AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N3761 CYLINDER BLOCK GP ENGINE S/N 79V10270-UP 4W6143 SLEEVE IS AVAILABLE ALSO PART OF 9N3763 CYLINDER BLOCK & 9N5669 SHORT BLOCK 225


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
CAMSHAFT GP
CRANKSHAFT GP

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1226 225 51U   (1972)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3551 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3551 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
9N-3763 SERVICE GP-CYLINDER BLOCK
9N-2139 BLOCK GP-SHORT
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
9N-5669 CYLINDER BLOCK GP
9N-5190 BLOCK GP-SHORT
 

#SEBP12260010
 

9N-3761: CYLINDER BLOCK GP

9N3761 CYLINDER BLOCK GP
ENGINE S/N 79V10270-UP
4W6143 SLEEVE IS AVAILABLE
ALSO PART OF 9N3763 CYLINDER BLOCK & 9N5669 SHORT BLOCK
c459338 SEBP1226
9N3761 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-7831 [10] BOLT  
2. 9L-9009 [10] WASHER  
3. 9N-3759 [5] CAP-CRANKSHAFT BEARING  
4. 9N-5246 [5] BEARING-CAMSHAFT  
5. 9L-8002 [8] DOWEL-HOLLOW  
6. 3B-0623 C [1] PLUG-CUP  
7. 4D-1322 [1] RING-RETAINING  
8. 3H-5552 [6] PLUG-CUP  
9. 2B-0858 [1] PLUG-PIPE  
10. 9N-6275 A SLEEVE-CYLINDER  
   
    FOR SALVAGE OF DAMAGED
    CYLINDER BORES IN
    BLOCK, QUANTITY TO BE
    DETERMINED BY USER
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12260011
 

9N-3763: SERVICE GP-CYLINDER BLOCK

9N3763 CYLINDER BLOCK SERVICE GP-FIELD INSTALLATION
SEBP12260011 SEBP1226
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9N-3761 Y [1] CYLINDER BLOCK GROUP  
   
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
   
  9N-5291 [1] BEARING--FRONT MAIN  
   
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260012
 

9N-2139: BLOCK GP-SHORT

9N2139 SHORT BLOCK GP
FIELD INSTALLATION-REPLACED BY 9N5190-PAGE 7.01
ENGINE S/N 79V4927-79V8492
SEBP12260012 SEBP1226
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
   
  9N-2613 Y [8] CONNECTING ROD & PISTON GROUP  
   
  9N-2017 Y [1] CRANKSHAFT GROUP  
   
  9N-3551 Y [1] CYLINDER BLOCK GROUP  
   
  9L-7816 [2] BOLT--FLYWHEEL--11.13MM (.438") X  
    42.9MM (1.69")
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260013
 

9L-6065: COVER GP-CYLINDER BLOCK

9L6065 COVER GP-CYLINDER BLOCK
ALSO PART OF 9N3763, 9N5669, 9N5190 AND 9N2139 SHORT BLOCKS
c456469 SEBP1226
9L6065 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-1866 [1] PLUG-CUP  
2. 9N-0575 [1] DOWEL  
 

#SEBP12260014
 

9N-5669: CYLINDER BLOCK GP

9N5669 SHORT BLOCK GP-FIELD INSTALLATION*R
ENGINE S/N 79V8493-UP
SEBP12260014 SEBP1226
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
   
  9N-3761 Y [1] CYLINDER BLOCK GROUP  
   
  9N-6222 Y [1] CRANKSHAFT GROUP  
   
  1W-2200 Y [8] CONNECTING ROD AND PISTON GROUP  
   
  9L-7816 [2] FLYWHEEL BOLT--.438 IN. X 1.69 IN.  
   
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260015
 

9N-5190: BLOCK GP-SHORT

9N5190 SHORT BLOCK GP-FIELD INSTALLATION*R
ENGINE S/N 79V4927-79V8492
SEBP12260015 SEBP1226
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9N-3761 Y [1] CYLINDER BLOCK GROUP  
   
  9N-2017 Y [1] CRANKSHAFT GROUP  
   
    - OR -
   
  9N-6222 Y [1] CRANKSHAFT GROUP  
   
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
   
  9N-3538 Y [8] CONNECTING ROD AND PISTON GROUP  
   
   
  9L-7816 [2] FLYWHEEL BOLT--.438 IN. X 1.69 IN.  
   
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260016
 

9N-0542: SEAL GP-CRANKSHAFT

9N0542 SEAL GP-CRANKSHAFT
c467504 SEBP1226
9N0542 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6660 [1] SEAL GP-CRANKSHAFT  
2. 7W-3200 C [1] SEAL GP-CRANKSHAFT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12260017
 

9N-0728: CAMSHAFT GP-SINGLE

9N0728 CAMSHAFT GP-SINGLE
c464589 SEBP1226
9N0728 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3354 R [1] KIT-CAMSHAFT  
  8T-2998 AF [1] LUBRICANT-CAM  
  9N-5786 AF [16] LIFTER-VALVE  
2. 5P-4283 [1] DOWEL  
3. 1N-4660 C [1] GEAR AS-CAMSHAFT DRIVE  
    (102 TEETH)
4. 9L-7028 [2] DOWEL  
5. 9N-6218 C [1] PIN-THRUST  
6. 4F-9325 C [1] GASKET  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12260018
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP12260018 SEBP1226
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    CYLINDER BLOCK NOT REBORED
    CRANKSHAFT GROUND FOR UNDERSIZE
    BEARING I.D. OF:
    FRONT MAIN NON-GROOVED
  9N-3055 [1] .25MM  
  9N-3054 [1] .51MM  
    INTERMEDIATE GROOVED
  9N-3059 [3] .25MM  
  9N-3060 [3] .51MM  
    THRUST GROOVED
  9N-3058 [1] .25MM  
  9N-3047 [1] .51MM  
    CYLINDER BLOCK REBORED
    CRANKSHAFT GROUND FOR
    UNDERSIZE BEARING I.D. OF:
    FRONT MAIN NON-GROOVED
  9N-3056 [1] STANDARD (0)  
  9N-3062 [1] .51MM  
    INTERMEDIATE GROOVED
  9N-3051 [3] STANDARD (0)  
    THRUST GROOVED
  9N-3057 [1] STANDARD (0)  
 

#SEBP12260019
 

9N-2133: CRANKSHAFT GP

9N2133 CRANKSHAFT GP
ENGINE S/N 79V4927-8034
c308499 SEBP1226
9N2133 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5793 C [1] BEARING  
2. 9N-5792 C [3] BEARING  
3. 9N-5791 C [1] BEARING  
4. 9N-0304 R [1] CRANKSHAFT ASSEM.  
5. 9N-0299 [1] GEAR (51 teeth)  
6. 9N-6677 C [1] KEY  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation Of 4W6143 Sleeve{1201}
Installation Of 4W6143 Sleeve{1201}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
installation of 9n6275 cylinder sleeve{1222}
installation of 9n6275 cylinder sleeve{1222}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Block Group And Cylinder Block Service Group For 1100, 3100 And 3208 Naturally Aspirated Engines Or 3208 Turbocharged Engines{1200, 1201}
Installation Of Short Block Group And Cylinder Block Service Group For 1100, 3100 And 3208 Naturally Aspirated Engines Or 3208 Turbocharged Engines{1200, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
4.5" BORE, V8 VEHICLE ENGINE (DIRECT INJECTION)
Cylinder Block
3208 VEHICULAR ENGINE
Bearings For Connecting Rods And Mains
3208 VEHICULAR ENGINE
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Crankshaft Main Bearings
225 EXCAVATOR ENGINE
Camshaft Bearings
225 EXCAVATOR ENGINE
Service Magazine
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}
1980/06/02
1980 Caterpillar Remanufactured Products Catalog Is Now Available{0374}
1980/06/23
Resurfaced Cylinder Blocks And Heads{1201,1101,1000}
1982/03/08
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Wider Crankshaft Gear Used{1202,1204,1206}
1982/10/11
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/02/14
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block{1222,1223}
1983/08/08
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Flywheel Housing With 6&deg; Offset Transmission Mounting Holes Must Be Used In GMC Trucks{1000,1157}
1986/06/09
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Engine Cylinder Block Used{1201}
1979/03/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Parts Service Information For Pistons{1214,1225,1331}
1990/05/14
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30

Caterpillar Parts SIS Catalog 225 :

CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3551 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3551 CYLINDER BLOCK GP
1W-0332 ENGINE AR
1W-0332 ENGINE AR
8N-1013 ENGINE AR
8N-1013 ENGINE AR
7N-1643 ENGINE AR
9N-3763 SERVICE GP-CYLINDER BLOCK
9N-2139 BLOCK GP-SHORT
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
9N-5669 CYLINDER BLOCK GP
9N-5190 BLOCK GP-SHORT
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
CAMSHAFT GP-SINGLE
9N-0728 CAMSHAFT GP-SINGLE
CRANKSHAFT BEARING REPLACEMENTS

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.