AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D10 TRACTOR 76X00001-00358 (MACHINE) POWERED BY D348 ENGINE BASIC ENGINE Caterpillar SIS



TRACK-TYPE TRACTOR D10 TRACK-TYPE TRACTOR 76X
 D10 TRACTOR 76X00001-00358 (MACHINE) POWERED BY D348 ENGINE SEBP1197 D10 76X   (1978)

Parts group D10:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GROUP
6N-5901 CAMSHAFT GROUP
6N5901 CAMSHAFT GROUP
CAMSHAFT HOUSING GROUP
6N-5749 CAMSHAFT HOUSING GROUP
6N5749 CAMSHAFT HOUSING GROUP
CRANKSHAFT GP
CRANKSHAFT GROUP
4N-6818 CRANKSHAFT GROUP
4N6818 CRANKSHAFT GROUP
Engine Serial No. 98S1 to 98S1191 inclusive
CRANKSHAFT GROUP
4N-6818 CRANKSHAFT GROUP
4N6818 CRANKSHAFT GROUP
Engine Serial No. 98S1192-Up
CRANKSHAFT SEAL GROUP
7N-4105 CRANKSHAFT SEAL GROUP
7N4105 CRANKSHAFT SEAL GROUP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER BLOCK GP
CYLINDER BLOCK GROUP
4N-9200 CYLINDER BLOCK GROUP
4N9200 CYLINDER BLOCK GROUP
6N7329 Block parts are shown on Page 7
CYLINDER BLOCK ASSEMBLY
6N-7329 CYLINDER BLOCK ASSEMBLY
6N7329 CYLINDER BLOCK ASSEMBLY
Part of 4N9200 Cylinder Block Group shown on Page 6
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER HEAD GP
CYLINDER HEAD GROUP
2S-0711 CYLINDER HEAD GROUP
2S711 CYLINDER HEAD GROUP
Engine Serial No. 98S1 to 98S761 inclusive
CYLINDER HEAD GROUP
7N-9551 CYLINDER HEAD GROUP
7N9551 CYLINDER HEAD GROUP
Engine Serial No. 98S762-Up
DAMPER GP
DAMPER GROUP
4N-9747 DAMPER GROUP
4N9747 DAMPER GROUP
Engine Serial No. 98S1 to 98S973 inclusive
DAMPER GROUP
4N-9747 DAMPER GROUP
4N9747 DAMPER GROUP
Engine Serial No. 98S974-Up
DRIVE GP-ACCESSORY
ACCESSORY DRIVE GROUP
4N-9203 ACCESSORY DRIVE GROUP
4N9203 ACCESSORY DRIVE GROUP
FLANGE GROUP
7G-0051 FLANGE GROUP
7G51 FLANGE GROUP
--Accessory Drive
FLYWHEEL GP
REAR GEAR GROUP
4N-9204 REAR GEAR GROUP
4N9204 REAR GEAR GROUP
FLYWHEEL GROUP
4N-9205 FLYWHEEL GROUP
4N9205 FLYWHEEL GROUP
GEAR GP
FRONT GEAR GROUP
4N-9198 FRONT GEAR GROUP
4N9198 FRONT GEAR GROUP
REAR GEAR GROUP
4N-9204 REAR GEAR GROUP
4N9204 REAR GEAR GROUP
HOUSING GP-FLYWHEEL
FLYWHEEL HOUSING GROUP
4N-9206 FLYWHEEL HOUSING GROUP
4N9206 FLYWHEEL HOUSING GROUP--Part 1 of 2
FLYWHEEL HOUSING GROUP
4N-9206 FLYWHEEL HOUSING GROUP
4N9206 FLYWHEEL HOUSING GROUP-Part 2 of 2
HOUSING GP-FRONT
FRONT HOUSING GROUP
4N-9207 FRONT HOUSING GROUP
4N9207 FRONT HOUSING GROUP
Engine Serial No. 98S1 to 92S1479 inclusive
FRONT HOUSING GROUP
4N-9207 FRONT HOUSING GROUP
4N9207 FRONT HOUSING GROUP
Engine Serial No. 98S1480-Up
FRONT GEAR GROUP
4N-9198 FRONT GEAR GROUP
4N9198 FRONT GEAR GROUP
MOUNTING GP-ENGINE
ENGINE TRUNNION GROUP
4N-7081 ENGINE TRUNNION GROUP
4N7081 ENGINE TRUNNION GROUP
PAN GP-OIL
OIL PAN GROUP
4N-9201 OIL PAN GROUP
4N9201 OIL PAN GROUP
Engine Serial No. 98S1 to 98S1130 inclusive
OIL PAN GROUP
4N-9201 OIL PAN GROUP
4N9201 OIL PAN GROUP
Engine Serial No. 98S1131-Up
OIL PAN DRAIN ADAPTER GROUP
6N-9797 OIL PAN DRAIN ADAPTER GROUP
6N9797 OIL PAN DRAIN ADAPTER GROUP
Serial No. 76X1 to 76X349 inclusive and 84W1 to 84W457 inclusive
PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
4N-8952 CONNECTING ROD AND PISTON GROUP
4N8952 CONNECTING ROD AND PISTON GROUP
--6 required
Engine Serial No. 98S1 to 98S989 inclusive
CONNECTING ROD AND PISTON GROUP
8N-3077 CONNECTING ROD AND PISTON GROUP
8N3077 CONNECTING ROD AND PISTON GROUP
--6 Required
Engine Serial No. 98S990 to 98S1250 inclusive
CONNECTING ROD AND PISTON GROUP
4N-8952 CONNECTING ROD AND PISTON GROUP
4N8952 CONNECTING ROD AND PISTON GROUP
--6 Required
Engine Serial No. 98S1251-Up
VALVE MECHANISM GP
VALVE MECHANISM GROUP
4N-7460 VALVE MECHANISM GROUP
4N7460 VALVE MECHANISM GROUP
VALVE MECHANISM COVER GROUP
7N-4031 VALVE MECHANISM COVER GROUP
7N4031 VALVE MECHANISM COVER GROUP

Information:

(For parts list, see above)

Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
V-Belt Tension Chart
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Camshafts
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Disassembly and Assembly
Camshaft Housing (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Camshaft Housing (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Camshaft Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Special Instruction
Rod And Main Bearing Replacement In-Chassis{1230}
Rod And Main Bearing Replacement In-Chassis{1230}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Bearing Surface (Journal) For Connecting Rods
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Bearing Surface (Journal) For Main Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Vibration Damper And Hub
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft Front Seal And Wear Sleeve
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft Main Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft Rear Seal Ring And Thrower
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rear Crankshaft Gear
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
FT1576 Puller Plate Used For Removal Of Crankshaft Gear; Drawings For FT1576 Puller Plate Can Be Used For Modification Of Existing Puller Plate{0621,1204,1202}
1981/01/19
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
New Crankshaft Rear Seal Ring Has Improved Design{1161}
1982/04/19
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1982/07/19
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Engine Bearings May Be Replaced Without Removing The Engine From Its Chassis{1230}
1984/11/05
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Check New 1W7578 And Remanufactured OR2530 Crankshafts For Burr On Thrust Face {1202,1203}
1990/05/21
Grinder Burns On Crankshaft Sidewalls{1202}
1990/06/18
New Crankshaft Seal Groups Used{1160,1161,1202}
1990/11/05
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Modification of the 7E2679 Block Group{1000}
Modification of the 7E2679 Block Group{1000}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Liner
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Liner Projection
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Bearing Surface (Journal) For Main Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Main Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Crankshaft Main Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Spacer Plates (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Spacer Plates (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Liners
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Engine Cylinder Liner Available{1216}
1996/01/15
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CFEL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CSARL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Americas
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Valves
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Head
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Service Letter-APD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Disassembly and Assembly
Precombustion Chambers
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Covers (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Covers (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Heads (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Heads (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valves
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Guides
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Seat Inserts
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Water Directors
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Water Seals Used In Cylinder Head Groups{1115,1101}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Precombustion Chamber Seal Available{1106,1100}
1985/09/02
Torque Increase For Cylinder Head Bolts{1101}
1985/09/30
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/08/18
Silicone Water Seal Available{1101}
1986/08/18
Longer Adjusting Screw And Jamnut Available For Use In Valve Rocker Arms{1123,1105}
1986/09/22
Use Heli-Coils To Repair 5.4" Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Exhaust Valve Has Improved Three-Piece Construction{1105}
1979/04/09
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
How to Prevent Exhaust Valve Failures on D348 Engines{1105}
1989/10/23
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves {1105}
1990/05/28
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Machine Engines {1100}
2012/05/08
Specifications
Vibration Damper
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Disassembly and Assembly
Vibration Damper And Hub
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Accessory Drive Gear
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Universal Joint Group For Accessory Drive Has Grease Fittings For Bearings; Individual Parts Serviced{1207}
1984/05/07
New Accessory Drive Oil Seal Is Available{1207}
1984/07/16
Specifications
Accessory Drive Gear
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Universal Joint Group For Accessory Drive Has Grease Fittings For Bearings; Individual Parts Serviced{1207}
1984/05/07
New Accessory Drive Oil Seal Is Available{1207}
1984/07/16
Special Instruction
Installation Of Fan Drive Motor Conversion Group{1359}
Installation Of Fan Drive Motor Conversion Group{1359}
Disassembly and Assembly
Fan Drive Pump
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Fan Drive Motor
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Shorter Mounting Bolts Used For Oil Supply Tanks In Power Train And Hydraulic Fan Drive Oil Systems{1350,1359,3004,3154,3177,5056,5057}
1980/08/11
Filter Added To Drain Hole In Water Pumps{1361}
1985/11/18
New Coolant Flow Switch Group Has Improved Design To Provide Extended Service Life {1361,7422,7470}
1990/05/28
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Specifications
Flywheel
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Runout
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Housing Runout
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Housing Bore
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Disassembly and Assembly
Flywheel
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rear Crankshaft Gear
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Timing Gears
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Disassembly and Assembly
Variable Timing Unit
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Front Timing Gear Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Front Timing Gears & Plate
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rear Timing Gears And Plate
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rear Crankshaft Gear
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Housing Runout
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Housing Bore
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Disassembly and Assembly
Flywheel Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft Rear Seal Ring And Thrower
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
New Crankshaft Rear Seal Ring Has Improved Design{1161}
1982/04/19
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Front Timing Gear Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Front Timing Gears & Plate
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rear Timing Gears And Plate
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Fan Drive Motor Conversion Group{1359}
Installation Of Fan Drive Motor Conversion Group{1359}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Timing Gears
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Accessory Drive Gear
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Camshafts
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rocker Arms
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Pistons And Rings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Pistons And Rings (With Keystone Piston Ring Groove)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
V-Belt Tension Chart
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Disassembly and Assembly
Fan Drive Pump
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Fan Drive Motor
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Variable Timing Unit
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Vibration Damper And Hub
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft Front Seal And Wear Sleeve
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Front Timing Gear Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Front Timing Gears & Plate
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft Main Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Covers (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Covers (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Camshaft Housing (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Camshaft Housing (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Camshaft Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Heads (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Cylinder Heads (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Guides
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Seat Inserts
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Water Directors
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Pistons
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Flywheel Housing
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rear Timing Gears And Plate
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft Rear Seal Ring And Thrower
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Crankshaft
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Rear Crankshaft Gear
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Vandalism Guard Group Now Used For Fuel Tank Drain{7315,7150,1279,1273}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Universal Joint Group For Accessory Drive Has Grease Fittings For Bearings; Individual Parts Serviced{1207}
1984/05/07
New Accessory Drive Oil Seal Is Available{1207}
1984/07/16
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Additional Bearings Are Now Used In The Engine Support Group{1152}
1985/09/23
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Filter Added To Drain Hole In Water Pumps{1361}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Longer Adjusting Screw And Jamnut Available For Use In Valve Rocker Arms{1123,1105}
1986/09/22
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Use Heli-Coils To Repair 5.4" Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
New Oil Pump Has Improved Relief Valve For Better Pressure Control{1304}
1979/05/07
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Crankshaft Seal Groups Used{1160,1161,1202}
1990/11/05
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Technical Information Bulletin
Trunnion Bearings May Be Assembled Incorrectly
Trunnion Bearings May Be Assembled Incorrectly
Service Magazine
New, Stronger Front Support Assembly Used To Hold Fender{7252,7051}
1980/09/15
Additional Bearings Are Now Used In The Engine Support Group{1152}
1985/09/23
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
Correct Maintenance Can Help Prevent Oil Pan Cracking{1302,7151}
1984/05/21
New Engine Oil Level Gauge Assembly Has A Tighter Fit {1302}
1984/06/25
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Pistons And Rings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Pistons And Rings (With Keystone Piston Ring Groove)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Connecting Rods
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Bearing Surface (Journal) For Connecting Rods
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Connecting Rod Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Disassembly and Assembly
Connecting Rod Bearings
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Pistons
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Use Correct Specifications To Check Piston Ring Gaps{1215}
1981/05/25
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Engine Bearings May Be Replaced Without Removing The Engine From Its Chassis{1230}
1984/11/05
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Vandalism Guard Group Now Used For Fuel Tank Drain{7315,7150,1279,1273}
1982/09/20
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Installation Of Fan Drive Motor Conversion Group{1359}
Installation Of Fan Drive Motor Conversion Group{1359}
Disassembly and Assembly
Vibration Damper And Hub
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Shorter Mounting Bolts Used For Oil Supply Tanks In Power Train And Hydraulic Fan Drive Oil Systems{1350,1359,3004,3154,3177,5056,5057}
1980/08/11
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Engine Bearings May Be Replaced Without Removing The Engine From Its Chassis{1230}
1984/11/05
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Valve Cover Seal May Have an Interference Causing an Oil Leak on Certain D10 and D11 Track-Type Tractors{1107, 1120, 1408}
Valve Cover Seal May Have an Interference Causing an Oil Leak on Certain D10 and D11 Track-Type Tractors{1107, 1120, 1408}
Specifications
Rocker Arms
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valves
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Disassembly and Assembly
Valve Covers (Earlier)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Valve Covers (Later)
D348 VEHICULAR ENGINE FOR D10 TRACTOR
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Longer Adjusting Screw And Jamnut Available For Use In Valve Rocker Arms{1123,1105}
1986/09/22
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines {1123}
1988/12/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Caterpillar D100, Construction
24,000 
Caterpillar D100, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
Call 
CAT D10

Ace Rental & Repair
 
Call 
CAT D10

Ace Rental & Repair
 
 
CAT D10

RD Williams Parts
 
 
CAT D10

RD Williams Parts
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.