AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3306 ENGINE 07Y00001-04278 BASIC ENGINE Caterpillar SIS



GAS ENGINE G3306 GAS ENGINE 07Y
 G3306 ENGINE 07Y00001-04278 SEBP1213 G3306 07Y   (1978)

Parts group G3306:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
CYLINDER BLOCK AS
2P-8776 CYLINDER BLOCK AS
2P8776 CYLINDER BLOCK ASSEMBLY
S/N 7Y1-290
PART OF 2P6560 CYLINDER BLOCK
CYLINDER BLOCK AS
7N-6550 CYLINDER BLOCK AS
7N6550 CYLINDER BLOCK ASSEMBLY
S/N 7Y744-UP
PART OF 7N8016, 8N5286 CYLINDER BLOCK
FIELD REPLACEMENT ORDER 1N3576-PAGE 11C & 6N7727 CYLINDER BLOCK KIT
BELT TIGHTENER GP
BELT TIGHTENER GP
3N-2755 BELT TIGHTENER GP
3N2755 FAN DRIVE BELT TIGHTENER GROUP
FOR USE AS FAN DRIVE BELT TIGHTENER WITHOUT ALTERNATOR
FOR USE WITH ENGINE SUPPORT.
NOT FOR USE WITH MOBILE EQUIPMENT
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
2P-6202 CAMSHAFT GP
2P6202 CAMSHAFT GROUP
CLUTCH GP
CLUTCH GP-FLYWHEEL
2R-6914 CLUTCH GP-FLYWHEEL
2R6914 FLYWHEEL CLUTCH GROUP
2N6961-PAGE 97
AN ATTACHMENT
CLUTCH GP
2W-4906 CLUTCH GP
2W4906 CLUTCH GROUP-PART 1 OF 2
TYPE 1
PART OF 2W4907 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4906 CLUTCH GP
2W4906 CLUTCH GROUP-PART 2 OF 2
TYPE 1
PART OF 2W4907 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4906 CLUTCH GP
2W4906 CLUTCH GP-PART 1 OF 2
TYPE 2
PART OF 2W4907 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4906 CLUTCH GP
2W4906 CLUTCH GP-PART 2 OF 2
TYPE 2
PART OF 2W4907 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
3N-9097 CLUTCH GP
3N9097 CLUTCH GROUP
TWIN DISC NO. X9643. SPECIFICATION NO. 37068
PART OF 3N9098 REAR POWER TAKE-OFF
AN ATTACHMENT
CLUTCH GP
2W-4902 CLUTCH GP
2W4902 CLUTCH GROUP
PART OF 2W4903 REAR POWER TAKE-OFF-PAGE 96A
FIELD REPLACEMENT FOR 3N4128-PAGE 96G
AN ATTACHMENT
CLUTCH GP
4P-3073 CLUTCH GP
4P3073 CLUTCH GP
PART OF 4P3074 POWER TAKE OFF
AN ATTACHMENT
CLUTCH AS
3N-4128 CLUTCH AS
3N4128 CLUTCH ASSEMBLY
FIELD REPLACEMENT FOR 2W4902-PAGE 96F
CLUTCH GP-FLYWHEEL
6L-6468 CLUTCH GP-FLYWHEEL
6L6468 FLYWHEEL CLUTCH GROUP
2N7078-PAGE 98
AN ATTACHMENT
CLUTCH GP
2N-6961 CLUTCH GP
2N6961 CLUTCH ASSEMBLY
SPECIFICATION N0.35281-UP
PART OF 2R6914 FLYWHEEL CLUTCH
AN ATTACHMENT
CLUTCH GP
2N-7078 CLUTCH GP
2N7078 CLUTCH ASSEMBLY
SPECIFICATION NO. 33590-UP
PART OF 6L6468 FLYWHEEL CLUTCH
AN ATTACHMENT
COUPLING GP
COUPLING GP-GENERATOR DRIVE
6L-3916 COUPLING GP-GENERATOR DRIVE
6L3916 GENERATOR DRIVE COUPLING GROUP
TYPE 1
AN ATTACHMENT
COUPLING GP-GENERATOR DRIVE
6L-3916 COUPLING GP-GENERATOR DRIVE
6L3916 GENERATOR DRIVE COUPLING GROUP
TYPE 2
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
4N7693 CRANKSHAFT ASSEMBLYFIELD INSTALLATIO*R
FIELD REPLACEMENT FOR 4N7697
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
2P6222 CRANKSHAFT GROUP
S/N 7Y1-290
FIELD REPLACEMENT OF 4N7697 ORDER 4N7693-PAGE 12
CRANKSHAFT SERVICE THRUST PLATE-FIELD INSTALLATION
CRANKSHAFT SERVICE THRUST PLATE-FIELD INSTALLATION
PROVIDES A THRUST PLATE TO BE USED IN THE EVENT A "WIDE" THRUST
JOURNAL CRANKSHAFT IS INSTALLED IN A SPACER PLATE CYLINDER BLOCK
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
6N8079 CRANKSHAFT GP
S/N 7Y291-3277
FOR FIELD REPLACEMENT OF 4N7697 CRANKSHAFT ORDER
4N7693-PAGE 12 OR 2W7458-PAGE 12B
CRANKSHAFT AS
2W-7458 CRANKSHAFT AS
2W7458 CRANKSHAFT AS*R
S/N 7Y291-UP
PART OF 6N8079 CRANKSHAFT
ALSO FIELD REPLACEMENT OF 4N7697
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
6N8079 CRANKSHAFT GP
S/N 7Y3278-UP
2W7458-PAGE 12B
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
2P6224 CRANKSHAFT SEAL GROUP
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
3N2886 SEAL ADAPTER GROUP
S/N 7Y1-838
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
3N2886 SEAL ADAPTER GROUP
S/N 7Y839-1501
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
3N2886 SEAL ADAPTER GROUP
S/N 7Y1502-UP
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
2P-6517 COVER GP-CYLINDER BLOCK
2P6517 CYLINDER BLOCK COVER GROUP
SERIAL NO. 7Y1 TO 7Y290 INCLUSIVE
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
7N1292 CYLINDER BLOCK COVER GROUP
S/N 7Y291-UP
CYLINDER BLOCK GP
2P-6560 CYLINDER BLOCK GP
2P6560 CYLINDER BLOCK GROUP*R
SERIAL NO. 7Y1 TO 7Y290 INCLUSIVE
2P8776-PAGE 11
CYLINDER BLOCK GP
7N-8016 CYLINDER BLOCK GP
7N8016 CYLINDER BLOCK GROUP*R
SERIAL NO. 7Y291 TO 7Y743 INCLUSIVE
6N8124-PAGE 11A
CYLINDER BLOCK GP
7N-8016 CYLINDER BLOCK GP
7N8016 CYLINDER BLOCK GROUP*R
S/N 7Y744-UP
7N6550-PAGE 11B
CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
8N5286 CYLINDER BLOCK GROUP*R
7N6550-PAGE 11B
CYLINDER BLOCK AS
2P-8776 CYLINDER BLOCK AS
2P8776 CYLINDER BLOCK ASSEMBLY
S/N 7Y1-290
PART OF 2P6560 CYLINDER BLOCK
CYLINDER BLOCK GP
6N-8124 CYLINDER BLOCK GP
6N8124 CYLINDER BLOCK ASSEMBLY
S/N 7Y291-743
PART OF 7N8016 CYLINDER BLOCK
CYLINDER BLOCK AS
7N-6550 CYLINDER BLOCK AS
7N6550 CYLINDER BLOCK ASSEMBLY
S/N 7Y744-UP
PART OF 7N8016, 8N5286 CYLINDER BLOCK
FIELD REPLACEMENT ORDER 1N3576-PAGE 11C & 6N7727 CYLINDER BLOCK KIT
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
1N3576 CYLINDER BLOCK GROUP-FIELD INSTALLATION
S/N 7Y744-UP
PROVIDES FIELD REPLACEMENT FOR 7N6550-PAGE 11B
8N-6273 KIT-BLOCK HARDWARE
8N6273 KIT-BLOCK HARDWARE-FIELD INSTALLATION
S/N 7Y1-290
PROVIDES THE NECESSARY HARDWARE TO ALLOW A COUNTERBORE
3306 ENGINE TO BE SERVICED WITH A SPACER PLATE BLOCK
CYLINDER HEAD GP
CYLINDER HEAD GP
7N-4049 CYLINDER HEAD GP
7N4049 CYLINDER HEAD GROUP
S/N 7Y1-283
CYLINDER HEAD GP
7N-4049 CYLINDER HEAD GP
7N4049 CYLINDER HEAD GROUP
S/N 7Y284-290
CYLINDER HEAD GP
8N-4800 CYLINDER HEAD GP
8N4800 CYLINDER HEAD GROUP
S/N 7Y291-2078
CYLINDER HEAD GP
7W-7506 CYLINDER HEAD GP
7W7506 CYLINDER HEAD GP-*R
S/N 7Y2079-UP
CYLINDER HEAD GP
9Y-7896 CYLINDER HEAD GP
9Y7896 CYLINDER HEAD GP
S/N 7Y2856-UP
CYLINDER HEAD AS
9Y-2638 CYLINDER HEAD AS
9Y2638 CYLINDER HEAD AS
PART OF 9Y3640 & 7E1285 CYLINDER HEAD
FOR FIELD REPLACEMENT ORDER 6I2402-PAGE 15C.01.01
CYLINDER HEAD GP
6I-2402 CYLINDER HEAD GP
6I2402 CYLINDER HEAD GP
FIELD REPLACEMENT FOR 9Y2638-PAGE 15C.01.00
CYLINDER HEAD GP
9Y-3640 CYLINDER HEAD GP
9Y3640 CYLINDER HEAD GP
9Y2638-PAGE 15C.01.00
CYLINDER HEAD GP
7E-1285 CYLINDER HEAD GP
7E1285 CYLINDER HEAD GP
9Y2638-PAGE 15C.01.00
FASTENER GP-CYLINDER HEAD
2P-6546 FASTENER GP-CYLINDER HEAD
2P6546 CYLINDER HEAD FASTENER GP
S/N 7Y1-290
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
7N9536 CYLINDER HEAD FASTENER GP
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
2P6530 CYLINDER HEAD COVER GP
FASTENER GP-CYLINDER HEAD
7W-7495 FASTENER GP-CYLINDER HEAD
7W7495 FASTENER GP-CYLINDER HEAD
S/N 7Y2079-UP
DAMPER GP
DAMPER GP
3N-2885 DAMPER GP
3N2885 DAMPER GROUP
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
7N-6110 DRIVE GP-ACCESSORY
7N6110 DRIVE GP-ACCESSORY
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
3N-7019 DRIVE GP-FAN
3N7019 DRIVE GP-FAN
TYPE 2
FOR USE WITH 7N9517 RADIATOR
AN ATTACHMENT
DRIVE GP-FAN
3N-7019 DRIVE GP-FAN
3N7019 DRIVE GP-FAN
TYPE 1
FOR USE WITH 7N9517 RADIATOR
AN ATTACHMENT
DRIVE GP-FAN
3N-7210 DRIVE GP-FAN
3N7210 FAN DRIVE GROUP
FOR USE WITH FAN PULLEY, ALTERNATOR OR BELT TIGHTENER
AN ATTACHMENT
ADAPTER GP-FAN
3N-5658 ADAPTER GP-FAN
3N5658 ADAPTER GP-FAN
AN ATTACHMENT
ADAPTER GP-FAN
5N-7147 ADAPTER GP-FAN
5N7147 FAN ADAPTER GROUP
FOR USE WITH 7N9517 RADIATOR AND 3N7211 FAN PULLEY
AN ATTACHMENT
ADAPTER GP-FAN
5N-2087 ADAPTER GP-FAN
5N2087 FAN ADAPTER GROUP
FOR USE ONLY WITH 7N9517 RADIATOR
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
7N-4137 FLYWHEEL GP
7N4137 FLYWHEEL GP
AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
2P-9642 GEAR GP-FRONT
2P9642 FRONT TIMING GEAR GROUP
S/N 7Y1-520
GEAR GP-FRONT
2P-9642 GEAR GP-FRONT
2P9642 FRONT TIMING GEAR GROUP
S/N 7Y521-647
GEAR GP-FRONT
2P-9642 GEAR GP-FRONT
2P9642 FRONT TIMING GEAR GROUP
S/N 7Y648-UP
INDICATOR GP-TIMING
7N-4312 INDICATOR GP-TIMING
7N4312 INDICATOR GP-TIMING
AN ATTACHMENT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
7N-1747 HOUSING GP-FLYWHEEL
7N1747 FLYWHEEL HOUSING GROUP
S/N 7Y1-427
HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
8N2395 FLYWHEEL HOUSING GROUP
S/N 7Y428-UP
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
7N-4314 COVER GP-FRONT HOUSING
7N4314 FRONT HOUSING COVER GROUP
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
8N0303 HOUSING GP-FRONT
HOUSING GP-FRONT
7N-3821 HOUSING GP-FRONT
7N3821 FRONT HOUSING GP
S/N 7Y1-479
HOUSING GP-FRONT
7N-3821 HOUSING GP-FRONT
7N3821 HOUSING GP-FRONT
S/N 7Y480-UP
FASTENER GP-FRONT HOUSING
3N-2887 FASTENER GP-FRONT HOUSING
3N2887 FRONT HOUSING FASTENER GROUP
S/N 7Y1062-UP
FASTENER GP-FRONT HOUSING
3N-2887 FASTENER GP-FRONT HOUSING
3N2887 FRONT HOUSING FASTENER GROUP
S/N 7Y1-1061
LIFTING GP-ENGINE
LIFTING GP
7N-9122 LIFTING GP
7N9122 ENGINE LIFTING GROUP
S/N 7Y827-920
LIFTING GP
8N-3157 LIFTING GP
8N3157 ENGINE LIFTING GROUP
S/N 7Y1-746 & 7Y921-UP
LIFTING GP
1W-5569 LIFTING GP
1W5569 ENGINE LIFTING GROUP
S/N 7Y747-826
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
7N-1268 SUPPORT GP-ENGINE
7N1268 ENGINE SUPPORT GROUP-REAR
AN ATTACHMENT
SUPPORT GP-ENGINE
3N-2883 SUPPORT GP-ENGINE
3N2883 ENGINE SUPPORT GROUP-FRONT
FOR USE WITH RADIATOR AND MOBILE EQUIPMENT AR
SUPPORT GP-ENGINE
1W-5122 SUPPORT GP-ENGINE
1W5122 ENGINE SUPPORT GP-REAR
AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
3N-2899 PAN GP-OIL
3N2899 OIL PAN GROUP
S/N 7Y1255-1833
PAN GP-OIL
3N-2899 PAN GP-OIL
3N2899 OIL PAN GROUP
S/N 7Y1-1254
PAN GP-OIL
1W-0592 PAN GP-OIL
1W0592 OIL PAN GROUP
S/N 7Y1834-UP
PISTON & ROD GP
PISTON & ROD GP
7L-0472 PISTON & ROD GP
7L0472 CONNECTING ROD & PISTON GROUP-10.5:1 RATIO
S/N 7Y438-3663
PISTON & ROD GP
7L-0472 PISTON & ROD GP
7L0472 CONNECTING ROD AND PISTON GROUP-10.5:1 RATIO
S/N 7Y1-437
PISTON & ROD GP
4P-2698 PISTON & ROD GP
4P2698 PISTON & ROD GP-10.5:1 RATIO
S/N 7Y3664-UP
PISTON & ROD GP
8L-4446 PISTON & ROD GP
8L4446 CONNECTING ROD AND PISTON GROUP-8:1 RATIO
S/N 7Y438-3662
PISTON & ROD GP
4P-2699 PISTON & ROD GP
4P2699 PISTON & ROD GP-8:1 RATIO
S/N 7Y3663-UP
POWER TAKE-OFF GP
POWER TAKE-OFF GP-REAR
2W-4903 POWER TAKE-OFF GP-REAR
2W4903 REAR POWER TAKE-OFF GROUP-CLUTCH
2W4902-PAGE 96F
AN ATTACHMENT
POWER TAKE-OFF GP-REAR
3N-9098 POWER TAKE-OFF GP-REAR
3N9098 REAR POWER TAKE-OFF GROUP-CLUTCH
3N9097-PAGE 96D
AN ATTACHMENT
POWER TAKE-OFF GP-REAR
4P-3074 POWER TAKE-OFF GP-REAR
4P3074 POWER TAKE-OFF GP-REAR-CLUTCH
4P3073-PAGE 96F.01
AN ATTACHMENT
POWER TAKE-OFF GP-REAR
2W-4907 POWER TAKE-OFF GP-REAR
2W4907 POWER TAKE-OFF GP-REAR
2W4906-PAGE 96B
FOR USE ON FIRE PUMP ENGINE
AN ATTACHMENT
SUPPORT GP-POWER TAKE-OFF
5N-1678 SUPPORT GP-POWER TAKE-OFF
5N1678 SUPPORT GP-POWER TAKE-OFF
FOR USE WITH 2W4907 REAR POWER TAKE-OFF
NOT FOR USE WITH FUEL TANK BASES
AN ATTACHMENT
SUPPORT GP-POWER TAKE-OFF
5N-1933 SUPPORT GP-POWER TAKE-OFF
5N1933 SUPPORT GROUP-POWER TAKE-OFF-CLUTCH
FOR USE WITH 2W4903 REAR POWER TAKE-OFF
AN ATTACHMENT
PULLEY GP
PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
3N6128 CRANKSHAFT PULLEY GROUP
2 GROVE
NOT FOR USE WITH STUB SHAFT
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
3N-2884 PULLEY GP-CRANKSHAFT
3N2884 CRANKSHAFT PULLEY GROUP
FOR USE WITH MOBILE EQUIPMENT
PULLEY GP-FAN DRIVE
3N-7211 PULLEY GP-FAN DRIVE
3N7211 FAN PULLEY GROUP
FOR USE WITH 3N7210 FAN DRIVE
AN ATTACHMENT
PULLEY GP-FAN DRIVE
3N-5626 PULLEY GP-FAN DRIVE
3N5626 PULLEY GP-FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
3N-5627 PULLEY GP-FAN DRIVE
3N5627 FAN PULLEY GROUP
FOR USE WITH 7N9517 RADIATOR
SHAFT GP-STUB
SHAFT GP-STUB
6L-2692 SHAFT GP-STUB
6L2692 STUB SHAFT GROUP-REAR MOUNTED
AN ATTACHMENT
SHAFT GP-MARINE GEAR
6L-2691 SHAFT GP-MARINE GEAR
6L2691 STUB SHAFT GROUP-FRONT MOUNTED
NOT FOR USE WITH CRANKSHAFT AUXILIARY PULLEY GROUP
AN ATTACHMENT
SERPENTINE/V-BELTS
VEE BELT SET
VEE BELT SET
FOR USE WITH 33 IN. BLOWER FAN, 3N5627 FAN PULLEY,
ALTERNATOR OR BELT TIGHTENER
AN ATTACHMENT
GUARD GP-BELT
1W-1525 GUARD GP-BELT
1W1525 BELT GUARD GROUP-ALTERNATOR
AN ATTACHMENT
VALVE MECHANISM GP
VALVE MECHANISM GP
2P-6526 VALVE MECHANISM GP
2P6526 VALVE MECHANISM GROUP
S/N 7Y276-290
VALVE MECHANISM GP
2P-6526 VALVE MECHANISM GP
2P6526 VALVE MECHANISM GROUP
S/N 7Y1-275
VALVE MECHANISM GP
7N-8026 VALVE MECHANISM GP
7N8026 VALVE MECHANISM GROUP
S/N 7Y291-UP
VALVE MECHANISM GP
7W-7494 VALVE MECHANISM GP
7W7494 VALVE MECHANISM GP
S/N 7Y2079-UP
7W7493-PAGE 17A.02
VALVE MECHANISM GP
4W-9175 VALVE MECHANISM GP
4W9175 VALVE MECHANISM GP
S/N 7Y1660-2078
4W9174-PAGE 17A.01
VALVE MECHANISM GP
4W-9174 VALVE MECHANISM GP
4W9174 VALVE MECHANISM GP
PART OF 4W9175 VALVE MECHANISM
VALVE MECHANISM GP
7W-7493 VALVE MECHANISM GP
7W7493 MECHANISM GP-VALVE
PART OF 7W7494 VALVE MECHANISM
VALVE MECHANISM GP
7E-1556 VALVE MECHANISM GP
7E1556 VALVE MECHANISM GP
7C3795-PAGE 17A.04
VALVE MECHANISM GP
7C-3795 VALVE MECHANISM GP
7C3795 VALVE-MECHANISM GP
PART OF 7E1556 VALVE MECHANISM
COVER GP-VALVE MECHANISM
3N-2891 COVER GP-VALVE MECHANISM
3N2891 VALVE MECHANISM COVER GROUP
COVER GP-VALVE MECHANISM
9Y-2288 COVER GP-VALVE MECHANISM
9Y2288 COVER GP-VALVE MECHANISM
S/N 7Y2835-UP
COVER GP-VALVE MECHANISM
7W-7540 COVER GP-VALVE MECHANISM
7W7540 COVER GP-VALVE MECHANISM
S/N 7Y2079-2834
COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM
8N4745 COVER GP-VALVE MECHANISM

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Disassembly and Assembly
Balancer Shafts (3304)
3304 & 3306 NATURAL GAS ENGINES
Balancer Shaft Bearings (3304)
3304 & 3306 NATURAL GAS ENGINES
Engine Balancer Shaft - Remove and Install
G3304 and G3306 Engines
Specifications
Belt Tension Chart
G3304 and G3306 Engines
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
New 8T2998 Lubricant Available
1986/03/01
New Camshafts Used; Camshaft Installation Kits Available
1989/04/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Specifications
Camshaft
G3304 and G3306 Engines
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3304 and G3306 Engines
Disassembly and Assembly
Camshaft
3306 NATURAL GAS ENGINE
Camshaft Bearings
3306 NATURAL GAS ENGINE
Camshaft
3304 & 3306 NATURAL GAS ENGINES
Camshaft Bearings
3304 & 3306 NATURAL GAS ENGINES
Camshaft - Remove
G3304 and G3306 Engines
Camshaft - Install
G3304 and G3306 Engines
Camshaft Bearings - Remove
G3304 and G3306 Engines
Camshaft Bearings - Install
G3304 and G3306 Engines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Specifications
Seal Adapter (Front)
G3304 and G3306 Engines
Operation and Maintenance Manual
Power Take-Off Clutch - Check/Adjust/Lubricate
G3300 Engines
Special Instruction
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Service Magazine
New Clutches For Rear Power Take-Off{3055,3054}
1983/02/14
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Operation and Maintenance Manual
Driven Equipment - Inspect/Replace/Lubricate
G3300 Engines
Driven Equipment - Check
G3300 Engines
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/03/12
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Crankshaft Assemblies
1982/11/10
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Group Used
1984/07/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
New Crankshaft Counterweight Bolt And Washer Used
1989/11/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
An Improved Front Crankshaft Seal Is Used on G3300 Engines {1160, 1161}
2014/07/11
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3300 Engines
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE FRONT CRANKSHAFT SEAL ON CERTAIN G3300 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE FRONT CRANKSHAFT SEAL ON CERTAIN G3300 ENGINES
Service Letter-Americas
Specifications
Crankshaft Pulley
G3304 and G3306 Engines
Crankshaft Wear Sleeves and Seals
G3304 and G3306 Engines
Crankshaft
G3304 and G3306 Engines
Connecting Rod and Main Bearing Journals
G3304 and G3306 Engines
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3304 and G3306 Engines
Connecting Rod Bearings - Inspect
G3304 and G3306 Engines
Main Bearings - Inspect
G3304 and G3306 Engines
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3306 NATURAL GAS ENGINE
Crankshaft Main Bearings
3306 NATURAL GAS ENGINE
Crankshaft Rear Seal And Wear Sleeve
3306 NATURAL GAS ENGINE
Crankshaft
3306 NATURAL GAS ENGINE
Vibration Damper and Pulley
3304 & 3306 NATURAL GAS ENGINES
Crankshaft Front Seal and Wear Sleeve
3304 & 3306 NATURAL GAS ENGINES
Crankshaft Main Bearings
3304 & 3306 NATURAL GAS ENGINES
Crankshaft Rear Seal and Wear Sleeve
3304 & 3306 NATURAL GAS ENGINES
Crankshaft (3306)
3304 & 3306 NATURAL GAS ENGINES
Crankshaft (3304)
3304 & 3306 NATURAL GAS ENGINES
Crankshaft Front Seal and Wear Sleeve - Remove
G3304 and G3306 Engines
Crankshaft Front Seal and Wear Sleeve - Install
G3304 and G3306 Engines
Crankshaft Main Bearings - Remove
G3304 and G3306 Engines
Crankshaft Main Bearings - Install
G3304 and G3306 Engines
Crankshaft Rear Seal and Wear Sleeve - Remove
G3304 and G3306 Engines
Crankshaft Rear Seal and Wear Sleeve - Install
G3304 and G3306 Engines
Crankshaft - Remove
G3304 and G3306 Engines
Crankshaft - Install
G3304 and G3306 Engines
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material
1982/10/20
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Connecting Rod And Main Bearings Used
1984/04/11
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Oil Seal Used Between Oil Filter Base And Cylinder Block
1988/09/01
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks
1990/12/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
Be Sure To Use Correct Cup Plugs On OR2077, OR2554, And OR3258 Remanufactured 3304 And 3306 Short Blocks
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Remanufactured Cylinder Packs Available
1993/11/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Operation and Maintenance Manual
Cylinder Pressure - Measure/Record
G3300 Engines
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Liner
G3304 and G3306 Engines
Connecting Rod
G3304 and G3306 Engines
Piston and Rings
G3304 and G3306 Engines
Cylinder Block
G3304 and G3306 Engines
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3304 and G3306 Engines
Cylinder Block
G3304 and G3306 Engines
Main Bearings - Inspect
G3304 and G3306 Engines
Cylinder Liner Projection
G3304 and G3306 Engines
Disassembly and Assembly
Crankshaft Main Bearings
3306 NATURAL GAS ENGINE
Cylinder Liners
3306 NATURAL GAS ENGINE
Camshaft Bearings
3306 NATURAL GAS ENGINE
Crankshaft
3306 NATURAL GAS ENGINE
Crankshaft Main Bearings
3304 & 3306 NATURAL GAS ENGINES
Valve Seat Inserts
3304 & 3306 NATURAL GAS ENGINES
Spacer Plate
3304 & 3306 NATURAL GAS ENGINES
Cylinder Liners
3304 & 3306 NATURAL GAS ENGINES
Crankshaft (3306)
3304 & 3306 NATURAL GAS ENGINES
Camshaft Bearings
3304 & 3306 NATURAL GAS ENGINES
Connecting Rod Bearings - Remove and Install
G3304 and G3306 Engines
Crankshaft Main Bearings - Remove
G3304 and G3306 Engines
Crankshaft Main Bearings - Install
G3304 and G3306 Engines
Cylinder Liner - Remove
G3304 and G3306 Engines
Cylinder Liner - Install
G3304 and G3306 Engines
Camshaft Bearings - Remove
G3304 and G3306 Engines
Camshaft Bearings - Install
G3304 and G3306 Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Oil Seal Used Between Oil Filter Base And Cylinder Block {1306}
1988/08/29
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Remanufactured Cylinder Packs Available{1239}
1993/11/29
Engine News
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Improved Cylinder Heads And Valve Covers Used
1984/09/12
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Bleed Holes On Parts Service Cylinder Heads
1985/03/01
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
1985/06/01
Use Correct Valves When Rebuilding Engines
1985/09/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Competitive Report: Caterpillar Cylinder Heads vs. Ghinassi Cylinder Heads
1986/11/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention
1992/02/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
New Cylinder Head Group Provides Lower Valve Guide Temperatures
1992/08/01
New Cylinder Head Groups Provides Lower Valve Guide Temperatures
1992/09/01
New Remanufactured Cylinder Head Groups Provide Improved Cooling Around The Exhaust Valve Guides {1101,1104,1105}
1995/04/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3300 Engines
Special Instruction
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CFEL
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CSARL
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Americas
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Specifications
Cylinder Head
G3304 and G3306 Engines
Cylinder Head Valves
G3304 and G3306 Engines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
G3304 and G3306 Engines
Disassembly and Assembly
Cylinder Head Assembly
3306 NATURAL GAS ENGINE
Valves
3306 NATURAL GAS ENGINE
Valve Guides
3306 NATURAL GAS ENGINE
Valve Seat Inserts
3306 NATURAL GAS ENGINE
Water Directors
3306 NATURAL GAS ENGINE
Cylinder Head Assembly (3306)
3304 & 3306 NATURAL GAS ENGINES
Cylinder Head Assembly (3304)
3304 & 3306 NATURAL GAS ENGINES
Valves
3304 & 3306 NATURAL GAS ENGINES
Valve Guides
3304 & 3306 NATURAL GAS ENGINES
Water Directors
3304 & 3306 NATURAL GAS ENGINES
Valve Guides - Remove and Install
G3304 and G3306 Engines
Valve Seat Inserts - Remove and Install
G3304 and G3306 Engines
Water Directors - Remove and Install
G3304 and G3306 Engines
Inlet and Exhaust Valves - Remove and Install
G3304 and G3306 Engines
Cylinder Head - Remove
G3304 and G3306 Engines
Cylinder Head - Install
G3304 and G3306 Engines
Service Magazine
Special Studs And Nuts Available For Exhaust Manifolds On Engines Used In Heavy Load Conditions{1059,1101}
1981/03/09
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Bleed Holes On Parts Service Cylinder Heads{1100,1101}
1985/02/18
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}
1985/05/13
Improvements Made To Spark Ignited Engines{1100,1104,1105,1207}
1985/08/19
Use Correct Valves When Rebuilding Engines{1105,1103}
1985/09/02
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Cylinder Head Group Provides Lower Valve Guide Temperatures {1100,1104,1112,1123}
1992/08/24
New Cylinder Head Groups Provides Lower Valve Guide Temperatures{1100,1104,1112,1123}
1992/10/05
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3300 Engines
Testing and Adjusting
Vibration Damper - Check
G3304 and G3306 Engines
Disassembly and Assembly
Vibration Damper And Pulley
3306 NATURAL GAS ENGINE
Vibration Damper and Pulley
3304 & 3306 NATURAL GAS ENGINES
Vibration Damper and Pulley - Remove
G3304 and G3306 Engines
Vibration Damper and Pulley - Install
G3304 and G3306 Engines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Disassembly and Assembly
Accessory Drive
3306 NATURAL GAS ENGINE
Accessory Drive (3306), Service Meter
3304 & 3306 NATURAL GAS ENGINES
Accessory Drive - Remove and Install
G3304 and G3306 Engines
Accessory Drive - Disassemble
G3304 and G3306 Engines
Accessory Drive - Assemble
G3304 and G3306 Engines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Improvements Made To Spark Ignited Engines{1100,1104,1105,1207}
1985/08/19
Disassembly and Assembly
Accessory Drive
3306 NATURAL GAS ENGINE
Accessory Drive (3306), Service Meter
3304 & 3306 NATURAL GAS ENGINES
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Improvements Made To Spark Ignited Engines{1100,1104,1105,1207}
1985/08/19
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Engine News
Spring Pins No Longer Used In Water Pump Drive Gear
1981/09/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Service Letter-NACD
A NEW FLYWHEEL NEEDS TO BE INSTALLED ON CERTAIN G3304 AND G3306 GAS ENGINES
A NEW FLYWHEEL NEEDS TO BE INSTALLED ON CERTAIN G3304 AND G3306 GAS ENGINES
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Flywheel Housing
G3304 and G3306 Engines
Testing and Adjusting
Flywheel - Inspect
G3304 and G3306 Engines
Disassembly and Assembly
Flywheel
3306 NATURAL GAS ENGINE
Flywheel Housing
3306 NATURAL GAS ENGINE
Flywheel
3304 & 3306 NATURAL GAS ENGINES
Flywheel - Remove and Install
G3304 and G3306 Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
New Front Housing Assembly And Gaskets Used
1980/12/10
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque
1993/06/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Gear Group (Front)
G3304 and G3306 Engines
Disassembly and Assembly
Timing Gear Cover
3306 NATURAL GAS ENGINE
Timing Gears
3306 NATURAL GAS ENGINE
Timing Gear Plate
3306 NATURAL GAS ENGINE
Crankshaft Front Seal and Wear Sleeve
3304 & 3306 NATURAL GAS ENGINES
Timing Gear Cover
3304 & 3306 NATURAL GAS ENGINES
Timing Gears
3304 & 3306 NATURAL GAS ENGINES
Timing Gear Plate
3304 & 3306 NATURAL GAS ENGINES
Timing Gears - Remove
G3304 and G3306 Engines
Timing Gears - Install
G3304 and G3306 Engines
Timing Gear Plate - Remove and Install
G3304 and G3306 Engines
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/03/12
New Rear Crankshaft Seal Group Used
1984/07/11
Specifications
Flywheel Housing
G3304 and G3306 Engines
Testing and Adjusting
Flywheel Housing - Inspect
G3304 and G3306 Engines
Disassembly and Assembly
Flywheel Housing
3306 NATURAL GAS ENGINE
Crankshaft Rear Seal And Wear Sleeve
3306 NATURAL GAS ENGINE
Crankshaft Rear Seal and Wear Sleeve
3304 & 3306 NATURAL GAS ENGINES
Flywheel Housing
3304 & 3306 NATURAL GAS ENGINES
Flywheel Housing - Remove
G3304 and G3306 Engines
Flywheel Housing - Install
G3304 and G3306 Engines
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Engine News
New Front Housing Assembly And Gaskets Used
1980/12/10
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Crankshaft Wear Sleeves and Seals
G3304 and G3306 Engines
Housing (Front)
G3304 and G3306 Engines
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3306 NATURAL GAS ENGINE
Timing Gear Cover
3306 NATURAL GAS ENGINE
Timing Gear Plate
3306 NATURAL GAS ENGINE
Crankshaft Front Seal and Wear Sleeve
3304 & 3306 NATURAL GAS ENGINES
Timing Gear Cover
3304 & 3306 NATURAL GAS ENGINES
Timing Gears
3304 & 3306 NATURAL GAS ENGINES
Timing Gear Plate
3304 & 3306 NATURAL GAS ENGINES
Timing Gear Cover - Remove and Install
G3304 and G3306 Engines
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication
1979/08/22
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/03/12
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
New Rear Crankshaft Seal Group Used
1984/07/11
Competitive Report: Caterpillar Cylinder Heads vs. Ghinassi Cylinder Heads
1986/11/01
New Camshafts Used; Camshaft Installation Kits Available
1989/04/01
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
New Three-Ring Pistons And New Rings Used In New Piston And Rod Groups To Provide Improved Oil Control
1991/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-CFEL
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-CSARL
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Americas
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Asia
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-APD
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Product Support Program For Valve Seat Wear On Certain G3304 And G3306 Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Special Studs And Nuts Available For Exhaust Manifolds On Engines Used In Heavy Load Conditions{1059,1101}
1981/03/09
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Clutches For Rear Power Take-Off{3055,3054}
1983/02/14
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Improvements Made To Spark Ignited Engines{1100,1104,1105,1207}
1985/08/19
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Piston Oil Ring Gives Better Oil Control{1215}
1986/10/13
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Water Pump Gives More Pressure{1361}
1978/09/04
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
New Three-Ring Pistons And New Rings Used In New Piston And Rod Groups To Provide Improved Oil Control{1214,1215}
1991/06/17
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention{1123}
1992/02/03
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Operation and Maintenance Manual
Engine Mounts - Check
G3300 Engines
Special Instruction
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Disassembly and Assembly
Front Support
3306 NATURAL GAS ENGINE
Front Support
3304 & 3306 NATURAL GAS ENGINES
Service Magazine
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Technical Information Bulletin
3306 Engine Oil Pan Plate Leaks
3306 Engine Oil Pan Plate Leaks
Specifications
Engine Oil Pan
G3304 and G3306 Engines
Disassembly and Assembly
Oil Pan
3306 NATURAL GAS ENGINE
Oil Pan Plate
3306 NATURAL GAS ENGINE
Oil Pan
3304 & 3306 NATURAL GAS ENGINES
Oil Pan Plate
3304 & 3306 NATURAL GAS ENGINES
Engine Oil Pan - Remove
G3304 and G3306 Engines
Engine Oil Pan - Install
G3304 and G3306 Engines
Engine Oil Pan Plate - Remove and Install
G3304 and G3306 Engines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Engine News
"Off-Size" Bearing Kits Available
1991/10/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
Procedure For Cleaning Engine Bolts {1000}
2002/03/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material
1982/10/20
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Remanufactured Connecting Rod Assemblies
1984/02/22
New Connecting Rod And Main Bearings Used
1984/04/11
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
New Piston Oil Ring Gives Better Oil Control
1986/11/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Oil Control Piston Ring Used In 3300 Family Of Engines
1990/04/01
New Three-Ring Pistons And New Rings Used In New Piston And Rod Groups To Provide Improved Oil Control
1991/07/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New 8.0:1 And 10.5:1 Compression Ratio Rod And Piston Groups Include New Center Piston Ring To Improve Oil Life {1215}
1995/12/20
Changes to Specifications "Piston and Rings" {1214, 1215}
2006/01/23
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
2009/01/05
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
Piston Rings On Certain G3304 And G3306 Engines Need To Be Inspected
Piston Rings On Certain G3304 And G3306 Engines Need To Be Inspected
Service Letter-CSARL
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Connecting Rod
G3304 and G3306 Engines
Piston and Rings
G3304 and G3306 Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3304 and G3306 Engines
Compression
G3304 and G3306 Engines
Connecting Rod - Inspect
G3304 and G3306 Engines
Connecting Rod Bearings - Inspect
G3304 and G3306 Engines
Engine Crankcase Pressure (Blowby) - Test
G3304 and G3306 Engines
Disassembly and Assembly
Connecting Rod Bearings
3306 NATURAL GAS ENGINE
Pistons
3306 NATURAL GAS ENGINE
Connecting Rod Bearings
3304 & 3306 NATURAL GAS ENGINES
Pistons
3304 & 3306 NATURAL GAS ENGINES
Cylinder Liners
3304 & 3306 NATURAL GAS ENGINES
Piston and Connecting Rods - Remove
G3304 and G3306 Engines
Piston and Connecting Rods - Install
G3304 and G3306 Engines
Piston and Connecting Rods - Disassemble
G3304 and G3306 Engines
Piston and Connecting Rods - Assemble
G3304 and G3306 Engines
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Piston Oil Ring Gives Better Oil Control{1215}
1986/10/13
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
New Three-Ring Pistons And New Rings Used In New Piston And Rod Groups To Provide Improved Oil Control{1214,1215}
1991/06/17
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Remanufactured Cylinder Packs Available{1239}
1993/11/29
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Operation and Maintenance Manual
Power Take-Off Clutch - Check/Adjust/Lubricate
G3300 Engines
Special Instruction
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Service Magazine
New Clutches For Rear Power Take-Off{3055,3054}
1983/02/14
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3300 Engines
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Crankshaft Pulley
G3304 and G3306 Engines
Disassembly and Assembly
Vibration Damper And Pulley
3306 NATURAL GAS ENGINE
Vibration Damper and Pulley
3304 & 3306 NATURAL GAS ENGINES
Vibration Damper and Pulley - Remove
G3304 and G3306 Engines
Vibration Damper and Pulley - Install
G3304 and G3306 Engines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Engine News
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group
1987/07/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Special Instruction
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Replace
G3300 Engines
Alternator and Fan Belts - Inspect/Adjust/Replace
G3300 Engines
Specifications
Belt Tension Chart
G3304 and G3306 Engines
Testing and Adjusting
Belt Tension Chart
G3304 and G3306 Engines
Engine News
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication
1979/08/22
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Improved Cylinder Heads And Valve Covers Used
1984/09/12
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
1985/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Competitive Report: Caterpillar Cylinder Heads vs. Ghinassi Cylinder Heads
1986/11/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
7S3161 Valve Lifter Has Three Different Designs
1991/10/01
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention
1992/02/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
G3300 Engines
Engine Valve Lash - Inspect/Adjust
G3300 Engines
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Valve Mechanism
G3304 and G3306 Engines
Valve Cover
G3304 and G3306 Engines
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Information Release Memo
REMANUFACTURED LIFTERS FOR THE D &amp; G SERIES ENGINES
REMANUFACTURED LIFTERS FOR THE D & G SERIES ENGINES
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
G3304 and G3306 Engines
Engine Valve Lash - Inspect/Adjust
G3304 and G3306 Engines
Disassembly and Assembly
Valve Cover
3306 NATURAL GAS ENGINE
Rocker Shaft And Push Rods
3306 NATURAL GAS ENGINE
Rocker Shaft
3306 NATURAL GAS ENGINE
Valve Lifters
3306 NATURAL GAS ENGINE
Valve Cover
3304 & 3306 NATURAL GAS ENGINES
Rocker Shaft and Push Rods
3304 & 3306 NATURAL GAS ENGINES
Rocker Shaft
3304 & 3306 NATURAL GAS ENGINES
Valves
3304 & 3306 NATURAL GAS ENGINES
Valve Guides
3304 & 3306 NATURAL GAS ENGINES
Valve Seat Inserts
3304 & 3306 NATURAL GAS ENGINES
Valve Lifters
3304 & 3306 NATURAL GAS ENGINES
Valve Cover - Remove and Install
G3304 and G3306 Engines
Valve Lifter - Remove
G3304 and G3306 Engines
Rocker Shaft and Push Rod - Remove
G3304 and G3306 Engines
Rocker Shaft and Push Rod - Install
G3304 and G3306 Engines
Rocker Shaft - Disassemble
G3304 and G3306 Engines
Rocker Shaft - Assemble
G3304 and G3306 Engines
Valve Lifter - Install
G3304 and G3306 Engines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Cast Iron Valve Rocker Arm Groups Provide Improved Bearing Retention{1123}
1992/02/03
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Cylinder Head Group Provides Lower Valve Guide Temperatures {1100,1104,1112,1123}
1992/08/24
New Cylinder Head Groups Provides Lower Valve Guide Temperatures{1100,1104,1112,1123}
1992/10/05
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Caterpillar G3306, Construction
133,280 
Caterpillar G3306, Construction
- Stationary Generator Sets
HOLT CAT
Caterpillar G3306, Construction
90,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3306, Construction
22,500 
Caterpillar G3306, Construction
- Petroleum Engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar G3306, Construction
55,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
CATERPILLAR G3306 2014
 
CATERPILLAR G3306 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.