AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W1634 GOVERNOR GP-WOODWARD-PSG 24 VOLT. TYPE 3 9Y1589-PAGE 64.08. FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE WHEN USED WITH A GENERATOR. AN ATTACHMENT G3306


FUEL SYSTEM
GOVERNOR GP

GAS ENGINE G3306 GAS ENGINE 07Y
 G3306 ENGINE 07Y00001-04278 SEBP1213 G3306 07Y   (1978)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-WOODWARD
1W-1634 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
1W-1634 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
1W-1634 GOVERNOR GP-WOODWARD
GOVERNOR GP
4W-6815 GOVERNOR GP
GOVERNOR GP
4W-6815 GOVERNOR GP
GOVERNOR GP-WOODWARD
9Y-1589 GOVERNOR GP-WOODWARD
 

#SEBP12130290
 

1W-1634: GOVERNOR GP-WOODWARD

1W1634 GOVERNOR GP-WOODWARD-PSG
24 VOLT. TYPE 3
9Y1589-PAGE 64.08. FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE
WHEN USED WITH A GENERATOR. AN ATTACHMENT
c459011 SEBP1213
1W1634 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-1589 CY [1] GOVERNOR GP-WOODWARD  
2. 8L-4838 [1] LEVER-GOVERNOR OUTPUT  
  3L-1474 [1] PIN-TAPER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12130291
 

4W-6815: GOVERNOR GP

4W6815 GOVERNOR GP-BASIC WOODWARD
TYPE 1
PART OF 1W1633 & 1W1634 GOVERNORS
AN ATTACHMENT
c352758 SEBP1213
4W6815 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3891 [3] WASHER  
2. 5N-3887 [1] PIN  
3. 6N-7530 [1] PIN-PIVOT  
4. 1W-4892 [1] LEVER AS  
5. 6L-4007 [1] VALVE AS-RELIEF (RELIEF)  
6. 6F-3480 [1] SLEEVE AS-ADJUSTABLE  
7. 2N-1894 [1] PIN-SPRING WIRE  
8. 5N-3915 [1] LINK AS  
9. 5N-3890 [1] SHAFT-SPEED ADJUSTABLE  
10. 5N-3885 [1] LINK-SPEED DROOP  
11. 5N-4111 [1] SPACER  
12. 5N-4112 [1] SPRING-TORSION  
13. 5N-3892 [1] BRACKET  
14. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
15. 5N-3913 [1] LEVER-DROOP  
16. 5N-3911 [1] SHAFT AS-DROOP  
17. 5N-3916 [1] SLEEVE AS-ADJUSTABLE  
18. 1N-3316 [3] SEAL-OIL  
19. 4B-2043 [1] NUT  
20. 5N-3883 [1] SCREW-DROOP ADJUSTABLE  
21. 6L-9838 [2] SHAFT-TERMINAL  
22. 3N-5723 [1] SPRING  
23. 3N-5729 [1] SEAT-SPRING  
24. 8N-2276 [1] STOP AS-POWER PISTON  
25. 3N-5728 [1] STRUT-SERVO  
26. 3N-5727 [1] PISTON-POWER  
27. 5N-3889 [1] VALVE-NEEDLE (NEEDLE)  
  5N-3908 [1] PLUG  
28. 5N-3912 [1] CASE AS  
29. 6L-3997 [1] PISTON-BUFFER  
30. 7L-3107 [1] BASE AS-GOVERNOR  
31. 6L-3995 [1] SEAT-SPRING  
32. 6L-3983 [1] GEAR-IDLER (10 TEETH)  
33. 6L-3994 [1] PLUNGER-VALVE  
34. 6L-3992 [1] BUSHING  
35. 7N-0001 [1] BALLHEAD AS  
36. 7N-4533 [1] BEARING-THRUST  
37. 6L-3996 [1] SEAT-SPRING  
38. 7N-6052 [1] SPRING AS-SPEED  
39. 5N-3886 [1] SCREW  
40. 2F-2293 [1] GASKET-COVER  
41. 5N-3909 [1] CLUTCH AS  
42. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
43. 1W-4911 [1] COVER  
44. 9N-6225 [4] SCREW  
45. 8N-7848 C [1] MOTOR AS  
  7N-7779 [1] SOCKET  
  7N-7780 [1] PIN-CONNECTOR  
  7N-9738 [1] HOUSING-RECEPTACLE  
46. 8N-3834 [1] BUSHING-VALVE  
47. 6L-3990 [2] SPRING-BUFFER  
48. 8N-3836 [1] SCREW-BRACKET  
49. 9B-1117 [4] LOCKWASHER  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7N-6807 [1] KIT-HARDWARE (HARDWARE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12130292
 

4W-6815: GOVERNOR GP

4W6815 GOVERNOR GP-BASIC WOODWARD
TYPE 2
PART OF 1W1633 & 1W1634 GOVERNORS
AN ATTACHMENT
c351982 SEBP1213
4W6815 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3891 C [2] WASHER  
2. 5N-3887 [1] PIN  
3. 6N-7530 [1] PIN-PIVOT  
4. 1W-4892 [1] LEVER AS  
5. 6L-4007 [1] VALVE AS-RELIEF (RELIEF)  
6. 6F-3480 [1] SLEEVE AS-ADJUSTABLE  
7. 2N-1894 [1] PIN-SPRING WIRE  
8. 5N-3915 [1] LINK AS  
9. 5N-3890 [1] SHAFT-SPEED ADJUSTABLE  
10. 5N-3885 [1] LINK-SPEED DROOP  
11. 5N-4111 [1] SPACER  
12. 5N-4112 [1] SPRING-TORSION  
13. 5N-3892 [1] BRACKET  
14. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
15. 5N-3913 [1] LEVER-DROOP  
16. 5N-3911 [1] SHAFT AS-DROOP  
17. 5N-3916 [1] SLEEVE AS-ADJUSTABLE  
18. 1N-3316 [3] SEAL-OIL  
19. 4B-2043 [1] NUT  
20. 5N-3883 [1] SCREW-DROOP ADJUSTABLE  
21. 6L-9838 [2] SHAFT-TERMINAL  
22. 3N-5723 [1] SPRING  
23. 3N-5729 [1] SEAT-SPRING  
24. 3B-4502 C [1] LOCKWASHER  
25. 3N-5728 [1] STRUT-SERVO  
26. 3N-5727 [1] PISTON-POWER  
27. 5N-3889 [1] VALVE-NEEDLE (NEEDLE)  
  5N-3908 [1] PLUG  
28. 5N-3912 [1] CASE AS  
29. 6L-3997 [1] PISTON-BUFFER  
30. 7L-3107 [1] BASE AS-GOVERNOR  
31. 6L-3995 [1] SEAT-SPRING  
32. 6L-3983 [1] GEAR-IDLER (10 TEETH)  
33. 6L-3994 [1] PLUNGER-VALVE  
34. 6L-3992 [1] BUSHING  
35. 7N-0001 [1] BALLHEAD AS  
36. 7N-4533 [1] BEARING-THRUST  
37. 6L-3996 [1] SEAT-SPRING  
38. 7N-6052 [1] SPRING AS-SPEED  
39. 5N-3886 [1] SCREW  
40. 2F-2293 [1] GASKET-COVER  
41. 5N-3909 [1] CLUTCH AS  
42. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
43. 1W-4911 [1] COVER  
44. 9N-6225 [4] SCREW  
45. 4W-5123 C [1] MOTOR AS  
  7N-7779 [1] SOCKET  
  7N-7780 [1] PIN-CONNECTOR  
  7N-9738 [1] HOUSING-RECEPTACLE  
46. 5P-5624 BD WIRE (14 GAUGE)  
47. 8N-3834 [1] BUSHING-VALVE  
48. 7W-3625 C [2] SPRING-BUFFER  
49. 3K-6168 C [1] BOLT  
50. 9B-1117 [4] LOCKWASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP12130293
 

9Y-1589: GOVERNOR GP-WOODWARD

9Y1589 GOVERNOR GP-WOODWARD-PART 1 OF 2
24 VOLT, DC
PART OF 1W1634 GOVERNOR
AN ATTACHMENT
c459013 SEBP1213
9Y1589 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5123 [1] MOTOR AS  
  7N-7779 [1] SOCKET  
  7N-7780 [1] PIN-CONNECTOR  
  7N-9738 [1] HOUSING-RECEPTACLE  
2. 9N-6225 [4] SCREW  
  9B-1117 [4] LOCKWASHER  
3. 5N-3909 [1] CLUTCH AS  
4. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
5. 2F-2293 [1] GASKET-COVER  
6. 5N-3886 [1] SCREW  
7. 7N-6052 [1] SPRING AS-SPEED  
8. 6L-3996 [1] SEAT-SPRING  
9. 7N-4533 [1] BEARING-THRUST  
10. 9Y-1799 [1] BALLHEAD AS  
11. 6L-4003 [1] BUSHING-VALVE  
12. 9Y-1987 [1] SEAL  
13. 6L-3994 [1] PLUNGER-VALVE  
14. 8N-3834 [1] BUSHING-VALVE  
15. 6L-3983 [1] GEAR-IDLER (10 TEETH)  
16. 6L-3995 [1] SEAT-SPRING  
17. 7L-3107 [1] BASE AS-GOVERNOR  
18. 7W-3625 [2] SPRING-BUFFER  
19. 6L-3997 [1] PISTON-BUFFER  
20. 5N-3912 [1] CASE AS  
21. 3N-5727 [1] PISTON-POWER  
22. 3N-5728 [1] STRUT-SERVO  
23. 3N-5729 [1] SEAT-SPRING  
24. 3N-5723 [1] SPRING  
25. 1W-4911 [1] COVER  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  7N-6807 [1] KIT-HARDWARE  
 

#SEBP12130294
 

9Y-1589: GOVERNOR GP-WOODWARD

9Y1589 GOVERNOR GP-WOODWARD-PART 2 OF 2
24 VOLT, DC
PART OF 1W1634 GOVERNOR
AN ATTACHMENT
c463333 SEBP1213
9Y1589 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3891 [2] WASHER  
2. 5N-3887 [1] PIN  
3. 6N-7530 [1] PIN-PIVOT  
4. 1W-4892 [1] LEVER AS  
5. 6L-4007 [1] VALVE AS-RELIEF  
6. 6F-3480 [1] SLEEVE AS-ADJUSTABLE  
7. 2N-1894 [1] PIN-SPRING WIRE  
8. 5N-3915 [1] LINK AS  
9. 5N-3890 [1] SHAFT-SPEED ADJUSTABLE  
10. 5N-3885 [1] LINK-SPEED DROOP  
11. 5N-4111 [1] SPACER  
12. 5N-3892 [1] BRACKET  
13. 3K-6168 [1] BOLT  
14. 3B-4502 [1] LOCKWASHER  
15. 5N-3916 [1] SLEEVE AS-ADJUSTABLE  
16. 5N-3913 [1] LEVER-DROOP  
17. 5N-3911 [1] SHAFT AS-DROOP  
18. 4B-2043 [1] NUT  
19. 5N-3883 [1] SCREW-DROOP ADJUSTABLE  
20. 6L-9838 [2] SHAFT-TERMINAL  
21. 1N-3316 [3] SEAL-OIL  
22. 5N-4112 [1] SPRING-TORSION  
23. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
24. 5N-3889 [1] VALVE-NEEDLE  
25. 9Y-1220 [2] PLUG  
26. 2W-0224 [2] SEAL-O-RING  
27. 5N-3908 [1] PLUG  
 

#SEBP12130295
 

7N-2055: GOVERNOR GP-WOODWARD

7N2055 WOODWARD GOVERNOR GROUP
PART OF 7N8431 & 8N2925 WOODWARD GOVERNOR
AN ATTACHMENT
c171627 SEBP1213
7N2055 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3891 [3] WASHER  
2. 5N-3887 [1] PIN  
3. 6N-7530 [1] PIN  
4. 3N-5730 [1] LEVER  
5. 6L-4007 [1] VALVE ASSEM. (relief)  
6. 6F-3480 [1] SLEEVE ASSEM.  
7. 2N-1894 [1] PIN  
8. 5N-3915 [1] LINK ASSEM.  
9. 5N-3890 [1] SHAFT  
10. 5N-3885 [1] LINK  
11. 5N-4111 [1] SPACER  
12. 5N-4112 [1] SPRING  
13. 5N-3892 [1] BRACKET  
14. 3N-4155 [1] SCREW  
  2F-3219 [1] NUT  
  4L-2575 [1] WASHER  
15. 5N-3913 [1] LEVER  
16. 5N-3911 [1] SHAFT ASSEM.  
17. 5N-3916 [1] SLEEVE ASSEM.  
18. 5N-3893 [1] BRACKET  
19. 4B-2043 [1] NUT  
20. 5N-3883 [1] SCREW  
21. 6L-9838 [2] SHAFT  
22. 3N-5723 [1] SPRING  
23. 3N-5729 [1] SEAT  
24. 8N-2276 [1] STOP ASSEM.  
25. 3N-5728 [1] STRUT  
26. 3N-5727 [1] PISTON  
27. 5N-3889 [1] VALVE (needle)  
  5N-3908 [1] PLUG  
28. 5N-3912 [1] CASE ASSEM.  
29. 6L-3997 [1] PISTON  
30. 7L-3107 [1] BASE ASSEM.  
31. 6L-3995 [1] SEAT  
32. 6L-3983 [1] GEAR (10 teeth)  
33. 6L-3994 [1] PLUNGER  
34. 6L-3992 [1] BUSHING  
35. 7N-0001 [1] BALLHEAD ASSEM.  
36. 7N-4533 [1] BEARING  
37. 6L-3996 [1] SEAT  
38. 5R-1802 [1] SPRING ASSEM.  
39. 5N-3886 [1] SCREW  
40. 2F-2293 [2] GASKET  
41. 5N-3909 [1] CLUTCH ASSEM.  
42. 5N-3884 [2] BLOCK  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  7N-6807 [1] KIT (hardware)  
  6L-3789 [1] KIT (gasket)  
 

#SEBP12130296
 

7N-8354: FASTENER GP-GOVERNOR

7N8354 FASTENER GP-WOODWARD GOVERNOR-PART 1 OF 2
REPLACED BY 9Y1978-PAGE 64.16. TYPE 1
FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE
AN ATTACHMENT
c175301 SEBP1213
7N8354 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0086 [1] TUBE ASSEM.  
2. 030-8370 [1] BUSHING  
3. 5K-9244 [1] ELBOW  
4. 6K-1972 [1] ELBOW  
5. 9L-4007 [1] ELBOW  
6. 5P-7039 [1] CONNECTOR  
7. 8N-2427 [1] TUBE ASSEM.  
8. 1B-4202 [2] NUT (.24 thread)  
  1D-4716 [2] NUT (18 thread)  
  9M-1974 [4] WASHER  
9. 7N-9203 [1] GASKET  
10. 0L-1143 [2] BOLT  
11. 1B-4367 [2] BOLT  
12. 6L-3528 [1] GASKET  
13. 7N-3484 [1] TUBE ASSEM.  
14. 3J-7352 [1] FITTING  
  3J-7354 [1] SEAL  
 

#SEBP12130297
 

7N-8354: FASTENER GP-GOVERNOR

7N8354 FASTENER GP-WOODWARD GOVERNOR-PART 2 OF 2
REPLACED BY 9Y1978-PAGE 64.16. TYPE 1
FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE
AN ATTACHMENT
c227292 SEBP1213
7N8354 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-7022 [2] BOLT  
2. 4D-3088 [2] WASHER 4.8MM(.19 IN)THK  
3. 2D-6235 [6] LOCKNUT  
4. 5P-0537 [10] WASHER 2 MM(.079 IN)THK  
5. 5H-1351 [1] PIN-SPRING  
6. 8N-5399 [1] ROD-CARBURETOR CONTROL  
7. 7N-2985 [1] BRACKET AS-LINKAGE  
8. 5S-8055 [1] GASKET  
9. 0S-1594 [3] BOLT  
  5M-2894 [3] WASHER  
10. 7L-4964 [2] FITTING-DRIVE  
11. 7N-3477 [1] ROD-CONTROL  
12. 6L-3353 [4] ROD END-BEARING  
13. 5H-2532 [2] KEY-WOODRUFF  
14. 7N-2984 [1] SHAFT-CARBURETOR CONTROL  
15. 5B-2968 [2] WASHER  
16. 3B-4617 [2] COTTER  
17. 9F-8249 [2] LEVER-CONTROL  
18. 2A-5546 [2] BOLT  
19. 1A-8285 [4] NUT-JAM  
20. 7B-2742 [2] BOLT  
21. 7L-6910 [2] BEARING  
 

#SEBP12130298
 

7N-8354: FASTENER GP-GOVERNOR

7N8354 FASTENER GP-WOODWARD GOVERNOR-PART 1 OF 2
REPLACED BY 9Y1978-PAGE 64.16. TYPE 2
FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE
AN ATTACHMENT
c407863 SEBP1213
7N8354 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0086 [1] TUBE AS-INLET  
2. 030-8370 [1] ADAPTER-PIPE  
3. 5K-9244 [1] ELBOW-FLARED  
4. 6K-1972 [1] ELBOW-FLARED  
5. 9L-4007 C [1] ELBOW-FLARED  
6. 5P-7039 [1] CONNECTOR-FLARED  
7. 8N-2427 [1] TUBE AS-OIL DRAIN  
8. 1B-4202 [2] NUT (5/16-24 THD)  
  1D-4716 [2] NUT-FULL (5/16-18 THD)  
  9M-1974 [4] WASHER  
9. 7N-9203 [1] GASKET  
10. 0L-1143 [2] BOLT  
11. 1B-4367 [2] BOLT  
12. 6L-3528 [1] GASKET-GOVERNOR MOUNTING  
13. 7N-3484 [1] TUBE AS-GOVERNOR  
14. 3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12130299
 

7N-8354: FASTENER GP-GOVERNOR

7N8354 FASTENER GP-WOODWARD GOVERNOR-PART 2 OF 2
REPLACED BY 9Y1978-PAGE 64.16. TYPE 2
FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE
AN ATTACHMENT
c227292 SEBP1213
7N8354 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-7022 [2] BOLT  
2. 4D-3088 [2] WASHER 4.8MM(.19 IN)THK  
3. 2D-6235 [6] LOCKNUT  
4. 5P-0537 [10] WASHER 2 MM(.079 IN)THK  
5. 5H-1351 [1] PIN-SPRING  
6. 8N-5399 [1] ROD-CARBURETOR CONTROL  
7. 7N-2985 [1] BRACKET AS-LINKAGE  
8. 5S-8055 [1] GASKET  
9. 0S-1594 [3] BOLT  
  5M-2894 [3] WASHER  
10. 7L-4964 [2] FITTING-DRIVE  
11. 7N-3477 [1] ROD-CONTROL  
12. 6L-3353 [4] ROD END-BEARING  
13. 5H-2532 [2] KEY-WOODRUFF  
14. 7N-2984 [1] SHAFT-CARBURETOR CONTROL  
15. 5B-2968 [2] WASHER  
16. 3B-4617 [2] COTTER  
17. 9F-8249 [2] LEVER-CONTROL  
18. 2A-5546 [2] BOLT  
19. 1A-8285 [4] NUT-JAM  
20. 7B-2742 [2] BOLT  
21. 7L-6910 [2] BEARING  
 

Information:

Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Governor Drive Gears And Weight Assemblies
1983/09/14
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
New Governor Drive Group Has Longer Service Life
1985/05/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
New Governor Control Assembly Helps Prevent Overspeed On Startup{1264}
1995/11/20
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Error In The Testing And Adjusting Manuals For Fuel System Adjustment Timing Pin {1272}
1996/09/23
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
G3300 Engines
Governors and Actuators
G3300 Engines
Governor - Inspect
G3300 Engines
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor
G3304 and G3306 Engines
Governor Control
G3304 and G3306 Engines
Governor Linkage - Woodward PSG Governor For Turbocharged Engines
G3304 and G3306 Engines
Governor Linkage
G3304 and G3306 Engines
Governor Linkage - Woodward PSG Governor For Naturally Aspirated Engine
G3304 and G3306 Engines
Testing and Adjusting
Governor - Adjust
G3304 and G3306 Engines
Disassembly and Assembly
Governor And Governor Drive
3306 NATURAL GAS ENGINE
Governor
3306 NATURAL GAS ENGINE
Governor Drive
3306 NATURAL GAS ENGINE
Governor And Governor Drive
3304 & 3306 NATURAL GAS ENGINES
Governor
3304 & 3306 NATURAL GAS ENGINES
Governor Drive
3304 & 3306 NATURAL GAS ENGINES
Governor and Governor Drive - Remove
G3304 and G3306 Engines
Governor and Governor Drive - Install
G3304 and G3306 Engines
Governor and Governor Drive - Separate
G3304 and G3306 Engines
Governor and Governor Drive - Connect
G3304 and G3306 Engines
Governor - Disassemble
G3304 and G3306 Engines
Governor - Assemble
G3304 and G3306 Engines
Governor Drive - Disassemble
G3304 and G3306 Engines
Governor Drive - Assemble
G3304 and G3306 Engines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Governor Drive Group Has Longer Service Life{1289,1264}
1985/05/06
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog G3306 :

GOVERNOR GP-WOODWARD
1W-1634 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
1W-1634 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
1W-1633 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
1W-1633 GOVERNOR GP-WOODWARD
GOVERNOR GP
1W-1632 GOVERNOR GP
GOVERNOR GP
1W-1632 GOVERNOR GP
SWITCH GP-WOODWARD GOVERNOR
8N-6670 SWITCH GP-WOODWARD GOVERNOR
GOVERNOR GP-WOODWARD
7N-8431 GOVERNOR GP-WOODWARD
GOVERNOR GP
4W-6815 GOVERNOR GP
GOVERNOR GP
4W-6815 GOVERNOR GP
GOVERNOR GP-WOODWARD
9Y-1589 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
9Y-1589 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
7N-2055 GOVERNOR GP-WOODWARD
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR

Truck sale:

Caterpillar G3306, Construction
133,280 
Caterpillar G3306, Construction
- Stationary Generator Sets
HOLT CAT
Caterpillar G3306, Construction
90,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3306, Construction
22,500 
Caterpillar G3306, Construction
- Petroleum Engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar G3306, Construction
55,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
CATERPILLAR G3306 2014
 
CATERPILLAR G3306 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.