AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N3083 GOVERNOR GROUP--Part 1 of 3 Part of 9N2514, 9N588, 9N2512, 9N2515, 9N3746 & 9N72 Governor and Fuel Injection Pump Groups shown on Pages 94 through 97 3406


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
GOVERNOR GP

TRUCK ENGINE 3406 TRUCK ENGINE 92U
 3406 TRUCK ENGINE 92U14043-29990 IHC SEBP1209 3406 92U   (1973)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0072 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0072 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR GP
9N-3083 GOVERNOR GP
GOVERNOR GP
9N-3083 GOVERNOR GP
GOVERNOR GP
9N-3083 GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3671 DRIVE GP-GOVERNOR & FUEL PUMP
 

#SEBP12090170
 

9N-3083: GOVERNOR GP

9N3083 GOVERNOR GROUP--Part 1 of 3
Part of 9N2514, 9N588, 9N2512, 9N2515, 9N3746 & 9N72 Governor and Fuel Injection
Pump Groups shown on Pages 94 through 97
c228050 SEBP1209
9N3083 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6101 [1] LEVER ASSEM.  
2. 2P-8697 [1] GASKET  
3. 9N-0834 [1] NUT  
4. 9N-2519 [1] SCREW (low idle)  
    (Use as Required)
5. 2P-8669 [1] GASKET  
6. 1A-2343 [1] BOLT  
7. 9L-9678 [1] LOCK  
8. 2P-8707 [1] PLATE ASSEM.  
    (Includes)
9. 8L-4175 [1] DOWEL  
10. 7B-8105 [1] RING  
11. 9M-6293 [1] LOCK  
12. 0S-1615 [3] BOLT  
13. 4N-3383 [1] PISTON ASSEM.  
    (Includes)
  7S-8447 [1] PISTON ASSEM.  
14. 4N-0820 [1] SLEEVE  
15. 5P-9757 C [1] SEAL  
16. 4N-3507 [1] CYLINDER  
17. 2P-8679 [1] STRAINER ASSEM.  
18. 8S-5388 [2] GASKET  
19. 1B-2714 [2] BOLT  
  1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
20. 2N-4386 [1] COVER  
21. 9L-4990 [1] WEIGHT ASSEM.  
  C   INDICATES CHANGE
 

#SEBP12090171
 

9N-3083: GOVERNOR GP

9N3083 GOVERNOR GROUP--Part 2 of 3
Part of 9N2514, 9N588, 9N2512, 9N2515, 9N3746 & 9N72 Governor and Fuel Injection
Pump Groups shown on Pages 94 through 97
c165998 SEBP1209
9N3083 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6228 [1] SHAFT ASSEM.  
2. 5P-3272 [1] SEAL  
3. 6L-1756 [1] BOLT  
4. 1B-9575 [1] BOLT  
5. 5L-8992 [1] COVER  
6. 5L-8991 [1] GASKET  
7. 4B-9747 [1] WASHER  
8. 2B-2695 [1] BOLT  
9. 9N-1917 [1] COVER ASSEM.  
    (Includes)
10. 0S-1614 [2] BOLT  
11. 3P-0009 [1] INSULATOR  
12. 5M-6228 [1] BEARING  
13. 9N-1916 [1] LEVER  
14. 2A-0762 [2] BOLT  
15. 1S-7984 [1] BEARING  
16. 1K-4703 [1] WASHER  
17. 5P-0796 [2] SEAL  
18. 9N-2165 [1] LEVER  
19. 1S-7336 [2] LOCK  
20. 4N-0951 [1] SHAFT 13.87 cm(5.46 in.) long  
    -OR-
  9N-3644 H [1] SHAFT 11.63 cm(4.58 in.) long  
21. 8L-4308 [1] BOLT  
22. 1D-4540 [3] BOLT  
23. 9N-0062 [1] SCREW (high idle)  
24. 3F-9556 [5] WASHER  
25. 9N-3082 [1] HOUSING ASSEM.  
    (Includes)
26. 2D-6642 [1] BALL  
27. 9S-0798 [1] BEARING  
28. 8S-0134 [1] BEARING  
29. 4F-4585 [1] PLUG  
  H   NOT PART OF 9N1917 COVER ASSEM
 

#SEBP12090172
 

9N-3083: GOVERNOR GP

9N3083 GOVERNOR GROUP--Part 3 of 3
Part of 9N2514, 9N588, 9N2512, 9N2515, 9N3746 & 9N72 Governor and Fuel Injection
Pump Groups shown on Pages 94 through 97
c166003 SEBP1209
9N3083 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3096 [1] SPRING  
2. 9M-4704 [1] SCREW  
3. 8L-4154 [1] COLLAR  
4. 1B-4201 [1] NUT  
5. 8L-4155 [1] SCREW  
6. 8H-9181 [1] SPRING  
7. 6N-3504 [1] SEAT  
8. 9M-6303 [1] SPRING  
9. 2P-8630 [1] DOWEL  
10. 7M-7193 [2] RACE  
11. 7M-7219 [1] BEARING  
12. 3K-0810 [1] RING  
13. 2S-0007 [1] SLEEVE  
14. 4N-3887 [1] RING  
15. 9M-6302 [2] WASHER  
16. 6N-8629 [1] SEAT  
17. 8M-8739 [1] BOLT  
 

#SEBP12090173
 

7N-1256: PUMP GP-FUEL INJECTION

7N1256 FUEL INJECTION PUMP GROUP
Part of 9N2514, 9N2512, 9N2515 and 9N3746 Governor & Fuel Injection Pump Groups shown on Pages 94, 95 & 96
7N1219 Pump parts are shown on Page 103
c171830 SEBP1209
7N1256 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1077 [6] SEAL  
2. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 4B-4158 [4] SCREW  
5. 4N-7354 [1] SPACER  
6. 9S-4181 [1] PLUG  
7. 7M-8485 [1] O-RING  
8. 2P-8617 [1] RACK  
9. 7N-1219 Y [6] PUMP GROUP  
    (Separate Illustration)
10. 4N-7353 [1] PLATE  
11. 9N-2505 [6] LIFTER ASSEM.  
12. 0S-1618 [4] BOLT  
13. 7F-8036 [1] LOCK  
14. 9M-1974 [2] WASHER  
  6N-1172 [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
    (Includes)
  4N-0629 [1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 6N-1483 [1] CAMSHAFT ASSEM.  
    (Includes)
21. 9F-7882 [1] PIN  
22. 6N-4448 [1] HOUSING ASSEM.  
    (Includes)
23. 4B-9782 [1] BALL  
24. 4M-1474 [3] PIN  
25. 9S-4160 [1] BEARING  
26. 1S-1953 [1] BEARING  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 9F-2247 C [1] PLUG  
30. 9S-9702 [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 5M-6214 [3] PLUG (pipe)  
    - OR -
  1N-5999 C [3] PLUG (straight thread)  
  7J-0204 C [3] SEAL  
33. 4N-9837 [6] SPACER 4.96 mm(.1950 in.) thick  
  4N-9838 [6] SPACER 5.06 mm(.1990 in.) thick  
  4N-9839 [6] SPACER 5.16 mm(.2030 in.) thick  
  4N-9840 [6] SPACER 5.26 mm(.2070 in.) thick  
  4N-9841 [6] SPACER 5.36 mm(.2110 in.) thick  
  4N-9842 [6] SPACER 5.47 mm(.2150 in.) thick  
  4N-9843 [6] SPACER 5.57 mm(.2190 in.) thick  
  4N-9844 [6] SPACER 5.67 mm(.2230 in.) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12090174
 

6N-4913: PUMP GP-FUEL INJECTION

6N4913 FUEL INJECTION PUMP GROUP
Part of 9N588 and 9N72 Governor & Fuel Injection Pump Groups shown on Pages 95 & 97
6N1043 Pump parts are shown on Page 103
c171832 SEBP1209
6N4913 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1077 [6] SEAL  
2. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 6N-1043 Y [6] PUMP GROUP  
    (Separate Illustration)
5. 9S-4181 [1] PLUG  
6. 7M-8485 [1] O-RING  
7. 2P-8617 [1] RACK  
8. 4N-7354 [1] SPACER  
9. 5M-2697 [6] SPACER .1700 in. (4.32 mm) thick  
  [6] SPACER .1740 in. (4.42 mm) thick  
  2M-4209 [6] SPACER .1780 in. (4.52 mm) thick  
  2M-4210 [6] SPACER .1820 in. (4.62 mm) thick  
  2M-4211 [6] SPACER .1860 in. (4.72 mm) thick  
  2M-4212 [6] SPACER .1900 in. (4.83 mm) thick  
  5M-2691 [6] SPACER .1940 in. (4.93 mm) thick  
  5S-7189 [6] SPACER .1980 in. (5.03 mm) thick  
10. 4N-7353 [1] PLATE  
11. 6N-4923 [1] PLATE  
12. 3S-9736 [6] LIFTER ASSEM.  
13. 0S-1618 [4] BOLT  
14. 7F-8036 [1] LOCK  
  9M-1974 [2] WASHER  
  6N-1172 [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
  [1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 4N-0818 [1] CAMSHAFT-ASSEM.  
21. 9F-7882 [1] DOWEL  
22. 6N-4448 [1] HOUSING ASSEM.  
23. 4B-9782 [1] BALL  
24. 4M-1474 [3] PIN  
25. 9S-4160 [1] BEARING  
26. 5M-6214 [3] PLUG (pipe thread)  
    - OR -
  1N-5999 C [3] PLUG (straight thread)  
  7J-0204 C [3] SEAL  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 9F-2247 C [1] PLUG  
30. 9S-9702 [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 1S-1953 [1] BEARING  
33. 4B-4158 [4] SCREW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12090175
 

7N-4369: PUMP GP-FUEL INJECTION

7N4369 FUEL INJECTION PUMP GROUP
Part of 9N3702 Governor and Fuel Injection Pump Group shown on Page 94C
6N7829 Pump parts are shown on Page 102B
c171831 SEBP1209
7N4369 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1077 [6] SEAL  
4. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 4B-4158 [4] SCREW  
5. 4N-7354 [1] SPACER  
6. 9S-4181 [1] PLUG  
7. 7M-8485 [1] O-RING  
8. 2P-8617 [1] RACK  
9. 6N-7829 Y [6] PUMP GROUP  
    (Separate Illustration)
10. 4N-7353 [1] PLATE  
11. 6N-3199 [6] LIFTER ASSEM.  
12. 0S-1618 [4] BOLT  
13. 7F-8036 [1] LOCK  
14. 9M-1974 [2] WASHER  
  6N-1172 [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
    (Includes)
  4N-0629 [1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 6N-7823 [1] CAMSHAFT ASSEM.  
    (Includes)
21. 9F-7882 [1] PIN  
22. 6N-4448 [1] HOUSING ASSEM.  
    (Includes)
23. 4B-9782 [1] BALL  
24. 4M-1474 [3] PIN  
25. 9S-4160 [1] BEARING  
26. 1S-1953 [1] BEARING  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 2B-7408 [1] PLUG  
30. 9S-9702 [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 5M-6214 [3] PLUG (pipe)  
    -OR -
  1N-5999 C [3] PLUG (straight thread)  
  7J-0204 C [3] SEAL  
33. 5M-2697 [6] SPACER 4.32 mm(.1700 in.) thick  
  2M-4208 [6] SPACER 4.42 mm(.1740 in.) thick  
  2M-4209 [6] SPACER 4.53 mm(.1780 in.) thick  
  2M-4210 [6] SPACER 4.63 mm(.1820 in.) thick  
  2M-4211 [6] SPACER 4.73 mm(.1860 in.) thick  
  2M-4212 [6] SPACER 4.83 mm(.1900 in.) thick  
  5M-2691 [6] SPACER 4.93 mm(.1940 in.) thick  
  5S-7189 [6] SPACER 5.03 mm(.1980 in.) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12090176
 

6N-7829: PUMP GP-FUEL INJECTION

6N7829 FUEL INJECTION PUMP GROUP
Part of 7N4369 Fuel Injection Pump Group shown on Page 102A
c217678 SEBP1209
6N7829 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6892 [1] COLLAR  
2. 6N-0024 [1] SPRING  
3. 9L-6893 [1] BONNET  
4. 9N-0593 [1] CHECK ASSEM.  
5. 1M-3506 [1] RING  
6. 6N-7828 [1] PLUNGER AND BARREL ASSEM.  
7. 7N-1208 [1] SPRING  
8. 7N-1066 [1] WASHER  
 

#SEBP12090177
 

9N-5995: FUEL INJECTION PUMP GROUP

9N5995 FUEL INJECTION PUMP GROUP
Part of 9N6002 and 9N6005 Governor and Fuel Injection Pump Groups shown on Pages 94A & 94B
7N1219 Pump parts are shown on Page 103
c225352 SEBP1209
9N5995 FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-2992 [6] SEAL  
2. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 4B-4158 [4] SCREW  
5. 4N-7354 [1] SPACER  
6. 9S-4181 [1] PLUG  
7. 7M-8485 [1] O-RING  
8. 2P-8617 [1] RACK  
9. 7N-1219 Y [6] PUMP GROUP  
    (Separate Illustration)
10. 4N-7353 [1] PLATE  
11. 9N-2505 [6] LIFTER ASSEM.  
12. 0S-1618 [4] BOLT  
13. 7F-8036 [1] LOCK  
14. 9M-1974 [2] WASHER  
  6N-1172 [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
    (Includes)
  4N-0629 [1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 9N-6099 [1] CAMSHAFT ASSEM.  
    (Includes)
21. 9F-7882 [1] PIN  
22. 6N-4448 [1] HOUSING ASSEM.  
    (Includes)
23. 4B-9782 [1] BALL  
24. 4M-1474 [3] PIN  
25. 9S-4160 [1] BEARING  
26. 1S-1953 [1] BEARING  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 9F-2247 [1] PLUG  
30. 9S-9702 [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 1N-5999 [3] PLUG  
  7J-0204 [3] SEAL  
33. 4N-9837 [6] SPACER 4.96 mm(.1950 in.) thick  
  4N-9838 [6] SPACER 5.06 mm(.1990 in.) thick  
  4N-9839 [6] SPACER 5.16 mm(.2030 in.) thick  
  9N-9840 [6] SPACER 5.26 mm(.2070 in.) thick  
  4N-9841 [6] SPACER 5.36 mm(.2110 in.) thick  
  4N-9842 [6] SPACER 5.47 mm(.2150 in.) thick  
  4N-9843 [6] SPACER 5.57 mm(.2190 in.) thick  
  4N-9844 [6] SPACER 5.67 mm(.2230 in.) thick  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12090178
 

9N-3838: PUMP GP-FUEL INJECTION

9N3838 FUEL INJECTION PUMP GROUP
Serial No. 92U22675--Up
Part of 9N3839 Governor and Fuel Injection Pump Group shown on Page 96A
7N1219 Pump parts are shown on Page 103
c171833 SEBP1209
9N3838 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1077 [6] SEAL  
2. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 4B-4158 [4] SCREW  
5. 4N-7354 [1] SPACER  
6. 9S-4181 [1] PLUG  
7. 7M-8485 [1] O-RING  
8. 2P-8617 [1] RACK  
9. 7N-1219 Y [6] PUMP GROUP  
    (Separate Illustration)
10. 4N-7353 [1] PLATE  
11. 9N-2505 [6] LIFTER ASSEM.  
12. 0S-1618 [4] BOLT  
13. 7F-8036 [1] LOCK  
14. 9M-1974 [2] WASHER  
  6N-1172 [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
    (Includes)
  4N-0629 [ 1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 9N-3836 [1] CAMSHAFT ASSEM.  
    (Includes)
21. 9F-7882 [1] PIN  
22. 6N-4448 [1] HOUSING ASSEM.  
    (Includes)
23. 4B-9782 [1] BALL  
24. 4M-1474 [3] PIN  
25. 9S-4160 [1] BEARING  
26. 5M-6214 [3] PLUG (pipe thread)  
    - OR -
  1N-5999 C [3] PLUG (straight thread)  
  7J-0204 C [3] SEAL  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 9F-2247 [1] PLUG  
30. 9S-9702 [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 1S-1953 [1] BEARING  
33. 4N-9837 [6] SPACER 4.96 mm(.1950 in.)thick  
  4N-9838 [6] SPACER 5.06 mm(.1990 in.)thick  
  4N-9839 [6] SPACER 5.16 mm(.2030 in.)thick  
  9N-9840 [6] SPACER 5.26 mm(.2070 in.)thick  
  4N-9841 [6] SPACER 5.36 mm(.2110 in.)thick  
  4N-9842 [6] SPACER 5.47 mm(.2150 in.)thick  
  4N-9843 [6] SPACER 5.57 mm(.2190 in.)thick  
  4N-9844 [6] SPACER 5.67 mm(.2230 in.)thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12090179
 

9N-3671: DRIVE GP-GOVERNOR & FUEL PUMP

9N3671 GOVERNOR AND FUEL PUMP DRIVE GROUP
c228044 SEBP1209
9N3671 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-6176 [2] WEIGHT  
2. 9N-3691 [2] SPRING (inner)  
3. 9N-3692 [2] SPRING (outer)  
4. 9N-5462 C [1] GEAR ASSEM. (64 Teeth)  
5. 6N-0493 [1] RING  
6. 4N-5230 [1] GASKET  
7. 6H-3957 [1] BEARING  
8. 1T-0033 [1] RING  
9. 6N-0491 [1] SHAFT  
10. 4N-3936 [1] HOUSING ASSEM.  
11. 4N-0684 [2] PIN  
12. 4N-4551 [1] SHAFT ASSEM. (11 Teeth)  
  6L-4081 [1] BEARING  
  6L-4082 [2] RACE  
13. 4N-3934 [1] ADAPTER  
  4N-3933 [1] GASKET  
14. 1B-7182 [2] BOLT  
  9M-1974 [2] WASHER  
15. 2N-7013 [1] STOP  
16. 8H-9788 [2] GASKET  
17. 2N-7014 [1] SPACER  
18. 0S-1588 [6] BOLT 3.18cm(1.25 in.) long  
19. 0S-1571 [1] BOLT 4.45 cm(1.75 in.) long  
20. 5M-2894 [7] WASHER  
21. 4N-0813 [1] GASKET  
22. 0S-1591 [2] BOLT  
23. 5H-7370 [1] SEAL  
24. 4N-5232 [1] RETAINER  
25. 4N-0580 [2] SLIDE  
26. 6N-0495 [1] FLANGE ASSEM.  
27. 6N-3927 [1] RETAINER  
28. 5J-5793 [4] BOLT  
29. 5P-9294 C [1] SEAL  
  C   INDICATES CHANGE
 

Information:

Truck Engine News
Low Idle Instability: New Low Idle Setting
1981/09/23
Part Number For Fuel Injection Pump Group In New Location
1981/11/13
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
New Filter Orifice Helps Prevent Governor Surge
1983/08/31
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Engine News
Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings
1980/09/10
New Timing Advance Weight Used
1980/10/01
New Spring Used In Fuel Ratio Control
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power
1978/04/05
Stronger Weights And Gear Used In Automatic Timing Advance
1978/05/03
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump
1978/08/30
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Pump Housing
3406 DIESEL TRUCK ENGINE
Governor
3406 DIESEL TRUCK ENGINE
Automatic Timing Advance Unit
3406 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406 DIESEL TRUCK ENGINE
Drive For Fuel Transfer Pump And Tachometer
3406 DIESEL TRUCK ENGINE
Disassembly and Assembly
Air Compressor Governor
3406 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406 DIESEL TRUCK ENGINE
Fuel Transfer Pump (Later)
3406 DIESEL TRUCK ENGINE
Automatic Timing Advance
3406 DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor (Earlier)
3406 DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor (Earlier And Later)
3406 DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3406 DIESEL TRUCK ENGINE
Governor
3406 DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406 DIESEL TRUCK ENGINE
Fuel Injection Pump And Governor Drive
3406 DIESEL TRUCK ENGINE
Service Magazine
Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines{7400,1265}
1980/06/30
Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings{1264,1278}
1980/08/25
New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06
Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines{7400,1265}
1980/11/03
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Low Idle Instability: New Low Idle Setting {1264}
1981/09/14
Use Only EPA-Approved Rack And Idle Setting; Change Seal, Date Plate{1257,1251,1264}
1981/09/21
Wrong Fuel Setting Information Given In Microfiche{0374,1251,1264,1257}
1981/10/19
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
New Filter Orifice Helps Prevent Governor Surge{1264,1263}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power{1265,1269}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
When Timing The Engine, Be Sure The Timing Bolt Is Installed In The Correct Hole In The Flywheel{1156,1251,1281}
1979/08/06
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406 :

GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0072 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0072 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3839 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-5435 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3746 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2515 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-2512 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0588 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR GP
9N-3083 GOVERNOR GP
GOVERNOR GP
9N-3083 GOVERNOR GP
PUMP GP-FUEL INJECTION
7N-1256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6N-4913 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7N-4369 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6N-7829 PUMP GP-FUEL INJECTION
FUEL INJECTION PUMP GROUP
9N-5995 FUEL INJECTION PUMP GROUP
PUMP GP-FUEL INJECTION
9N-3838 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
32.000 
Caterpillar 3406-365, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
FINNING CHILE S.A.
 
41.565 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


 
55.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.