AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

769C TRUCK 01X00001-02876 (MACHINE) POWERED BY 3408 ENGINE AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



TRUCK 769C TRUCK 01X
 769C TRUCK 01X00001-02876 (MACHINE) POWERED BY 3408 ENGINE SEBP1219 769C 01X   (1978)

Parts group 769C:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
AFTERCOOLER GP
4N-5833 AFTERCOOLER GP
4N5833 AFTERCOOLER GROUP. ENGINE SERIAL NO.48W4828-6983,7517,7518,7520,
7521,7524,7526,7528,7529,7533 & 48W7534 INCLUSIVE.
AFTERCOOLER GP
4N-5833 AFTERCOOLER GP
4N5833 AFTERCOOLER GROUP
ENGINE SERIAL NO. 48W6984 TO 7516, 7519, 7522, 7523, 7525, 7527,
7530 TO 7532 AND 48W7535 TO 48W13392 INCLUSIVE
AFTERCOOLER GP
4N-5833 AFTERCOOLER GP
4N5833 AFTERCOOLER GROUP
ENGINE SERIAL NO. 48W13393-UP
AIR CLEANER GP
AIR CLEANER GP
4N-7827 AIR CLEANER GP
4N7827 AIR CLEANER GROUP
SERIAL NO. 1X1 TO 1X1280 INCLUSIVE
AIR CLEANER GP
6N-0347 AIR CLEANER GP
6N0347 AIR CLEANER GROUP
SERIAL NO. 1X1 TO 1X1280 INCLUSIVE
PART OF 4N7827 AIR CLEANER
AIR CLEANER GP
8N-9198 AIR CLEANER GP
8N9198 AIR CLEANER GROUP
SERIAL NO. 1X1281-UP
NOTE: 4W7263 PRECLEANER ASSEMBLY IS AVAILABLE
4W-7966 CONVERSION GP-PRECLEANER
4W7966 CONVERSION GP-PRECLEANER-FIELD INSTALLATION
S/N 1X1-1X1280
FOR TRUCKS WITHOUT 2S4805 RAIN CAP AS & FOR 772 & 773 WITHOUT
6G8750 COLD WEATHER STARTING AS. AN ATTACHMENT
EXHAUST GP
PIPE GP-EXHAUST
9D-8995 PIPE GP-EXHAUST
9D8995 EXHAUST PIPING GROUP
PIPE GP-EXHAUST
2G-9490 PIPE GP-EXHAUST
2G9490 EXHAUST PIPING GROUP
PART OF 2G9560 ENGINE EXHAUST AR LISTED ON PAGE 57
AN ATTACHMENT
2G-9560 EXHAUST AR-ENGINE
2G9560 ENGINE EXHAUST ARRANGEMENT-DIVERTER VALVE. AN ATTACHMENT
LINES GP-AIR
AIR LINES GROUP
4N-7744 AIR LINES GROUP
4N7744 AIR LINES GROUP
ENGINE SERIAL NO. 48W4828 TO 48W10372 INCLUSIVE
LINES GP-AIR
1N-4732 LINES GP-AIR
1N4732 AIR LINES GROUP
ENGINE SERIAL NO. 48W10373 TO 48W11577 INCLUSIVE
LINES GP-AIR
1N-4732 LINES GP-AIR
1N4732 AIR LINES GROUP
ENGINE SERIAL NO. 48W11578-UP
LINES GP-AIR
9D-9050 LINES GP-AIR
9D9050 AIR LINES GROUP-INTAKE
SERIAL NO. 1X1 TO 1X1329 INCLUSIVE
LINES GP-AIR
9D-9050 LINES GP-AIR
9D9050 AIR LINES GROUP-INTAKE
SERIAL NO. 1X1330-UP
MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
4N-2154 MANIFOLD GP-EXHAUST
4N2154 EXHAUST MANIFOLD GROUP. ENGINE SERIAL NO. 48W4828-10372 INCLUSIVE
NOTE: FOR FIELD REPLACEMENT OF 4N1676 MANIFOLD, ORDER 7N5218 & 7N5219
MANIFOLD
MANIFOLD GP-EXHAUST
8N-0080 MANIFOLD GP-EXHAUST
8N80 EXHAUST MANIFOLD GROUP
ENGINE SERIAL NO. 48W10373-UP
MUFFLER GP
MUFFLER GP
7N-6020 MUFFLER GP
7N6020 MUFFLER GROUP-TYPE 1. PART OF 2G9560 ENGINE EXHAUST ARRANGEMENT
LISTED ON PAGE 57. AN ATTACHMENT
MUFFLER GP
7N-6020 MUFFLER GP
7N6020 MUFFLER GROUP-TYPE 2. PART OF 2G9560 ENGINE EXHAUST ARRANGEMENT
LISTED ON PAGE 57. AN ATTACHMENT
TURBOCHARGER GP
TURBOCHARGER GP
1W-0412 TURBOCHARGER GP
1W412 TURBOCHARGER GROUP. ENGINE SERIAL NO.48W12524-12527,12529-12531
48W12533-UP. 1W3897 TURBOCHARGER PARTS ARE SHOWN ON PAGE 60A
TURBOCHARGER GP
4N-2076 TURBOCHARGER GP
4N2076 TURBOCHARGER GROUP. ENGINE SERIAL NO.48W4828-12523,12528 & 12532
INCLUSIVE. 4N8882 TURBOCHARGER PARTS ARE SHOWN ON PAGE 60
TURBOCHARGER GROUP
4N-8882 TURBOCHARGER GROUP
4N8882 TURBOCHARGER GROUP
ENGINE SERIAL NO. 48W4828-12523, 12528
PART OF 4N2076 TURBOCHARGER GROUP SHOWN ON PAGE 59
TURBOCHARGER GP
1W-3897 TURBOCHARGER GP
1W3897 TURBOCHARGER GROUP. ENGINE SERIAL NO.48W12524-12527,12529-12531 &
48W12533-UP. PART OF 1W412 TURBOCHARGER GROUP SHOWN ON PAGE 59
LINES GP-TURBOCHARGER OIL
4N-7180 LINES GP-TURBOCHARGER OIL
4N7180 TURBOCHARGER OIL LINES GROUP

Information:

(For parts list, see above)

Specifications
Aftercooler
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Aftercooler
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Aftercooler
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Aftercooler
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Aftercooler - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Aftercooler - Install
3408E and 3412E Engines for Caterpillar Built Machines
Aftercooler - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Aftercooler - Install
3408E and 3412E Engines for Caterpillar Built Machines
Aftercooler - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Aftercooler - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Adapters And O-Ring Seals Used In Aftercooler Group{1063}
1982/03/08
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Special Instruction
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Dust Ejector Group
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Air Cleaner Group
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Air Cleaners
3408 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Fresh Air Filter
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Service Magazine
Precleaners Available For Parts Service{1050,1055}
1984/10/08
New Air Cleaner Group Keeps Rain Out Of Cleaner{1051,1054}
1979/11/12
Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Disassembly and Assembly
Exhaust Piping
769C TRUCK VEHICLE SYSTEMS
Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Exhaust Manifold Group And Air Lines Group Used To Prevent Exhaust Leakage{1059,1061}
1980/11/17
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Exhaust Tubes And Support Used{1061,1067}
1982/05/10
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Improvements To Exhaust Piping{1061}
1983/01/10
Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09
New Locks Used In Exhaust Piping Group Have Improved Service Life{1061}
1985/03/25
New Lever Available For Exhaust Piping Group{1061}
1985/04/29
Attachment Engine Exhaust Arrangements Changed To Provide Continuous Muffler Use{1062,1061}
1987/02/16
New Piston And Seal Improve Exhaust Piping{1061}
1987/04/13
Shorter Bolts Used In Exhaust Piping Groups To Retain Seal Ring Within Piston{1061}
1987/11/09
New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/04/30
Procedure To Adjust The Exhaust Piping Group (Exhaust Diverter Box) {1061}
1994/03/14
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction, REHS0061, "Retrofit Procedure For Air Operated Exhaust Diverter" Is Available {0374,1062}
1997/06/09
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Service Magazine
Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
New Seal Used In Air Lines Group {1058}
1994/03/21
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Air Lines
3408 VEHICULAR ENGINE
Intake Air Lines Group
3408 VEHICULAR ENGINE
Service Magazine
New Exhaust Manifold Group And Air Lines Group Used To Prevent Exhaust Leakage{1059,1061}
1980/11/17
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/04/30
New Tube Assemblies Used In Air Lines Groups{1058}
1992/03/02
New Tube Assembly With Bellows At Each End Used In Engine Air Lines Groups {1058}
1994/01/17
New Seal Used In Air Lines Group {1058}
1994/03/21
Service Letter-NACD
Product Support Program For Installing New Exhaust Manifolds On Certain 768C and 772B Tractors; And 769C And 773B Trucks
Product Support Program For Installing New Exhaust Manifolds On Certain 768C and 772B Tractors; And 769C And 773B Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Exhaust Manifolds
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Manifolds
3408 VEHICULAR ENGINE
Exhaust Manifold
3408E and 3412E Engines for Caterpillar Built Machines
Exhaust Manifold
3408E and 3412E Engines for Caterpillar Built Machines
Exhaust Manifold
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
Product Support Program For Installing New Exhaust Manifolds On Certain 768C and 772B Tractors; And 769C And 773B Trucks
Product Support Program For Installing New Exhaust Manifolds On Certain 768C and 772B Tractors; And 769C And 773B Trucks
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Exhaust Temperature - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Exhaust Manifolds
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Exhaust Crossover Manifold
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Exhaust Manifolds
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Exhaust Crossover Manifold
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Exhaust Manifold Group And Air Lines Group Used To Prevent Exhaust Leakage{1059,1061}
1980/11/17
Two New Exhaust Manifolds Available For Replacement Of Single Rear Manifold To Prevent Broken Studs{1059}
1981/03/02
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Exhaust Tubes And Support Used{1061,1067}
1982/05/10
Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09
Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08
New Piston And Seal Improve Exhaust Piping{1061}
1987/04/13
New Exhaust Manifold Sections And Gaskets Used In Exhaust Manifold Groups{1059}
1988/03/28
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
New Exhaust Manifold Stud Available{1059}
1990/02/12
Update Information For Exhaust Manifolds{1059}
1990/12/24
New One-Piece Exhaust Manifold Used{1059,7553,7555}
1991/01/28
New Exhaust Manifolds, Longer Mounting Studs And Spacers Used In Exhaust Manifold Groups {1059}
1994/08/29
New Thicker Exhaust Manifold Gasket Used{1059}
1995/08/28
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
A New Exhaust Gasket Is Now Available {1059}
2006/03/20
Testing and Adjusting
Inlet Manifold Pressure - Test
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Tube Assembly With Bellows At Each End Used In Engine Air Lines Groups {1058}
1994/01/17
New Seal Used In Air Lines Group {1058}
1994/03/21
Disassembly and Assembly
Fresh Air Filter
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Air Conditioning Compressor
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Exhaust Piping
769C TRUCK VEHICLE SYSTEMS
Service Magazine
New Exhaust Manifold Group And Air Lines Group Used To Prevent Exhaust Leakage{1059,1061}
1980/11/17
Two New Exhaust Manifolds Available For Replacement Of Single Rear Manifold To Prevent Broken Studs{1059}
1981/03/02
New Adapters And O-Ring Seals Used In Aftercooler Group{1063}
1982/03/08
New Exhaust Tubes And Support Used{1061,1067}
1982/05/10
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improvements To Exhaust Piping{1061}
1983/01/10
Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09
New Locks Used In Exhaust Piping Group Have Improved Service Life{1061}
1985/03/25
Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08
New Lever Available For Exhaust Piping Group{1061}
1985/04/29
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Piston And Seal Improve Exhaust Piping{1061}
1987/04/13
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Shorter Bolts Used In Exhaust Piping Groups To Retain Seal Ring Within Piston{1061}
1987/11/09
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
New Exhaust Manifold Stud Available{1059}
1990/02/12
Update Information For Exhaust Manifolds{1059}
1990/12/24
Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Retrofit Procedure For Air Operated Exhaust Diverter{1062}
Retrofit Procedure For Air Operated Exhaust Diverter{1062}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Specifications
Muffler Group
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Exhaust Tubes And Support Used{1061,1067}
1982/05/10
Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09
Attachment Engine Exhaust Arrangements Changed To Provide Continuous Muffler Use{1062,1061}
1987/02/16
New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/04/30
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction, REHS0061, "Retrofit Procedure For Air Operated Exhaust Diverter" Is Available {0374,1062}
1997/06/09
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Inlet Air And Exhaust Lines
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger 4MF
3408 VEHICULAR ENGINE
Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Turbocharger (4MF)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Air Conditioning Compressor
769, 773B, & 777 TRUCKS OPERATOR'S STATION
Turbocharger (4MF)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Turbocharger - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Exhaust Manifold Group And Air Lines Group Used To Prevent Exhaust Leakage{1059,1061}
1980/11/17
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/04/30
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Seal Used In Air Lines Group {1058}
1994/03/21
Adapter Added To The Oil Cooler Lines Group{1365,1380}
1995/12/11
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/06/27
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
New Seal Used In Air Lines Group {1058}
1994/03/21
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Tool Operating Manual
Compact DPF Cleaner{0599, 0701, 0702, 108F}
Compact DPF Cleaner{0599, 0701, 0702, 108F}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
Service Magazine
Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
2012/09/11
New Tier 1, 2, and 3 Reman Emissions Repower Solutions Are Available for Certain Machines {775E}
2013/04/15
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14

Truck sale:

Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
MACALLISTER MACHINERY CO., INC
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
68.091 
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.