OPERATOR STATION
PANEL GPFUEL SYSTEM
DRIVE GP-TACHOMETERBASIC ENGINE
DRIVE GP-AUXILIARYCLUTCH GP
DRIVE GP-AUXILIARY
DRIVE GP-PUMP
OPERATOR STATION
PANEL GP#SEBP12010510
8M-7892: GAUGE AS-AMMETER
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-3507 | [1] | SEAL-RECTANGULAR |
#SEBP12010511
4N-5675: DRIVE GP-TACHOMETER
#SEBP12010512
4N-1402: DRIVE GP-TACHOMETER
#SEBP12010513
3N-2081: DRIVE GP-AUXILIARY
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3776 | [1] | LOCKNUT (1.173X18 THD) | |
| 2. | 2H-3779 | [1] | LOCK | |
| 3. | 7N-5848 | [1] | GEAR (40 TEETH) | |
| 4. | 5F-3106 | [1] | SEAL-O-RING (126.59MM ID) | |
| 5. | 1W-6254 | [1] | ADAPTER-AUXILIARY DRIVE | |
| 6. | 2H-3910 | [1] | SEAL-LIP | |
| 7. | 8H-9789 | [2] | BALL BEARING | |
| 8. | 2H-5549 | [2] | RING-RETAINING | |
| 9. | 0S-1617 | [6] | BOLT (5/16-18X.75IN) | |
| 10. | 6L-5274 | [1] | PULLEY-AUXILIARY DRIVE | |
| 11. | 8L-4949 | [1] | SPACER-BEARING | |
| 12. | 8L-4889 | [1] | SHAFT-AUXILIARY DRIVE |
#SEBP12010514
6L-6468: CLUTCH GP-POWER TAKE-OFF
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP12010515
1W-6298: DRIVE GP-AUXILIARY
1W6298 AUXILIARY DRIVE GP
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3776 | [1] | LOCKNUT | |
| 2H-3779 | [1] | LOCK | ||
| 2. | 8L-4889 | [1] | SHAFT-AUXILIARY DRIVE | |
| 3. | 7N-5848 | [1] | GEAR (40 TEETH) | |
| 4. | 5F-3106 | [1] | SEAL-O-RING | |
| 5. | 1W-6254 | [1] | ADAPTER-AUXILIARY DRIVE | |
| 6. | 2H-3910 | [1] | SEAL-LIP TYPE | |
| 7. | 8H-9789 | [2] | BALL BEARING | |
| 8. | 2H-5549 | [2] | RING-RETAINING | |
| 9. | 0S-1617 | [6] | BOLT | |
| 10. | 6L-5274 | [1] | PULLEY-AUXILIARY DRIVE | |
| 11. | 8L-4949 | [1] | SPACER-BEARING |
#SEBP12010516
3N-4120: MOUNTING GP-HYD PUMP DRIVE
3N4120 MOUNTING GP-HYDRAULIC PUMP DRIVE
PROVIDES CUSTOMER INSTALLED HYDRAULIC PUMP DRIVE WITH CUT-OFF CLUTCH ON
FRONT ON ENGINE. CLUTCH MUST BE SAE 8 INCH SINGLE PLATE, OVER CENTER,
WITH SAE NO. 5 HOUSING & NO. 305 PILOT BEARING
AN ATTACHMENT
PROVIDES CUSTOMER INSTALLED HYDRAULIC PUMP DRIVE WITH CUT-OFF CLUTCH ON
FRONT ON ENGINE. CLUTCH MUST BE SAE 8 INCH SINGLE PLATE, OVER CENTER,
WITH SAE NO. 5 HOUSING & NO. 305 PILOT BEARING
AN ATTACHMENT
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7L-5882 | [1] | PULLEY-COUPLING | |
| 2. | 0S-1571 | [6] | BOLT | |
| 3. | 5M-2894 | [7] | WASHER | |
| 4. | 0S-1594 | [8] | BOLT | |
| 5. | 7L-0603 | [1] | ADAPTER-FRONT POWER TAKE-OFF | |
| 6. | 7B-3235 C | [8] | BOLT | |
| 7. | 5P-8245 | [11] | WASHER | |
| 8. | 3N-4124 | [1] | SUPPORT AS (RH) | |
| 9. | 0L-1143 | [3] | BOLT | |
| 10. | 0S-1619 | [2] | BOLT | |
| 11. | 3N-4125 | [1] | SUPPORT AS (LH) | |
| 12. | 1D-4717 | [1] | NUT | |
| 13. | 0L-1352 | [2] | BOLT | |
| 14. | 0L-1329 | [3] | BOLT | |
| 15. | 3N-8231 | [1] | ADAPTER-DAMPER | |
| 16. | 2P-1692 | [1] | SEAL-O-RING | |
| 17. | 3N-1332 | [1] | HOUSING-ADAPTER | |
| 18. | 9Y-9895 | [1] | SEAL GP-CRANKSHAFT | |
| 19. | 3N-4126 | [1] | ADAPTER-SEAL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP12010517
8N-5488: DRIVE GP-PUMP
8N5488 DRIVE GP-HYDRAULIC PUMP
TYPE 1
ALLOWS STANDARD SAE B TYPE HYDRAULIC PUMP
TO BE DRIVEN OFF FRONT GEAR TRAIN
AN ATTACHMENT
TYPE 1
ALLOWS STANDARD SAE B TYPE HYDRAULIC PUMP
TO BE DRIVEN OFF FRONT GEAR TRAIN
AN ATTACHMENT
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-5491 | [1] | GEAR AS | |
| 2. | 5S-0907 | [1] | ORIFICE | |
| 3. | 5F-3106 | [1] | SEAL-O-RING | |
| 4. | 8N-5489 | [1] | BEARING | |
| 5. | 8N-5492 | [1] | RETAINER | |
| 6. | 3B-6552 | [1] | ELBOW | |
| 7. | 6N-3169 | [1] | HOSE AS .61M(24IN) | |
| 8. | 8M-2769 | [1] | CLIP | |
| 9. | 9M-4849 | [1] | SEAL-O-RING | |
| 10. | 8N-5739 | [1] | BRACKET | |
| 11. | 1C-2251 | [2] | BOLT | |
| 8D-5898 | [4] | SPACER | ||
| 12. | 0L-1351 | [1] | BOLT | |
| 1D-4717 | [1] | NUT | ||
| 9L-9132 | [1] | WASHER | ||
| 13. | 3B-7764 B | [1] | BUSHING | |
| 14. | 7J-8611 B | [1] | ELBOW | |
| 15. | 4S-6399 | [1] | CONNECTOR | |
| 16. | 8N-7318 | [1] | TUBE AS-INLET | |
| 17. | 5M-6213 | [1] | PLUG | |
| 18. | 2M-5407 | [1] | GASKET | |
| 19. | 3H-0120 | [1] | ELBOW | |
| 6K-6967 | [1] | ADAPTER-PIPE | ||
| 20. | 5P-5528 | [1] | ADAPTER-O-RING | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 21. | 1D-4586 | [2] | BOLT | |
| 5P-8247 | [2] | WASHER-HARD | ||
| 22. | 1D-4541 | [2] | BOLT | |
| 9M-1974 | [2] | WASHER | ||
| B | USE AS REQUIRED | |||
#SEBP12010518
8N-5488: DRIVE GP-PUMP
8N5488 DRIVE GP-PUMP
TYPE 2
ALLOWS STANDARD SAE B TYPE HYDRAULIC PUMP
TO BE DRIVEN OFF FRONT GEAR TRAIN
AN ATTACHMENT
TYPE 2
ALLOWS STANDARD SAE B TYPE HYDRAULIC PUMP
TO BE DRIVEN OFF FRONT GEAR TRAIN
AN ATTACHMENT
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-5491 | [1] | GEAR AS | |
| 2. | 5S-0907 | [1] | ORIFICE | |
| 3. | 5F-3106 | [1] | SEAL-O-RING | |
| 4. | 8N-5489 | [1] | BEARING | |
| 5. | 8N-5492 | [1] | RETAINER | |
| 6. | 030-7941 C | [1] | ELBOW | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 7. | 034-8348 C | [1] | HOSE AS .59M(23IN) | |
| 8. | 3B-7764 | [1] | BUSHING | |
| 9. | 6K-1972 C | [1] | ELBOW-FLARED | |
| 10. | 1D-4586 | [2] | BOLT | |
| 5P-8247 | [2] | WASHER-HARD | ||
| 11. | 1D-4541 | [2] | BOLT | |
| 9M-1974 | [2] | WASHER | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP12010519
1W-6192: DRIVE GP-PUMP
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-5491 | [1] | GEAR AS | |
| 2. | 5S-0907 | [1] | ORIFICE | |
| 3. | 5F-3106 | [1] | SEAL-O-RING | |
| 4. | 1W-6015 | [1] | BEARING ADAPTER | |
| 5. | 8N-5492 | [1] | RETAINER | |
| 6. | 030-7941 | [1] | ELBOW | |
| 7. | 034-8348 | [1] | HOSE AS .61M(24IN) | |
| 8. | 3B-7764 | [1] | BUSHING | |
| 9. | 6K-1972 | [1] | ELBOW-FLARED | |
| 10. | 3J-7354 | [1] | SEAL-O-RING | |
| 11. | 1D-4586 | [2] | BOLT | |
| 5P-8247 | [2] | WASHER-HARD | ||
| 12. | 1D-4541 | [2] | BOLT | |
| 9M-1974 | [2] | WASHER |
Information:
OPERATOR STATION
PANEL GP
Engine News
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01
1987/05/01
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of 7W4426 Tachometer Conversion Kit{7462}
Installation Of 7W4426 Tachometer Conversion Kit{7462}
Installation Of 7W4426 Tachometer Conversion Kit{7462}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
1979/01/29
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Caterpillar Parts SIS Catalog 3306 :
Truck sale:
9,775
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
35,500
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
- Stationary Generator Sets
RING POWER CORP.
8,185
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
41,500
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
35,000
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC


