AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9L-5345 TURBOCHARGER GP PART OF 9L-5802 TURBOCHARGER GP FIELD REPLACEMENT ORDER @@@@@ 8S-8039@@@@@ 1673C


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR

TRUCK ENGINE 1673C TRUCK ENGINE 76R
 3306 Truck Engine 76R02779-UP SEBP1202 1673C 76R   (1978)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
4N-9544 TURBOCHARGER GP
TURBOCHARGER GP
8S-8039 TURBOCHARGER GP
TURBOCHARGER GP
9L-5345 TURBOCHARGER GP
TURBOCHARGER GP
9L-5802 TURBOCHARGER GP
TURBOCHARGER GP
9N-1280 TURBOCHARGER GP
TURBOCHARGER GP
9N-1287 TURBOCHARGER GP
 

#SEBP12020250
 

9L-5345: TURBOCHARGER GP

9L-5345 TURBOCHARGER GP
PART OF 9L-5802 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 8S-8039@@@@@
i00435110 SEBP1202
9L5345 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-5166 [1] HOUSING AS-COMPRESSOR  
2. 3S-5126 [6] BOLT-HIGH TEMPERATURE (3/8-16X0.625-IN)  
3. 3S-5128 [3] PLATE-LOCK  
4. 8S-5165 [1] HOUSING  
5. 3S-5127 [3] PLATE-CLAMP  
6. 8S-8097 [1] PLATE-IDENTIFICATION  
  2F-0808 [2] SCREW (6X0.25-IN)  
7. 7N-7248 CY [1] CARTRIDGE GP-TURBOCHARGER  
8. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12020251
 

9L-5802: TURBOCHARGER GP

9L-5802 TURBOCHARGER GP
i00435213 SEBP1202
9L5802 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5345 Y [1] TURBOCHARGER GP  
2. 7L-3195 C [2] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
3. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
4. 1S-4295 [1] GASKET (TURBOCHARGER)  
5. 7L-6443 C [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
6. 5M-2894 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12020252
 

9N-1280: TURBOCHARGER GP

9N-1280 TURBOCHARGER GP
AN ATTACHMENT
i00436268 SEBP1202
9N1280 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3755 J [1] COVER-COMPRESSOR  
2. 9N-2378 C [1] WHEEL-COMPRESSOR  
3. 5S-4556 [1] INSERT  
4. 4N-9540 [1] HOUSING AS-CENTER  
  5S-5199 [1] PIN-GROOVED  
5. 5S-4554 H [1] SEAL-O-RING  
6. 5S-4558 J [1] CLAMP AS-COMPRESSOR  
  7M-9918 J [1] LOCKNUT (1/4-28-THD)  
7. 5S-4546 [1] RING-RETAINING (BEVELED)  
8. 5P-5757 CH [1] SEAL-O-RING  
9. 5S-4549 [1] DEFLECTOR-OIL  
10. 4N-7597 C [1] BEARING AS  
11. 5S-4517 J [1] CLAMP AS (TURBINE)  
  7M-9918 J [1] LOCKNUT (1/4-28-THD)  
12. 8S-9226 [1] HOUSING  
13. 8S-4989 [1] WHEEL AS  
14. 4M-8013 H [2] RING-PISTON  
15. 4M-6983 H [4] RING-RETAINING  
16. 5S-4551 H [1] SLEEVE-OIL CONTROL  
17. 1W-4795 J [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [2] SCREW-TAPPING (6-32X0.375-IN)  
18. 4N-9556 [1] SHROUD  
19. 5S-4557 [2] BEARING  
20. 4N-7609 C [2] RING-THRUST  
21. 5S-4547 [1] SLEEVE-SPACER  
22. 8S-9222 [1] SLEEVE  
23. 7N-0239 [1] NUT-TURBOCHARGER COMPRESSOR  
24. 7N-2856 CH [1] RING-SEAL  
  4N-9534 FJ [1] CARTRIDGE GP-TURBOCHARGER  
    (PARTS MARKED J ARE NOT INCLUDED)
   
    AVAILABLE REPAIR KIT(S):
  2W-0725 H [1] KIT-CARTRIDGE  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  H   KIT MARKED H INCLUDES PART(S) MARKED H
  J   PARTS MARKED J NOT INCLUDED IN GP. MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP12020253
 

9N-1287: TURBOCHARGER GP

9N-1287 TURBOCHARGER GP
S/N 76R6161-6985
PART OF 9N-1288 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 4N-9544@@@@@
i00436272 SEBP1202
9N1287 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9534 [1] CARTRIDGE GP-TURBOCHARGER  
  4N-9540 [1] HOUSING AS-CENTER  
  5S-5199 [1] PIN-GROOVED  
2. 4M-6983 [4] RING-RETAINING  
3. 4N-9556 [1] SHROUD  
4. 5S-4550 [2] RING-THRUST  
5. 8S-4989 [1] WHEEL AS  
6. 7N-2856 [1] RING-SEAL  
7. 5S-4551 [1] SLEEVE-OIL CONTROL  
8. 8H-3710 [2] SCREW-TAPPING (6-32X0.375-IN)  
9. 9S-1180 [1] PLATE-IDENTIFICATION  
10. 5S-4557 [2] BEARING  
11. 8S-9222 [1] SLEEVE  
12. 7N-0239 C [1] NUT-TURBOCHARGER COMPRESSOR  
13. 4M-8013 [2] RING-PISTON  
14. 5S-4556 [1] INSERT  
15. 9N-2378 [1] WHEEL-COMPRESSOR  
16. 5S-4549 [1] DEFLECTOR-OIL  
17. 5S-4546 [1] RING-RETAINING  
18. 5S-4554 [1] SEAL-O-RING  
19. 5P-5757 [1] SEAL-O-RING  
20. 8S-9223 [1] BEARING-THRUST  
  5S-4547 [1] SLEEVE-SPACER  
21. 4M-6990 [1] RING-SNAP  
22. 5S-4517 [1] CLAMP AS (TURBINE)  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
23. 8S-9225 [1] HOUSING  
24. 4N-3755 [1] COVER-COMPRESSOR  
25. 5S-4558 [1] CLAMP AS-COMPRESSOR  
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
26. 5S-4545 [1] PLATE-IDENTIFICATION  
98. 6N-7245 C [1] CARTRIDGE GP-TURBOCHARGER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP12020254
 

9N-1288: TURBOCHARGER GP

9N-1288 TURBOCHARGER GP
i00436276 SEBP1202
9N1288 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-1287 Y [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET (TURBOCHARGER)  
3. 8M-2295 [4] BOLT (3/8-16X1.625-IN)  
  7L-3195 C [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12020255
 

9N-1289: TURBOCHARGER GP

9N-1289 TURBOCHARGER GP
PART OF 9N-1290 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 9N-1280@@@@@
i00436279 SEBP1202
9N1289 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9534 [1] CARTRIDGE GP-TURBOCHARGER  
  4N-9540 [1] HOUSING AS-CENTER  
  5S-5199 [1] PIN-GROOVED  
2. 4M-6983 [4] RING-RETAINING  
3. 4N-9556 [1] SHROUD  
4. 4N-7609 [2] RING-THRUST  
5. 8S-4989 [1] WHEEL AS  
6. 7N-2856 [1] RING-SEAL  
7. 5S-4551 [1] SLEEVE-OIL CONTROL  
8. 8H-3710 [2] SCREW-TAPPING (6-32X0.375-IN)  
9. 4N-7597 [1] BEARING AS  
  5S-4547 [1] SLEEVE-SPACER  
10. 5S-4557 [2] BEARING  
11. 8S-9222 [1] SLEEVE  
12. 7N-0239 C [1] NUT-TURBOCHARGER COMPRESSOR  
13. 4M-8013 [2] RING-PISTON  
14. 5S-4556 [1] INSERT  
15. 9N-2378 [1] WHEEL-COMPRESSOR  
16. 5S-4549 [1] DEFLECTOR-OIL  
17. 5S-4546 [1] RING-RETAINING  
18. 5S-4554 [1] SEAL-O-RING  
19. 5P-5757 [1] SEAL-O-RING  
20. 5S-4558 [1] CLAMP AS-COMPRESSOR  
21. 5S-4545 [1] PLATE-IDENTIFICATION  
22. 5S-4517 [1] CLAMP AS (TURBINE)  
23. 8S-9226 [1] HOUSING  
24. 4N-3755 [1] COVER-COMPRESSOR  
   
    AVAILABLE REPAIR KIT(S):
  2W-0725 [1] KIT-CARTRIDGE (INCLUDES RINGS, SEALS, SLEEVE)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP12020256
 

9N-1290: TURBOCHARGER GP

9N-1290 TURBOCHARGER GP
S/N 76R2779-6961; 76R6985-6991
i00436283 SEBP1202
9N1290 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-1289 Y [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET (TURBOCHARGER)  
3. 7L-3195 C [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12020257
 

6N-4654: CONTROL GP-FUEL RATIO

6N-4654 CONTROL GP-FUEL RATIO
PART OF 6N-5275, 7W-0278, 9N-2308 PUMP GP-GOV & FUEL INJ
i00387093 SEBP1202
6N4654 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5764 [1] COVER-ADJUSTMENT  
2. 6L-5766 [1] GASKET  
3. 6N-1606 [1] SPRING  
4. 6L-5769 [1] WASHER  
5. 6N-1603 [1] HOUSING AS  
6. 6N-1602 [1] BUSHING  
7. 9N-0866 [1] BOLT-ADJUSTMENT  
8. 4S-7458 [1] DIAPHRAGM  
9. 2N-5919 [3] BOLT (1/4-20X0.62-IN)  
10. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
11. 5S-6120 [1] RETAINER AS  
12. 6L-5767 [1] COVER-DIAPHRAGM  
13. 6N-7523 C [5] WASHER (6.48X11.9X1.57-MM THK)  
14. 5S-6458 [1] DOWEL  
15. 6N-0968 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12020258
 

5N-7320: CONTROL GP-GOVERNOR

5N-7320 CONTROL GP-GOVERNOR
S/N 76R4457-6985
i00387141 SEBP1202
5N7320 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-1714 [2] LEVER-GOVERNOR CONTROL  
2. 7N-1263 [1] SUPPORT AS-SHAFT  
3. 9L-6937 [2] BEARING-ALIGNING  
4. 5M-6214 [2] PLUG (1/8-27 PTF)  
5. 9N-1046 Y [1] LEVER GP-GOVERNOR CONTROL  
6. 1B-4202 [2] NUT (5/16-24-THD)  
7. 7L-3227 [1] ROD-CONTROL  
8. 1B-7182 [2] BOLT (5/16-18X1.25-IN)  
  2R-0504 [2] NUT (5/16-18-THD)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 7H-3641 [2] END-ROD (5/16-24-THD)  
10. 4B-9883 [2] BOLT (5/16-24X0.875-IN)  
11. 0S-1594 [2] BOLT (3/8-16X1-IN)  
12. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 9N-1055 [1] SHAFT  
14. 9L-3360 [2] COLLAR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12020259
 

7C-8935: CONTROL GP-GOVERNOR

7C-8935 CONTROL GP-GOVERNOR
PROVIDES THROTTLE LINKAGE FOR ENGINES WITH REAR POWER TAKE-OFF
AN ATTACHMENT
i00392781 SEBP1202
7C8935 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 1673C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-1055 [1] SHAFT  
2. 4B-9883 [2] BOLT (5/16-24X0.875-IN)  
3. 9N-5303 [2] LEVER-GOVERNOR CONTROL  
4. 7C-8932 [1] SUPPORT AS  
5. 7C-9464 [1] BLOCK  
6. 9L-3360 [2] COLLAR  
7. 1B-7182 [2] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 2R-0504 [2] NUT (5/16-18-THD)  
10. 7H-3641 [2] END-ROD (5/16-24-THD)  
11. 0S-1625 [2] BOLT (5/8-11X2.5-IN)  
12. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
13. 9S-8751 [2] NUT-FULL (5/16-24-THD)  
14. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
15. 6P-5957 [1] ROD  
16. 9N-1046 Y [1] LEVER GP-GOVERNOR CONTROL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Installation Instructions For Turbocharger Bearing Kit
1984/08/06
Remanufactured Turbocharger Groups
1984/12/17
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Remanufactured Turbocharger Groups And Cartridges
1987/08/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/01
Policy for the Reuse of the Turbocharger Turbine Housing {1065}
2003/06/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/10/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/01
Packaging the Turbocharger {1052}
2007/03/01
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Truck Engines {1052, 1053}
2014/09/12
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps
1977/06/29
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage
1977/12/14
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
New Oil Supply Line And Gasket For Turbocharter
1978/08/30
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation (AiResearch Only)
3306 DIESEL TRUCK ENGINE
Turbocharger<BR> (AiResearch T12)
3306 DIESEL TRUCK ENGINE
Turbocharger<BR> (Schwitzer E Models)
3306 DIESEL TRUCK ENGINE
Turbocharger<BR> Airesearch T1224
1673 DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger
3306 DIESEL TRUCK ENGINE
Turbocharger
1673 DIESEL TRUCK ENGINE
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/07/16
Remanufactured Piece Parts Now Available For Turbochargers (U.S. and Canada Only){1052,1053,1056,1065,1077}
1984/11/19
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage{1052,1053}
1977/11/21
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Remanufactured Turbocharger Groups And Cartridges{1052,1053}
1987/08/10
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
New Oil Supply Line And Gasket For Turbocharger{1307,1052}
1978/08/28
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 1673C :

TURBOCHARGER GP
8S-8039 TURBOCHARGER GP
TURBOCHARGER GP
4N-9544 TURBOCHARGER GP
PIPE GP-EXHAUST
9N-1368 PIPE GP-EXHAUST
PIPE GP-EXHAUST
9L-2103 PIPE GP-EXHAUST
MANIFOLD GP-EXHAUST
9L-5805 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
9L-5805 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
9L-5805 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
9L-5805 MANIFOLD GP-EXHAUST
TURBOCHARGER GP
9L-5802 TURBOCHARGER GP
TURBOCHARGER GP
9N-1280 TURBOCHARGER GP
TURBOCHARGER GP
9N-1287 TURBOCHARGER GP
TURBOCHARGER GP
9N-1288 TURBOCHARGER GP
TURBOCHARGER GP
9N-1289 TURBOCHARGER GP
TURBOCHARGER GP
9N-1290 TURBOCHARGER GP
CONTROL GP-FUEL RATIO
6N-4654 CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
5N-7320 CONTROL GP-GOVERNOR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.