISSION ARRANGEMENT 2P2945 Planetary Transmission, 2P2946 Transfer Gear, 1T1040 Torque Converter and 9P3433 Transmission Lubrication System Control parts are shown on Pages 54 through 58 and 60 931


POWER TRAIN
TRANSMISSION GP
GEAR GP
TORQUE CONVERTER GP
OPERATOR STATION
CONTROL GP-TRANSMISSION
POWER TRAIN
CONTROL GP-XMSN OIL SYSTEM
VALVE GP
PUMP GP

TRACK LOADER 931 TRACK LOADER 10N
 931 LGP TRAXCAVATOR 10N00526-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1191 931 10N   (1973)

POWER TRAIN

TRANSMISSION GP
TRANSMISSION ARRANGEMENT
9P-3459 TRANSMISSION ARRANGEMENT
PLANETARY GP
2P-2945 PLANETARY GP
2P-2945 PLANETARY GP
 

#SEBP11910070
 

9P-3459: TRANSMISSION ARRANGEMENT

9P3459 TRANSMISSION ARRANGEMENT
2P2945 Planetary Transmission, 2P2946 Transfer Gear, 1T1040 Torque Converter and
9P3433 Transmission Lubrication System Control parts are shown on Pages 54
through 58 and 60
c217412 SEBP1191
9P3459 TRANSMISSION ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2946 [1] TRANSFER GEARS  
2. 2P-2945 [1] PLANETARY TRANSMISSION  
3. 9P-3433 [1] TRANSMISSION LUB. SYSTEM CONTROL  
4. 1T-1040 Y [1] TORQUE CONVERTER GROUP  
    (Separate Illustration)
  3P-5529 H [1] COVERS GROUP  
  H   NOT SHOWN-SHIPPING & STORAGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP11910071
 

2P-2945: PLANETARY GP

2P2945 PLANETARY TRANSMISSION GROUP--Part 1 of 2
Part of 9P3459 Transmission Arrangement shown on Page 53
c217165 SEBP1191
2P2945 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-0743 [1] HOUSING ASSEM.  
  4B-9880 [1] BALL  
2. 9S-6897 [1] GEAR (54 Teeth)  
3. 9S-8417 [1] CARRIER ASSEM.  
4. 9S-2774 [3] SHAFT  
5. 9S-6931 [1] PLATE ASSEM.  
  9F-2049 [2] DOWEL  
6. 2P-3605 [1] HOUSING ASSEM.  
  2D-6642 [2] BALL (.250 in. Dia.)  
  4B-9880 [1] BALL (.3127 in. Dia.)  
  5B-5821 C [2] DOWEL  
7. 9S-6958 [1] BEARING  
8. 9S-6932 [1] HOUSING ASSEM.  
  4L-4644 [1] STUD  
  5B-5821 C [2] DOWEL  
9. 9S-6895 [1] PISTON  
10. 9S-8405 [12] SPRING  
11. 9S-6951 [1] PISTON  
12. 9S-6899 [1] HOUSING  
13. 9S-6949 [1] MANIFOLD  
14. 6P-6035 C [1] MANIFOLD ASSEM.  
  8S-3426 [1] DOWEL  
  4B-9782 [1] BALL  
15. 1H-5403 [1] BOLT  
  9S-8413 [1] WASHER  
16. 9S-6918 [2] SEAL  
17. 9S-6913 [1] SEAL  
18. 9S-6914 [1] SEAL  
19. 9S-6924 [1] BEARING  
20. 2M-3974 [1] RING  
21. 3S-6874 [1] RING  
22. 2D-1523 [1] RING  
23. 9S-6891 [1] HUB (24 Teeth)  
24. 8H-0350 [4] RING  
25. 9F-7383 [1] SEAL  
26. 5M-2055 [12] ROLLER ASSEM.  
27. 8S-3553 [1] PLATE (Serial No.)  
28. 7B-3028 [2] SCREW  
  C   INDICATES CHANGE
 

#SEBP11910072
 

2P-2945: PLANETARY GP

2P2945 PLANETARY TRANSMISSION GROUP--Part 2 of 2
Part of 9P3459 Transmission Arrangement shown on Page 53
c217166 SEBP1191
2P2945 PLANETARY GP Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8416 [1] CARRIER ASSEM.  
2. 9S-2774 [3] SHAFT  
3. 9S-6894 [1] GEAR (19 Teeth)  
4. 2S-1418 [12] WASHER  
5. 9S-2772 [6] GEAR (20 Teeth)  
6. 9S-8410 [6] SPACER  
7. 9S-6898 [1] GEAR (23 Teeth)  
8. 2S-5818 [8] BOLT  
9. 9S-5209 [5] PLATE  
10. 2P-3747 [4] DISC ASSEM.  
11. 2A-4639 C [5] BOLT  
12. 5M-2894 [16] WASHER  
13. 6J-0934 [5] BOLT  
14. 8S-3370 [1] RING  
  9S-6929 [1] SEAL  
15. 9S-6917 [1] GEAR (54 Teeth)  
16. 3K-5733 [18] SPRING  
17. 9S-5261 [6] PLATE  
18. 9S-6910 [1] GEAR (54 Teeth)  
19. 2P-3719 [9] DISC ASSEM.  
20. 9S-5211 [6] PLATE  
21. 2P-3596 [2] PISTON  
22. 9S-6911 [3] RING  
23. 1D-4717 [6] NUT  
24. 2P-3597 [2] RING  
25. 1T-0414 [6] BOLT  
  9S-5282 [6] WASHER  
26. 1A-5822 [2] BOLT  
  2M-0849 [2] WASHER  
  C   INDICATES CHANGE
 

#SEBP11910073
 

2P-2946: TRANSFER GEAR GROUP

2P2946 TRANSFER GEAR GROUP--Part 1 of 2
Part of 9P3459 Transmission Arrangement shown on Page 53
c161581 SEBP1191
2P2946 TRANSFER GEAR GROUP Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-7902 C [1] CASE ASSEM.  
2. 9S-1343 [1] PLUG  
3. 9S-6944 [1] TUBE ASSEM.  
4. 0S-0509 [1] BOLT  
  9M-0909 [1] LOCK  
5. 7M-9906 [1] BEARING  
6. 1F-3759 [1] BEARING  
7. 6P-7899 C [1] COVER ASSEM.  
8. 8S-5989 [4] COVER  
9. 1A-2727 [2] GASKET  
10. 3H-0107 [1] SEAL  
11. 2P-3615 [1] SHIM PACK  
12. 0S-1618 [6] BOLT  
13. 2P-2942 [1] CAGE  
14. 3K-2876 [1] SEAL  
15. 2P-3633 [1] FLANGE ASSEM.  
16. 0L-1024 [1] PLUG  
17. 9S-3582 [2] CONE  
  9S-3581 [2] CUP  
18. 2P-3612 [1] GEAR (49 teeth)  
19. 1S-6119 [1] SEAL  
20. 2B-2695 [15] BOLT  
21. 3B-4505 [21] LOCKWASHER  
22. 6P-7900 C [1] GASKET  
23. 1Y-7118 [1] FLANGE  
  7H-2783 [1] GASKET  
24. 1D-4717 [6] NUT  
25. 3B-4506 [6] LOCKWASHER  
26. 8S-5820 [1] BREATHER  
  C   INDICATES CHANGE
 

#SEBP11910074
 

2P-2946: TRANSFER GEAR GROUP

2P2946 TRANSFER GEAR GROUP--Part 2 of 2
Part of 9P3459 Transmission Arrangement shown on Page 53
c161582 SEBP1191
2P2946 TRANSFER GEAR GROUP Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-1427 [1] SEAL  
2. 5P-0356 [1] BEARING  
3. 2P-3565 [1] CAGE  
4. 5M-7936 [1] RACE AND ROLLER ASSEM. (outer)  
  9S-6963 [1] RACE (inner)  
5. 0S-1618 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
6. 2P-3592 [1] GEAR (38 teeth)  
7. 2D-5658 [1] BEARING  
8. 8S-9104 [1] RING  
9. 4M-7092 [1] RING  
10. 2M-3340 [1] SEAL  
11. 9S-6977 [1] SHAFT  
12. 1A-2029 [11] BOLT  
13. 5J-4715 [12] WASHER  
14. 7H-7954 [1] BOLT  
15. 9S-8004 C [2] PLUG  
  3J-1907 [2] SEAL  
16. 6B-5262 [1] PLUG  
  6K-5551 [1] GASKET  
  C   INDICATES CHANGE
 

#SEBP11910075
 

1T-1040: TORQUE CONVERTER GP

1T1040 TORQUE CONVERTER GROUP
Part of 9P3459 Transmission Arrangement shown on Page 53
c156650 SEBP1191
1T1040 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1T-1001 [1] HOUSING AS  
2. 1T-1002 [1] GEAR-DRIVE (48 TEETH)  
3. 3B-1915 [8] BOLT  
4. 5P-0076 [4] BOLT-12 POINT HEAD  
5. 2J-5850 [2] PIN  
6. 1T-1231 C [1] RING-SEAL  
7. 1T-0994 [1] BALL BEARING  
8. 1T-1054 [1] FLANGE AS-MOUNTING  
9. 2M-2827 [1] BEARING-SLEEVE  
10. 1T-1003 [1] SPIDER-DRIVE  
11. 1T-1004 [1] RING-RETAINING  
12. 1T-1230 C [1] RING-SEAL  
13. 3K-6837 [1] RING-RETAINING  
14. 1T-0996 [1] HUB-SPLINED  
15. 1J-6470 [1] RING-RETAINING  
16. 1T-0993 [1] BALL BEARING  
17. 0S-1594 [12] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP11910076
 

6S-3535: TRANSMISSION CONTROL GROUP

6S3535 TRANSMISSION CONTROL GROUP
c217161 SEBP1191
6S3535 TRANSMISSION CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0509 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
2. 6S-4087 [1] GUARD ASSEM.  
3. 7M-0706 [1] KNOB  
4. 6S-3849 [1] LEVER  
5. 6S-3790 [1] PLATE  
  4B-1280 C [4] SCREW  
6. 6S-8892 [1] LOCK ASSEM.  
7. 6S-4451 [1] SHAFT  
8. 3B-4617 [2] COTTER PIN  
9. 6K-3427 [1] PIN  
  3B-4621 [1] COTTER PIN  
10. 6S-9013 C [1] LEVER ASSEM.  
    (Includes)
11. 9H-2400 [3] BEARING  
12. 6S-3903 [1] BRACKET ASSEM.  
    (Includes)
13. 4K-4658 [1] STUD  
  6S-9199 C [1] WASHER  
14. 6S-3819 [1] SHAFT  
15. 0T-0883 [4] WASHER (use as required)  
16. 6S-9025 C [1] LEVER ASSEM.  
    (Includes)
17. 9H-2400 [2] BEARING  
18. 5L-4872 [2] ROD  
19. 1A-8285 [6] NUT  
20. 7H-3641 [6] ROD END  
21. 1B-2790 C [2] BOLT  
22. 1D-4716 [6] NUT  
  3B-4505 [6] LOCKWASHER  
23. 6S-9016 C [1] LEVER  
24. 6S-3879 [1] ROD  
25. 1B-7182 [2] BOLT  
26. 6S-3892 [1] SHAFT ASSEM.  
27. 2M-8908 [1] KNOB  
28. 6S-6912 [1] LEVER ASSEM.  
29. 1D-5117 [2] NUT  
30. 4D-4971 [1] SPRING  
31. 6S-6915 [1] ROD  
  3B-4607 [2] COTTER PIN  
  4B-4276 [4] WASHER  
32. 6S-3848 [1] SHAFT  
33. 6S-9031 C [1] BLOCK ASSEM.  
    (Includes)
  4H-2610 [1] BEARING  
34. 6S-9021 C [1] LEVER ASSEM.  
    (Includes)
35. 9H-2400 [2] BEARING  
36. 6H-3956 [3] PIN  
37. 1H-5514 C [2] BOLT  
38. 5K-3546 C [1] PLUG  
  C   INDICATES CHANGE
 

#SEBP11910077
 

9P-3433: CONTROL GP-TMSN OIL SYSTEM

9P3433 TRANSMISSION LUBRICATION SYSTEM CONTROL GROUP
Part of 9P3459 Transmission Arrangement shown on Page 53
1P571 Valve and 9P2653 Pump parts are shown on Pages 61 & 62
c217413 SEBP1191
9P3433 CONTROL GP-TMSN OIL SYSTEM Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3603 [1] COVER ASSEM.  
    (Includes)
2. [1] WASHER  
3. 7B-3028 [2] SCREW  
4. 6P-5341 [1] LEVER ASSEM.  
5. 6H-3956 [1] PIN  
6. 6P-9210 LEVER ASSEM.  
    (Includes)
7. 4S-6525 [1] DOWEL  
8. [1] VALVE ASSEM.  
9. 6L-4783 [3] BOLT  
10. 9M-1974 [7] WASHER  
11. 9P-2653 Y [1] PUMP GROUP  
    (Separate Illustration)
12. 2S-4663 [1] SEAL  
13. 2P-3619 [1] TUBE ASSEM.  
14. 8M-5254 [1] SEAL  
15. 3H-5932 [4] BOLT  
16. 4H-1788 [1] RING  
17. 6F-5559 [2] SEAL  
18. 9S-8771 [1] SLEEVE  
19. 1P-0571 Y [1] VALVE GROUP  
    (Separate Illustration)
20. 2H-3934 [1] SEAL  
21. 0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
22. 6P-1407 [1] SCREEN  
23. 4H-1723 [1] SEAL  
24. 9P-9520 [1] SWITCH ASSEM.  
25. 3J-1907 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP11910078
 

1P-0571: VALVE GP

1P571 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Part of 9P3433 Transmission Lubrication System Control Group shown on Page 60
c217414 SEBP1191
1P0571 VALVE GP Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8410 [1] SPRING  
2. 1B-7182 [5] BOLT  
3. 9M-1974 [8] WASHER  
4. 1P-0615 [1] COVER  
5. 9S-8770 [1] GASKET  
6. 9S-8764 [1] SPOOL  
7. 1P-0641 [1] BODY ASSEM.  
  1P-2298 [1] VALVE ASSEM.  
8. 8M-8790 [1] DOWEL  
9. 3P-9194 C [1] PLUG  
10. 5M-2894 [1] WASHER  
11. 2P-3588 [1] SPRING (Inner)  
12. 2P-3587 [1] SPRING (Outer)  
13. 1P-9620 [1] RING  
14. 5M-3492 [1] SHIM 2.60 cm(.010 in.) thick  
  7M-1397 [1] SHIM 9.20 cm(.036 in.) thick  
  7M-1396 [1] SHIM 15.80 cm(.062 in.) thick  
15. 2P-3604 [1] SPOOL ASSEM.  
16. 5M-8009 [1] PIN  
17. 3D-4603 [1] PLUG  
18. 2M-1168 [1] SLUG  
19. 1P-0625 [1] GASKET  
20. 5M-6214 [4] PLUG  
21. 3P-4040 [1] COVER  
22. 2B-2695 C [3] BOLT  
23. 9S-8762 [1] SPOOL ASSEM.  
24. 3F-6808 [1] DOWEL  
25. 7S-4607 [2] DETENT ASSEM.  
26. 6H-3956 [2] PIN  
27. 2S-1022 [1] PLUNGER  
  C   INDICATES CHANGE
 

#SEBP11910079
 

9P-2653: PUMP GP-GEAR

9P2653 TRANSMISSION PUMP GROUP
Part of 9P3433 Transmission Lubrication System Control Group shown on Page 60
c216666 SEBP1191
9P2653 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 931 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2925 [1] COVER ASSEM.  
2. 4F-2099 [2] PIN  
3. 1P-4170 [2] BEARING  
4. 9P-3462 [1] BODY ASSEM.  
5. 4F-2099 [1] PIN  
6. 1P-4170 [2] BEARING  
7. 9P-3463 [1] GEAR (10 Teeth)  
8. 6L-4783 [4] BOLT  
  9M-1974 [4] WASHER  
9. 9P-3464 [1] GEAR (10 Teeth)  
10. 1P-4166 [1] GEAR (32 Teeth)  
 

Information:

Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Engine Supports
3204 VEHICULAR ENGINE
Oil Pump For The Transmission<BR> (1P4165)
931 TRACK-TYPE LOADER POWER TRAIN
Transmission<BR> (2P2945)
931 TRACK-TYPE LOADER POWER TRAIN
Control Linkage For Transmission
931 TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Bearing Bores in Hydrostatic Transmission Cases{3030, 3064, 3064, 7551}
Bearing Bores in Hydrostatic Transmission Cases{3030, 3064, 3064, 7551}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Engine, Torque Converter And Transmission
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Torque Converter And Transmission
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Transmission Oil Pump And Control Valve
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Transmission Control Valve
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Transmission Oil Pump
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Torque Converter, Transmission And Transfer Gears
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Torque Converter And Transmission
D3 & 931 TRACTOR AND LOADER POWER TRAIN AND VEHICLE SYSTEMS
Service Magazine
Improved Neutral-Start Switch Assembly Used In Transmission Oil System Control Group And Back-Up Warning Group{1424,3154,7406}
1980/11/17
Sleeve Can Be Installed For Repair Of Loose Transmission Suction Tube{3153,3154}
1981/03/30
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Several Improvements Have Been Made To The Neutral-Start Switch Assembly In The Control Group For Transmission Lubrication System{3150,3167,3168,1424}
1977/12/19
Softer Hose Connection In Transmission Filler Pipe Prevents Floor Plate Vibration{3150,3184,7253}
1978/06/19
Improvement Made To Transmission Control Linkage To Give Easier Shifts{3156}
1978/08/07
Improvements To Transmission Control Linkage{3156}
1978/09/18
Clean The Orifice In The Pressure Control Group During A Transmission Overhaul{3167}
1979/04/16
New Test Cover Available For Optional Transmission{0651}
1979/07/02
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 931 :

TRANSMISSION OIL FILLER GROUP
6S-3533 TRANSMISSION OIL FILLER GROUP
LIGHTING SYSTEM
6S-3549 LIGHTING SYSTEM
LIGHTING SYSTEM
6S-3612 LIGHTING SYSTEM
BACKUP WARNING GROUP
6S-8715 BACKUP WARNING GROUP
CAB WIRING GROUP
6S-8561 CAB WIRING GROUP
BATTERY GP
6S-3548 BATTERY GP
WIRING HARNESS ASSEMBLY
6S-9206 WIRING HARNESS ASSEMBLY
WIRING HARNESS ASSEMBLY
5G-1104 WIRING HARNESS ASSEMBLY
PLANETARY GP
2P-2945 PLANETARY GP
2P-2945 PLANETARY GP
TRANSFER GEAR GROUP
2P-2946 TRANSFER GEAR GROUP
2P-2946 TRANSFER GEAR GROUP
TORQUE CONVERTER GP
1T-1040 TORQUE CONVERTER GP
TRANSMISSION CONTROL GROUP
6S-3535 TRANSMISSION CONTROL GROUP
CONTROL GP-TMSN OIL SYSTEM
9P-3433 CONTROL GP-TMSN OIL SYSTEM
VALVE GP
1P-0571 VALVE GP

Truck sale:

CATERPILLAR 931 1976
 
CATERPILLAR 931 1976
- TRACK LOADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CAT 931
 
CAT 931

Spencer Auction Company
 
USD $10,000 
1978 CAT 931

Ziegler Cat
Marshall, Minnesota
 
 
CAT 931

EURO AUCTIONS
United Kingdom
CAT 931
USD $8,500 
CAT 931

Harp Heavy Equipment
Fayetteville, Georgia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.