AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G7387 METERING PUMP GROUP SERIAL NO. 63X1189-UP. PART OF 2V4283 STEERING CONTROL GROUP SHOWN ON PAGE 145B 980C


STEERING SYSTEM
PUMP GP-METERING
VALVE GP
BRAKING SYSTEM
VALVE GP
STEERING SYSTEM
LINES GP

WHEEL LOADER 980C WHEEL LOADER 63X
 980C WHEEL LOADER 63X00001-06574 (MACHINE) POWERED BY 3406 ENGINE SEBP1216 980C 63X   (1978)

STEERING SYSTEM

PUMP GP-METERING
PUMP AS-METERING
6J-5551 PUMP AS-METERING
PUMP GP-METERING
3G-7387 PUMP GP-METERING
 

#SEBP12160730
 

3G-7387: PUMP GP-METERING

3G7387 METERING PUMP GROUP
SERIAL NO. 63X1189-UP. PART OF 2V4283 STEERING CONTROL GROUP SHOWN ON
PAGE 145B
c654087 SEBP1216
3G7387 PUMP GP-METERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-5340 [1] SEAL-LIP (25.4MM ID)  
2. 3G-6906 [1] SCREW  
3. 1H-1023 [1] SEAL-O-RING (9.25MM ID)  
4. 3G-6907 [1] SEAT  
5. 5F-9144 [1] SEAL-O-RING (7.65MM ID)  
6. 6S-7827 [1] BALL  
7. 6S-7826 [1] RETAINER-BALL  
8. 3G-6905 [1] SPACER  
9. 7J-6833 [1] SEAL  
10. 9J-5686 [3] SEAL-O-RING (72.75MM ID)  
11. 7J-6835 [7] BOLT-12 POINT HEAD  
12. 3G-4461 [1] SPACER  
13. 3G-6889 [1] CAP  
14. 7J-6839 [1] DRIVE-CONTROL END  
15. 3G-6891 [2] RACE  
  5L-1100 [1] BEARING-THRUST  
16. 7F-8267 [1] SEAL-O-RING (47.2MM ID)  
17. 9J-5442 [1] RING  
18. 9J-8076 [1] BUSHING-TERMINAL  
19. 3G-6892 [1] BODY AS  
20. 7J-8010 [6] SPRING-CENTERING  
21. 7J-8009 [1] PIN  
   
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  118-4341 [1] KIT-SEAL  
  119-8116 [1] KIT-CONVERSION (BOLTS, SPACER AND CAP)  
 

#SEBP12160731
 

9J-5700: VALVE GP-STEERING

9J5700 STEERING VALVE GROUP-TYPE 1
9J5713 VALVE PARTS ARE SHOWN ON PAGE 150
c221721 SEBP1216
9J5700 VALVE GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-5713 Y [1] VALVE GROUP  
    (Separate Illustration)
2. 0S-1588 [8] BOLT  
  4B-4278 [8] WASHER  
3. 1P-4577 [4] FLANGE  
4. 9S-8001 C [4] PLUG  
  4J-7533 C [4] SEAL  
5. 3G-1183 [1] COVER  
6. 4J-5309 C [8] SEAL  
7. 0L-1329 [2] BOLT 7.62 cm(3 in.) long  
  9S-1366 [2] BOLT 6.35 cm(2.50 in.) long  
8. 3B-4508 [6] LOCKWASHER  
9. 4J-0523 [3] SEAL  
10. 9S-4187 [1] PLUG  
  3K-0360 [1] SEAL  
11. 3H-2549 [14] SHIM  
12. 2J-6089 [1] SPRING  
13. 9J-7795 [1] VALVE GROUP  
    (Includes)
  [1] SEAT  
14. 1J-8497 [1] VALVE  
15. 2J-6088 [1] SPRING (outer)  
  4J-7490 [1] SPRING (inner)  
16. 4J-0519 [1] SEAL  
17. 9S-4191 [1] PLUG  
18. 3J-1907 [2] SEAL  
19. 4B-9782 [1] BALL  
20. 9H-2367 [1] SPRING  
21. 9S-6154 [1] PLUG ASSEM.  
    (Includes)
22. 5H-3193 [1] PIN  
23. 8J-8466 [1] STOP  
  2M-9780 [1] SEAL  
24. 3H-5368 [4] BOLT  
  4B-4279 [4] WASHER  
25. 8J-8450 [1] COVER  
26. 0S-1587 [2] BOLT  
27. 1P-4578 [2] FLANGE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12160732
 

9J-5700: VALVE GP-STEERING

9J5700 STEERING VALVE GROUP-TYPE 2
9J5713-PAGE 150
c350872 SEBP1216
9J5700 VALVE GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-5713 Y [1] VALVE GP  
2. 3B-1915 C [8] BOLT  
  5M-2894 C [8] WASHER  
3. 1P-4577 [4] FLANGE-HALF  
4. 9S-8001 C [4] PLUG-O-RING  
  4J-7533 C [4] SEAL-O-RING  
5. 3G-1183 [1] COVER  
6. 4J-5309 C [8] SEAL-O-RING  
7. 0L-1329 [2] BOLT 7.62CM(3IN)LG  
  9S-1366 [2] BOLT 6.35CM(2.50IN)LG  
8. 1P-4578 [2] FLANGE  
9. 4J-0523 [3] SEAL-O-RING  
10. 9S-4187 [1] PLUG-O-RING  
  3K-0360 [1] SEAL-O-RING  
11. 3H-2549 [14] SHIM .254MM(.010IN)THK  
12. 2J-6089 [1] SPRING  
13. 9J-7795 [1] VALVE GP  
  [1] SEAT-PILOT  
14. 1J-8497 [1] VALVE  
15. 2J-6088 [1] SPRING (OUTER)  
  4J-7490 [1] SPRING (INNER)  
16. 4J-0519 [1] SEAL  
17. 9S-4191 [1] PLUG-O-RING  
18. 3J-1907 [2] SEAL  
19. 4B-9782 [1] BALL  
20. 9H-2367 [1] SPRING-VALVE  
21. 9S-6154 [1] PLUG AS-O-RING  
22. 5H-3193 [1] PIN-SPRING  
23. 8J-8466 [1] STOP  
  2M-9780 [1] SEAL-O-RING  
24. 3H-5368 C [4] BOLT  
  5P-8244 C [4] WASHER  
25. 8J-8450 [1] COVER  
26. 0S-1587 [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12160733
 

9J-5713: VALVE GP

9J5713 BASIC VALVE GROUP-TYPE 1
PART OF 9J5700 STEERING VALVE GROUP SHOWN ON PAGES 148B & 149
c217596 SEBP1216
9J5713 VALVE GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4776 [1] SHIM .13 mm(.005 in.) thick  
  4J-8224 [3] SHIM .26 mm(.010 in.) thick  
2. 8J-8471 [1] SPACER  
3. 9J-5714 [1] SPRING  
4. 2L-3793 [1] SCREW  
  3B-4506 [1] LOCKWASHER  
  1T-0689 [1] WASHER  
5. 8J-8473 [1] RETAINER  
6. 8J-8472 [1] RETAINER  
7. 4J-6806 B [3] SHIM (use as required)  
8. 9J-5475 [1] VALVE  
9. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL  
10. 9S-4185 [1] PLUG  
  3K-0360 [1] SEAL  
11. 8J-0507 [1] SEAT  
  3J-1907 [1] SEAL  
12. 4B-9782 [1] BALL  
13. 7J-8066 [1] SEAT  
  1J-9671 [1] SEAL  
  B   USE AS REQUIRED
 

#SEBP12160734
 

9J-5713: VALVE GP

9J5713 BASIC VALVE GROUP-TYPE 2
PART OF 9J5700 STEERING VALVE
c350878 SEBP1216
9J5713 VALVE GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4776 B [1] SHIM .13MM(.005IN)THK  
  4J-8224 B [3] SHIM .26MM(.010IN)THK  
2. 4T-2607 C [1] SPACER  
3. 9J-5714 [1] SPRING  
4. 2L-3793 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  1T-0689 [1] WASHER  
5. 8J-8473 [1] RETAINER  
6. 8J-8472 [1] RETAINER  
7. 4J-6806 B [3] SHIM (1.2MM THK)  
8. 9J-5475 [1] VALVE  
9. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
10. 9S-4185 [1] PLUG-O-RING  
  3K-0360 [1] SEAL-O-RING  
11. 4T-0318 [1] SEAT  
  3J-1907 [1] SEAL  
12. 4B-9782 [1] BALL  
13. 4T-0317 [1] SEAT  
  1J-9671 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12160735
 

2V-2615: LINES GP-STEERING

2V2615 STEERING OIL LINES GROUP-PART 1 OF 3
SERIAL NO. 63X1 TO 63X1018 INCLUSIVE
c238136 SEBP1216
2V2615 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6130 [2] PLUG  
2. 2S-4078 [2] SEAL  
3. 9S-4185 [1] PLUG  
4. 3K-0360 [1] SEAL  
5. 1P-4578 [4] FLANGE  
6. 0T-0320 [8] BOLT  
7. 5P-8244 [8] WASHER  
8. 4V-5132 [1] HOSE ASSEM.  
    (Includes)
  8S-9348 CH HOSE 22.04 in.(56 cm)  
9. 3S-8568 [1] STEM ASSEM. (22.5 DEGREES)  
10. 3S-7116 [2] SLEEVE  
11. 5S-3811 [1] STEM ASSEM. (90 DEGREES)  
12. 4J-0522 [2] SEAL  
13. 4K-6297 [3] ELBOW  
14. 3J-1907 [3] SEAL  
15. 3V-6806 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 18.11 in.(46 cm)  
16. 4S-5414 [2] SLEEVE  
17. 2P-0987 [1] COUPLING ASSEM. (straight)  
  2P-1458 [1] COUPLING ASSEM. (45 DEGREES)  
18. 3V-6805 C [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 16.33 in.(41.5 cm)  
19. 4S-5414 [2] SLEEVE  
20. 2P-1461 [1] COUPLING ASSEM. (90 DEGREES)  
21. 2P-1458 [1] COUPLING ASSEM. (45 DEGREES)  
22. 3V-6804 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 20.07 in.(51 cm)  
23. 2P-0987 [2] COUPLING ASSEM.  
24. 4S-5414 [2] SLEEVE  
25. 4F-5192 [4] BOLT  
  3B-4507 [4] LOCKWASHER  
26. 2V-2706 [1] TUBE ASSEM.  
    (Includes)
27. 8J-5914 [1] PLUG  
28. 2S-4078 [2] SEAL  
29. 4S-6797 [1] CONNECTOR  
30. 0L-1329 [4] BOLT  
31. 3B-4508 [12] LOCKWASHER  
32. 1P-3705 [4] SEAL  
33. 3V-6800 [1] ELBOW  
34. 9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
35. 9S-1366 [2] BOLT  
36. 7B-3235 [2] BOLT  
37. 4V-5097 [1] ELBOW  
38. 1D-4566 [4] BOLT  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP12160736
 

2V-2615: LINES GP-STEERING

2V2615 STEERING OIL LINES GROUP-PART 2 OF 3
SERIAL NO. 63X1 TO 63X1018 INCLUSIVE
c170729 SEBP1216
2V2615 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-6783 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 29.92 in. (76 cm)  
2. 2P-1458 [1] COUPLING ASSEM. (45 degrees)  
  2P-0987 [1] COUPLING ASSEM. (straight)  
3. 4S-5414 [2] SLEEVE  
4. 3V-6789 [1] TUBE ASSEM.  
5. 030-6816 [2] ELBOW  
6. 1J-9671 [3] SEAL  
7. 3V-6787 [1] TUBE ASSEM.  
8. 4K-6297 [3] ELBOW  
9. 3J-1907 [5] SEAL  
10. 2P-7214 [2] ELBOW  
11. 0L-1143 [6] BOLT  
12. 3B-4506 [6] LOCKWASHER  
13. 3V-6802 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 C HOSE 48.81 in. (124 cm)  
14. 8S-6417 [2] COUPLING ASSEM.  
15. 4S-5414 [2] SLEEVE  
16. 3V-6803 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 28.74 in. (73 cm)  
17. 8S-6417 [2] COUPLING ASSEM.  
18. 4S-5414 [2] SLEEVE  
19. 5P-7786 [2] BOLT  
  1D-5117 [2] NUT  
20. 1F-7958 [2] NUT  
  5P-1076 [2] WASHER  
21. 1V-9892 [1] BRACKET ASSEM.  
22. 3V-6782 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 34.64 in. (88 cm)  
23. 2P-1461 [1] COUPLING ASSEM. (90 degrees)  
  2P-0987 [1] COUPLING ASSEM. (straight)  
24. 4S-5414 [2] SLEEVE  
25. 8M-0505 [2] CONNECTOR  
26. 3K-0360 [4] SEAL  
27. 030-8188 [2] CONNECTOR  
28. 6K-0806 [2] STRAP  
29. 3V-6775 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 40.55 in. (103 cm)  
30. 4S-5414 [2] SLEEVE  
31. 2P-1461 [1] COUPLING ASSEM. (90 degrees)  
  2P-0987 [1] COUPLING ASSEM. (straight)  
32. 031-6281 [1] TEE  
  031-1864 [1] ELBOW  
33. 1J-9671 [1] SEAL  
34. 3V-6788 [1] TUBE ASSEM.  
35. 3V-6786 [1] TUBE ASSEM.  
36. 8F-4197 C [3] BOLT  
  4S-9191 [3] WASHER  
37. 2V-2559 [3] SPACER  
38. 2P-1281 [2] UNION  
39. 7F-2050 [4] NUT  
40. 2P-2204 [2] ELBOW  
41. 1D-4717 [2] NUT  
42. 5P-1075 [2] WASHER  
43. 2V-2558 [1] ANGLE  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP12160737
 

2V-2615: LINES GP-STEERING

2V2615 STEERING OIL LINES GROUP-PART 3 OF 3
SERIAL NO. 63X1 TO 63X1018 INCLUSIVE
c311347 SEBP1216
2V2615 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-6773 C [1] HOSE AS  
  9S-0247 HOSE 24.01IN.(61CM)  
2. 3S-7166 CY [2] SLEEVE  
3. 7S-1716 [1] STEM AS-COLLET (110)  
  3S-8363 G [1] STEM AS (90)  
4. 1P-4576 [16] FLANGE  
5. 4J-5267 [8] SEAL  
6. 0S-1588 [44] BOLT  
7. 5M-2894 [48] WASHER  
8. 3V-6836 C [1] BRACKET  
9. 9D-1829 [1] CLIP  
10. 3V-6774 [1] HOSE AS  
  9S-0247 HOSE 43.30IN.(110CM)  
  7S-1711 [1] STEM AS-COLLET (100)  
  3S-8362 [1] STEM AS-COLLET (67.5)  
11. 3S-7166 G [2] SLEEVE  
12. 2V-7481 [1] HOSE AS  
  9S-0247 HOSE 23.22IN.(59CM)  
13. 3S-7166 [2] SLEEVE  
14. 3S-7165 [1] STEM AS (STRAIGHT)  
15. 7S-1711 G [1] STEM AS-COLLET (100)  
16. 1V-9891 [1] HOSE AS  
  8S-9355 HOSE 18.89IN.(48CM)  
  3S-7252 [2] SLEEVE  
17. 3S-8503 [2] STEM AS-COLLET  
18. 1V-9890 G [1] HOSE AS  
  8S-9355 HOSE 24.80IN.(63CM)  
19. 3S-7252 [2] SLEEVE  
20. 6D-9961 [2] STEM AS  
21. 1P-4577 G [8] FLANGE-HALF  
22. 4J-0520 [4] SEAL  
23. 2V-2565 [1] BLOCK-MANIFOLD  
  0T-0573 [4] BOLT  
24. 3B-4506 [6] LOCKWASHER  
25. 5S-9263 [1] HOSE AS  
  8S-9355 HOSE 43.30IN.(110CM)  
26. 3S-8363 [1] STEM AS (90)  
  3S-8358 [1] STEM AS-COLLET (22.5)  
27. 3S-7166 G [2] SLEEVE  
28. 0L-1351 [1] BOLT  
29. 5P-1075 [1] WASHER-HARD  
30. 1C-2251 [2] BOLT  
31. 0L-2070 [4] BOLT  
32. 3V-0020 [1] ELBOW  
33. 1P-3703 [2] SEAL-RECTANGULAR  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP12160738
 

2V-2615: LINES GP-STEERING

2V2615 STEERING OIL LINES GROUP-PART 1 OF 3
SERIAL NO. 63X1019 TO 63X1157 INCLUSIVE
c238137 SEBP1216
2V2615 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6130 [2] PLUG  
2. 2S-4078 C [3] SEAL  
3. 9S-4185 [1] PLUG  
4. 3K-0360 [1] SEAL  
5. 1P-4578 [4] FLANGE  
6. 0T-0320 [8] BOLT  
7. 5P-8244 [8] WASHER  
8. 4V-5132 [1] HOSE ASSEM.  
    (Includes)
  8S-9348 CH HOSE 22.04 in.(56 cm)  
9. 3S-8568 [1] STEM ASSEM. (22.5 DEGREES)  
10. 3S-7116 [2] SLEEVE  
11. 5S-3811 [1] STEM ASSEM. (90 DEGREES)  
12. 4J-0522 [2] SEAL  
13. 4K-6297 C [2] ELBOW  
14. 3J-1907 [3] SEAL  
15. 5V-4687 C [1] HOSE ASSEM.  
    (Includes)
  2P-5943 H HOSE 20 in.(51 cm)  
16. 4S-5414 [2] SLEEVE  
17. 2P-0987 [1] COUPLING ASSEM. (straight)  
  2P-1461 [1] COUPLING ASSEM. (90 DEGREES)  
18. 3V-6805 C [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 16.33 in.(41.5 cm)  
19. 4S-5414 [2] SLEEVE  
20. 2P-1461 [1] COUPLING ASSEM. (90 DEGREES)  
21. 2P-1458 [1] COUPLING ASSEM. (45 DEGREES)  
22. 3V-6806 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 CH HOSE 18.11 in.(46 cm)  
23. 2P-0987 [1] COUPLING ASSEM. (straight)  
24. 4S-5414 [2] SLEEVE  
25. 2P-1458 [1] COUPLING ASSEM. (45 DEGREES)  
26. 2V-2706 [1] TUBE ASSEM.  
    (Includes)
27. 8J-5914 [1] PLUG  
28. 2S-4078 [2] SEAL  
29. 4S-6797 [1] CONNECTOR  
30. 0L-1329 [4] BOLT  
31. 3B-4508 [12] LOCKWASHER  
32. 1P-3705 [4] SEAL  
33. 3V-6800 [1] ELBOW  
34. 9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
35. 9S-1366 [2] BOLT  
36. 7B-3235 [2] BOLT  
37. 4V-5097 [1] ELBOW  
38. 1D-4566 [4] BOLT  
39. 8M-0506 C [1] CONNECTOR  
40. 4F-5192 [4] BOLT  
  3B-4507 [4] LOCKWASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP12160739
 

2V-2615: LINES GP-STEERING

2V2615 STEERING OIL LINES GROUP-PART 2 OF 3
SERIAL NO. 63X1019 TO 63X1157 INCLUSIVE
c172244 SEBP1216
2V2615 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-6783 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 H HOSE 29.92 in. (76 cm)  
2. 2P-1458 [1] COUPLING ASSEM. (45")  
  2P-0987 [1] COUPLING ASSEM. (straight)  
3. 4S-5414 [2] SLEEVE  
4. 3V-6789 [1] TUBE ASSEM.  
5. 030-6816 [2] ELBOW  
6. 1J-9671 [3] SEAL  
7. 3V-6787 [1] TUBE ASSEM.  
8. 4K-6297 [3] ELBOW  
9. 3J-1907 [5] SEAL  
10. 2P-7214 [2] ELBOW  
11. 0L-1143 [6] BOLT  
12. 3B-4506 [6] LOCKWASHER  
13. 3V-6802 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 H HOSE 48.81 in.(124 cm)  
14. 8S-6417 [2] COUPLING ASSEM.  
15. 4S-5414 [2] SLEEVE  
16. 3V-6803 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 H HOSE 28.74 in. (73 cm)  
17. 8S-6417 [2] COUPLING ASSEM.  
18. 4S-5414 [2] SLEEVE  
19. 5P-7786 [2] BOLT  
  1D-5117 [2] NUT  
20. 1F-7958 [2] NUT  
  5P-1076 [2] WASHER  
21. 1V-9892 [1] BRACKET ASSEM.  
22. 3V-6782 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 H HOSE 34.64 in. (88 cm)  
23. 2P-1461 [1] COUPLING ASSEM. (90 degrees)  
  2P-0987 [1] COUPLING ASSEM. (straight)  
24. 4S-5414 [2] SLEEVE  
25. 8M-0505 [2] CONNECTOR  
26. 3K-0360 [4] SEAL  
27. 030-8188 [2] CONNECTOR  
28. 6K-0806 [2] STRAP  
29. 3V-6775 [1] HOSE ASSEM.  
    (Includes)
  2P-5943 H HOSE 40.55 in. (103 cm)  
30. 4S-5414 [2] SLEEVE  
31. 2P-1461 [1] COUPLING ASSEM. (90 degrees)  
  2P-0987 [1] COUPLING ASSEM. (straight)  
32. 031-6281 [1] TEE  
  031-1864 [1] ELBOW  
33. 2V-2558 [1] ANGLE  
34. 3V-6788 [1] TUBE ASSEM.  
35. 3V-6786 [1] TUBE ASSEM.  
36. 8F-4197 [3] BOLT  
  4S-9191 [3] WASHER  
37. 2V-2559 [3] SPACER  
38. 2P-1281 [2] UNION  
39. 7F-2050 [4] NUT  
40. 2P-2204 [2] ELBOW  
41. 1D-4717 [2] NUT  
42. 5P-1075 [2] WASHER  
  H   ORDER BY THE INCH
 

Information:

Caterpillar Parts SIS Catalog 980C :

PUMP AS-METERING
6J-5551 PUMP AS-METERING
STEERING COLUMN GP-ADJUSTABLE
3V-0380 STEERING COLUMN GP-ADJUSTABLE
STEERING COLUMN GP-ADJUSTABLE
3V-0380 STEERING COLUMN GP-ADJUSTABLE
STEERING COLUMN GP-ADJUSTABLE
3V-0380 STEERING COLUMN GP-ADJUSTABLE
STEERING COLUMN GP-ADJUSTABLE
3V-0380 STEERING COLUMN GP-ADJUSTABLE
STEERING COLUMN GP-ADJUSTABLE
3V-0380 STEERING COLUMN GP-ADJUSTABLE
STEERING COLUMN GP-ADJUSTABLE
3V-0380 STEERING COLUMN GP-ADJUSTABLE
STEERING COLUMN GP-ADJUSTABLE
3V-0380 STEERING COLUMN GP-ADJUSTABLE
VALVE GP-STEERING
9J-5700 VALVE GP-STEERING
VALVE GP-STEERING
9J-5700 VALVE GP-STEERING
VALVE GP
9J-5713 VALVE GP
VALVE GP
9J-5713 VALVE GP
LINES GP-STEERING
2V-2615 LINES GP-STEERING
LINES GP-STEERING
2V-2615 LINES GP-STEERING
LINES GP-STEERING
2V-2615 LINES GP-STEERING
LINES GP-STEERING
2V-2615 LINES GP-STEERING

Truck sale:

Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT
 
29,900 
Caterpillar 980C, Wheel Loaders, Construction


 
40,336 
Caterpillar 980C, Wheel Loaders, Construction


Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MILTON CAT
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
18.500 
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.