G3306 ENGINE 07Y00001-04278 ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

GAS ENGINE G3306 GAS ENGINE 07Y
G3306 ENGINE 07Y00001-04278 SEBP1213 G3306 07Y (1978)

Parts group G3306:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING

3N-2708 ALTERNATOR GP-CHARGING

3N2708 ALTERNATOR GP
12 VOLT, 55 AMPERE. TYPE 1
2N7759-PAGE 74C, 2L9808-PAGE 74D
FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2708 ALTERNATOR GP-CHARGING

3N2708 ALTERNATOR GP
12 VOLT, 55 AMPERE. TYPE 2
2N7759-PAGE 74C, 2L9808-PAGE 74D
FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2708 ALTERNATOR GP-CHARGING

3N2708 ALTERNATOR GP
12 VOLT, 55 AMPERE. TYPE 3
6T1396-PAGE 74A.03, 2L9808-PAGE 74D
FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2708 ALTERNATOR GP-CHARGING

3N2708 ALTERNATOR GP
12 VOLT, 55 AMPERE. TYPE 4
6T1396-PAGE 74A.03
FOR USE WITH FAN DRIVE
AN ATTACHMENT

6T-1396 ALTERNATOR GP-CHARGING

6T1396 ALTERNATOR GP*R
12 VOLT, 55 AMPERE
PART OF 3N2708, 3N2709, 1004510 ALTERNATORS
AN ATTACHMENT

6T-1395 ALTERNATOR GP-CHARGING

6T1395 ALTERNATOR GP*R
24 VOLT, 35 AMPERE
PART OF 3N2706, 3N2707, 1004511 ALTERNATORS
AN ATTACHMENT

3N-2709 ALTERNATOR GP-CHARGING

3N2709 ALTERNATOR GP
12 VOLT, 55 AMPERE. TYPE 1
2N7759-PAGE 74C
NOT FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2709 ALTERNATOR GP-CHARGING

3N2709 ALTERNATOR GP
12 VOLT, 55 AMPERE. TYPE 2
2N7759-PAGE 74C
NOT FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2709 ALTERNATOR GP-CHARGING

3N2709 ALTERNATOR GP
12 VOLT, 55 AMPERE. TYPE 3
6T1396-PAGE 74A.03, 2L9808-PAGE 74D
NOT FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2709 ALTERNATOR GP-CHARGING

3N2709 ALTERNATOR GP-12 VOLT, 55 AMPERE
REPLACED BY 1004510-PAGE 74B.02.02. TYPE 4
6T1396-PAGE 74A.03
NOT FOR USE WITH FAN DRIVE. FOR USE WITH FRONT ENGINE SUPPORT
AN ATTACHMENT

100-4510 ALTERNATOR GP-CHARGING

1004510 ALTERNATOR GP-CHARGING-24 VOLT, 55 AMPERE
6T1396-PAGE 74A.03
NOT TO BE USED WITH FAN DRIVE OR POWER TAKE OFF
FOR USE WITH FRONT ENGINE SUPPORT
AN ATTACHMENT

100-4511 ALTERNATOR GP-CHARGING

1004511 ALTERNATOR GP-CHARGING-24 VOLT, 35 AMPERE
6T1395-PAGE 74A.04
CANNOT BE USED WITH PTO OR FAN DRIVE. FOR USE WITH FRONT ENGINE SUPPORT
AN ATTACHMENT

3N-2706 ALTERNATOR GP-CHARGING

3N2706 ALTERNATOR GP
24 VOLT, 35 AMPERE. TYPE 1
2N6398-PAGE 74B.06, 2L9808-PAGE 74D
FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2706 ALTERNATOR GP-CHARGING

3N2706 ALTERNATOR GP
24 VOLT, 35 AMPERE. TYPE 2
2N6398-PAGE 74B.06, 2L9808-PAGE 74D
FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2706 ALTERNATOR GP-CHARGING

3N2706 ALTERNATOR GROUP
24 VOLT, 35 AMPERE. TYPE 3
6T1395-PAGE 74A.04, 2L9808-PAGE 74D
FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2706 ALTERNATOR GP-CHARGING

3N2706 ALTERNATOR GP
24 VOLT, 35 AMPERE. TYPE 4
6T1395-PAGE 74A.04
FOR USE WITH FAN DRIVE
AN ATTACHMENT

3N-2707 ALTERNATOR GP-CHARGING

3N2707 ALTERNATOR GP
24 VOLT, 35 AMPERE. TYPE 1
2N6398-PAGE 74B.06, 2L9808-PAGE 74D
NOT FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF
AN ATTACHMENT

3N-2707 ALTERNATOR GP-CHARGING

3N2707 ALTERNATOR GROUP
24 VOLT, 35 AMPERE. TYPE 2
2N6398-PAGE 74B.06, 2L9808-PAGE 74D
NOT FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF
AN ATTACHMENT

3N-2707 ALTERNATOR GP-CHARGING

3N2707 ALTERNATOR GP
24 VOLT, 35 AMPERE. TYPE 3
6T1395-PAGE 74A.04, 2L9808-PAGE 74D
NOT FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF
AN ATTACHMENT

3N-2707 ALTERNATOR GP-CHARGING

3N2707 ALTERNATOR GP
24 VOLT, 35 AMPERE. TYPE 4
6T1395-PAGE 74A.04
NOT FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF
AN ATTACHMENT

2N-6398 ALTERNATOR AS-CHARGING

2N6398 ALTERNATOR AS
24 VOLT, 35 AMPERE
PART OF 3N2706 & 3N2707 ALTERNATORS

2N-7759 ALTERNATOR AS-CHARGING

2N7759 ALTERNATOR AS
12 VOLT, 55 AMPERE
PART OF 3N2708 & 3N2709 ALTERNATORS
AN ATTACHMENT

BATTERY GP

7L-7867 BATTERY GP

7L7867 BATTERY GROUP
12 VOLT, 240 AMPERE HOURS
AN ATTACHMENT

7L-7870 BATTERY GP

7L7870 BATTERY GROUP
24 VOLT, 120 AMPERE HOURS
AN ATACHMENT

BATTERY CHARGERS

BATTERY CHARGERS
AN ATTACHMENT

7C-1976 BATTERY GP

7C1976 BATTERY GP-LOW MAINTENANCE
24 VOLT, 67 AMPERE HOURS. TYPE 2
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT

7C-1976 BATTERY GP

7C1976 BATTERY GP-LOW MAINTENANCE
24 VOLT, 67 AMPERE HOURS. TYPE 1
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT

7C-1899 BATTERY GP

7C1899 BATTERY GP-MAINTENANCE FREE
24 VOLT, 66 AMPERE HOURS
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT

7C-1977 BATTERY GP

7C1977 BATTERY GP-LOW MAINTENANCE
24 VOLT, 92 AMPERE HOURS
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT

7C-1900 BATTERY GP

7C1900 BATTERY GP-MAINTENANCE FREE
24 VOLT, 100 AMPERE HOURS. TYPE 2
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT

7C-1900 BATTERY GP

7C1900 BATTERY GP-MAINTENANCE FREE
24 VOLT, 100 AMPERE HOURS. TYPE 1
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT

BOX GP

3N-6710 BOX GP-EXTENSION TERMINAL

3N6710 BOX GP-EXTENSION TERMINAL-RH MOUNTED
GENERATOR S/N 5CA1-UP,5DA1-UP,5EA1-UP
PART OF 3N5566 & 3N5567 BOX-GENERATOR CONNECTION
AN ATTACHMENT

CIRCUIT BREAKER GP

7W-0921 WIRING GP

7W0921 WIRING GP-SHUNT TRIP
REFER TO 4W8145 CHART PAGE 123E.02
AN ATTACHMENT

4W-8145 CHART-CIRCUIT BREAKER

4W8145 CHART-CIRCUIT BREAKER-PART 1 OF 7
GENERATOR S/N 5CA1-UP,5DA1-UP,5EA1-UP
AN ATTACHMENT

4W-8145 CHART-CIRCUIT BREAKER

4W8145 CHART-CIRCUIT BREAKER-PART 2 OF 7
GENERATOR S/N 5CA1-UP,5DA1-UP,5EA1-UP
AN ATTACHMENT

4W-8145 CHART-CIRCUIT BREAKER

4W8145 CHART-CIRCUIT BREAKER-PART 3 OF 7
GENERATOR S/N 5CA1-UP,5DA1-UP,5EA1-UP
AN ATTACHMENT

4W-8145 CHART-CIRCUIT BREAKER

4W8145 CHART-CIRCUIT BREAKER-PART 4 OF 7
GENERATOR S/N 5CA1-UP,5DA1-UP,5EA1-UP
AN ATTACHMENT

4W-8145 CHART-CIRCUIT BREAKER

4W8145 CHART-CIRCUIT BREAKER-PART 5 OF 7
GENERATOR S/N 5CA1-UP,5DA1-UP,5EA1-UP
AN ATTACHMENT

4W-8145 CHART-CIRCUIT BREAKER

4W8145 CHART-CIRCUIT BREAKER PART 6 OF 7
GENERATOR S/N 5CA1-UP, 5DA1-UP, 5EA1-UP
AN ATTACHMENT

4W-8145 CHART-CIRCUIT BREAKER

4W8145 CHART-CIRCUIT BREAKER-PART 7 OF 7
GENERATOR S/N 5CA1-UP, 5DA1-UP, 5EA1-UP
AN ATTACHMENT

CONTACTOR GP

3N-6867 CONTACTOR GP-PRESS & TEMP

3N6867 CONTACTOR GP-OIL PRESSURE AND WATER TEMPERATURE
PART OF 3N8423 CONTACTOR
AN ATTACHMENT

3N-8423 CONTACTOR GP-PRESS & TEMP

3N8423 CONTACTOR GROUP
PART OF 1059625 & 1059623 SHUT-OFF
AN ATTACHMENT

7L-7367 CONTACTOR GP-OVERSPEED

7L7367 CONTACTOR GP-OVER SPEED
FOR USE WITH ENGINES RATED 1600-2950 AND TACHOMETER DRIVE
FOR FIELD REPLACEMENT ORDER 3N6385-PAGE 87B
AN ATTACHMENT

3N-6385 CONTACTOR GP-OVERSPEED

3N6385 OVERSPEED CONTACTOR GROUP
FIELD REPLACEMENT FOR 7L7367 OVERSPEED CONTACTOR
AN ATTACHMENT

IGNITION GP

9Y-6491 IGNITION GP-GAS ENGINE

9Y6491 IGNITION GP-GAS ENGINE
TYPE 1
7N2587-PAGE 84, 9Y6465-PAGE 84A
AN ATTACHMENT

9Y-6491 IGNITION GP-GAS ENGINE

9Y6491 IGNITION GP-GAS ENGINE
TYPE 2
9Y6465-PAGE 84A, 7N2587-PAGE 84
AN ATTACHMENT

7N-3973 IGNITION GP-GAS ENGINE

7N3973 IGNITION GROUP
REPLACED BY 9Y6491-PAGE 80.02
7L3031-PAGE 83, 7N2587-PAGE 84
AN ATTACHMENT

8N-2038 IGNITION GP-GAS ENGINE

8N2038 IGNITION GP
REPLACED BY 9Y6492 IGNITION-PAGE 82A.04
7L3031-PAGE 83, 7N2587-PAGE 84

8N-1858 IGNITION GP-GAS ENGINE

8N1858 IGNITION GROUP-SOLID STATE
7N9378-PAGE 82B
AN ATTACHMENT

2W-6617 IGNITION GP-GAS ENGINE

2W6617 IGNITION GP-GAS ENGINE
TYPE 1
2W3749-PAGE 84B & 7N2587-PAGE 84
FOR USE WITH ALTRONIC IGNITION
AN ATTACHMENT

2W-6617 IGNITION GP-GAS ENGINE

2W6617 IGNITION GP-GAS ENGINE
TYPE 2. 2W3749-PAGE 84B & 7N2587-PAGE 84
FOR USE WITH ALTRONIC IGNITION &
TURBO SEPARATE CIRCUIT WATER AFTERCOOLED ARS
AN ATTACHMENT

2W-4872 IGNITION GP-GAS ENGINE

2W4872 IGNITION GP-GAS ENGINE
TYPE 1
7N2587-PAGE 84 & 2W3749-PAGE 84B
AN ATTACHMENT

2W-4872 IGNITION GP-GAS ENGINE

2W4872 IGNITION GP-GAS ENGINE
TYPE 2
7N2587-PAGE 84, 2W3749-PAGE 84B
AN ATTACHMENT

4W-3283 CONVERSION GP-IGNITION

4W3283 IGNITION CONVERSION GROUP
2W3749-PAGE 84B. {PROVIDES FIELD INSTALLATION OF ALTRONIC III IGNITION
SYSTEM TO CURRENT SPARK IGNITED ENGINES. FOR USE WITH 8L5850 PANEL AS
WHEN USED TO CONVERT 7N3973 & 8N2038 IGNITION GROUP}

9Y-6492 IGNITION GP-GAS ENGINE

9Y6492 IGNITION GP-GAS ENGINE
TYPE 1
7N2587-PAGE 84, 9Y6465-PAGE 84A
AN ATTACHMENT

9Y-6492 IGNITION GP-GAS ENGINE

9Y6492 IGNITION GP-GAS ENGINE
TYPE 2
7N2587-PAGE 84, 9Y6465-PAGE 84A
AN ATTACHMENT

MAGNETO GP

7N-9378 MAGNETO GP

7N9378 MAGNETO GROUP
PART OF 8N1858 IGNITION
FIELD REPLACEMENT ORDER 7E8055-PAGE 82C
AN ATTACHMENT

7E-8055 MAGNETO GP

7E8055 MAGNETO GP-SOLID STATE
FIELD REPLACEMENT FOR 7N9378-PAGE 82B

7L-3031 MAGNETO AS

7L3031 MAGNETO ASSEMBLY
TYPE 1
PART OF 7N3973 & 8N2038 IGNITIONS

7L-3031 MAGNETO AS

7L3031 MAGNETO ASSEMBLY
TYPE 2
PART OF 7N3973 & 8N2038 IGNITION

7N-2587 GEAR GP-MAGNETO DRIVE

7N2587 MAGNETO DRIVE GEAR GROUP-TYPE 1
PART OF 7N3973, 8N2038, 2W6617, 2W4872, 9Y6491, 9Y6492 IGNITIONS
AN ATTACHMENT

9Y-6465 MAGNETO GP

9Y6465 MAGNETO GP
PART OF 9Y6491, 9Y6492 IGNITIONS
AN ATTACHMENT

7N-2587 GEAR GP-MAGNETO DRIVE

7N2587 MAGNETO DRIVE GEAR GROUP-TYPE 2
PART OF 2W4872, 2W6617, 7N3973, 8N2038, 9Y6491, 9Y6492 IGNITIONS
AN ATTACHMENT

2W-3749 MAGNETO GP

2W3749 MAGNETO DRIVE GEAR GROUP
PART OF 2W6617, 2W4872, 4W3283, IGNITIONS
AN ATTACHMENT

7N-4313 DRIVE GP-MAGNETO

7N4313 DRIVE GP-MAGNETO

MISCELLANEOUS INFORMATION

3N-8806 MOUNTING GP

3N8806 CONTACTOR MOUNTING GROUP
TYPE 1
PART OF 3N8423 CONTACTOR
AN ATTACHMENT

3N-8806 MOUNTING GP

3N8806 CONTACTOR MOUNTING GROUP
TYPE 3
PART OF 3N8423 CONTACTOR
AN ATTACHMENT

3N-8806 MOUNTING GP

3N8806 CONTACTOR MOUNTING GROUP
TYPE 2
PART OF 3N8423 CONTACTOR
AN ATTACHMENT

SENDER GP

7W-0784 SENDER GP

7W0784 SENDER GP-24 VOLTS
AN ATTACHMENT

SENSOR GP

5N-8757 MAGNETIC PICKUP GP

5N8757 MAGNETIC PICKUP GROUP
AN ATTACHMENT

SHUTOFF GP

1N-9306 VALVE AS-SHUTOFF

1N9306 VALVE AS-SAFETY SHUT-OFF-GAS
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM
AN ATTACHMENT

SOLENOID GP

3T-5045 SOLENOID AS

3T5045 SOLENOID SWITCH ASSEMBLY
12 VOLT
PART OF 3T2655 & 7T9254 STARTING MOTORS
AN ATTACHMENT

3T-3421 SOLENOID AS

3T3421 SOLENOID ASSEMBLY
24 VOLT
FIELD REPLACEMENT FOR 3T4704-PAGE 78A

7L-6586 SOLENOID AS

7L6586 SOLENOID SWITCH ASSEMBLY
12 VOLT
PART OF 9L3597 STARTING MOTOR
AN ATTACHMENT

2N-2342 VALVE AS-SOLENOID

2N2342 VALVE AS-SOLENOID

8C-9600 VALVE GP-SOLENOID

8C9600 VALVE GP-SOLENOID
24 VOLT
AN ATTACHMENT

STARTING MOTOR GP

8L-5455 STARTING MOTOR GP-ELECTRIC

8L5455 ELECTRIC STARTING MOTOR GP
12 VOLT. TYPE 1
9L3597-PAGE 76
AN ATTACHMENT

8L-5455 STARTING MOTOR GP-ELECTRIC

8L5455 ELECTRIC STARTING MOTOR GP
12 VOLT. TYPE 2
3L6655-PAGE 74D, 3T2655-PAGE 75A.00.02
AN ATTACHMENT

8L-5455 STARTING MOTOR GP-ELECTRIC

8L5455 MOTOR GP-ELECTRIC STARTING
12 VOLT. TYPE 3
3T2655-PAGE 75A.00.02
AN ATTACHMENT

3T-2655 STARTING MOTOR GP-ELECTRIC

3T2655 STARTING MOTOR GP-ELECTRIC-PART 1 OF 2*R
12 VOLT. TYPE 1
3T5045-PAGE 78A.
PART OF 8L5455 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

3T-2655 STARTING MOTOR GP-ELECTRIC

3T2655 STARTING MOTOR GP-ELECTRIC-PART 2 OF 2*R
12 VOLT. TYPE 1
PART OF 8L5455 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

3T-2655 STARTING MOTOR GP-ELECTRIC

3T2655 STARTING MOTOR GP-ELECTRIC*R
12 VOLT. TYPE 2
PART OF 8L5455 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

7T-9254 STARTING MOTOR GP-ELECTRIC

7T9254 STARTING MOTOR GP-ELECTRIC-PART 1 OF 2
12 VOLT
3T5045-PAGE 78A
PART OF 3T2655 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

7T-9254 STARTING MOTOR GP-ELECTRIC

7T9254 STARTING MOTOR GP-ELECTRIC-PART 2 OF 2
12 VOLT
PART OF 3T2655 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

8C-3648 STARTING MOTOR GP-ELECTRIC

8C3648 STARTING MOTOR GP-ELECTRIC
12 VOLT
PART OF 3T2655 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

7T-2265 STARTING MOTOR GP-ELECTRIC

7T2265 STARTING MOTOR GP-ELECTRIC
12 VOLT. TYPE 1
PART OF 3T2655 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

7T-2265 STARTING MOTOR GP-ELECTRIC

7T2265 STARTING MOTOR GP-ELECTRIC
12 VOLT. TYPE 2
PART OF 3T2655 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

1W-5516 STARTING MOTOR GP-ELECTRIC

1W5516 ELECTRIC STARTING MOTOR GROUP
24 VOLT
3L6655-PAGE 74D & 3T2652-PAGE 77A
AN ATTACHMENT

9L-3597 STARTING MOTOR GP-ELECTRIC

9L3597 ELECTRIC STARTING MOTOR ASSEMBLY-PART 1 OF 2
12 VOLT
PART OF 8L5455 STARTING MOTOR
AN ATTACHMENT

9L-3597 STARTING MOTOR GP-ELECTRIC

9L3597 ELECTRIC STARTING MOTOR ASSEMBLY-PART 2 OF 2
12 VOLT
7L6586-PAGE 78C
PART OF 8L5455 STARTING MOTOR
AN ATTACHMENT

3T-2652 STARTING MOTOR GP-ELECTRIC

3T2652 STARTING MOTOR GP-ELECTRIC*R
24 VOLT. TYPE 1
3T4704-PAGE 78A. PART OF 1W5516 STARTING MOTOR-ELECTRIC
FOR FIELD REPLACEMENT ORDER 6V5227-PAGE 77Q.01
AN ATTACHMENT

3T-2652 STARTING MOTOR GP-ELECTRIC

3T2652 STARTING MOTOR GP-ELECTRIC*R
24 VOLT. TYPE 3
7T0798-PAGE 77E, 8C3647-PAGE 77N
PART OF 1W5516 STARTING MOTOR. AN ATTACHMENT

3T-2652 STARTING MOTOR GP-ELECTRIC

3T2652 ELECTRIC STARTING MOTOR GROUP*R
24 VOLT. TYPE 2
7T0798-PAGE 77E, 7T0799-PAGE 77G
PART OF 1W5516 STARTING MOTOR. AN ATTACHMENT

7T-0798 STARTING MOTOR GP-ELECTRIC

7T0798 STARTING MOTOR GP-ELECTRIC
TYPE 1
PART OF 3T2652 ELECTRIC STARTING MOTOR
FOR FIELD REPLACEMENT ORDER 4N3181-PAGE 77Q
AN ATTACHMENT

7T-0798 STARTING MOTOR GP-ELECTRIC

7T0798 STARTING MOTOR GP-ELECTRIC
TYPE 2
PART OF 3T2652 ELECTRIC STARTING MOTOR
FIELD REPLACEMENT ORDER 4N3181-PAGE 77Q OR 6V5227-PAGE 77Q.01
AN ATTACHMENT

7T-0799 STARTING MOTOR GP-ELECTRIC

7T0799 STARTING MOTOR GP-ELECTRIC
24 VOLT. TYPE 1
3T4704-PAGE 78A
PART OF 3T2652 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

7T-0799 STARTING MOTOR GP-ELECTRIC

7T0799 STARTING MOTOR GP-ELECTRIC
24 VOLT. TYPE 2
7T8854-PAGE 78B
PART OF 3T2652 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

106-8552 STARTING MOTOR GP-ELECTRIC

1068552 MOTOR GP-ELECTRIC
24 VOLT
PART OF 6V5227 STARTING MOTOR-ELECTRIC
FIELD INSTALLATION

8C-3647 STARTING MOTOR GP-ELECTRIC

8C3647 STARTING MOTOR GP-ELECTRIC
24 VOLT
PART OF 3T2652 STARTING MOTOR
AN ATTACHMENT

4N-3181 STARTING MOTOR GP-ELECTRIC

4N3181 STARTING MOTOR GP-ELECTRIC
24 VOLT
FIELD REPLACEMENT FOR 7T0798-PAGE 77E

6V-5227 STARTING MOTOR GP-ELECTRIC

6V5227 STARTING MOTOR GP-ELECTRIC*R
24 VOLT
FIELD REPLACEMENT FOR 7T0798-PAGE 77F & 3T2652-PAGE 77A

6V-5537 STARTING MOTOR GP-ELECTRIC

6V5537 MOTOR GP-ELECTRIC
24 VOLT
PART OF 6V5227 STARTING MOTOR-ELECTRIC

6V-5538 STARTING MOTOR GP-ELECTRIC

6V5538 MOTOR GP-ELECTRIC
24 VOLT
PART OF 6V5227 STARTING MOTOR-ELECTRIC

3T-6305 STARTING MOTOR GP-ELECTRIC

3T6305 STARTING MOTOR GP-ELECTRIC
24 VOLT
PART OF 4N3181 STARTING MOTOR-ELECTRIC
AN ATTACHMENT

8C-3651 STARTING MOTOR GP-ELECTRIC

8C3651 STARTING MOTOR GP-ELECTRIC
24 VOLT
PART OF 4N3181 STARTING MOTOR
AN ATTACHMENT

9X-4447 STARTING MOTOR GP-ELECTRIC

9X4447 STARTING MOTOR GP-ELECTRIC
24 VOLT
PART OF 4N3181 STARTING MOTOR-ELECTRIC

3T-4704 SOLENOID AS-STARTING MOTOR

3T4704 SOLENOID ASSEMBLY-24 VOLT
PART OF 3T2652 & 7T0799 STARTING MOTOR
FOR FIELD REPLACEMENT ORDER 3T3421-PAGE 78B
AN ATTACHMENT

7T-8854 SOLENOID AS-STARTING MOTOR

7T8854 SOLENOID ASSEMBLY
24 VOLT
PART OF 7T0799 STARTING MOTOR
FIELD REPLACEMENT ORDER 3T4704-PAGE 78A. AN ATTACHMENT

1L-5011 VALVE GP-STARTING AIR

1L5011 REGULATING AND PRESSURE REDUCING VALVE GROUP
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT

4N-5712 STARTING MOTOR GP-AIR

4N5712 MOTOR GP-AIR STARTING
REPLACED BY 7W9654-PAGE 79B. TYPE 1
4N4370-PAGE 80
AN ATTACHMENT

4N-5712 STARTING MOTOR GP-AIR

4N5712 MOTOR GP-AIR STARTING
REPLACED BY 7W9654-PAGE 79B. TYPE 2
4N4370-PAGE 80
AN ATTACHMENT

7W-9654 STARTING MOTOR GP-AIR

7W9654 MOTOR GP-AIR STARTING
7W9655-PAGE 80.01
2W3560 AIR STARTING SILENCER IS AVAILABLE
AN ATTACHMENT

4N-4370 STARTING MOTOR GP-AIR

4N4370 AIR MOTOR GROUP
PART OF 4N5712 AIR STARTING MOTOR
AN ATTACHMENT

7W-9655 STARTING MOTOR GP-AIR

7W9655 MOTOR GP-STARTING
PART OF 7W9654 AIR STARTING MOTOR
AN ATTACHMENT

SWITCH GP

6I-4290 SWITCH GP

6I4290 SWITCH GP
3E0264-PAGE 39.03

3E-0264 SWITCH AS-TEMPERATURE

3E0264 SWITCH AS-TEMPERATURE
PART OF 6I4290 SWITCH

TRANSFORMER GP

TRANSFORMER-CURRENT

TRANSFORMER-CURRENT
GENERATOR S/N 5DA4191-UP & 5EA3660-UP

4W-7609 MOUNTING GP-TRANSFORMER

4W7609 MOUNTING GP-TRANSFORMER-CURRENT
GENERATOR S/N 5CA1-UP,5DA1-UP,5EA1-UP
FOR USE WITH GENERATOR MOUNTED CONTROL PANEL
ON ALL 440 FRAME GENERATORS. AN ATTACHMENT

9Y-3845 MODULE AS-SERIES BOOST

9Y3845 MODULE AS-BOOST
S/N 5EA4944-UP
PART OF 7C6850 TRANSFORMER
AN ATTACHMENT

7W-1616 TRANSFORMER GP-CURRENT

7W1616 TRANSFORMER GP-CURRENT
S/N 5CA1-UP & 5DA1-UP
PROVIDES A DROOP CURRENT TRANSFORMER WITH IRON & ASSEMBLY
INSTRUCTIONS FOR WYE CONNECTIONS. AN ATTACHMENT

7W-1617 TRANSFORMER GP-CURRENT

7W1617 TRANSFORMER GP-CURRENT
S/N 5DA1-UP & 5EA1-UP
PROVIDES DROOP TRANSFORMER & T8 WRAPPING PROCEDURES FOR
WYE CONNECTIONS. AN ATTACHMENT

9Y-3857 TRANSFORMER GP-CURRENT

9Y3857 TRANSFORMER GP-CURRENT
DROOP-WYE CONNECTION. GENERATOR S/N 5EA4944-UP
7C6979-PAGE 123D.05
FOR USE WITH GENERATOR WITH VR3 REGULATOR
AN ATTACHMENT

7C-6850 TRANSFORMER GP-CURRENT

7C6850 TRANSFORMER GP-CURRENT
SERIES BOOST-440 FRAME
GENERATOR S/N 5EA4944-UP
9Y3845-PAGE 123D.01.
NOT FOR USE WITH GENERATOR CONNECTION BOX. AN ATTACHMENT

7C-6979 TRANSFORMER AS

7C6979 TRANSFORMER AS
GENERATOR S/N 5EA4944-UP
PART OF 9Y3857 TRANSFORMER
AN ATTACHMENT

VALVE GP

2N-2342 VALVE AS-SOLENOID

2N2342 VALVE AS-SOLENOID

8C-9600 VALVE GP-SOLENOID

8C9600 VALVE GP-SOLENOID
24 VOLT
AN ATTACHMENT

1L-5011 VALVE GP-STARTING AIR

1L5011 REGULATING AND PRESSURE REDUCING VALVE GROUP
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT

WIRING GP

3L-6655 WIRING GP

3L6655 WIRING KIT GROUP
PART OF 1W5516, 8L5455 ELECTRIC STARTING MOTOR

2L-9808 WIRING GP

2L9808 WIRING GROUP
PART OF 3N2708, 3N2709, 3N2706, & 3N2707 ALTERNATORS
AN ATTACHMENT

6I-0741 WIRING GP

6I0741 WIRING GP
AN ATTACHMENT

6I-3548 WIRING GP

6I3548 WIRING GP
AN ATTACHMENT

4P-5396 CONNECTION GP-ELECTRICAL

4P5396 CONNECTION GP-ELECTRICAL
FOR USE WITH SPARK IGNITED PACKAGED GENERATOR SETS
AN ATTACHMENT

HEATER GP

6I-4289 MOUNTING GP-JACKET WTR HEATER

6I4289 MOUNTING GP-JACKET WATER HEATER

7E-6247 HEATER GP-JACKET WATER

7E6247 HEATER GP-JACKET WATER
3 KW-120/240 VOLT-TYPE 2
AN ATTACHMENT

7E-6247 HEATER GP-JACKET WATER

7E6247 HEATER GP-JACKET WATER
3 KW-120/240 VOLT-TYPE 1
AN ATTACHMENT

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

THERMOCOUPLE GP

Engine News

Field Installation Procedure For Stator Thermocouples and RTDs{7498,4453}
1995/08/01

ALARM GP

Operation and Maintenance Manual

Alarms and Shutoffs
G3300 Engines

Service Magazine

Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21

ALTERNATOR GP-CHARGING

Engine News

New Regulator And Field Coil Assemblies Used
1981/11/25

FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18

Identification Of External Terminals On Alternators
1987/04/01

Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01

8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01

Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01

Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Alternator - Inspect
G3300 Engines

Alternator and Fan Belts - Inspect/Adjust/Replace
G3300 Engines

Special Instruction

Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
G3304 and G3306 Engines

Alternator Mounting
G3304 and G3306 Engines

Alternator and Regulator
G3304 and G3306 Engines

Testing and Adjusting

Belt Tension Chart
G3304 and G3306 Engines

Charging System
G3304 and G3306 Engines

Troubleshooting

Charging System
EMCP3

Service Magazine

New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25

New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02

Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Engine News

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01

Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01

5P957 And 5P3514 Coolant And Battery Tester
1987/04/01

Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01

Safety Vent Caps For Caterpillar Batteries
1977/07/13

Operation and Maintenance Manual

Battery Electrolyte Level - Check
G3300 Engines

Starting with Jump Start Cables
G3300 Engines

Cold Weather Starting
G3300 Engines

Battery Charger - Check
G3300 Engines

Batteries - Replace
G3300 Engines

Special Instruction

Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Battery Test Procedure {1401}
Battery Test Procedure {1401}

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

Testing and Adjusting

Battery
G3304 and G3306 Engines

Troubleshooting

Charging System
EMCPII+ for Gas Engines

GSC CID 0168 - FMI 03
EMCPII+ for Gas Engines

GSC CID 0168 - FMI 04
EMCPII+ for Gas Engines

Charging System
EMCP3

Service Magazine

Maintenance Free Batteries{1401}
1986/03/10

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29

Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21

New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

New Battery Is Now Used as a Service Replacement for Certain Cat® Products {1401, 1926}
2014/04/24

BOX GP

Engine News

Diode Removed From Junction Box Group{1400,1417}
1997/03/01

CIRCUIT BREAKER GP

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01

Obsolete Merlin Gerin CK and CM Frame Circuit Breaker Replacements Are Now Available {1420, 4461}
2012/06/25

Service Letter-NACD

Circuit Breakers Need To Be Inspected On Certain 3208, 3304, 3304B, G3306, 3306, 3306B, 3406, 3406C, 3408B, 3408C, 3412, Generator Sets
Circuit Breakers Need To Be Inspected On Certain 3208, 3304, 3304B, G3306, 3306, 3306B, 3406, 3406C, 3408B, 3408C, 3412, Generator Sets

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Service Letter-APD

Service Magazine

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24

Obsolete Capacitor In VR1 Voltage Regulators{4467}
1990/11/05

CONTACTOR GP

Specifications

Overspeed Contactor
G3304 and G3306 Engines

Coolant Temperature Contactor
G3304 and G3306 Engines

CONTROL GP-ELECTRONIC

Special Instruction

Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQ^TM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}

Service Magazine

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

ELECTRONICS GP-ENGINE

Engine News

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01

Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01

Corrections To Operation and Maintenance Manual, SEBU6356-01, "G3304 and G3306 Engines" {7450}
2001/09/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Engine Protective Devices - Check
G3300 Engines

Cold Weather Starting
G3300 Engines

Ignition Systems
G3300 Engines

Gauges and Indicators
G3300 Engines

Special Instruction

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Systems Operation

Electronic Ignition System
EMCPII+ for Gas Engines

Electronic Control Module (Engine) - Electronic Unit Injection (EUI) Engines Only
EMCP3

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Troubleshooting

GSC CID 0590 - FMI 09
EMCPII+ for Gas Engines

Service Magazine

New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

ELECTRONICS GP-POWER TRAIN

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-IMPLEMENT

ELECTRONICS GP-MACHINE

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Service Magazine

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

CONTROL GP-TIMING

Operation and Maintenance Manual

Ignition Systems
G3300 Engines

CONTROL GP-VOLTAGE

Special Instruction

Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}

Service Magazine

New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

CONVERTER GP-ELECTRICAL

Disassembly and Assembly

Magneto Drive
3304 & 3306 NATURAL GAS ENGINES

DISTRIBUTOR GP-ELECTRONIC

Operation and Maintenance Manual

Ignition Systems
G3300 Engines

ELECTRICAL GP

Special Instruction

Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}

Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of Electric (Digital) Tachometer Groups{7462}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Systems Operation

Electrical System
G3304 and G3306 Engines

Service Magazine

Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

Digital Tachometer Available{7462}
1983/08/15

Maintenance Free Batteries{1401}
1986/03/10

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10

Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

Improved Start Switch Used{1416}
1987/05/25

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

9G7641 Start Switch Is Improved{1416,1400}
1988/05/16

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

New Digital Tachometers Available As Attachments{7462}
1990/06/18

Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

ELECTRONICS GP

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Service Magazine

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

GLOW PLUG GP

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21

HANDLE AS-PROPEL

Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10

IGNITION GP

Engine News

Explanation Of Differences In Timing Advance Information
1981/08/26

Altronic III Ignition Systems Available
1982/10/20

Spacer Available To Eliminate Cracks On Ignition Coil Mounting Bracket
1990/08/01

New Ignition Groups Meet CSA (Canadian Standards Association) Specifications{1550}
1995/02/01

Guidelines For Electrically Grounding Gas Engines {7423}
1997/08/01

Effects Of Corona On Spark Plugs {1555}
1998/07/01

Fabricated Spark Plug Gapping Tool {0766,1555}
1998/09/01

New Gasket Allows Easier Spark Plug Service{1555}
1999/09/01

Guidelines For Maintenance Of Spark Plugs In Gas Engines {1555}
2001/06/01

Check Spark Plug Wires {1558}
2002/09/01

Recommendations for Gas Engine Spark Plugs {1550, 1555}
2007/07/02

New Magnetos with Improved Venting Are Used {1550, 1552, 5118}
2008/09/08

Operation and Maintenance Manual

Ignition Systems
G3300 Engines

Ignition System Spark Plugs - Inspect/Replace
G3300 Engines

Special Instruction

Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}
Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}

Service Letter-NACD

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Letter-Australia

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Letter-CFEL

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Letter-CSARL

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Letter-Americas

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Letter-Brazil

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Specifications

Gas Engine Ignition
G3304 and G3306 Engines

Service Letter-China

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Letter-Asia

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Systems Operation

Ignition System
G3304 and G3306 Engines

Service Letter-APD

The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Disassembly and Assembly

Spark Plugs
3306 NATURAL GAS ENGINE

Spark Plug Adapters
3306 NATURAL GAS ENGINE

Spark Plugs, Spark Plug Adapters
3304 & 3306 NATURAL GAS ENGINES

Service Magazine

Preventive Maintenance For Natural Gas Engine Spark Ignition System{1550,1552,1555,1558}
1981/09/21

Altronic III Ignition Systems Available{1560}
1982/10/11

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Spacer Available To Eliminate Cracks On Ignition Coil Mounting Bracket{1554}
1990/08/13

Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/04/01

IGNITION GP-GAS ENGINE

Engine News

New Spark Plugs Are Available {1555}
2001/01/01

Caterpillar No Longer Recommends The Use Of 195-6071 Spark Plugs Or 195-6353 Spark Plugs On G3300 Engines Or G3400 Engines {1555}
2001/09/01

Operation and Maintenance Manual

Ignition System Transformer Resistance - Test
G3300 Engines

Carburetor Air/Fuel Ratio - Check/Adjust
G3300 Engines

Ignition System Timing - Check/Adjust
G3300 Engines

Specifications

Gas Shutoff Valve
G3304 and G3306 Engines

Testing and Adjusting

Ignition System
G3304 and G3306 Engines

Disassembly and Assembly

Spark Plugs - Remove and Install
G3304 and G3306 Engines

Spark Plug Adapter - Remove and Install
G3304 and G3306 Engines

Magneto - Disassemble
G3304 and G3306 Engines

Magneto - Assemble
G3304 and G3306 Engines

INDICATOR GP

Engine News

New Engine Timing Indicator Group Available
1986/07/01

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01

New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group
1987/07/01

Special Instruction

Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}

Specifications

Water Temperature Indicator
G3304 and G3306 Engines

Service Magazine

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

New Engine Timing Indicator Group Available {0781,0782}
1986/07/07

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

LIGHTING GP

Special Instruction

Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}

Service Magazine

Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

Testing The Starter On The Engine{1401,1450}
1987/05/04

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

MAGNETO GP

Engine News

New Governor Drive Gears And Weight Assemblies
1983/09/14

New Drive Coupler Kit Used On Altronic Magneto
1985/03/01

New Governor Drive Group Has Longer Service Life
1985/05/01

New Altronic V Magneto Used
1991/02/01

New Service Seal Used In Altronic III Magnetos
1992/11/01

Improved Breather Vent Helps Prevent Water Entry Into Altronic III Magnetos{1552}
1996/10/01

New Seal Between Front And Rear Stator Housings {1552}
1998/02/01

New Waterproof Covers for Magnetos are Used {1552}
2003/06/01

New Location for the Magneto's Vent {1552}
2006/05/01

New Magnetos with Improved Venting Are Used {1550, 1552, 5118}
2008/09/08

Special Instruction

Using the 6I2539 Installation Sleeve{1552}
Using the 6I2539 Installation Sleeve{1552}

Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}
Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}

Specifications

Magneto Drive
G3304 and G3306 Engines

Magneto
G3304 and G3306 Engines

Disassembly and Assembly

Magneto
3306 NATURAL GAS ENGINE

Magneto Drive
3306 NATURAL GAS ENGINE

Governor And Governor Drive
3306 NATURAL GAS ENGINE

Governor Drive
3306 NATURAL GAS ENGINE

Magneto
3304 & 3306 NATURAL GAS ENGINES

Magneto Drive
3304 & 3306 NATURAL GAS ENGINES

Altronic Magneto
3304 & 3306 NATURAL GAS ENGINES

Magneto - Remove and Install
G3304 and G3306 Engines

Magneto Drive - Remove and Install
G3304 and G3306 Engines

Magneto Drive - Disassemble
G3304 and G3306 Engines

Magneto Drive - Assemble
G3304 and G3306 Engines

Service Magazine

Preventive Maintenance For Natural Gas Engine Spark Ignition System{1550,1552,1555,1558}
1981/09/21

Altronic III Ignition Systems Available{1560}
1982/10/11

New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22

New Drive Coupler Kit Used On Altronic Magneto{1552}
1985/02/18

New Altronic V Magneto Used{1552}
1991/02/11

New Service Seal Used In Altronic III Magnetos{1552}
1992/11/23

MISCELLANEOUS INFORMATION

Engine News

Explanation Of Differences In Timing Advance Information
1981/08/26

Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01

Improved Starter Solenoid Prevents Contact Corrosion
1987/12/01

"Ugly's Electrical-References" SEBD0983, Now Available
1990/06/01

Safety Vent Caps For Caterpillar Batteries
1977/07/13

New Starter Motors Have Solenoid On Top Of Starter
1978/03/01

Operation and Maintenance Manual

Engine Protective Devices - Check
G3300 Engines

Starting Motor - Inspect
G3300 Engines

Starting the Engine
G3300 Engines

Special Instruction

Using the 6I2539 Installation Sleeve{1552}
Using the 6I2539 Installation Sleeve{1552}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Service Letter-NACD

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Systems Operation

Electrical System
G3304 and G3306 Engines

Air Starting System Operation
G3304 and G3306 Engines

Service Letter-APD

Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines

Service Magazine

Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14

Preventive Maintenance For Natural Gas Engine Spark Ignition System{1550,1552,1555,1558}
1981/09/21

New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23

Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28

Altronic III Ignition Systems Available{1560}
1982/10/11

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Maintenance Free Batteries{1401}
1986/03/10

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10

Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23

Use Improved Heat Start Switch{1416}
1987/04/20

Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18

Improved Start Switch Used{1416}
1987/05/25

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

9G7641 Start Switch Is Improved{1416,1400}
1988/05/16

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21

New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

Obsolete Capacitor In VR1 Voltage Regulators{4467}
1990/11/05

New Service Seal Used In Altronic III Magnetos{1552}
1992/11/23

MOTOR GP

Special Instruction

Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}

Service Magazine

Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28

PANEL GP-CIRCUIT BREAKER

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

PANEL GP-FUSE

REGULATOR GP-VOLTAGE

Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}

Service Magazine

New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

SENDER GP

Special Instruction

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

SENSOR GP

Engine News

New Coolant Level Sensor Available {7422}
2001/02/01

Correction to Troubleshooting , "GSC CID 0190 - FMI 02" {1907}
2002/07/01

Coolant Sensor Installation Service Notes {5574}
2005/12/26

Operation and Maintenance Manual

Engine Protective Devices - Check
G3300 Engines

Speed Sensor - Clean/Inspect
G3300 Engines

Special Instruction

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Specifications

Pressure Sensor
G3304 and G3306 Engines

Engine Speed Sensor
G3304 and G3306 Engines

Coolant Level Sensor
G3304 and G3306 Engines

Engine Speed Sensor
G3304 and G3306 Engines

Coolant Level Sensor
G3304 and G3306 Engines

Engine Speed Sensor
G3304 and G3306 Engines

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
EMCPII+ for Gas Engines

Testing and Adjusting

Speed Sensor (Engine) - Adjust
EMCPII+ for Gas Engines

Measuring Inlet Manifold Temperature
G3304 and G3306 Engines

Speed Sensor (Engine) - Adjust
EMCP3

Engine Speed Timing Calibration - Setup
EMCP3

Troubleshooting

GSC CID 0100 - FMI 03
EMCPII+ for Gas Engines

GSC CID 0100 - FMI 04
EMCPII+ for Gas Engines

GSC CID 0110 - FMI 03
EMCPII+ for Gas Engines

GSC CID 0111 - FMI 03
EMCPII+ for Gas Engines

GSC CID 0110 - FMI 04
EMCPII+ for Gas Engines

GSC CID 0175 - FMI 02
EMCPII+ for Gas Engines

GSC CID 0175 - FMI 03
EMCPII+ for Gas Engines

GSC CID 0175 - FMI 04
EMCPII+ for Gas Engines

GSC CID 0190 - FMI 02
EMCPII+ for Gas Engines

GSC CID 0190 - FMI 03
EMCPII+ for Gas Engines

GSC CID 0269 - FMI 03
EMCPII+ for Gas Engines

GSC CID 0269 - FMI 04
EMCPII+ for Gas Engines

GSC CID 0100 - FMI 02 (for Engine with ECM)
EMCPII+ for Gas Engines

GSC CID 0100 - FMI 02 (for Engine with EIS)
EMCPII+ for Gas Engines

GSC CID 0110 - FMI 02 (for Engine with EIS)
EMCPII+ for Gas Engines

Service Magazine

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

SHUTOFF GP

Engine News

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13

Operation and Maintenance Manual

Alarms and Shutoffs
G3300 Engines

Emergency Stopping
G3300 Engines

Manual Stop Procedure
G3300 Engines

Specifications

Gas Shutoff Valve
G3304 and G3306 Engines

Service Magazine

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

SOLENOID GP

Engine News

12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01

Improved Starter Solenoid Prevents Contact Corrosion
1987/12/01

Adjust Bosch Solenoid If Replaced Or Reinstalled
1988/01/01

Magnetic Switches (Starter Relays) Improved
1988/03/01

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13

New Starter Motors Have Solenoid On Top Of Starter
1978/03/01

Service Magazine

Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16

Improved Starter Solenoid Prevents Contact Corrosion {1453}
1987/11/30

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

SOLENOID GP-SHUTOFF

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

STARTING GP-AUTOMATIC

Operation and Maintenance Manual

Automatic Start/Stop - Inspect - Generator Set
G3300 Engines

STARTING AID GP

Cold Weather Starting
G3300 Engines

Service Magazine

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

STARTING AR

Special Instruction

Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}

Service Magazine

Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

Testing The Starter On The Engine{1401,1450}
1987/05/04

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

STARTING MOTOR GP

General Service Information

Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Engine News

New Bearing Used In Air Starting Motor
1982/09/22

12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01

Testing The Starter On The Engine
1987/05/01

Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01

Improved Starter Solenoid Prevents Contact Corrosion
1987/12/01

Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01

Magnetic Switches (Starter Relays) Improved
1988/03/01

New Starter Motors Have Solenoid On Top Of Starter
1978/03/01

A Special Instruction Is Available For Replacing Starting Motor Solenoids {1467}
2001/08/01

New Starting Motors Used {1453}
2002/05/01

A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}

Operation and Maintenance Manual

Air Tank Moisture and Sediment - Drain
G3300 Engines

Air Starting Motor Lubricator Bowl - Clean
G3300 Engines

Air Starting Motor Lubricator Oil Level - Check
G3300 Engines

Cold Weather Starting
G3300 Engines

Starting Motor - Inspect
G3300 Engines

Starting the Engine
G3300 Engines

Special Instruction

Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}

Caterpillar PRELUB® Diagnostics{1469}
Caterpillar PRELUB^® Diagnostics{1469}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Air Starting Motor Pressure Regulating Valve
G3304 and G3306 Engines

Electric Starting Motor
G3304 and G3306 Engines

Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors

Air Starting Motor
G3304 and G3306 Engines

Electric Starting Motor
G3304 and G3306 Engines

Systems Operation

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors

Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors

Air Starting System Operation
G3304 and G3306 Engines

Testing and Adjusting

No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Pressure Regulating Valve
G3304 and G3306 Engines

Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors

Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Magnetic Switch - Test - for Engine with EIS
EMCPII+ for Gas Engines

Troubleshooting

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Remains Engaged
EMCPII+ for Gas Engines

Disassembly and Assembly

Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Service Magazine

Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28

New Bearing Used In Air Starting Motor {1451}
1982/09/13

Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10

12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16

Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16

Testing The Starter On The Engine{1401,1450}
1987/05/04

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Improved Starter Solenoid Prevents Contact Corrosion {1453}
1987/11/30

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29

Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02

SWITCH GP

Engine News

Check For Dirt Before Replacing Pyrometer Switch
1987/01/01

Magnetic Switches (Starter Relays) Improved
1988/03/01

Special Instruction

Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Specifications

Coolant Temperature Contactor
G3304 and G3306 Engines

Pressure Switch
G3304 and G3306 Engines

Coolant Temperature Switch
G3304 and G3306 Engines

Service Magazine

Maintenance Free Batteries{1401}
1986/03/10

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Use Improved Heat Start Switch{1416}
1987/04/20

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

Improved Start Switch Used{1416}
1987/05/25

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

9G7641 Start Switch Is Improved{1416,1400}
1988/05/16

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

TANK GP-AIR

Operation and Maintenance Manual

Air Tank Moisture and Sediment - Drain
G3300 Engines

TOOLS

Engine News

New Address For Repair Of Diagnostic Tools
1982/06/16

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25

5P957 And 5P3514 Coolant And Battery Tester
1987/04/01

Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01

2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

Testing and Adjusting

Test Tools for the Electrical System
G3304 and G3306 Engines

Troubleshooting

Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors

Service Tools
EMCP3

Service Magazine

New Address For Repair Of Diagnostic Tools{0650}
1982/06/14

6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25

Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/04/01

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

VALVE GP

Specifications

Gas Shutoff Valve
G3304 and G3306 Engines

Testing and Adjusting

Pressure Regulating Valve
G3304 and G3306 Engines

Service Magazine

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

WIRING GP

Engine News

FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18

Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

Operation and Maintenance Manual

Ignition System Spark Plug Wires - Replace - Standard Ignition Systems
G3300 Engines

Special Instruction

Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Technical Information Bulletin

Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)

Tool Operating Manual

Testing and Adjusting

Connector Contact Identification of Generator Set Control
EMCPII+ for Gas Engines

Schematics and Wiring Diagrams
EMCPII+ for Gas Engines

Electrical Connector - Inspect
EMCP3

Wiring Harness (Open Circuit) - Test
EMCP3

Wiring Harness (Short Circuit) - Test
EMCP3

Service Magazine

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

Maintenance Free Batteries{1401}
1986/03/10

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29

Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

CONNECTION GP

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

RELAY GP

Engine News

Magnetic Switches (Starter Relays) Improved
1988/03/01

Special Instruction

Installing the 6I1864 12 VDC, 6I1868 24 VDC, and 6I1908 32 VDC Relay Kit{1422, 1423}
Installing the 6I1864 12 VDC, 6I1868 24 VDC, and 6I1908 32 VDC Relay Kit{1422, 1423}

Service Magazine

Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14

ELECTRONICS GP-MONITOR

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQ^TM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar^® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

HEATER GP

Engine News

Fuel Heaters Are Now Available For Field Installation
1980/01/09

Horizontally Mounted Jacket Water Heater Now Used
1987/05/01

A New Thermostat for the Jacket Water Heater {1383}
2006/09/11

Operation and Maintenance Manual

Cold Weather Starting
G3300 Engines

Jacket Water Heater - Check
G3300 Engines

Service Magazine

Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07

How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18

New Bracket Available For Installation Of Jacket Water Heater{1383}
1979/09/17

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

ELECTRONICS GP-WORK TOOL

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-COMMUNICATION

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

Special Instruction

Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}

Service Magazine

New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15

Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/02/16

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Available for All Cat® Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606}
2014/08/08

New Battery Is Now Used as a Service Replacement for Certain Cat® Products {1401, 1926}
2014/04/24

Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24

Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat® Products with Cat® Product Link 121/321 {7606}
2014/12/24

Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06

Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}
2015/06/26

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
2015/09/11

ELECTRONICS GP-GENERATOR SET

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

METER GP-SERVICE

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

HARNESS GP

Engine News

New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}

Special Instruction

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Tool Operating Manual

Service Magazine

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Truck sale:

133,280

Caterpillar G3306, Construction
- Stationary Generator Sets
HOLT CAT

90,000

Caterpillar G3306, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO

22,500

Caterpillar G3306, Construction
- Petroleum Engines
LOUISIANA CAT POWER SYSTEMS

55,000

Caterpillar G3306, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

CATERPILLAR G3306 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States