AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y1978 FASTENER GP-WOODWARD GOVERNOR AN ATTACHMENT G3306 GAS ENGINE


FUEL SYSTEM
GOVERNOR GP

GAS ENGINE G3306 GAS ENGINE 07Y
 G3306 ENGINE 07Y00001-04278 SEBP1213 G3306 07Y   (1978)

FUEL SYSTEM

GOVERNOR GP
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
FASTENER GP-WOODWARD GOVERNOR
9Y-1978 FASTENER GP-WOODWARD GOVERNOR
FASTENER GP-GOVERNOR
7N-8341 FASTENER GP-GOVERNOR
DRIVE GP-GOVERNOR
7N-8369 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-8977 DRIVE GP-GOVERNOR
 

#SEBP12130300
 

9Y-1978: FASTENER GP-WOODWARD GOVERNOR

9Y1978 FASTENER GP-WOODWARD GOVERNOR
AN ATTACHMENT
c473354 SEBP1213
9Y1978 FASTENER GP-WOODWARD GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0086 [1] TUBE AS-INLET  
2. 030-8370 [1] ADAPTER-PIPE  
3. 5K-9244 [1] ELBOW-FLARED  
4. 6K-1972 [1] ELBOW-FLARED  
5. 9L-4007 [1] ELBOW-FLARED  
6. 5P-7039 [1] CONNECTOR-FLARED  
7. 8N-2427 [1] TUBE AS-OIL DRAIN  
8. 1B-4202 [4] NUT (5/16-24 THD)  
9. 7N-9203 [1] GASKET  
10. 0L-1143 [2] BOLT  
11. 1B-4367 [2] BOLT  
12. 6L-3528 [1] GASKET-GOVERNOR MOUNTING  
13. 7N-3484 [1] TUBE AS-GOVERNOR  
14. 3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
15. 9Y-1977 [1] ROD-CARBURETOR CONTROL  
16. 7B-8167 [1] BOLT  
17. 5G-2003 [2] SPACER  
18. 2D-6235 [2] LOCKNUT  
19. 5P-0537 [4] WASHER  
20. 5H-1351 [1] PIN-SPRING  
21. 6L-3353 [2] ROD END-BEARING  
22. 1D-4716 [2] NUT-FULL (5/16-18 THD)  
  9M-1974 [4] WASHER  
23. 1B-2713 [1] BOLT  
 

#SEBP12130301
 

7N-8341: FASTENER GP-GOVERNOR

7N8341 WOODWARD GOVERNOR FASTENER GROUP
FOR USE WITH NATURALLY ASPIRATED ENGINE
AN ATTACHMENT
c630946 SEBP1213
7N8341 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4367 [2] BOLT  
2. 0L-1143 [2] BOLT  
3. 7N-9203 [1] GASKET  
4. 6L-3528 [1] GASKET-GOVERNOR  
5. 3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
6. 8N-2826 C [1] ROD-WOODWARD CONTROL  
7. 5H-1351 [1] PIN-SPRING  
8. 7B-8167 C [2] BOLT  
9. 2D-6235 [2] LOCKNUT  
10. 5P-0537 [4] WASHER  
11. 1A-8285 [2] NUT-JAM  
12. 5F-3106 [1] SEAL-O-RING  
13. 2V-8652 C [2] SPACER  
14. 6L-3353 [2] END-ROD  
15. 7N-3484 [1] TUBE AS-GOVERNOR  
16. 9X-7378 [1] SEAL  
17. 5P-2645 [2] ELBOW  
18. 6K-1972 [1] ELBOW-FLARED  
19. 9S-8751 [2] NUT-FULL  
20. 9M-1974 C [8] WASHER-HARD  
21. 5S-0003 [2] NUT-FULL  
22. 131-1706 [1] TUBE AS-OIL DRAIN  
23. 8N-1004 [1] COVER-ACCESSORY  
24. 0S-1589 [2] BOLT  
  5P-8247 [2] WASHER-HARD  
25. 6B-5072 [1] BUSHING-TERMINAL  
26. 2N-8037 [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12130302
 

7N-8369: DRIVE GP-GOVERNOR

7N8369 WOODWARD GOVERNOR DRIVE GROUP-PSG
REPLACED BY 1W8977 PAGE 66.01
AN ATTACHMENT
c219727 SEBP1213
7N8369 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4538 [2] BOLT  
2. 7N-2289 [1] GEAR (36 teeth)  
3. 7N-8244 [1] GEAR ASSEM. (47 teeth)  
    (Includes)
4. 9M-7128 [1] BEARING  
5. 5P-9287 [1] WASHER  
6. 7N-3825 [1] ADAPTER ASSEM.  
    (Includes)
7. 6B-6470 [2] STUD  
8. 2H-1190 [2] DOWEL  
9. 0S-1614 [1] BOLT  
10. 7N-2291 [1] GEAR (64 teeth)  
11. 8S-9191 [1] BOLT  
12. 7N-3826 [1] GASKET  
13. 7N-3824 [1] HOUSING ASSEM.  
    (Includes)
14. 4D-0514 [1] PLUG  
15. 4L-7547 [2] STUD  
16. 8M-7753 [1] BEARING  
17. 7N-3823 [1] SHAFT  
18. 7N-3827 [1] GASKET  
19. 7N-3828 [1] COVER  
20. 9M-1974 [5] WASHER  
21. 1A-9579 [5] BOLT  
 

#SEBP12130303
 

1W-8977: DRIVE GP-GOVERNOR

1W8977 WOODWARD GOVERNOR DRIVE GROUP-PSG
TYPE 1
AN ATTACHMENT
c306097 SEBP1213
1W8977 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4538 [2] BOLT  
2. 7N-2289 [1] GEAR (36 teeth)  
3. 7N-8244 [1] GEAR ASSEM. (47 teeth)  
    (Includes)
4. 9M-7128 [1] BEARING  
5. 5P-9287 [1] WASHER  
6. 1W-8976 [1] ADAPTER ASSEM.  
    (Includes)
7. 6B-6470 [2] STUD  
8. 2H-1190 [2] DOWEL  
9. 0S-1614 [1] BOLT  
10. 7N-2291 [1] GEAR (64 teeth)  
11. 8S-9191 [1] BOLT  
12. 7N-3826 [1] GASKET  
13. 7N-3824 [1] HOUSING ASSEM.  
    (Includes)
14. 4D-0514 [1] PLUG  
15. 4L-7547 [2] STUD  
16. 8M-7753 [1] BEARING  
17. 7N-3823 [1] SHAFT  
18. 7N-3827 [1] GASKET  
19. 7N-3828 [1] COVER  
20. 9M-1974 [5] WASHER  
21. 1A-9579 [5] BOLT  
 

#SEBP12130304
 

1W-8977: DRIVE GP-GOVERNOR

1W8977 GOVERNOR DRIVE GROUP-WOODWARD-PSG
TYPE 2
AN ATTACHMENT
c329861 SEBP1213
1W8977 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4538 [2] BOLT  
2. 4W-1464 C [1] GEAR (36 TEETH)  
3. 4W-1470 C [1] GEAR AS (47 TEETH)  
4. 9M-7128 [1] BEARING-SLEEVE  
5. 5P-9287 [1] WASHER-HARD  
6. 1W-8976 [1] ADAPTER AS-DRIVE  
7. 6B-6470 [2] STUD  
8. 2H-1190 [2] PIN-DOWEL  
9. 0S-1614 [1] BOLT  
10. 4W-1466 C [1] GEAR (64 TEETH)  
11. 4F-7226 C [1] BOLT  
12. 7N-3826 [1] GASKET  
13. 7N-3824 [1] HOUSING AS-DRIVE  
14. 4D-0514 [1] PLUG-PIPE  
15. 4L-7547 [2] STUD-TAPERLOCK  
16. 8M-7753 [1] BEARING-SLEEVE  
17. 7N-3823 [1] SHAFT  
18. 7N-3827 [1] GASKET  
19. 7N-3828 [1] COVER  
20. 9M-1974 [5] WASHER  
21. 1A-9579 [5] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12130305
 

7N-4360: DRIVE GP-GOVERNOR

7N4360 GOVERNOR DRIVE GROUP
TYPE 1
AN ATTACHMENT
c218673 SEBP1213
7N4360 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3426 [1] FITTING  
2. 3J-7354 [1] SEAL  
3. 7N-2372 [1] SHAFT  
4. 3S-1208 [1] WASHER  
5. 8M-2337 [1] WASHER  
6. 8B-2377 [1] BOLT  
7. 7L-0155 [1] GEAR  
8. 3N-4292 [1] BOLT  
  2R-0504 [1] NUT  
9. 7N-3093 [1] TUBE ASSEM.  
10. 6K-1972 [1] FITTING  
11. 5M-6228 [1] BEARING  
12. 3H-2023 [1] DOWEL  
13. 1F-4622 [1] BEARING  
14. 2M-2489 [1] SEAL  
15. 7N-2977 [1] SHAFT  
16. 5B-4688 [1] PIN  
17. 2N-2170 [1] LEVER  
18. 3B-1915 [3] BOLT  
19. 2F-4547 [4] DOWEL  
20. 8L-6376 [1] BEARING  
21. 7N-1931 [1] HOUSING  
22. 2P-0220 [1] GASKET  
23. 7N-2374 [1] SHAFT ASSEM.  
24. 0S-1589 [2] BOLT  
25. 3N-4293 [1] LEVER  
 

#SEBP12130306
 

7N-4360: DRIVE GP-GOVERNOR

7N4360 GOVERNOR DRIVE GROUP
TYPE 2
AN ATTACHMENT
c306670 SEBP1213
7N4360 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3426 [1] ELBOW  
2. 3J-7354 [1] SEAL-O-RING  
3. 7N-2372 [1] SHAFT-RACK CONTROL  
4. 3S-1208 [1] WASHER-CONICAL  
5. 8M-2337 [1] WASHER  
6. 8B-2377 [1] BOLT  
7. 7L-0155 [1] GEAR-GOVERNOR DRIVE (36 TEETH)  
8. 3N-4292 [1] BOLT-LEVER  
  2R-0504 [1] NUT  
9. 7N-3093 [1] TUBE AS  
10. 6K-1972 [1] ELBOW-FLARED  
11. 5M-6228 [1] BEARING-NEEDLE  
12. 3H-2023 [1] DOWEL  
13. 1F-4622 [1] BEARING-NEEDLE  
14. 2M-2489 [1] SEAL-LIP TYPE  
15. 7N-2977 [1] SHAFT-GOVERNOR OUTPUT  
16. 5B-4688 [1] PIN-TAPER  
17. 2N-2170 [1] LEVER-GOVERNOR OUTPUT  
18. 3B-1915 [3] BOLT  
19. 2F-4547 [4] PIN-DOWEL  
20. 8L-6376 [1] BEARING-SLEEVE  
21. 1W-9112 [1] HOUSING AS-DRIVE  
22. 2P-0220 [1] GASKET-PUMP  
23. 7N-2374 [1] SHAFT AS-GOVERNOR DRIVE  
24. 0S-1589 [2] BOLT  
25. 3N-4293 [1] LEVER-GOVERNOR  
 

#SEBP12130307
 

7N-4360: DRIVE GP-GOVERNOR

7N4360 GOVERNOR DRIVE GROUP
TYPE 3
AN ATTACHMENT
c309545 SEBP1213
7N4360 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3426 C [1] ELBOW  
2. 3J-7354 [1] SEAL-O-RING  
3. 7N-2372 C [1] SHAFT-RACK CONTROL  
4. 3S-1208 [1] WASHER-CONICAL  
5. 8M-2337 [1] WASHER  
6. 8B-2377 [1] BOLT  
7. 1W-0936 [1] GEAR-GOVERNOR DRIVE (29 TEETH)  
8. 3N-4292 [1] BOLT-LEVER  
  2R-0504 [1] NUT  
9. 7N-3093 C [1] TUBE AS  
10. 6K-1972 [1] ELBOW-FLARED  
11. 5M-6228 [1] BEARING-NEEDLE  
12. 3H-2023 [1] DOWEL  
13. 1F-4622 [1] BEARING-NEEDLE  
14. 2M-2489 [1] SEAL-LIP TYPE  
15. 7N-2977 [1] SHAFT-GOVERNOR OUTPUT  
16. 5B-4688 [1] PIN-TAPER  
17. 2N-2170 [1] LEVER-GOVERNOR OUTPUT  
18. 3B-1915 [3] BOLT  
19. 2F-4547 [4] PIN-DOWEL  
20. 8L-6376 [1] BEARING-SLEEVE  
21. 1W-9112 [1] HOUSING AS-DRIVE  
22. 2P-0220 [1] GASKET-PUMP  
23. 7N-2374 [1] SHAFT AS-GOVERNOR DRIVE  
24. 0S-1589 [2] BOLT  
25. 3N-4293 [1] LEVER-GOVERNOR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12130308
 

7W-5383: DRIVE GP-GOVERNOR

7W5383 GOVERNOR DRIVE GROUP-WOODWARD-PSG
AN ATTACHMENT
c510949 SEBP1213
7W5383 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4538 [1] BOLT  
2. 7W-5418 [1] GEAR (36 TEETH)  
3. 7W-5378 [1] GEAR AS (45 TEETH)  
4. 9M-7128 [1] BEARING-SLEEVE  
5. 5P-9287 [1] WASHER-HARD  
6. 7W-5382 [1] ADAPTER AS-DRIVE  
7. 6B-6470 [2] STUD  
8. 2H-1190 [2] PIN-DOWEL  
9. 0S-1614 [1] BOLT  
10. 7W-5419 [1] GEAR (64 TEETH)  
11. 4F-7226 [1] BOLT  
12. 7N-3826 [1] GASKET  
13. 7W-5380 [1] HOUSING AS-DRIVE  
14. 4D-0514 [1] PLUG-PIPE  
15. 4L-7547 [2] STUD-TAPERLOCK  
16. 8M-7753 [1] BEARING-SLEEVE  
17. 7W-5376 [1] SHAFT  
18. 7N-3827 [1] GASKET  
19. 7N-3828 [1] COVER  
20. 9M-1974 [5] WASHER  
21. 1A-9579 [5] BOLT  
22. 4B-3388 [1] BOLT  
 

#SEBP12130309
 

8N-2379: DRIVE GP-GOVERNOR

8N2379 GOVERNOR DRIVE GROUP
TYPE 1
AN ATTACHMENT
c173195 SEBP1213
8N2379 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3426 [1] ELBOW  
2. 3J-7354 [1] SEAL-O-RING  
3. 7N-2372 [1] SHAFT-RACK CONTROL  
4. 3S-1208 [1] WASHER-CONICAL  
5. 8M-2337 [1] WASHER  
6. 8B-2377 [1] BOLT  
7. 7L-0155 [1] GEAR-GOVERNOR DRIVE (36 TEETH)  
8. 3N-4292 [1] BOLT-LEVER  
  2R-0504 [1] NUT  
9. 7N-3093 [1] TUBE AS  
10. 6K-1972 [1] ELBOW-FLARED  
11. 5M-6228 [1] BEARING-NEEDLE  
12. 3H-2023 [1] DOWEL  
13. 1F-4622 [1] BEARING-NEEDLE  
14. 2M-2489 [1] SEAL-LIP TYPE  
15. 7N-2977 [1] SHAFT-GOVERNOR OUTPUT  
16. 5B-4688 [1] PIN-TAPER  
17. 2N-2170 [1] LEVER-GOVERNOR OUTPUT  
18. 3B-1915 [3] BOLT  
19. 7N-1931 [1] HOUSING-GOVERNOR DRIVE  
20. 2F-4547 [4] PIN-DOWEL  
21. 8L-6376 [1] BEARING-SLEEVE  
22. 2P-0220 [1] GASKET-PUMP  
23. 7N-2374 [1] SHAFT AS-GOVERNOR DRIVE  
24. 0S-1589 [2] BOLT  
25. 3N-4293 [1] LEVER-GOVERNOR  
26. 6B-5072 [1] BUSHING  
 

Information:

Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Governor Drive Gears And Weight Assemblies
1983/09/14
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
New Governor Drive Group Has Longer Service Life
1985/05/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
New Governor Control Assembly Helps Prevent Overspeed On Startup{1264}
1995/11/20
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Error In The Testing And Adjusting Manuals For Fuel System Adjustment Timing Pin {1272}
1996/09/23
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
G3300 Engines
Governors and Actuators
G3300 Engines
Governor - Inspect
G3300 Engines
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor
G3304 and G3306 Engines
Governor Control
G3304 and G3306 Engines
Governor Linkage - Woodward PSG Governor For Turbocharged Engines
G3304 and G3306 Engines
Governor Linkage
G3304 and G3306 Engines
Governor Linkage - Woodward PSG Governor For Naturally Aspirated Engine
G3304 and G3306 Engines
Testing and Adjusting
Governor - Adjust
G3304 and G3306 Engines
Disassembly and Assembly
Governor And Governor Drive
3306 NATURAL GAS ENGINE
Governor
3306 NATURAL GAS ENGINE
Governor Drive
3306 NATURAL GAS ENGINE
Governor And Governor Drive
3304 & 3306 NATURAL GAS ENGINES
Governor
3304 & 3306 NATURAL GAS ENGINES
Governor Drive
3304 & 3306 NATURAL GAS ENGINES
Governor and Governor Drive - Remove
G3304 and G3306 Engines
Governor and Governor Drive - Install
G3304 and G3306 Engines
Governor and Governor Drive - Separate
G3304 and G3306 Engines
Governor and Governor Drive - Connect
G3304 and G3306 Engines
Governor - Disassemble
G3304 and G3306 Engines
Governor - Assemble
G3304 and G3306 Engines
Governor Drive - Disassemble
G3304 and G3306 Engines
Governor Drive - Assemble
G3304 and G3306 Engines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Governor Drive Group Has Longer Service Life{1289,1264}
1985/05/06
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog G3306 :

FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
FASTENER GP-GOVERNOR
7N-8354 FASTENER GP-GOVERNOR
GOVERNOR GP-WOODWARD
7N-2055 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
9Y-1589 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
9Y-1589 GOVERNOR GP-WOODWARD
GOVERNOR GP
4W-6815 GOVERNOR GP
FASTENER GP-GOVERNOR
7N-8341 FASTENER GP-GOVERNOR
DRIVE GP-GOVERNOR
7N-8369 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-8977 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-8977 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7N-4360 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7N-4360 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7N-4360 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7W-5383 DRIVE GP-GOVERNOR

Truck sale:

Caterpillar G3306, Construction
133,280 
Caterpillar G3306, Construction
- Stationary Generator Sets
HOLT CAT
Caterpillar G3306, Construction
90,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3306, Construction
22,500 
Caterpillar G3306, Construction
- Petroleum Engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar G3306, Construction
55,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
CATERPILLAR G3306 2014
 
CATERPILLAR G3306 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.