7N4574 FUEL INJECTION HOUSING ASSEMBLY-TYPE 2 PART OF 9N3326 & 7N6389 PUMP SHOWN ON PAGES 70,71A & 71C 769C

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 7N-4574 HOUSING AS
1. 7N-4574 HOUSING AS

CONTROL GP-FUEL RATIO

2. 7N-9396 FUEL RATIO

GOVERNOR GP

3. 6N-1947 PISTON GP-

CONTROL GP-FUEL RATIO

4. 7N-9396 FUEL RATIO
5. 9N-6359 CONTROL GP
6. 6N-6209 CONTROL GP

GOVERNOR GP

7. 6N-1947 PISTON GP-

CONTROL GP-FUEL RATIO

8. 6N-6209 CONTROL GP

GOVERNOR GP

9. 6N-5314 PISTON GP-
0. INFORMATION

TRUCK 769C TRUCK 01X
769C TRUCK 01X00001-02876 (MACHINE) POWERED BY 3408 ENGINE SEBP1219 769C 01X (1978)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

6N-1043 PUMP GP-FUEL INJECTION

7N-4574 HOUSING AS-PUMP

#SEBP12190180

7N-4574: HOUSING AS-PUMP

HOUSING AS-PUMP

7N4574 FUEL INJECTION HOUSING ASSEMBLY-TYPE 2
PART OF 9N3326 & 7N6389 PUMP SHOWN ON PAGES 70,71A & 71C

c234712 SEBP1219

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7266	[1]	SHAFT
2.	7N-0242	[2]	BEARING
3.	5B-9318	[1]	BALL
4.	4N-0775	[2]	DOWEL
5.	8L-6565	[1]	PIN
6.	9S-4160	[2]	BEARING
7.	4M-1474	[4]	PIN
8.	9L-9766	[2]	PIN
9.	6N-8441	[2]	BEARING
10.	4N-0899	[1]	DOWEL
11.	1P-0232	[8]	BALL
	1P-0234	[8]	DOWEL

#SEBP12190181

7N-4574: HOUSING AS-PUMP

HOUSING AS-PUMP

7N4574 FUEL INJECTION HOUSING AS-TYPE 3
PART OF 9N3326 & 7N6389 PUMPS

c301909 SEBP1219

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7266	[1]	SHAFT-PUMP IDLER
2.	7N-0242	[2]	BEARING-SLEEVE
3.	5B-9318	[1]	BALL
4.	4N-0775	[2]	DOWEL-HOLLOW
5.	8L-6565	[1]	PIN-SPRING
6.	9S-4160	[2]	BEARING-SLEEVE
7.	4M-1474	[4]	PIN-LIFTER GUIDE
8.	9L-9766	[2]	PIN-PLUNGER LIFT
9.	6N-8441	[2]	BEARING-SLEEVE
10.	4N-0899	[1]	DOWEL-HOLLOW
11.	1P-0232	[8]	BALL
	1P-0234	[8]	DOWEL
12.	4N-0952 C	[1]	PLUG-CUP
	C		CHANGE FROM PREVIOUS TYPE

#SEBP12190182

7N-9396: FUEL RATIO CONTROL GROUP

FUEL RATIO CONTROL GROUP

7N9396 FUEL RATIO CONTROL GROUP-TYPE 1
ENGINE SERIAL NO. 48W4828 TO 12523, 12528 & 48W12532 INCLUSIVE
7N5486-PAGE 76

c219365 SEBP1219

7N9396 FUEL RATIO CONTROL GROUP Parts scheme

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2H-5547	[1]	BUSHING
2.	9L-5125	[2]	ELBOW
3.	9N-3040	[1]	HOSE ASSEM. 44.4 cm(17.48 in.)
4.	4N-8112	[2]	BOLT
	9M-1974	[2]	WASHER
5.	2P-8643	[1]	GASKET
6.	7N-5486 RY	[1]	CONTROL GROUP
			(Separate Illustration)
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP12190183

6N-1947: PISTON GP-GOVERNOR SERVO

PISTON GP-GOVERNOR SERVO

6N1947 GOVERNOR SERVO PISTON GROUP-TYPE 1
ENGINE SERIAL NO. 48W4828 TO 12523, 12528 & 48W12532 INCLUSIVE
PART OF 9N3684 GOVERNOR ADAPTER PLATE

c157457 SEBP1219

6N1947 PISTON GP-GOVERNOR SERVO Parts scheme

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-1807	[1]	CYLINDER
2.	8M-8997	[1]	SEAL
3.	4N-0820	[1]	SLEEVE
4.	7S-8447	[1]	PISTON ASSEM.

#SEBP12190184

7N-9396: FUEL RATIO CONTROL GROUP

FUEL RATIO CONTROL GROUP

7N9396 FUEL RATIO CONTROL GROUP-TYPE 2
ENGINE SERIAL NO. 48W4828 TO 48W12523, 12528 AND 48W12532 INCLUSIVE
9N6359-PAGE 75.02

c179510 SEBP1219

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2H-5547	[1]	BUSHING
2.	9L-5125 C	[1]	ELBOW
3.	9N-3040	[1]	HOSE ASSEM. 44.4 cm(17.48 in.)
4.	4N-8112	[2]	BOLT
	9M-1974	[2]	WASHER
5.	2P-8643	[1]	GASKET
6.	9N-6359 RCY	[1]	CONTROL GROUP
			(Separate Illustration)
7.	2N-1287 C	[1]	ELBOW
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION
	C		INDICATES CHANGE

#SEBP12190185

9N-6359: CONTROL GP-FUEL RATIO

CONTROL GP-FUEL RATIO

9N6359 FUEL RATIO CONTROL GROUP*R
ENGINE SERIAL NO. 48W4828 TO 12523, 12528, & 48W12532 INCLUSIVE
PART OF 7N9396 FUEL RATIO CONTROL

c228016 SEBP1219

9N6359 CONTROL GP-FUEL RATIO Parts scheme

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-8939	[1]	VALVE
2.	0S-1347	[1]	BOLT (drilled head)
	0S-1615	[2]	BOLT
	9S-5282	[3]	WASHER
3.	4J-2506	[1]	SEAL
4.	6L-5766	[1]	GASKET
5.	2P-8226	[1]	COVER
6.	2P-8804	[1]	DIAPHRAGM
7.	2P-8875	[1]	RETAINER ASSEM.
8.	6N-0515	[1]	SPRING (inner)
9.	3P-1979	[1]	SEAL
10.	2P-8225	[1]	HOUSING
11.	6N-0593	[1]	VALVE ASSEM.
12.	2P-8234	[1]	SEAL
13.	2P-8801	[1]	RETAINER
14.	9N-2797	[1]	SPRING (outer)
15.	2P-8803	[1]	WASHER
16.	4B-3388	[2]	BOLT
	8F-7242	[2]	WASHER
17.	9N-2141	[1]	SPRING
18.	6N-7148	[1]	COVER
19.	7N-5715	[1]	PIN

#SEBP12190186

6N-6209: CONTROL GP-FUEL RATIO

CONTROL GP-FUEL RATIO

6N6209 FUEL RATIO CONTROL GROUP
ENGINE S/N 48W12524-12527, 12529-12531, 12533-16067
6N0651-PAGE 76A

c231301 SEBP1219

6N6209 CONTROL GP-FUEL RATIO Parts scheme

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-3169 C	[1]	HOSE AS 60.96CM(24 IN)
2.	2N-1287 C	[1]	ELBOW-FLARED
3.	4N-8112	[2]	BOLT
	8F-7242 C	[2]	WASHER
	3B-4505 C	[2]	LOCKWASHER
4.	2P-8643	[1]	GASKET
5.	6N-0651 RY	[1]	CONTROL GP-FUEL RATIO
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP12190187

6N-1947: PISTON GP-GOVERNOR SERVO

PISTON GP-GOVERNOR SERVO

6N1947 GOVERNOR SERVO PISTON GROUP-TYPE 2
ENGINE SERIAL NO. 48W4828 TO 12523, 12528 & 48W12532 INCLUSIVE
PART OF 9N3684 GOVERNOR ADAPTER PLATE

c230564 SEBP1219

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-1807	[1]	CYLINDER-SERVO
2.	5P-9757 C	[1]	SEAL-O-RING
3.	8N-6983 C	[1]	SLEEVE
4.	8N-6979 C	[1]	PISTON & VALVE AS
	C		CHANGE FROM PREVIOUS TYPE

#SEBP12190188

6N-6209: CONTROL GP-FUEL RATIO

CONTROL GP-FUEL RATIO

6N6209 FUEL RATIO CONTROL GROUP
ENGINE SERIAL NO. 48W16068-UP
2W3157-PAGE 76B

c570187 SEBP1219

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-3169 IJ	[1]	HOSE AS 60.96CM(24IN.)
2.	2N-1287	[1]	ELBOW-FLARED
3.	4N-8112	[2]	BOLT
	8F-7242	[2]	WASHER
	3B-4505	[2]	LOCKWASHER
4.	2P-8643	[1]	GASKET
5.	2W-3157 CYR	[1]	CONTROL GP-FUEL RATIO


			J-INSTALLATION POSITION
			MAY VARY, TYPICAL
			POSITION SHOWN
	C		CHANGE FROM PREVIOUS TYPE
	I		SEE HOSE FABRICATION GUIDE
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP12190189

6N-5314: PISTON GP-GOVERNOR SERVO

PISTON GP-GOVERNOR SERVO

6N5314 GOVERNOR SERVO PISTON GROUP
ENGINE SERIAL NO. 48W12524 TO 12527, 12529 TO 12531 & 48W12533-UP
PART OF 1W4189 GOVERNOR ADAPTER PLATE

c510121 SEBP1219

6N5314 PISTON GP-GOVERNOR SERVO Parts scheme

For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-1807	[1]	CYLINDER-SERVO
2.	5P-9757 C	[1]	SEAL-O-RING
3.	8N-6983	[1]	SLEEVE
4.	8N-6978	[1]	PISTON & VALVE AS
	C		CHANGE FROM PREVIOUS TYPE

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Special Instruction

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}

Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}

Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

7000 Series Nozzles{0782}
7000 Series Nozzles{0782}

Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Service Letter-NACD

1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions
1590835, 1388754, 1313098, 1590838, 1388755, 1313099, 0r9420, And 0r8624 Injectors Need To Be Inspected For Special Instructions

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles

Specifications

Fuel Injection
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Injection Nozzle And Adapter
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Valve Mechanism Covers
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Valve Rocker Arms, Lifters And Bridges
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Injection
3408 VEHICULAR ENGINE

Fuel Injection Pump Housing
3408 VEHICULAR ENGINE

Automatic Timing Advance Unit
3408 VEHICULAR ENGINE

Injection Actuation Pressure Control Valve
3408E and 3412E Engines for Caterpillar Built Machines

Unit Injector Wiring
3408E and 3412E Engines for Caterpillar Built Machines

Unit Injector Hydraulic Pump
3408E and 3412E Engines for Caterpillar Built Machines

Unit Injector
3408E and 3412E Engines for Caterpillar Built Machines

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Service Letter-APD

Testing and Adjusting

Fuel Injector Oil Leakage - Check
3408E and 3412E Engines for Caterpillar Built Machines

Disassembly and Assembly

Fuel Injection Nozzles & Adapters
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Injection Pumps
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Injection Pump Housing & Governor
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Injection Pump Housing
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Fuel Injection Nozzles (Direct Injection)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK

Fuel Transfer Pump
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK

Automatic Timing Advance
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK

Fuel Injection Pump Housing And Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK

Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK

Governor Shutoff Solenoid
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK

Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK

Fuel Injection Valves (Precombustion)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Fuel Injection Nozzles (Direct Injection - Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Fuel Injection Nozzles And Adapters (Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Fuel Transfer Pump
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Fuel Injection Pumps
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Automatic Timing Advance
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Fuel Injection Pump Housing
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK

Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Unit Injector - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Unit Injector - Install
3408E and 3412E Engines for Caterpillar Built Machines

Service Magazine

Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25

Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31

Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15

Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29

Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09

New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15

New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03

Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11

Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

New Fuel Nozzle Adapters Used{1106}
1983/05/09

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06

New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27

New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25

New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01

New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01

Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02

Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17

Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14

New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11

New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16

Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28

Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06

Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13

A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25

Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04

Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18

Ether Starting Aid Groups Are Now Available{1456}
1979/01/22

New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12

Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19

Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11

Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17

New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15

Publications Available For Off Highway Truck Retrofits{1290,1631,1900,3100,3150}
1994/02/14

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12

Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25

New Design of the Injector Provides Improved Durability {1290, 1714}
2006/03/20

Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09

Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17

Caterpillar Parts SIS Catalog 769C :

7N-4574 HOUSING AS-PUMP

1W-4189 PLATE GP-GOVERNOR ADAPTER

9N-3684 PLATE GP-GOVERNOR ADAPTER

6N-1043 PUMP GP-FUEL INJECTION

6N-7829 PUMP GP-FUEL INJECTION

7N-6389 PUMP GP-FUEL INJECTION

7N-4574 HOUSING AS-PUMP

7N-9396 FUEL RATIO CONTROL GROUP

6N-1947 PISTON GP-GOVERNOR SERVO

7N-9396 FUEL RATIO CONTROL GROUP

9N-6359 CONTROL GP-FUEL RATIO

6N-6209 CONTROL GP-FUEL RATIO

6N-1947 PISTON GP-GOVERNOR SERVO

6N-6209 CONTROL GP-FUEL RATIO

Truck sale:

Caterpillar 769C
- Off Highway Trucks
MACALLISTER MACHINERY CO., INC

Caterpillar 769C
- Off Highway Trucks
HOLT CAT

68.091

Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada