AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CRANKSHAFT SERVICE THRUST PLATE-FIELD INSTALLATION PROVIDES A THRUST PLATE TO BE USED IN THE EVENT A "WIDE" THRUST JOURNAL CRANKSHAFT IS INSTALLED IN A SPACER PLATE CYLINDER BLOCK 3306


BASIC ENGINE
CRANKSHAFT GP
PISTON & ROD GP
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 23C
 3306 INDUSTRIAL ENGINE 23C01266-02001 SEBP1201 3306 23C   (1968)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
CRANKSHAFT SERVICE THRUST PLATE-FIELD INSTALLATION
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
HUB GP-CRANKSHAFT
4N-8165 HUB GP-CRANKSHAFT
 

#SEBP12010020
 

CRANKSHAFT SERVICE THRUST PLATE-FIELD INSTALLATION

CRANKSHAFT SERVICE THRUST PLATE-FIELD INSTALLATION
PROVIDES A THRUST PLATE TO BE USED IN THE EVENT A "WIDE" THRUST JOURNAL
CRANKSHAFT IS INSTALLED IN A SPACER PLATE CYLINDER BLOCK
SEBP12010020 SEBP1201
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7N-9343 [1] THRUST PLATE  
   
    FORM SMHS7060
 

#SEBP12010021
 

6N-8079: CRANKSHAFT GP

6N8079 CRANKSHAFT GP
S/N 23C1430-UP
FOR FIELD REPLACEMENT OF 4N7697 ORDER 4N7693-PAGE 20
c496454 SEBP1201
6N8079 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9342 [2] PLATE-THRUST  
2. 4N-7697 [1] CRANKSHAFT AS  
3. 9F-2247 [6] PLUG  
4. 4W-5738 C [7] BEARING-MAIN (STANDARD)  
  8N-8225 AJ [7] BEARING-MAIN (.25MM US)  
  8N-8226 AJ [7] BEARING-MAIN (.51MM US)  
  8N-8227 AJ [7] BEARING-MAIN (.76MM US)  
  8N-8228 AJ [7] BEARING-MAIN (.51MM OS)  
  8N-8229 AJ [7] BEARING-MAIN  
    (.25MM US .51MM OS)
   
    J-USE AS REQUIRED
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12010022
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP12010022 SEBP1201
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
   
   
    CYLINDER BLOCK NOT REBORED
    CRANKSHAFT GROUND FOR UNDERSIZE
    MAIN BEARING I.D.OF
   
  4S-8881 [7] .25MM  
  4S-8883 [7] .51MM  
  4S-8885 [7] .77MM  
   
    CYLINDER BLOCK REBORED (.51 MM)
    (BEARING OVERSIZE O.D.)
    CRANKSHAFT GROUND FOR UNDERSIZE
    MAIN BEARING I.D. OF
  6N-3823 [7] (STANDARD)  
  6N-3822 [7] .25 MM  
  6N-4129 [1] THRUST PLATE GP  
 

#SEBP12010023
 

2P-6224: SEAL GP-CRANKSHAFT

2P6224 CRANKSHAFT SEAL GP
c709065 SEBP1201
2P6224 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0452 C [1] SEAL GP-CRANKSHAFT  
2. 9Y-9895 [1] SEAL GP-CRANKSHAFT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12010024
 

4N-4028: PISTON & ROD GP

4N4028 CONNECTING ROD AND PISTON GP
S/N 23C1266-1555
c222700 SEBP1201
4N4028 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9804 C [1] PIN-PISTON  
2. 9H-4015 [2] RETAINER-PIN  
3. 6N-8061 C [1] ROD AS-CONNECTION  
  7S-9347 [1] BEARING  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
5. 7M-7821 [1] BEARING-CONNECTING ROD (STANDARD)  
  2S-0502 [1] BEARING-.254MM US (.010IN)UNDERSIZE  
  2S-0503 [1] BEARING-.508MM US (.020IN)UNDERSIZE  
  7M-7826 [1] BEARING-.762MM US (.030IN)UNDERSIZE  
6. 8N-3181 C [1] PISTON GP  
7. 9S-7788 [1] RING-PISTON (OIL)  
8. 5S-6750 [1] RING-INTERMEDIATE  
9. 7S-8378 [1] RING-PISTON TOP  
  7S-9404 [1] RING GP-PISTON  
    (INCL COMPLETE SET
    OF RINGS FOR ONE
    PISTON)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12010025
 

2P-6202: CAMSHAFT GP

2P6202 CAMSHAFT GP
c500722 SEBP1201
2P6202 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2942 CR [1] CAMSHAFT AS  
2. 7S-2204 [1] WASHER-THRUST  
3. 8S-1491 [1] LOCK  
4. 0S-0509 [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12010026
 

4N-4028: PISTON & ROD GP

4N4028 CONNECTING ROD AND PISTON GP
S/N 23C1556-UP
c690291 SEBP1201
4N4028 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9804 [1] PIN-PISTON  
2. 9H-4015 [2] RETAINER-PIN  
3. 8N-1984 RC [1] ROD AS-CONNECTING  
  8N-1985 [1] BEARING-CONNECTING ROD  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT  
5. 4W-5739 C [1] BEARING-CONNECTING ROD (STANDARD)  
  8N-8221 CA [1] BEARING-CONNECTING ROD (.254MM UNDERSIZE)  
  8N-8222 CA [1] BEARING-CONNECTING ROD (.508MM UNDERSIZE)  
  8N-8223 CA [1] BEARING-CONNECTING ROD (.762MM UNDERSIZE)  
6. 8N-3181 [1] PISTON GP  
7. 9S-7788 [1] RING-PISTON (OIL)  
8. 5S-6750 [1] RING-PISTON (INTERMEDIATE)  
9. 7S-8378 [1] RING-PISTON (TOP)  
  7S-9404 [1] RING GP-PISTON  
    (CONSISTS OF COMPLETE
    SET OF RINGS FOR ONE
    PISTON)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12010027
 

1W-2467: PISTON & ROD GP

1W2467 CONNECTING ROD AND PISTON GP-21:1 RATIO
HIGH COMPRESSION RATIO FOR 4000 FEET ALTITUDE AND ABOVE
c518904 SEBP1201
1W2467 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9804 [1] PIN-PISTON  
2. 9H-4015 [2] RETAINER-PIN  
3. 8N-1984 R [1] ROD AS-CONNECTION  
  8N-1985 [1] BEARING-CONNECTING ROD  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
5. 4W-5739 [1] BEARING-CONNECTING ROD  
  8N-8221 A [1] BEARING-CONNECTING ROD .254MM(.01IN)UNDER SIZE  
  8N-8222 A [1] BEARING-CONNECTING ROD .508MM(.02IN)UNDER SIZE  
  8N-8223 A [1] BEARING-CONNECTING ROD .762MM9.03IN)UNDER SIZE  
6. 8N-3185 [1] PISTON GP  
  8N-3184 [1] BODY AS-PISTON  
7. 9S-7788 [1] RING-PISTON  
8. 5S-6750 [1] RING-INTERMEDIATE  
9. 9S-3029 [1] RING-PISTON TOP  
   
   
  9S-3068 [1] RING GP CONSISTS OF COMPLETE SET  
    OF RINGS FOR ONE PISTON
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12010028
 

2P-6486: CYLINDER HEAD GP

2P6486 CYLINDER HEAD GP
S/N 23C1266-1408
6N8889-PAGE 28
c215310 SEBP1201
2P6486 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-8889 YC [1] HEAD ASSEM.  
    (Separate Illustration)
2. 5S-6452 [6] VALVE (intake)  
3. 5S-7232 [6] VALVE (exhaust)  
4. 7S-7144 [12] SPRING  
5. 2A-4429 [24] LOCK  
6. 5S-5874 [12] ROTOCOIL  
7. 8S-3970 [6] CHAMBER ASSEM.  
  7S-3206 [6] SEAL  
  5M-2667 C [6] GASKET 4.93 mm(.194 in.) thick  
  2S-8959 C [6] GASKET 5.66 mm(.223 in.) thick  
  2S-8960 C [6] GASKET 6.3 mm(.248 in.) thick  
8. 5S-6281 C [1] GASKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12010029
 

2P-6486: CYLINDER HEAD GP

2P6486 CYLINDER HEAD GP
S/N 23C1409-1429
c714365 SEBP1201
2P6486 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 [12] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
3. 2A-4429 [24] LOCK-RETAINER  
4. 6N-8120 C [1] CYLINDER HEAD AS  
5. 0S-1594 [4] BOLT  
6. 5M-2894 [4] WASHER  
7. 1P-6367 [1] COVER  
8. 5S-6735 [1] GASKET  
9. 3B-0623 [6] PLUG-CUP  
10. 3S-8313 [7] PLUG-CUP  
11. 1S-3062 [18] DIRECTOR-WATER  
12. 8T-6762 [3] PLUG-PIPE  
13. 7N-4448 [6] INSERT (INTAKE)  
14. 5S-7221 [6] INSERT (EXHAUST)  
15. 116-7553 [12] GUIDE-VALVE  
16. 5M-2667 B [6] GASKET-CHAMBER (4.93MM(.194IN)THK)  
  2S-8959 B [6] GASKET-CHAMBER (5.66MM(.223IN)THK)  
  2S-8960 B [6] GASKET-CHAMBER (6.3MM(.248IN)THK)  
17. 7S-3206 [6] SEAL-O-RING  
18. 8S-3970 [6] CHAMBER AS  
19. 111-8015 C [1] GASKET AS-CYLINDER HEAD  
20. 5S-6452 [6] VALVE-INLET  
21. 5S-7232 [6] VALVE-EXHAUST  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/03/12
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Crankshaft Assemblies
1982/11/10
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Group Used
1984/07/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
A New Type of Main Bearing is Available {1203}
2004/10/01
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Main Bearings
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Connecting Rods
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Hub And Damper
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley And Hub
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal Wear Sleeve
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Drive Gear
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal Wear Sleeve
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Drive Gear
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Crankshaft
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 3306 :

CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
8N-6273 KIT-BLOCK HARDWARE
COVER GP-CYLINDER BLOCK
2P-6517 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
6N-8124 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7N-6550 CYLINDER BLOCK AS
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
PISTON & ROD GP
4N-4028 PISTON & ROD GP
CAMSHAFT GP
2P-6202 CAMSHAFT GP
PISTON & ROD GP
4N-4028 PISTON & ROD GP
PISTON & ROD GP
1W-2467 PISTON & ROD GP
CYLINDER HEAD GP
2P-6486 CYLINDER HEAD GP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.