AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3V5273 FINAL DRIVE GROUP-PART 2 OF 2 SERIAL NO. 51U2832 TO 51U5178 INCLUSIVE NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES 225


POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1226 225 51U   (1972)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GP
3V-5273 FINAL DRIVE GP
FINAL DRIVE GP
3V-5273 FINAL DRIVE GP
FINAL DRIVE GP
3V-5273 FINAL DRIVE GP
FINAL DRIVE GP
3V-5273 FINAL DRIVE GP
FINAL DRIVE GP
6W-3070 FINAL DRIVE GP
 

#SEBP12260420
 

3V-5273: FINAL DRIVE GP

3V5273 FINAL DRIVE GROUP-PART 2 OF 2
SERIAL NO. 51U2832 TO 51U5178 INCLUSIVE
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES
c227891 SEBP1226
3V5273 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-5378 [2] GEAR (36 teeth)  
2. 8K-0577 [2] SPACER  
3. 8K-1749 [2] SHAFT  
4. 1J-2860 [2] CUP  
  1J-4757 [2] CONE  
5. 3V-5380 [2] GEAR (41 & 10 teeth)  
6. 1P-2695 [2] CUP  
  1P-2694 [2] CONE  
7. 1B-3994 C [2] CUP  
  1B-3993 C [2] CONE  
8. 8K-0487 [2] COVER  
  8K-1314 [2] SHIM (use as required)  
9. 2K-8257 [2] SEAL  
10. 0S-1587 [10] BOLT  
  5P-8245 [10] WASHER  
11. 1T-0132 [2] SEAL  
12. 8K-1754 [4] SPACER  
13. 3N-3095 [2] RING  
14. 2K-0439 [2] BOLT  
  4K-0684 [2] WASHER  
15. 8K-0709 [2] SHIM  
16. 8K-1755 [2] RETAINER  
17. 5P-9121 R [2] SEAL GROUP  
    (Each Includes)
  5P-9120 [1] RING  
18. 3V-5083 [2] SPROCKET  
19. 0S-1625 [14] BOLT  
  5P-8247 [14] WASHER  
20. 8K-1756 [2] CAGE  
21. 8K-1316 [2] SHIM  
22. 2P-1373 [2] CUP  
  2P-1374 [2] CONE  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12260421
 

3V-5273: FINAL DRIVE GP

3V5273 FINAL DRIVE GROUP-PART 1 OF 2
SERIAL NO. 51U5179 TO 51U5852 INCLUSIVE
NOTE: QUANITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES
c319284 SEBP1226
3V5273 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1625 [42] BOLT  
  5P-8247 [42] WASHER-HARD  
2. 4B-2363 [2] PLUG-DRAIN  
  6F-4868 [2] GASKET  
3. 5C-6159 C [1] COVER-FINAL DRIVE-RH (R.H.)  
  5C-6160 C [1] COVER-FINAL DRIVE-LH (L.H.)  
4. 2B-7558 C [12] CORK  
5. 2D-9190 [2] CUP-ROLLER BEARING  
  2D-9191 [2] CONE-ROLLER BEARING  
6. 5V-7222 C [2] GEAR-FINAL DRIVE (43 TEETH)  
7. 4V-9236 [2] PLATE-PRESSURE  
8. 7F-6925 [2] RACE & ROLLER AS  
9. 4V-9237 [2] WASHER  
10. 0S-1595 [12] BOLT  
11. 3V-5317 [2] GEAR (13 TEETH)  
12. 008-3214 C [2] RING-RETAINING  
13. 3V-9439 [2] RETAINER AS  
    (EACH INCLDUES)
  0S-0599 [1] PLUG-BORE  
14. 8F-8882 [2] SEAL-O-RING  
15. 3P-8680 [4] CUP-ROLLER BEARING  
  3P-8681 [4] CONE-ROLLER BEARING  
16. 1L-8497 [2] RING-SNAP  
17. 3V-9455 [2] BRACKET AS  
18. 0S-1587 [10] BOLT  
19. 5P-8245 [22] WASHER  
20. 3V-8906 [2] COVER  
  3V-9110 B [2] SHIM-PACK  
21. 7L-3283 [2] CUP-ROLLER BEARING  
  1B-3990 [2] CONE-ROLLER BEARING  
22. 2D-8009 [2] SEAL-O-RING  
23. 2H-3865 [2] PLUG-MAGNETIC  
24. 6V-6640 SEALANT  
25. 2B-7557 C [4] CORK  
26. 5V-7207 C [2] PINION-FINAL DRIVE (10 TEETH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12260422
 

3V-5273: FINAL DRIVE GP

3V5273 FINAL DRIVE GROUP-PART 2 OF 2
SERIAL NO. 51U5179 TO 51U5852 INCLUSIVE
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES
c319285 SEBP1226
3V5273 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-5378 [2] GEAR-OUTPUT (36 TEETH)  
2. 8K-0577 [2] SPACER  
3. 8K-1749 [2] SHAFT-SPROCKET  
4. 1J-2860 [2] CUP-ROLLER BEARING  
  1J-4757 [2] CONE-BEARING  
5. 3V-5380 [2] GEAR-CLUSTER (41 & 10 TEETH)  
6. 1P-2695 [2] CUP-ROLLER BEARING  
  1P-2694 [2] CONE-ROLLER BEARING  
7. 1B-3994 [2] CUP-ROLLER BEARING  
  1B-3993 [2] CONE-ROLLER BEARING  
8. 8K-0487 [2] COVER  
  8K-1314 B [2] SHIM-PACK  
9. 2K-8257 [2] SEAL-O-RING  
10. 0S-1587 [10] BOLT  
  5P-8245 [10] WASHER  
11. 1T-0132 [2] SEAL-O-RING  
12. 8K-1754 [4] SPACER  
13. 3N-3095 [2] RING-SEALING  
14. 2K-0439 [2] BOLT  
  4K-0684 [2] WASHER-HARD  
15. 8K-0709 [2] SHIM-PACK  
16. 8K-1755 [2] RETAINER-CAP  
17. 5P-9121 R [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  5P-9120 [1] RING-SEALING  
18. 3V-5083 [2] SPROCKET-TRACK  
19. 0S-1625 [14] BOLT  
  5P-8247 [14] WASHER-HARD  
20. 8K-1756 [2] CAGE-BEARING  
21. 8K-1316 [2] SHIM-PACK  
22. 2P-1373 [2] CUP-ROLLER BEARING  
  2P-1374 [2] CONE-ROLLER BEARING  
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12260423
 

6W-3070: FINAL DRIVE GP

6W3070 FINAL DRIVE GROUP-PART 1 OF 2
S/N 51U5853-UP
c333706 SEBP1226
6W3070 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1625 [42] BOLT  
  5P-8247 [42] WASHER-HARD  
2. 4B-2363 [2] PLUG-DRAIN  
  6F-4868 [2] GASKET  
3. 5C-6159 [1] COVER-FINAL DRIVE-RH  
  5C-6160 [1] COVER-FINAL DRIVE-LH  
4. 2B-7558 [12] CORK  
5. 2D-9190 [2] CUP-ROLLER BEARING  
  2D-9191 [2] CONE-ROLLER BEARING  
6. 5V-7207 [2] PINION-FINAL DRIVE (10 TEETH)  
7. 4V-9236 [2] PLATE-PRESSURE  
8. 7F-6925 [2] RACE & ROLLER AS  
9. 4V-9237 [2] WASHER  
10. 0S-1595 [12] BOLT  
11. 3V-5317 [2] GEAR (13 TEETH)  
12. 008-3214 [2] RING-RETAINING  
13. 3V-9439 [2] RETAINER AS  
    (EACH INCLUDES)
  0S-0599 [1] PLUG-BORE  
14. 8F-8882 [2] SEAL-O-RING  
15. 3P-8680 [4] CUP-ROLLER BEARING  
  3P-8681 [4] CONE-ROLLER BEARING  
16. 1L-8497 [2] RING-SNAP  
17. 3V-9455 [2] BRACKET AS  
18. 0S-1587 [10] BOLT  
19. 5P-8245 [22] WASHER  
20. 3V-8906 [2] COVER  
  3V-9110 B [2] SHIM-PACK  
21. 7L-3283 [2] CUP-ROLLER BEARING  
  1B-3990 [2] CONE-ROLLER BEARING  
22. 2D-8009 [2] SEAL-O-RING  
23. 2H-3865 [2] PLUG-MAGNETIC  
24. 6V-6640 B SEALANT  
25. 2B-7557 [4] CORK  
  B   USE AS REQUIRED
 

#SEBP12260424
 

6W-3070: FINAL DRIVE GP

6W3070 FINAL DRIVE GROUP-PART 2 OF 2
S/N 51U5853-UP
3T9152 RIM-TRACK SPROCKET IS AVAILABLE
c333707 SEBP1226
6W3070 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-5378 [2] GEAR-OUTPUT (36 TEETH)  
2. 8K-0577 [2] SPACER  
3. 8K-1749 [2] SHAFT-SPROCKET  
4. 1J-2860 [2] CUP-ROLLER BEARING  
  1J-4757 [2] CONE-BEARING  
5. 3V-5380 [2] GEAR-CLUSTER (41 & 10 TEETH)  
6. 1P-2695 [2] CUP-ROLLER BEARING  
  1P-2694 [2] CONE-ROLLER BEARING  
7. 1B-3994 [2] CUP-ROLLER BEARING  
  1B-3993 [2] CONE-ROLLER BEARING  
8. 8K-0487 [2] COVER  
  8K-1314 B [2] SHIM-PACK  
9. 2K-8257 [2] SEAL-O-RING  
10. 0S-1587 [10] BOLT  
  5P-8245 [10] WASHER  
11. 1T-0132 [2] SEAL-O-RING  
12. 8K-1754 [4] SPACER  
13. 6W-1461 [2] CAP  
14. 2K-0439 [2] BOLT  
  4K-0684 [2] WASHER-HARD  
15. 4K-9538 [2] SEAL-RING  
16. 1D-4608 [16] BOLT  
  5P-8248 [16] WASHER-HARD  
   
   
17. 5P-9121 R [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  5P-9120 [1] RING-SEALING  
18. 6W-2451 [2] SPROCKET-TRACK  
19. 0S-1625 [14] BOLT  
  5P-8247 [14] WASHER-HARD  
20. 8K-1756 [2] CAGE-BEARING  
21. 8K-1316 [2] SHIM-PACK  
22. 2P-1373 [2] CUP-ROLLER BEARING  
  2P-1374 [2] CONE-ROLLER BEARING  
23. 5V-7222 [2] GEAR-FINAL DRIVE (43 TEETH)  
24. 6W-1451 [2] COLLAR  
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12260425
 

4V-9296: FINAL DRIVE GP

4V9296 FINAL DRIVE GROUP-PART 1 OF 2-TYPE 1
SERIAL NO. 51U2832-UP
PART OF 3V9713 UNDERCARRIAGE FRAME
AN ATTACHMENT
c220331 SEBP1226
4V9296 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7558 [10] CORK  
2. 5M-1176 R [2] SEAL GROUP  
  2M-0344 [2] RING  
3. 2M-1309 [2] SEAL  
4. 0S-1589 [12] BOLT  
5. 3B-4510 [68] LOCKWASHER  
6. 1P-5420 [2] CUP  
  1P-5419 [2] CONE  
7. 8K-2732 [2] PINION (13 teeth)  
8. 4B-2363 [2] PLUG  
  6F-4868 [2] GASKET  
9. 0S-1594 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
10. 8K-3587 [2] COVER  
11. 8K-3584 [2] VALVE (relief)  
12. 2B-7557 [4] CORK  
13. 0S-1585 [10] BOLT  
  3B-4508 [10] LOCKWASHER  
14. 8K-4850 [2] CAGE  
15. 8M-3837 [2] PLUG  
  6K-5551 [2] GASKET  
16. 8S-9092 [56] BOLT  
17. 4V-9293 [1] COVER (L.H.)  
  4V-9292 [1] COVER (R.H.)  
18. 1P-2697 [2] CUP  
  1P-2696 [2] CONE  
19. 2K-2939 [2] SEAL  
20. 8K-1727 [2] SHIM PACK 2.2 mm(.088 in.) thick  
21. 8K-2731 [2] GEAR (45 teeth)  
22. 7M-7260 LIQUID GASKET  
23. 8K-2730 [2] GEAR (46 teeth)  
24. 9K-8502 [2] CAGE  
25. 9K-8525 [2] SHIM PACK 2.8 mm(.112 in.) thick  
26. 9S-8010 [2] PLUG  
  2S-4078 [2] SEAL  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12260426
 

4V-9296: FINAL DRIVE GP

4V9296 FINAL DRIVE GROUP-PART 2 OF 2-TYPE 1
SERIAL NO. 51U2832-UP
PART OF 3V9713 UNDERCARRIAGE FRAME
AN ATTACHMENT
c220332 SEBP1226
4V9296 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8K-2743 [2] SPROCKET  
2. 8K-2744 [2] SPACER  
3. 1A-8063 [6] BOLT  
  2S-0115 [6] WASHER  
4. 9K-8501 [2] RETAINER  
5. 9K-8498 [2] SHIM PACK 2.54 mm(.1 in.) thick  
6. 9S-3888 [2] SEAL  
7. 8K-2738 [2] GEAR (45 teeth)  
8. 5P-0177 [2] RACE (inner)  
  2F-9063 [2] RACE AND ROLLER ASSEM. (outer)  
9. 8K-2733 [2] PINION (12 teeth)  
10. 1A-2029 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
11. 3F-6605 [2] SEAL  
12. 8K-2745 [2] PLUG  
13. 9K-8503 [2] CAGE  
14. 8K-2747 [2] GASKET  
15. 1F-7961 [2] WASHER  
16. 5B-7267 [4] CORK  
17. 9K-8499 [2] SHIM PACK 2.54 mm(.1 in.) thick  
18. 5H-5672 [2] SEAL  
19. 1T-0299 [2] CUP  
  1T-0163 [2] CONE  
20. 8K-3718 [2] PINION ASSEM. (13 teeth)  
21. 8H-8175 [1] BEARING  
22. 1P-2636 [2] CUP  
  1P-2662 [2] CONE  
23. 8K-2079 [20] SPRING  
24. 8K-3289 [2] COUPLING  
25. 8K-3290 [2] ROD  
  2K-0337 [2] LOCKNUT  
26. 2D-8540 [2] SEAL  
27. 9S-8005 [2] PLUG  
  3K-0360 [2] SEAL  
28. 4D-3155 [2] RACE AND ROLLER ASSEM. (outer)  
  4K-7296 [2] RACE (inner)  
29. 4V-5765 [2] SHAFT  
30. 2P-1373 [2] CUP  
  2P-1374 [2] CONE  
31. 9K-8500 [2] SPACER  
32. 2J-2152 [2] CUP  
  1B-6577 [2] CONE  
 

#SEBP12260427
 

4V-9296: FINAL DRIVE GP

4V9296 FINAL DRIVE GROUP-PART 1 OF 2-TYPE 2
SERIAL NO. 51U2832-UP
PART OF 3V9713 UNDERCARRIAGE FRAME
AN ATTACHMENT
c311522 SEBP1226
4V9296 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7558 F [10] CORK  
2. 9G-5315 [2] SEAL GP-DUO-CONE  
  2M-0344 [2] RING-SEALING  
3. 2M-1309 [2] SEAL-O-RING  
4. 0S-1589 C [12] BOLT  
5. 2S-0736 [68] WASHER-HARD  
6. 1P-5420 [2] CUP-ROLLER BEARING  
  1P-5419 [2] CONE-ROLLER BEARING  
7. 8K-2732 C [2] PINION-FINAL DRIVE (13 TEETH)  
8. 4B-2363 [2] PLUG-DRAIN  
  6F-4868 [2] GASKET  
9. 0S-1594 [4] BOLT  
  5M-2894 [4] WASHER  
10. 8K-3587 [2] COVER  
11. 8K-3584 [2] VALVE-RELIEF (RELIEF)  
12. 2B-7557 C [4] CORK  
13. 0S-1585 [10] BOLT  
  5P-7213 [10] WASHER-HARD  
14. 8K-4850 [2] CAGE-BEARING  
15. 8M-3837 [2] PLUG  
  2A-3398 C [2] GASKET  
16. 8S-9092 [56] BOLT  
17. 4V-9293 [1] COVER (L.H.)  
  4V-9292 C [1] COVER (R.H.)  
18. 1P-2697 [2] CUP-BEARING  
  1P-2696 [2] CONE-BEARING  
19. 2K-2939 [2] SEAL-O-RING  
20. 8K-1727 [2] SHIM-PACK  
    2.2MM(.088IN.)THK
21. 8K-2731 [2] GEAR (45 TEETH)  
22. 7M-7260 LIQUID GASKET  
23. 8K-2730 [2] GEAR-OUTPUT (46 TEETH)  
24. 9K-8502 [2] CAGE-BEARING  
25. 9K-8525 [2] SHIM-PACK  
    2.8MM(.112IN.)THK
26. 9S-8010 [2] PLUG-O-RING  
  2S-4078 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#SEBP12260428
 

4V-9296: FINAL DRIVE GP

4V9296 FINAL DRIVE GROUP-PART 2 OF 2-TYPE 2
SERIAL NO. 51U2832-UP
PART OF 3V9713 UNDERCARRIAGE FRAME
AN ATTACHMENT
c311523 SEBP1226
4V9296 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-4969 C [2] SPROCKET-TRACK  
2. 8H-0273 C [2] SEAL-O-RING  
3. 1J-2921 C [2] BOLT  
  3S-6162 C [2] WASHER-HARD  
4. 3V-5119 C [2] RETAINER  
5. 3V-5122 C [2]  
    3.05MM(.120IN.)THK
6. 3V-5129 C [2] SEAL-RING  
7. 8K-2738 [2] GEAR (45 TEETH)  
8. 5P-0177 [2] RACE-BEARING-OUTER (INNER)  
  2F-9063 [2] BEARING-INNER  
    (OUTER)
9. 8K-2733 [2] PINION (12 TEETH)  
10. 1A-2029 [12] BOLT  
  5M-2894 C [12] WASHER  
11. 3F-6605 [2] SEAL-LIP TYPE  
12. 8K-2745 [2] PLUG  
13. 9K-8503 [2] CAGE-BEARING  
14. 8K-2747 [2] GASKET  
15. 7M-2360 C [2] WASHER  
16. 5B-7267 [4] CORK  
17. 9K-8499 [2] SHIM-PACK 2.54MM(.1IN.)THK  
18. 5H-5672 [2] SEAL-O-RING  
19. 1T-0299 [2] CUP-ROLLER BEARING  
  1T-0163 [2] CONE-ROLLER BEARING  
20. 8K-3718 [2] PINION AS (13 TEETH)  
21. 8H-8175 [1] BEARING  
22. 1P-2636 [2] CUP-ROLLER BEARING  
  1P-2662 [2] CONE-ROLLER BEARING  
23. 8K-2079 [20] SPRING-DISC  
24. 8K-3289 [2] COUPLING-INPUT  
25. 8K-3290 [2] ROD  
26. 2D-8540 [2] SEAL-LIP TYPE  
27. 9S-8005 [2] PLUG-O-RING  
  3K-0360 [2] SEAL-O-RING  
28. 4D-3155 [2] BEARING-INNER  
    (OUTER)
  4K-7296 [2] RACE-ROLLER BRG (INNER)  
29. 4V-5771 C [2] SHAFT-SPROCKET  
30. 2P-1373 [2] CUP-ROLLER BEARING  
  2P-1374 [2] CONE-ROLLER BEARING  
31. 9K-8500 [2] SPACER  
32. 2J-2152 [2] CUP-ROLLER BEARING  
  1B-6577 [2] CONE-ROLLER BEARING  
33. 6B-6682 C [2] NUT-FULL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12260429
 

4V-9296: FINAL DRIVE GP

4V9296 FINAL DRIVE GROUP-PART 1 OF 2-TYPE 3
SERIAL NO. 51U2832-UP
PART OF 3V9713 UNDERCARRIAGE FRAME
AN ATTACHMENT
c318523 SEBP1226
4V9296 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7558 [10] CORK  
2. 9G-5315 [2] SEAL GP-DUO-CONE  
  2M-0344 [2] RING-SEALING  
3. 2M-1309 [2] SEAL-O-RING  
4. 0S-1589 [12] BOLT  
5. 2S-0736 [68] WASHER-HARD  
6. 1P-5420 [2] CUP-ROLLER BEARING  
  1P-5419 [2] CONE-ROLLER BEARING  
7. 8K-2732 [2] PINION-FINAL DRIVE (13 TEETH)  
8. 4B-2363 [2] PLUG-DRAIN  
  6F-4868 [2] GASKET  
9. 0S-1594 [4] BOLT  
  5M-2894 [4] WASHER  
10. 8K-3587 [2] COVER  
11. 8K-3584 [2] VALVE-RELIEF (RELIEF)  
12. 2B-7557 [4] CORK  
13. 0S-1585 [10] BOLT  
  5P-7213 [10] WASHER-HARD  
14. 8K-4850 [2] CAGE-BEARING  
15. 8M-3837 [2] PLUG  
  2A-3398 [2] GASKET  
16. 8S-9092 [56] BOLT  
17. 8V-2381 C [1] COVER-FINAL DRIVE (L.H.)  
  8V-2382 C [1] COVER-FINAL DRIVE (R.H.)  
18. 1P-2697 [2] CUP-BEARING  
  1P-2696 [2] CONE-BEARING  
19. 2K-2939 [2] SEAL-O-RING  
20. 8K-1727 [2] SHIM-PACK  
    2.2MM(.088IN.)THK
21. 8K-2731 [2] GEAR (45 TEETH)  
22. 7M-7260 LIQUID GASKET  
23. 8K-2730 [2] GEAR-OUTPUT (46 TEETH)  
24. 9K-8502 [2] CAGE-BEARING  
25. 9K-8525 [2] SHIM-PACK  
    2.8MM(.112IN.)THK
26. 9S-8010 [2] PLUG-O-RING  
  2S-4078 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Specifications
Final Drive<BR> (8K175)
225 EXCAVATOR HYDRAULIC SYSTEM
Final Drive<BR> (8K175-Right Side) (8K176-Left Side)
225 EXCAVATOR HYDRAULIC SYSTEM
Final Drive<BR> (3V5273) (on machines 51U2832-Up and 76U1649-Up)
225 EXCAVATOR HYDRAULIC SYSTEM
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Thermal Spray Procedures of Sprocket Supports for Certain Track-Type Tractors (TTT) {0374, 0599, 0679, 4050}
Thermal Spray Procedures of Sprocket Supports for Certain Track-Type Tractors (TTT) {0374, 0599, 0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Sprockets
225 EXCAVATOR VEHICLE SYSTEMS
Final Drives
225 EXCAVATOR VEHICLE SYSTEMS
Sprockets
225 EXCAVATOR VEHICLE SYSTEMS
Final Drives
225 EXCAVATOR VEHICLE SYSTEMS
Service Magazine
SAE 30 Oil Now Used In Swing Drive And Final Drive{5459,4070}
1980/02/25
Replacement Sprocket Rim Available{4156,4164}
1982/09/20
Correct Installation Of Sprocket In Final Drive{4164,4058,0374}
1982/11/15
Add Oil Any Time Track Motor, Parking Brake Or Final Drives Are Installed{4055,4070,4353,4351}
1984/11/19
Tapered Splined Sprockets And Shafts Can Be Used{4164,4050}
1985/03/18
New Collet-Type Collar Used To Fasten Sprocket To Final Drive{4156,4164,4184,4058}
1985/03/18
Different Sealant And Higher Bolt Torque Used In Final Drive{4074,4050}
1986/03/10
Changes To Final Drive Pressure Relief Fittings{4059,4500}
1986/04/28
Check Bolt Torque On Excavators Equipped With Collar-type Sprocket Assemblies{4164,4184,7522}
1990/05/14
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Managing the Life Cycles of Excavator Final Drives {4050}
2007/07/16
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Final Drive Motor Housings Are Available for Certain Excavators {4050}
2015/04/09
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 225 :

FINAL DRIVE GP
3V-5273 FINAL DRIVE GP
BRAKE GP-PARKING
6W-4584 BRAKE GP-PARKING
BRAKE GP-PARKING
7V-9957 BRAKE GP-PARKING
BRAKE GP-PARKING
8K-2634 BRAKE GP-PARKING
BRAKE GP-PARKING
6W-1445 BRAKE GP-PARKING
BRAKE GP-PARKING
3V-9163 BRAKE GP-PARKING
BRAKE GP-PARKING
3V-9163 BRAKE GP-PARKING
HARNESS AS-WIRING
3V-9024 HARNESS AS-WIRING
FINAL DRIVE GP
3V-5273 FINAL DRIVE GP
FINAL DRIVE GP
3V-5273 FINAL DRIVE GP
FINAL DRIVE GP
6W-3070 FINAL DRIVE GP
FINAL DRIVE GP
6W-3070 FINAL DRIVE GP
FINAL DRIVE GP
4V-9296 FINAL DRIVE GP
FINAL DRIVE GP
4V-9296 FINAL DRIVE GP
FINAL DRIVE GP
4V-9296 FINAL DRIVE GP
FINAL DRIVE GP
4V-9296 FINAL DRIVE GP

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.