AVSPARE.COM
parts catalog

2V2352 BATTERY AND WIRING GROUP-PART 1 OF 3 SERIAL NO. 63X817-63X902,904,906-917,919-950,952-970,972-975,977,978,982, 985,987,988,993-995,998,1002 & 63X1006 INCLUSIVE. 4V7042 HARNESS PARTS ARE SHOWN ON PAGE 74 980C




ELECTRICAL AND STARTING SYSTEM

BATTERY GP
 
#SEBP12160290
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 1 OF 3
SERIAL NO. 63X817-63X902,904,906-917,919-950,952-970,972-975,977,978,982,
985,987,988,993-995,998,1002 & 63X1006 INCLUSIVE. 4V7042 HARNESS PARTS ARE
SHOWN ON PAGE 74
c232097 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-8719 [1] PLATE  
2. 3V-8716 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 200 cm(78.44 in.)  
3. 3S-6050 [1] TERMINAL ASSEM. (-)  
4. 3S-6049 [1] TERMINAL ASSEM. (+)  
    (Each Includes)
5. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
6. 5R-3231 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 285 cm(112.21 in.)  
  3S-6049 [1] TERMINAL (+)  
    (Includes)
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
7. 1S-7251 [1] TERMINAL (to starter)  
8. 4D-7794 [4] CLIP  
9. 4V-7042 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
10. 7N-1062 [2] SWITCH ASSEM. (pressure)  
11. 3B-7764 [1] BUSHING  
12. 5H-8936 [1] ADAPTER  
13. 2V-5116 [1] SWITCH (temperature)  
14. 3K-0360 [1] SEAL  
15. 1D-4717 [2] NUT  
16. 4S-1962 [2] CLIP  
17. 4V-0664 [1] HARNESS ASSEM.  
    (Includes)
  5P-5623 H WIRE (16 gauge)  
  5P-5624 H WIRE (14 gauge)  
  5P-3160 [1] CONNECTOR  
18. 6N-9587 [1] CONNECTOR  
19. 5V-2954 [1] HARNESS ASSEM.  
    (Includes)
  5P-5623 H WIRE (16 gauge)  
20. 5P-1475 [2] TERMINAL  
21. 5P-1477 [2] TERMINAL  
22. 5P-1075 [2] WASHER  
23. 3K-4922 [1] CABLE ASSEM.  
    (Includes)
  [1] TERMINAL  
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
24. 2M-0913 TERMINAL (to disconnect)  
25. 5P-8440 [1] GROMMET  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 
#SEBP12160291
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 2 OF 3
SERIAL NO. 63X817-63X902,904,906-917,919-950,952-970,972-975,977,978,982,
985,987,988,993-995,998,1002 & 63X1006 INCLUSIVE. 7N718, 2V9095 SWITCH &
5V3833 HARNESS PARTS ARE SHOWN ON PAGES 71, 73A & 73B
c176370 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-2430 [8] BOLT  
  2K-4973 [8] LOCKNUT  
2. 4D-1936 [1] HOLDDOWN ASSEM.  
3. 5V-3833 CY [1] HARNESS ASSEM.  
    (Separate Illustration)
4. 1D-4717 [8] NUT  
5. 5P-1075 [13] WASHER  
6. 3S-8624 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 J CABLE 27.94 cm(11 in.)  
  1S-7252 [1] TERMINAL (to disconnect)  
  1S-7251 [1] TERMINAL (to starter)  
7. 7N-0718 Y [1] SWITCH (disconnect)  
    (Separate Illustration)
8. 3V-8717 [1] PLATE  
9. 7M-9234 [1] WIRE ASSEM.  
    (Includes)
  5P-6641 H WIRE .203 m(8 in.)  
  7H-1182 [2] TERMINAL  
10. 2N-7744 [1] SWITCH ASSEM. (pressure)  
11. 3S-2093 [20] STRAP  
12. 4D-4785 [1] SWITCH ASSEM.  
13. 7N-4594 C [1] SWITCH ASSEM. (diff pressure)  
14. 4V-6977 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 H WIRE 2.2 m(86.62 in.)  
15. 4V-6976 [1] TUBE  
16. 7K-4474 [1] TERMINAL (male)  
17. 8F-8513 [2] CLIP  
  4F-4879 [2] BOLT  
18. 4B-4278 C [8] WASHER  
19. 2V-9095 Y [1] SWITCH ASSEM.  
    (Separate Illustration)
20. 0T-0102 [3] BOLT  
21. 1V-9373 [1] COVER  
22. 9H-8890 [1] GASKET  
23. 7K-6416 [1] GROMMET  
24. 5K-8451 [2] CLIP  
25. 0S-0509 [4] BOLT  
  5M-2894 [4] WASHER  
26. 9M-5775 [2] MAT  
27. 4S-9219 [2] BATTERY  
    (Each Includes)
  7S-5041 [6] PLUG  
28. 1D-4719 [1] NUT  
  4B-4280 [1] WASHER  
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 
#SEBP12160292
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 3 OF 3
SERIAL NO. 63X817-63X902,904,906-917,919-950,952-970,972-975,977,978,982,
985,987,988,993-995,998,1002 & 63X1006 INCLUSIVE
c172247 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3279 C [1] RELAY  
2. 2A-0762 C [8] BOLT  
  2D-6235 C [8] LOCKNUT  
  1H-3338 C [8] LOCKWASHER  
3. 4V-0449 [1] PLATE ASSEM.  
    (Includes)
4. 9F-2978 [2] NUT  
5. 7N-5933 [1] SWITCH (magnetic)  
6. 9F-3099 [1] SWITCH (magnetic)  
    (Includes)
7. 4F-2294 [4] NUT  
  8F-0908 [4] WASHER  
  3L-6789 [4] LOCKWASHER  
8. 4B-2043 [4] NUT  
  3B-4501 [4] LOCKWASHER  
9. 2V-9473 C [1] DIODE ASSEM.  
10. 0S-0509 [1] BOLT  
  5P-1075 [1] WASHER  
11. 7D-7233 [1] CLIP  
12. 2V-2380 [1] CIRCUIT BREAKER (60 amp)  
13. 4B-8626 [2] SCREW  
  4B-2047 [2] NUT  
  8F-1434 [2] LOCKWASHER  
14. 9D-8661 [1] RELAY  
15. 7N-1621 C [1] CIRCUIT BREAKER (3 amp)  
16. 3K-8106 [4] SCREW  
17. 9B-7233 [4] LOCKWASHER  
  4B-4863 [4] WASHER  
18. 3R-8920 [1] CIRCUIT BREAKER ( 8 amp)  
  C   INDICATES CHANGE
 
#SEBP12160293
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 1 OF 3
SERIAL NO. 63X903,905,918,951,971,976,979-981,983,984,986,989-992,996,
997,999-1001,1003-1005 & 63X1007-63X1638 INCLUSIVE
4V7042 HARNESS PARTS ARE SHOWN ON PAGE 74
c232097 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-8719 [1] PLATE  
2. 3V-8716 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 200 cm(78.44 in.)  
3. 3S-6050 [1] TERMINAL ASSEM. (-)  
4. 3S-6049 [1] TERMINAL ASSEM. (+)  
    (Each Includes)
5. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
6. 5R-3231 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 285 cm(112.21 in.)  
  3S-6049 [1] TERMINAL (+)  
    (Includes)
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
7. 1S-7251 [1] TERMINAL (to starter)  
8. 4D-7794 [4] CLIP  
9. 4V-7042 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
10. 7N-1062 [2] SWITCH ASSEM. (pressure)  
11. 3B-7764 [1] BUSHING  
12. 5H-8936 [1] ADAPTER  
13. 2V-5116 [1] SWITCH (temperature)  
14. 3K-0360 [1] SEAL  
15. 1D-4717 [2] NUT  
16. 4S-1962 [2] CLIP  
17. 4V-0664 [1] HARNESS ASSEM.  
    (Includes)
  5P-5623 H WIRE (16 gauge)  
  5P-5624 H WIRE (14 gauge)  
  5P-3160 [1] CONNECTOR  
18. 6N-9587 [1] CONNECTOR  
19. 5V-2954 [1] HARNESS ASSEM.  
    (Includes)
  5P-5623 H WIRE (16 gauge)  
20. 5P-1475 [2] TERMINAL  
21. 5P-1477 [2] TERMINAL  
22. 5P-1075 [2] WASHER  
23. 3K-4922 [1] CABLE ASSEM.  
    (Includes)
  [1] TERMINAL  
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
24. 2M-0913 TERMINAL (to disconnect)  
25. 5P-8440 [1] GROMMET  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 
#SEBP12160294
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 2 OF 3
SERIAL NO. 63X903,905,918,951,971,976,979-981,983,984,986,989-992,996,
997,999-1001,1003-1005 & 63X1007-63X1638 INCLUSIVE. 7N718, 2V9095 SWITCH &
5V3833 HARNESS PARTS ARE SHOWN ON PAGES 71, 73A & 73B
c176371 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-2430 [8] BOLT  
  2K-4973 [8] LOCKNUT  
2. 4D-1936 [1] HOLDDOWN ASSEM.  
3. 5V-3833 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
4. 1D-4717 [8] NUT  
5. 5P-1075 [13] WASHER  
6. 3S-8624 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 J CABLE 27.94 cm(11 in.)  
  1S-7252 [1] TERMINAL (to disconnect)  
  1S-7251 [1] TERMINAL (to starter)  
7. 7N-0718 Y [1] SWITCH (disconnect)  
    (Separate Illustration)
8. 3V-8717 [1] PLATE  
9. 7M-9234 [1] WIRE ASSEM.  
    (Includes)
  5P-6641 H WIRE .203 m(8 in.)  
  7H-1182 [2] TERMINAL  
10. 2N-7744 [1] SWITCH ASSEM. (pressure)  
11. 3S-2093 [20] STRAP  
12. 4D-4785 [1] SWITCH ASSEM.  
13. 7N-4594 C [1] SWITCH ASSEM. (diff. pressure)  
14. 4V-6977 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 H WIRE 2.2 m(86.62 in.)  
15. 4V-6976 [1] TUBE  
16. 7K-4474 [1] TERMINAL (male)  
17. 8F-8513 [2] CLIP  
  4F-4879 [2] BOLT  
18. 4B-4278 [8] WASHER  
19. 2V-9095 Y [1] SWITCH ASSEM.  
    (Separate Illustration)
20. 0T-0102 [3] BOLT  
21. 1V-9373 [1] COVER  
22. 9H-8890 [1] GASKET  
23. 7K-6416 [1] GROMMET  
24. 5K-8451 [2] CLIP  
25. 0S-0509 [4] BOLT  
  5M-2894 [4] WASHER  
26. 9M-5775 [2] MAT  
27. 4S-9219 [2] BATTERY  
    (Each Includes)
  7S-5041 [6] PLUG  
28. 1D-4719 [1] NUT  
  4B-4280 [1] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 
#SEBP12160295
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 3 OF 3
SERIAL NO. 63X903,905,918,951,971,976,979-981,983,984,986,989-992,996,997,
999-1001,1003-1005 & 63X1007-63X1638 INCLUSIVE
c173888 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-8663 C [1] RELAY ASSEM.  
2. 2A-0762 [8] BOLT  
  2D-6235 [8] LOCKNUT  
  1H-3338 [8] LOCKWASHER  
3. 4V-0449 [1] PLATE ASSEM.  
    (Includes)
4. 9F-2978 [2] NUT  
5. 7N-5933 [1] SWITCH (magnetic)  
6. 9F-3099 [1] SWITCH (magnetic)  
    (Includes)
7. 4F-2294 [4] NUT  
  8F-0908 [4] WASHER  
  3L-6789 [4] LOCKWASHER  
8. 4B-2043 [4] NUT  
  3B-4501 [4] LOCKWASHER  
9. 2V-9473 [1] DIODE ASSEM.  
10. 0S-0509 [1] BOLT  
  5P-1075 [1] WASHER  
11. 7D-7233 [1] CLIP  
12. 2V-2380 [1] CIRCUIT BREAKER (60 amp)  
13. 4B-8626 [2] SCREW  
  4B-2047 [2] NUT  
  8F-1434 [2] LOCKWASHER  
14. 9D-8661 [1] RELAY  
15. 7N-1621 [1] CIRCUIT BREAKER (3 amp)  
16. 3K-8106 [4] SCREW  
17. 9B-7233 [4] LOCKWASHER  
  4B-4863 [4] WASHER  
18. 3R-8920 [1] CIRCUIT BREAKER (8 amp)  
19. 5V-8453 C [1] WIRE ASSEM.  
    (Includes)
  5P-5623 H WIRE .36 m(14.17 in.)  
  5P-4571 [1] TERMINAL  
20. 2L-8078 [1] TERMINAL  
  C   INDICATES CHANGE
 
#SEBP12160296
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 1 OF 3
SERIAL NO. 63X1639 TO 63X1691 INCLUSIVE
4V7042 HARNESS PARTS ARE SHOWN ON PAGE 74
c232097 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-8719 [1] PLATE  
2. 3V-8716 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 200 cm(78.44 in.)  
3. 3S-6050 [1] TERMINAL ASSEM. (-)  
4. 3S-6049 [1] TERMINAL ASSEM. (+)  
    (Each Includes)
5. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
6. 5R-3231 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 285 cm(112.21 in.)  
  3S-6049 [1] TERMINAL (+)  
    (Includes)
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
7. 1S-7251 [1] TERMINAL (to starter)  
8. 4D-7794 [4] CLIP  
9. 4V-7042 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
10. 7N-1062 [2] SWITCH ASSEM. (pressure)  
11. 3B-7764 [1] BUSHING  
12. 5H-8936 [1] ADAPTER  
13. 2V-5116 [1] SWITCH (temperature)  
14. 3K-0360 [1] SEAL  
15. 1D-4717 [2] NUT  
16. 4S-1962 [2] CLIP  
17. 4V-0664 [1] HARNESS ASSEM.  
    (Includes)
  5P-5623 H WIRE (16 gauge)  
  5P-5624 H WIRE (14 gauge)  
  5P-3160 [1] CONNECTOR  
18. 6N-9587 [1] CONNECTOR  
19. 5V-2954 [1] HARNESS ASSEM.  
    (Includes)
  5P-5623 H WIRE (16 gauge)  
20. 5P-1475 [2] TERMINAL  
21. 5P-1477 [2] TERMINAL  
22. 5P-1075 [2] WASHER  
23. 3K-4922 [1] CABLE ASSEM.  
    (Includes)
  [1] TERMINAL  
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
24. 2M-0913 TERMINAL (to disconnect)  
25. 5P-8440 [1] GROMMET  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 
#SEBP12160297
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 2 OF 3
SERIAL NO. 63X1639 TO 63X1691 INCLUSIVE. 7N718, 2V9095 SWITCH & 5V3833
HARNESS PARTS ARE SHOWN ON PAGES 71, 73A & 73B
c176372 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-2430 [8] BOLT  
  2K-4973 [8] LOCKNUT  
2. 4D-1936 [1] HOLDDOWN ASSEM.  
3. 5V-3833 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
4. 1D-4717 [8] NUT  
5. 5P-1075 [13] WASHER  
6. 3S-8624 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 H CABLE 27.94 cm(11 in.)  
  1S-7252 [1] TERMINAL (to disconnect)  
  1S-7251 [1] TERMINAL (to starter)  
7. 7N-0718 Y [1] SWITCH (disconnect)  
    (Separate Illustration)
8. 3V-8717 [1] PLATE  
9. 7M-9234 [1] WIRE ASSEM.  
    (Includes)
  5P-6641 H WIRE .203 m(8 in.)  
  7H-1182 [2] TERMINAL  
10. 2N-7744 [1] SWITCH ASSEM. (pressure)  
11. 3S-2093 [20] STRAP  
12. 4D-4785 [1] SWITCH ASSEM.  
13. 7N-4594 C [1] SWITCH ASSEM. (diff pressure)  
14. 4V-6977 [1] WIRE ASSEM.  
    (Includes)
  5P-5623 H WIRE 2.2 m(86.62 in.)  
15. 4V-6976 [1] TUBE  
16. 7K-4474 [1] TERMINAL (male)  
17. 8F-8513 [2] CLIP  
  4F-4879 [2] BOLT  
18. 4B-4278 [8] WASHER  
19. 2V-9095 Y [1] SWITCH ASSEM.  
    (Separate Illustration)
20. 0T-0102 [3] BOLT  
21. 1V-9373 [1] COVER  
22. 9H-8890 [1] GASKET  
23. 7K-6416 [1] GROMMET  
24. 5K-8451 [2] CLIP  
25. 0S-1594 C [4] BOLT  
  5M-2894 [4] WASHER  
26. 9M-5775 [2] MAT  
27. 4S-9219 [2] BATTERY  
    (Each Includes)
  7S-5041 [6] PLUG  
28. 1D-4719 [1] NUT  
  4B-4280 [1] WASHER  
29. 5B-0486 C [4] SPACER  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 
#SEBP12160298
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 3 OF 3
SERIAL NO. 63X1639 TO 63X1691 INCLUSIVE
c173890 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-8663 [1] RELAY ASSEM.  
2. 2A-0762 [8] BOLT  
  2D-6235 [8] LOCKNUT  
  1H-3338 [8] LOCKWASHER  
3. 4V-0449 [1] PLATE ASSEM.  
    (Includes)
4. 9F-2978 [2] NUT  
5. 7N-5933 [1] SWITCH (magnetic)  
6. 9F-3099 [1] SWITCH (magnetic)  
    (Includes)
7. 4F-2294 [4] NUT  
  8F-0908 [4] WASHER  
  3L-6789 [4] LOCKWASHER  
8. 4B-2043 [4] NUT  
  3B-4501 [4] LOCKWASHER  
9. 2V-9473 [1] DIODE ASSEM.  
10. 0S-1594 C [1] BOLT  
  5P-1075 [1] WASHER  
11. 7D-7233 [1] CLIP  
12. 2V-2380 [1] CIRCUIT BREAKER (60 amp)  
13. 4B-8626 [2] SCREW  
  4B-2047 [2] NUT  
  8F-1434 [2] LOCKWASHER  
14. 9D-8661 [1] RELAY  
15. 7N-1621 [1] CIRCUIT BREAKER (3 amp)  
16. 3K-8106 [4] SCREW  
17. 9B-7233 [4] LOCKWASHER  
  4B-4863 [4] WASHER  
18. 3R-8920 [1] CIRCUIT BREAKER (8 amp)  
  C   INDICATES CHANGE
 
#SEBP12160299
 

2V-2352: BATTERY & WIRING GP

2V2352 BATTERY AND WIRING GROUP-PART 1 OF 3
SERIAL NO. 63X1692 TO 63X2818 INCLUSIVE
4V7042 HARNESS PARTS ARE SHOWN ON PAGE 74
c232098 SEBP1216
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-8719 [1] PLATE  
2. 3V-8716 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 200 cm(78.44 in.)  
3. 3S-6050 [1] TERMINAL ASSEM. (-)  
4. 3S-6049 [1] TERMINAL ASSEM. (+)  
    (Each Includes)
5. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
6. 5R-3231 [1] CABLE ASSEM.  
    (Includes)
  5P-0747 CJ CABLE 285 cm(112.21 in.)  
  3S-6049 [1] TERMINAL (+)  
    (Includes)
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
7. 1S-7251 [1] TERMINAL (to starter)  
8. 4D-7794 [4] CLIP  
9. 4V-7042 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
10. 7N-1062 [2] SWITCH ASSEM. (pressure)  
11. 3B-7764 [1] BUSHING  
12. 5H-8936 [1] ADAPTER  
13. 2V-5116 [1] SWITCH (temperature)  
  3K-0360 [1] SEAL  
14. 5P-7086 CH TRIM .4 m (8 in.)  
15. 1D-4717 [2] NUT  
16. 4S-1962 [2] CLIP  
17. 4V-0664 [1] HARNESS ASSEM.  
    (Includes)
17. 5P-5623 H WIRE (16 gauge)  
  5P-5624 H WIRE (14 gauge)  
  5P-3160 [1] CONNECTOR  
18. 6N-9587 [1] CONNECTOR  
19. 5V-2954 [1] HARNESS ASSEM.  
    (Includes)
  5P-5623 H WIRE (16 gauge)  
20. 5P-1475 [2] TERMINAL  
21. 5P-1477 [2] TERMINAL  
22. 5P-1075 [2] WASHER  
23. 3K-4922 [1] CABLE ASSEM.  
    (Includes)
  [1] TERMINAL  
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
24. 2M-0913 TERMINAL (to disconnect)  
25. 5P-8440 [1] GROMMET  
  H   ORDER BY THE METER
  J   ORDER BY THE CENTIMETER
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION

Information:

Caterpillar Parts SIS Catalog 980C :

Truck sale:

 
On Request 
Caterpillar 980C, Construction
- Wheel Loaders
CARTER MACHINERY COMPANY, INC.
30,700 
Caterpillar 980C, Construction
- Wheel Loaders
N C MACHINERY CO.
32,500 
Caterpillar 980C, Construction
- Wheel Loaders
N C MACHINERY CO.
 
CATERPILLAR 980C 1987
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
 
CATERPILLAR 980C 1989
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.