AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FAN BELT CHART Your Caterpillar dealer has additional information regarding fan belts in his Engine bills of material file AN ATTACHMENT 3406


BASIC ENGINE
MISCELLANEOUS INFORMATION
BELT TIGHTENER GP
DRIVE GP-AUXILIARY
DRIVE GP-FAN

TRUCK ENGINE 3406 TRUCK ENGINE 92U
 3406 TRUCK ENGINE 92U14043-29990 PACCAR SEBP1210 3406 92U   (1973)

BASIC ENGINE

MISCELLANEOUS INFORMATION
FAN BELT CHART
FAN BELT CHART
 

#SEBP12100080
 

FAN BELT CHART

FAN BELT CHART
Your Caterpillar dealer has additional information regarding fan belts in his Engine bills of material file
AN ATTACHMENT
SEBP12100080 SEBP1210
None FAN BELT CHART Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP12100081
 

9N-2112: TIGHTENER GP

9N2112 IDLER PULLEY GROUP
Refer to chart shown on Page 47 for usage
AN ATTACHMENT
c218527 SEBP1210
9N2112 TIGHTENER GP Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [1] BOLT  
  7K-3215 [1] BOSS  
2. 5M-2894 [5] WASHER  
3. 4D-9835 C [1] STUD  
  1D-4720 [1] NUT  
  4D-3704 [1] WASHER  
  3R-8530 [1] SPACER  
4. 0T-0055 [1] BOLT  
5. 9N-0316 [1] BRACKET  
6. 5M-1932 [1] STUD  
  1D-4719 [1] NUT  
  2M-0849 [1] WASHER  
7. 0S-1594 [4] BOLT  
8. 9N-0413 [1] COVER  
  9N-1853 [1] GASKET  
9. 0L-1351 [2] BOLT  
10. 5S-2106 [1] SEAL  
11. 9N-0311 [1] SPACER  
12. 9N-1003 [1] PULLEY  
13. 8H-9789 [1] BEARING  
14. 7H-7954 [1] BOLT  
  2F-6262 [1] WASHER  
15. 9N-0318 [1] COVER  
16. 3B-8489 [1] FITTING  
17. 7F-2122 [1] SEAL  
18. 9N-1012 [1] SPACER  
19. 9F-2247 [1] PLUG  
 

#SEBP12100082
 

6N-0322: AUXILAIRY DRIVE GROUP

6N322 AUXILAIRY DRIVE GROUP--R.H. Front
CANNOT BE USED WITH R.H. IDLER PULLEY
AN ATTACHMENT
c212625 SEBP1210
6N0322 AUXILAIRY DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0321 [1] SHAFT ASSEM.  
2. 8H-9789 [1] BEARING  
3. 4N-5247 [1] PULLEY  
4. 1B-7709 [1] BOLT  
5. 2P-3696 [1] RETAINER  
6. 4K-4845 [1] SEAL  
7. 0S-1594 C [4] BOLT  
8. 5M-2894 C [4] WASHER  
9. 4N-5165 [1] HOUSING  
10. 4H-6520 [1] SEAL  
11. 4N-0684 [2] PIN  
12. 6F-6405 C [1] SPACER  
13. 6B-0933 C [2] SPACER  
  C   INDICATES CHANGE
 

#SEBP12100083
 

9N-2113: DRIVE GP-FAN

9N2113 FAN DRIVE GROUP
Refer to Chart shown on Page 47 for usage
AN ATTACHMENT
c159955 SEBP1210
9N2113 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT  
  2M-0849 [2] WASHER  
2. 9N-2111 [1] BRACKET ASSEM.  
    (Includes)
3. 9N-1262 [1] SHAFT  
4. 4N-0684 [1] PIN  
5. 9N-2104 [1] PULLEY  
6. 9N-1012 [1] SPACER  
7. 7F-2122 [1] SEAL  
8. 8H-9789 [2] BEARING  
9. 9N-2115 [1] ADAPTER  
10. 1H-5403 [2] BOLT  
11. 3B-8489 [1] FITTING  
12. 5S-7264 [1] WASHER  
13. 0S-1588 [6] BOLT  
14. 5S-2106 [1] SEAL  
15. 5S-9062 [1] SPACER  
 

#SEBP12100084
 

9N-2109: DRIVE GP-FAN

9N2109 FAN DRIVE GROUP
Refer to chart shown on Page 47 for usage
AN ATTACHMENT
c165943 SEBP1210
9N2109 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT  
  2M-0849 [2] WASHER  
2. 6L-7283 [1] BOLT  
3. 9N-2106 [1] PULLEY  
4. 1A-2029 [2] BOLT  
5. 3B-8489 [1] FITTING  
6. 9N-2107 [1] ADAPTER  
7. 1H-5403 [2] BOLT  
8. 5S-7264 [1] WASHER  
9. 6L-6827 [6] STUD  
10. 7F-2122 [1] SEAL  
11. 9N-1012 [1] SPACER  
12. 8H-9789 [2] BEARING  
13. 5S-2106 [1] SEAL  
14. 5S-9062 [1] SPACER  
15. 9N-2108 [1] BRACKET ASSEM.  
    (Includes)
16. 9N-2317 [1] SHAFT  
17. 4N-0684 [1] DOWEL  
18. 0S-1594 [2] BOLT  
19. 4N-2368 [1] BRACKET  
 

#SEBP12100085
 

9N-2349: DRIVE GP-FAN

9N2349 FAN DRIVE GROUP--Type 1
Refer to Chart shown on Page 47 for usage
AN ATTACHMENT
c159956 SEBP1210
9N2349 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT  
  2M-0849 [2] WASHER  
2. 6L-7283 [1] BOLT  
  5M-2894 [1] WASHER  
3. 9N-0337 [1] PULLEY  
4. 1A-2029 [2] BOLT  
5. 3B-8489 [1] FITTING  
6. 9N-2107 [1] ADAPTER  
7. 1H-5403 [2] BOLT  
8. 5S-7264 [1] WASHER  
9. 6L-6827 [6] STUD  
10. 7F-2122 [1] SEAL  
11. 9N-1012 [1] SPACER  
12. 8H-9789 [2] BEARING  
13. 5S-2106 [1] SEAL  
14. 5S-9062 [1] SPACER  
15. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
16. 9N-2317 [1] SHAFT  
17. 4N-0684 [1] DOWEL  
18. 0S-1594 [2] BOLT  
19. 4N-2368 [1] BRACKET  
 

#SEBP12100086
 

9N-2349: DRIVE GP-FAN

9N2349 FAN DRIVE GROUP--Type 2
Refer to Chart shown on Page 47 for usage
AN ATTACHMENT
c228220 SEBP1210
9N2349 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT  
  2M-0849 [2] WASHER  
2. 6L-7283 [1] BOLT  
3. 9N-0337 [1] PULLEY  
4. 1A-2029 [2] BOLT  
5. 3B-8489 [1] FITTING  
6. 9N-2107 [1] ADAPTER  
7. 1H-5403 [2] BOLT  
8. 5S-7264 [1] WASHER  
9. 6L-6827 [6] STUD  
10. 7F-2122 [1] SEAL  
11. 9N-1012 [1] SPACER  
12. 8H-9789 [2] BEARING  
13. 5S-2106 [1] SEAL  
14. 5S-9062 [1] SPACER  
15. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
16. 9N-2317 [1] SHAFT  
17. 4N-0684 [1] DOWEL  
18. 0S-1594 [2] BOLT  
19. 9N-5120 C [1] BRACKET  
20. 5M-2894 C [3] WASHER  
  C   INDICATES CHANGE
 

#SEBP12100087
 

9N-2117: DRIVE GP-FAN

9N2117 FAN DRIVE GROUP
Refer to Chart shown on Page 47 for usage
AN ATTACHMENT
c228221 SEBP1210
9N2117 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-7283 [1] BOLT  
  5M-2894 [1] WASHER  
2. 1A-1460 [2] BOLT  
3. 2M-0849 [2] WASHER  
4. 5S-2106 [1] SEAL  
5. 9N-0337 [1] PULLEY  
6. 1A-2029 [6] BOLT  
7. 8H-9789 [2] BEARING  
8. 3B-8489 [1] FITTING  
9. 1H-5403 [2] BOLT  
  5S-7264 [1] WASHER  
10. 9N-2115 [1] ADAPTER  
11. 9N-1012 [1] SPACER  
12. 7F-2122 [1] SEAL  
13. 5S-9062 [1] SPACER  
14. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
15. 9N-2317 [1] SHAFT  
16. 4N-0684 C [1] DOWEL  
17. 9N-5120 C [1] BRACKET  
18. 0S-1594 [2] BOLT  
19. 5M-2894 C [2] WASHER  
  C   INDICATES CHANGE
 

#SEBP12100088
 

9N-3722: DRIVE GP-FAN

9N3722 FAN DRIVE GROUP--9.625 Diameter Pulley--Type 1
Provides an .88:1 Fan Drive Ratio when used with an 8.50 Diameter Crank Pulley
AN ATTACHMENT
c168052 SEBP1210
9N3722 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [2] BOLT  
2. 4N-2368 [1] BRACKET  
3. 5S-9062 [1] SPACER  
4. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
  4N-0684 [1] PIN  
5. 9N-2317 [1] SHAFT  
6. 9N-1012 [1] SPACER  
7. 7F-2122 [1] SEAL  
8. 5S-7264 [1] WASHER  
9. 9N-3721 [1] ADAPTER  
10. 1H-5403 [2] BOLT  
11. 3B-8489 [1] FITTING  
12. 0S-1571 [6] BOLT  
13. 8H-9789 [2] BEARING  
14. 9N-2881 [1] PULLEY  
15. 5S-2106 [1] SEAL  
16. 5M-2894 [6] WASHER  
 

#SEBP12100089
 

9N-3722: DRIVE GP-FAN

9N3722 FAN DRIVE GROUP--9.625 Diameter Pulley--Type 2
Provides an .88:1 Fan Drive Ratio When used with an 8.50 Diameter Crank Pulley
AN ATTACHMENT
c228219 SEBP1210
9N3722 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [2] BOLT  
2. 9N-5120 C [1] BRACKET  
3. 5S-9062 [1] SPACER  
4. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
  4N-0684 [1] PIN  
5. 9N-2317 [1] SHAFT  
6. 9N-1012 [1] SPACER  
7. 7F-2122 [1] SEAL  
8. 5S-7264 [1] WASHER  
9. 9N-3721 [1] ADAPTER  
10. 1H-5403 [2] BOLT  
11. 3B-8489 [1] FITTING  
12. 0S-1571 [6] BOLT  
13. 8H-9789 [2] BEARING  
14. 9N-2881 [1] PULLEY  
15. 5S-2106 [1] SEAL  
16. 5M-2894 C [8] WASHER  
  C   INDICATES CHANGE
 

Information:

Truck Engine News
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/24
Modification Of Flywheel Prevents Loose Clutch Pilot Bearing
1981/03/06
Correction To Torque Specification For Locknuts On Valve Clearance Adjustment Screws Of Engines Equipped With Jacobs Engine Brakes
1981/04/09
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/08/18
One-piece Panel Used For Oil Pan Sound Suppression
1981/09/23
Oil Pan Drain Plug Has More Threads
1981/11/13
Service Manual Information About Inside Diameters Of Valve Guides
1981/11/13
New Cylinder Liners And O-ring Seals Give Longer Seal Life
1982/01/13
Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear
1982/01/13
New Fuel Nozzle Adapter Assembly Used
1982/02/17
Carbon Build-up In Combustion And Inlet Areas
1982/03/31
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/27
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
New Crankshaft Seal Groups Used
1982/12/08
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/26
New Water Pump Has Improved Seal
1983/03/02
Engine Valve Stem "use Again " Specifications
1983/03/02
New Piston Group Has A Thicker Top Ring
1983/03/02
Fabricated Bracket Decreases Stress On Refrigerant Compressor Bracket
1983/04/13
New Specification For Adjustment Of Jacobs Engine Brake
1983/05/18
6V6142 And 6V6143 Installers Must Be Used To Install Crankshaft Seals And Wear Sleeves
1983/06/29
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again
1983/06/29
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29
New Liner Seat Insert Available
1983/08/31
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
New Cylinder Head Assembly Made With A Different Material
1984/02/15
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/23
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position
1984/06/27
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26
New Inlet Valves Used In Cylinder Heads
1984/09/26
New Cylinder Block Groups Used
1984/09/26
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Be Sure Correct Piston Rings Are Used On 3400 Series Engines
1985/05/01
New Tools Available To Change Brakesaver Control Valve Diaphragm
1985/09/01
Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01
New 8T2998 Lubricant Available
1986/02/01
New Cylinder Liner Available
1986/02/01
Stronger Oil Pan Used
1986/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/09/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
High Alloy Cylinder Head Improved
1987/07/01
Silicone Rubber Water Seals Available
1987/07/01
Improved Valve Mechanism Cover Groups
1987/12/01
Remanufactured Cylinder Heads For 3406 Engines
1988/04/01
New Liner Seat Insert Available
1988/11/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
Improved Head Gasket Used; Service Tips
1990/02/01
Service Tips For Piston Cooling Jets (Tubes)
1990/11/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
Thinner Spacer Plate Available For Parts Service
1992/03/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Cylinder Pack Puller Groups Improved
1992/12/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Additional Parts Required For Remanufactured Short Block
1993/09/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
New Intake And Exhaust Valves Used{1105,1100}
1994/06/24
New Valve Lifter Assembly Provide Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/24
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26
Engine News
Engine Mounted Exhaust Brake Systems Can Be Used To Extend Service Brake Life
1979/03/07
New Air Inlet Tube Gives Enough Room To Install A "Jake Brake"
1979/07/04
When Timing The Engine, Be Sure The Timing Bolt Is Installed In The Correct Hole In The Flywheel
1979/08/22
New Design Thrust Plate Used In Crankshaft Group
1979/08/22
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines
1980/04/09
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Reference List Of Pistons Used With The Different Types Of Connecting Rods
1980/09/10
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/12
New Flywheel Assemblies Are Available For Use With Spicer Transmissions
1977/01/28
New Cylinder Liners
1977/01/28
Same Valve Camshaft Assembly Used On Direct Injection Engines Now Used On Engines That Have Precombustion Chambers
1977/01/28
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/01/28
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
Improved Exhaust Valve Now Available
1977/03/15
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Installation Procedure For Crankshaft Wear Sleeves Changed
1977/09/07
Stronger Piston Is Used; Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1977/09/28
Replacement Bearings Have Aluminum Alloy With More Strength
1977/10/26
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts
1977/11/09
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Replacement Seals And Wear Sleeves Now Available As A Crankshaft Seal Kit
1978/03/01
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Stronger Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1978/03/01
Cylinder Block Has New Cover With An Oil Return Connection For Rockford Fan Drive
1978/04/19
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Specifications
Valve Rocker Arms, Lifters, Bridges And Cover
3406 DIESEL TRUCK ENGINE
Valves
3406 DIESEL TRUCK ENGINE
Idler Gear Assembly
3406 DIESEL TRUCK ENGINE
Cylinder Head
3406 DIESEL TRUCK ENGINE
Oil Pan
3406 DIESEL TRUCK ENGINE
V-Belt Tension Chart
3406 DIESEL TRUCK ENGINE
Cylinder Block
3406 DIESEL TRUCK ENGINE
Cylinder Liner
3406 DIESEL TRUCK ENGINE
Cylinder Liner Projection
3406 DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406 DIESEL TRUCK ENGINE
Flywheel Housings
3406 DIESEL TRUCK ENGINE
Flywheel Housing Bore
3406 DIESEL TRUCK ENGINE
Flywheel Housing Runout
3406 DIESEL TRUCK ENGINE
Flywheels
3406 DIESEL TRUCK ENGINE
Flywheel Runout
3406 DIESEL TRUCK ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Water Pump
3406 DIESEL TRUCK ENGINE
Rocker Shafts And Push Rods
3406 DIESEL TRUCK ENGINE
Rocker Shafts
3406 DIESEL TRUCK ENGINE
Precombustion Chambers
3406 DIESEL TRUCK ENGINE
Cylinder Head Assembly
3406 DIESEL TRUCK ENGINE
Spacer Plate
3406 DIESEL TRUCK ENGINE
Valves
3406 DIESEL TRUCK ENGINE
Valve Seat Inserts
3406 DIESEL TRUCK ENGINE
Bridge Dowels
3406 DIESEL TRUCK ENGINE
Valve Guides
3406 DIESEL TRUCK ENGINE
Valve Lifters
3406 DIESEL TRUCK ENGINE
Oil Pan
3406 DIESEL TRUCK ENGINE
Piston Cooling Tubes
3406 DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406 DIESEL TRUCK ENGINE
Cylinder Liners
3406 DIESEL TRUCK ENGINE
Fan Drive
3406 DIESEL TRUCK ENGINE
Fan Drive (Earlier)
3406 DIESEL TRUCK ENGINE
Fan Drive (Later)
3406 DIESEL TRUCK ENGINE
Vibration Damper And Pulley
3406 DIESEL TRUCK ENGINE
Crankshaft Front Seal And Wear Sleeve
3406 DIESEL TRUCK ENGINE
Timing Gears And Plate
3406 DIESEL TRUCK ENGINE
Flywheel
3406 DIESEL TRUCK ENGINE
Flywheel Housing
3406 DIESEL TRUCK ENGINE
Camshaft Bearings
3406 DIESEL TRUCK ENGINE
Jacobs Engine Brake
3406 DIESEL TRUCK ENGINE
Flywheel (Brakesaver)
3406 DIESEL TRUCK ENGINE
Oil Pan (Brakesaver)
3406 DIESEL TRUCK ENGINE
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
Later Pistons Have A Smaller Number Of Drain Holes In Oil Ring Groove{1214,1213}
1981/02/23
Modification Of Flywheel Prevents Loose Clutch Pilot Bearing{1155,1156}
1981/03/02
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
One-Piece Panel Used For Oil Pan Sound Suppression{7260,1801,1302}
1981/09/07
Oil Pan Drain Plug Has More Threads{1302}
1981/09/28
Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}
1981/10/05
Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear{1216,1201}
1981/11/16
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Piston Pin Retainer Used{1214,1225}
1982/02/08
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Reminder: Check Valve Lash Adjustment At Correct Intervals{1102}
1982/04/05
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/06/21
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications{0651,1250,1156,1157}
1982/10/11
Wider Crankshaft Gear Used{1202,1204,1206}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Seal Groups Used{1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/12/13
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
New Water Pump Has Improved Seal{1361}
1983/02/14
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
Fabricated Bracket Decreases Stress On Refrigerant Compressor Bracket{1405,1802}
1983/03/14
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
New Specification For Adjustment Of Jacobs Engine Brake{1119}
1983/05/09
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again{1201,0374}
1983/07/04
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Valve Lifter Assemblies Used In Valve Mechanism Groups{1209}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Plastic Impeller Will Help Improve Service Life Of Water Pump Seal{1361}
1984/01/23
3406 Remanufactured Truck Engines Available{1000}
1984/04/23
Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Inspection And Installation Procedures For Water Pump Shaft And Seals{1361,1389,1373}
1985/06/17
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Same Valve Camshaft Assembly Used On Direct Injection Engines Now Used On Engines That Have Precombustion Chambers{1210}
1977/01/24
New Cylinder Liners{1216}
1977/01/24
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
Improved Exhaust Valve Now Available{1105}
1977/02/28
Use Insert To Repair Bearing Seat In Water Pump Housing{1361}
1977/03/07
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Installation Procedure For Crankshaft Wear Sleeves Changed{1202,1160,1161}
1977/09/05
Stronger Piston Is Used; Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218}
1977/09/19
Replacement Bearings Have Aluminum Alloy With More Strength{1203,1213,1230}
1977/10/24
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Hollow Dowel Relieves Accessory Drive Oil Leakage{1207,1166}
1987/05/18
Recommendations For Reusability Of Pistons With Crater Rim Cracks{1214}
1987/06/29
New Water Pump Group Used{1361}
1987/06/29
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Replacement Seals And Wear Sleeves Now Available As A Crankshaft Seal Kit{1202,1160,1161}
1978/02/27
Stronger Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218}
1978/03/06
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Cylinder Block Has New Cover With An Oil Return Connection For Rockford Fan Drive{1201}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Grind Material From Boss On Parts Service Cylinder Block To Give Clearance For Starting Motor Mounting Bolt{1201,1453}
1978/06/19
New One-Piece Flywheel Housing Gasket{1157,1201}
1978/07/03
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Piston Application Guide{1214,1215}
1988/06/13
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Engine Mounted Exhaust Brake Systems Can Be Used To Extend Service Brake Life{1050}
1979/03/05
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Design Thrust Plate Used In Crankshaft Group{1201,1202,1203}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Piston Pin Retainer Used{1225}
1991/10/14
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
New Liner Seat Inserts Available{1217}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

Caterpillar Parts SIS Catalog 3406 :

DRIVE GP-PUMP
4N-5319 DRIVE GP-PUMP
DAMPER & PULLEY GP
9N-1375 DAMPER & PULLEY GP
DAMPER & PULLEY GP
9N-0945 DAMPER & PULLEY GP
DRIVE GP-ACCESSORY
4N-2264 DRIVE GP-ACCESSORY
COVER GP
9N-0642 COVER GP
HOUSING GP-FRONT
4N-3911 HOUSING GP-FRONT
GEAR GP-FRONT TIMING
4N-2274 GEAR GP-FRONT TIMING
LIFTING GP
9N-0073 LIFTING GP
TIGHTENER GP
9N-2112 TIGHTENER GP
AUXILAIRY DRIVE GROUP
6N-0322 AUXILAIRY DRIVE GROUP
DRIVE GP-FAN
9N-2113 DRIVE GP-FAN
DRIVE GP-FAN
9N-2109 DRIVE GP-FAN
DRIVE GP-FAN
9N-2349 DRIVE GP-FAN
DRIVE GP-FAN
9N-2349 DRIVE GP-FAN
DRIVE GP-FAN
9N-2117 DRIVE GP-FAN
DRIVE GP-FAN
9N-3722 DRIVE GP-FAN

Truck sale:

Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
32.000 
Caterpillar 3406-365, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
FINNING CHILE S.A.
 
41.565 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


 
55.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.